Monthly survey

Similar Questions

• Comparison of the AP for site survey

  Hi guys,.

  Don't know if this is a repost, haven't seen my old post go up again...

  I had to do a site survey in the coming months, and I was wondering what is the difference in making the survey with a different access point which must be installed. When I say different, its not going to be a too different AP!

  The client goes with of 1242 once the investigation is complete, but I 1231 and 1130's use to the investigation.

  I looked at records and didn't see too much difference between the 3 models, when using standard antennas, they will use in the end.

  Would that be acceptable?

  Thanks in advance

  Mike

  For a simple field measurement, everything boils down to three things; the antenna, the output of the transmitter and the receiver sensitivity and selectivity.

  Of the three, most likely to be Variant are the receiver... especially because the radio components may vary and be better (yay technology!) or worse (f ' n beancounters do things cheaper construction).

  Sensitivity improved without improving the selectivity would be a bad thing (like having a great amplifier open... noise gets amplified too). Selectivity is the ability of a receiver to discern the desired signal and interfering noise-type spectrum which also includes other issuers.

  As long as these three essential characteristics are substantially similar, the results of the investigation of the site will be substantially similar.

  Even if the features are not the same, if you know what they are, you can calculate the compensation, adjust the equipment or add additional "fudge factor."

  IMO, given the State of the hardware of today, if the antennas are the same (type and substantially similar Smith maps - radiation diagrams), you will get a valid poll.

  Good luck

  Scott

• want to cancel my monthly plan, but your records indicate that I don't have a plan! Still $24.99 is being charged on my credit card every month! Help!

  I used the Adobe product that can modify a PDF file. I need is no longer this plan as my graphic designer left the company. On my credit card statement, I have the following numbers: 44-207-3650 ILIE Adobe Systems Software $ 24.99 (AUD)

  Ive tried to cancel online, but your site suggests that I don't actually have a monthly! How is it possible that I had to pay for almost 12 months.

  The Adobe ID here is forums has no registration order, in the event that you are unable to find the order, please message me the following details in personal message.

  The last 4 digits of credit card.

  Expiration date.

  The name of the cardholder.

  Date where you are charged.

  Type of credit card(MasterCard/visa/Amex)

  I can get a survey for you. It could be a case of impersonation.

  Concerning

  Stéphane

• How to convert Date months in the database that points to the EBS, DWH not.

  Hi friends,
  
  We intend to create reports in OBIEE and the Source is EBS. This means that we do not want depends on Datawarehouse and Informatica and OBIApps. Simply create us some reports and that they refer to the EBS database.
  
  End of test, we took an HR report and it contains under columns:
  
  Months (Sun)
  Revenue by Division (Fact)
  Average cost per numbers of workforce (Fact)
  
  In my little survey, we found that the income column is of EBS: GL_BALANCES. And we have configured the base of W_Day_D table in DAC has no column months in EBS (not sure).
  
  Come to my problem, how can I call the month column in my data base stressed EBS. How to convert the Date months in my database.
  
  I can deceive me, but someone please look into this... How can I create columns for this exact report of OBI in EBS database instead of DwH.
  
  Thanks in advance...
  
  Raghu Jen7782

  Just confused here.

  Hang on, if I get it, you want to create report based on columns of EBS directly then using rt BI applications?

  There is then no question of using the W_DAY_D table then.

  Follow

  As long as you have Date column, you can use DB functions to convert them into months (just use the string SUBSTR to extract the month and the year).
  Create your own query instead of using the tables of BI APPS and try to bring a hybrid product.

  Sorry I'm wrong in the understanding of your needs, if I had properly then do the steps above.

  Mark correct or useful if this can help,

  Kind regards
  Rayan Vieira

• Reorganization of images in survey mode

  What are the restrictions on images in survey mode rearraging? I couldn't understand why it would work cotton and sometimes does not.

  For example, I have a directory up the 2012 main page and in a folder for each month. If I'm in the display of the GRID to the 2012 level and choose the images in survey mode, I can't reorganize. But I'm in the display of the GRID in one of the subfolders, then I can.

  Is this normal? I'm doing something wrong?

  Mode of inquiry honors the same constraints that grid mode. If you can reorganize in the grid, you can in the investigation if:

  Records with no record of the child can be rearranged

  Collections can be organized (includes quick Collection)

  Smart collections cannot

  Parent folders cannot

  The collection sets cannot

• tests 3 months

  I just enjoy the three-month trial. Does include the free downloading of music?

  Yes, but once the trial is over, you must be a paid member to play any music that you have downloaded through the test.

  (145150)

• Pedometer in health app inaccurate since ios10.02 update and followed by the month and the year disappeared. Why?

  I used the pedometer in the application of health that accompanies the iPhone6 for 18 months. I walk on a treadmill each morning for the same distance and time. The number of step was close enough for more than a year, but then I updated to ios10.02 and the count has been reduced by more than 2500 steps every day for the same duration of time and distance on the treadmill. He remained much lower now for two weeks. I also notice that the dashboard no longer offers a total annual and medium, or monthly. Is there a fix to come or was the unit off so much for the previous year?

  kjm2222 wrote:

  I also notice that the dashboard no longer offers a total annual and medium, or monthly.

  You can still access graphics monthly and annual. In the form of health data, press activity. Swipe to today. Tap measures. You will then see a graph and a bar with options to choose to see it in days, months, or year. This works with any metric system.

• Bug in iOS Schedule 10: jumps to two months

  Presently I found what seems to be a bug in iOS 10 calendar: sometimes, when choosing a certain day in the month view + list of activities below, the real selected jumps from day to another month, which is currently not displayed on the screen. Then the red circle suddenly disappeared from the current month and jump out of view to a different month (usually 1 month in the future).

  Anyone else having this problem? I use iCloud for calendar synchronization.

  I did not have this experience so far.  This - try restarting your iPhone, iPad or iPod touch - Apple Support

• Calendar is the name of the month showing

  This is a new, just started my laptop this morning and the menu bar showed M10 5 sea, which is also how it looks in the calendar. All other months are the same (M01, M02, etc.).

  Tried resetting the PRAM, but can't see any prefs calendar that I needed trash as the only one is the synchronization agent.

  Anyway to get my laptop to remember what it October again? Do not know if it is connected but it also completely forgotten that I have my trackpad tap to click and three fingers to drag, and I put DND in Notifications.

  Hi Ben Collier.

  Looks like you're some problems with your Mac, specifying the digital number for the month, instead of the names of the months themselves. Also, you have some problems with the trackpad preferences and do not disturb for notifications. I can see how you would like to get this all resolved. We'll see what we can do.

  I would like to first of all, you have set the trackpad preferences and do not disturb the notifications as you want, then start up the Mac in safe mode.

  OS X El Capitan: Notifications preferences

  OS X El Capitan: start in safe mode

  Once you're in safe mode, please try to see if the names of the months are returned and that the trackpad still works as expected. If the names of the months back, please restart the Mac and open the calendar application and then check to make sure that the problem is solved. If issues are not resolved in safe mode, please create a test user and verify. This will help us to determine if the questions are the scale of the system or a specific user.

  How to test a question in another account on your Mac.

  Thank you for using communities Support from Apple. Have a good night!

• How can I unsubscribe from a monