Monitors-windows double jumps between monitors

Similar Questions

• Windows 8 to jump between Metro UI and the office at startup.

  This morning, I turn on my laptop HP ENVY-M6. Booted up fine, except he was stuck on the home screen when I connect. So I held the power button to stop it. I tried to start it again. He started, but when I proceed to log in the background color is different than the one I took. After leaving the Welcome screen, he jumped between the metro UI screen and a black screen with a bar gray at the bottom. The screen of the metro UI has also much lower tiles that I remember.

  Please help because I have to use the laptop of the future.
  Hello
   
  Follow the troubleshooting methods listed here.
   
  Method 1
   

  Step 1: Put the computer in safe mode with networking

  With the parameters of Windows startup screen (formerly advanced startup options), you can start Windows in different advanced troubleshooting modes, so you can find and fix problems on your PC. In previous versions of Windows, you might get to the screen by pressing F8 before Windows starts. 8PCs Windows start quickly so there is not enough time to press F8.

  Follow the steps in the link below.

  http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

  If the computer works properly, please perform the following step.

  Step 2: Put the computer to boot and search for the issue.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem

  Method 2:

  Step 1: Follow the steps in the method 1 step 1 to start the computer in safe mode with network and then follow the steps given below.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: during the analysis of the disk hard if bad sectors are found, the parser attempts to repair this area, all available on which data may be lost.

  Step 2: analyze and run Windows Defender in offline mode.

  Windows Defender offline can help eliminate these hard to find malicious and potentially unwanted programs using definitions that recognize the threats. Definitions are files that provide an encyclopedia of potential software threats. Follow the steps in the link here. Download the appropriate file depending on the version of bits in your computer.

  
  What is Windows Defender in offline mode?

  http://Windows.Microsoft.com/en-GB/Windows/what-is-Windows-Defender-offline

  
  Important: during the analysis of the disk hard if bad sectors are found, the parser attempts to repair this area, all available on which data may be lost.
   
   
  Method 3: Create a new user account and then check the issue.
   
  Follow jhere steps to create another user account. After you have created the new cheque from account for the issue and follow the steps here to transfer the settings from the old account.
   

  The steps given here are valid only if your computer is not on the field or the working group.

  (a) press Windows W + X Key. Click on Control Panel.

  b) under the View tab unchecked Hide protected operating system files and Hide extensions of known file types.

  c) go to the location

  C:\Users\(Your-old-Profile-Name)-.

  C: may be different according to the drive where you installed Windows 8.

  (d) copy all files except three files:

  NtUser.dat
          NtUser.ini
          NtUser.log

  If you can't find the last file, then there will be two log file with . Log1 and . Log2 extensions.

  e) go C:\Users\(New-User-Profile-name)-

  (f) paste all files copied here.

  (g) now delete the old profile. You have transferred all the information and the profile settings corrupted to the newly created user profile successfully.

   
   
  Write to us if you're still having problems. We will help you.

• FF jump between tabs if I have several open at the same time and it sometimes seems to be trying to load the same page one above the other

  When running FF for awhile, it starts to jump between different tabs I have open without clicking anything whatsoever. Also, it will sometimes appear that another copy of the same tab I have open try to open again at the top of page. The address bar that appears at the bottom of page loading will appear one above the other and the page will jump up and down about a 1/8th of an inch. Out of the enclosure, then by restarting FF does not solve the problem. I have to restart the computer and then restart FF for him to quit.

  I changed to Chrome and it doesn't, but I prefer the FF browser so I can get this fixed number.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• The last time I used identifier apple of my father to the appstore on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to sign identifying apple of my father, but I want

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

• Window front jumping up and down (LabView 2010 SP 1)

  I have a bug problem with dynamically opening and running a VI.

  The VI below is compiled into a DLL:

  

  With that, I opened a secondary VI to display the results. That VI is called multiple times in a loop. It works fine, but I was annoyed by the flashing of the menu bar and the toolbar. That's why I added the 'FP. ShowMenuBar' and 'to. Visible' to hide those. This causes the Panel window before jumping up and down on my screen. Is this a known bug (I presume it is) and is there a work around?

  One other minor annoyance is that open the front panel, close it and then open it again cause the façade to be open in the background, and I have to manually move it to the foreground. I thought it might be remedied by adding "FP. IsFrontmost', but it does nothing.

  OK, I did the VI reentrant and added the option "prepared for reentrant run" in the box "open VI Reference. This is the VI opened as a clone and stop the blinking of the menu and toolbar.

  As a bonus, the CPU dropped load. (But I do not see why).

  The façade positioning mind again, but did not understand.

• Windows XP Media between 32-bit and 64-bit versions?

  original title: Windows XP Media bit versions

  Windows XP Media between 32-bit and 64-bit versions?  I think I have 32 bit, but not to the House to check.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Only 32-bit.

• screen jumps between 100% and 400%, how can I stop?

  My computor screen jumps between 100% and 400%, how can I stop?

  In internet explorer.  I checked to see if the magnifying glass was on it is not checked.   I just bought new a moniter.   Changed the back of the mouse to connect to see if wireless was the problem.  He jumps to nearly 400% at the top of the screen on the top 4 ".  I am running Vista Home Premium.  Thanks for your help and Merry Christmas!

• I can not disable on Windows 7 jump lists.

  I can not disable on Windows 7 jump lists. I unchecked the box properties of the system, but the jumplists show always upward. How can I disable the jumplist?

  You say jump lists do not display files recently opened by a particular program, but the jump list itself cannot be disabled.  These lists were built by the creator of program that allow you of "jump right in" a task such as right-clicking on the mail program allows you to instantly create a new email without having to open the program first of all of the tasks.

• Replace the previous Question on Windows 7 jump lists

  Previous question incorrectly referred to as Windows 7 Jump Lists rather than the Start menu lists.  I tried to delete it, but could not... Please disregard.  It is corrected below:

  With the Windows 7 Start Menu, number of items in the list of the default Start Menu is set to 10.  There are currently 10 applications in this list.  When I opened an application 11, different from those in the list on the Start Menu, I expected to be added to the list with the oldest list entry being deleted (by example, most recent, most former fate).  This was not the case.  When I click an app (PPT 2007) from the desktop, regardless of how many times I opened it, it was not added to the list of the Start Menu.  Only after you open in the all programs list it has been added to this list.  In addition, no matter how many times I opened Windows Explorer, whether by the bar of tasks or in the list of all programs, it is not added to the list of the Start Menu.

  The Microsoft online help States the following on the list from the Start Menu:

  "You will notice that, over time, the lists of the programs in your Start menu change. This happens for two reasons. First of all, when you install new programs, they have added to the list of all programs. Second, the start menu detects the programs you use the most and places them in the left pane for quick access. »

  First of all, what is adding programs to the list of all programs has to do with the list of the Start Menu?  If I install a new application, is automatically added to the start menu?  Second, what are the programs will be added to the list of the Start Menu?  You have to open 'x' repeatedly to be added to the list?  Are there exceptions to what is added to the list and if so, what are those exceptions?

  If someone can explain the details of how the list of the Start Menu is supposed to behave, I would be very grateful.  At the moment it seems inconsistent.  All of the default settings in the Start Menu properties that affect the lists are active (for example; ("Store and display recently opened programs in the menu start" and "Store and display recently opened items in the start menu and taskbar" is selected both).

  Thanks much for any help.

  LPS

  If you click on the Customize button you will see this below,

  

• is it far to disable the shortcut ctrl-alt-tab on windows 7 (cycle between windows) to avoid the substitution of this same shortcut (indented) in excel?

  is it far to disable the shortcut ctrl-alt-tab on windows 7 (cycle between windows) to avoid the substitution of this same shortcut (indented) in excel?

  Hello
   
  The feature you're talking about is the default value of design in Windows 7. If you have comments or suggestions, you can post your query to the Windows 7 feedback forum.

   
  http://mymfe.Microsoft.com/Windows%20%207/feedback.aspx?formid=195

• My InDesign (UI) windows keeps jumping from the top to half way down on my second monitor

  Maybe it's since I did the update OS X - Yosemite 10.10.2

  My windows, as configured in my workspace, now jumps to the top of my screen halfway around, making all the windows in the lower half off screen and useless.

  I'll have to use a projection of the most used windows to half way down to prevent their jump.

  I have three monitors and it happens on the second and the third.

  I have a Wacom tablet, but have disconnected it and it doesn't seem to help.

  I threw the preferences, but it makes no difference.

  Adobe (Adobe people who count) product managers generally do not read this forum. You must post here:

  Adobe - feature request/Bug Report Form

• Output VGA jumps between external monitor and Satellite L505

  I have a Satellite L505-144 related to an external VGA monitor via a KVM Aten 2-way switch.

  Intermittently on the screen of the external monitor black background, the image will transfer to the screen of the laptop for a second before returning to the external display. This does not seem to be triggered by any particular measure of keyboard or mouse and doesn't seem to be time bound.

  The keyboard and mouse connected to the KVM seem unaffected. I have the latest video bios motherboard and all the latest drivers Toshiba comes out loaded.
  To test the KVM I connected a Toshiba NB200 L505, stops problem instead, replace the L505, it comes back.

  The question is not performed by the presence of a second PC connected to the KVM. I have tried with a second PC on and outside, connected and unconnected, is still no change in the problem.

  I spent the autour KVM cables and the problem persists and follows the L505. If I connect the L505 directly to monitor the problem disappears!
  I find its a problem between the KVM and the L505.

  Is there a known fix or get around it?
  Is there a guarantee if I get a Belkin KVM say this question with the L505 will not happen with this material as well?

  At first, I have to say that I n t believes that Toshiba offers fix for this. Toshiba doesn't support the use of third-party products part so if there are a few possible correction or bypass ATEN ought to know this.

  Connect any external devices you use directly on your Satellite L505, try features and let us know f you have a problem similar or any other.

• Why msn for windows 8 jumps on the right side of the screen

  Suddenly, when I go on msn.com and when he opens the entire screen goes to the right of the screen. Help, please!

  Hello

  Thanks for posting your question in the Microsoft Community forum. I understand that the msn window jump on the right side of the screen. I guess this must be difficult for you. I would like to help solve you the problem.

  Before troubleshooting, provide us with information.

  1. What is the brand and model of the computer?

  2. do you have a dual monitor attached?

  3. what security software is installed?

  4 is the issue limited to msn.com Web site?

  5. the problem occurs with modern version of Internet Explorer or Internet Explorer desktop user interface?

  6. don't you make changes to the computer before the show?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Thank you.

• Qosmio G55 - remote control selection double jumps

  On my Qosmio G55 when I use the remote control to go to the left or right for a selection in double, he jumps as its more sencertive and I can not choose what I want a lot of the time.

  This happens in windows 7 media Center.
  So is there a fix for this and if not is the toshiba MODEL No.: G83C0008A210 remote control compatible with this laptop?

  Thanks to anyone who can help me with this annoying problem.

  I'm glad to hear it. :)

• Update Windows 10 jumps of wifi on model-end MBP

  Hi all

  I use the 10 Windows via Boot Camp on my rMBP mid-2015.  No problems with it... up to 10 Windows did an update yesterday.  I use Windows on a daily basis for various things, so I guess it's a very recent update and not something that I missed.

  It was a big update, when the computer restarted, I got a bunch of new HOME screens who assured me that all my files are in the same place.  How reassuring.

  In any case, everything seems to work fine except my ability to stay on a wifi network.  It connects fine, seems to work, but after a variable duration (15 minutes is the maximum), the WiFi falls down, and the icon of wifi in the status bar in low pass to a monitor icon and cable, I guess because Windows tries to use an ethernet connection that does not exist.

  I have tried several things to remedy the situation, all to nothing does not.  The first is to use the Boot Camp Assistant to redownload drivers Windows Support and I reinstalled the.  No change.  I called the Apple support, who recommended a SMC reset, I did.  They also recommended asking the support of Windows, who told me it was my internet provider, which I don't see how this is the case.  I called Apple, and of COURSE with the tech remoting in, the connection was stable.  As soon as I got the phone is off, he went down again.

  A couple of times, I've seen an error message in Windows that said, I think, svchost crashed.  I googled questions with svchost, but most of these links lead to the software I can buy to let someone remote in and do something.  Ugh.  I don't know that wifi was not a problem, because with my iPad, I can confirm that wifi is in fact even when these problems occur, and I have strong connections in Mac OS.

  I'm not super savvy Windows, so I don't really know what else to do.  Any suggestions would be greatly appreciated.  If any other information would be useful, I would be happy to provide it.

  Stuart

  Please see Re: WiFi issues on 10 of Windows using boot camp .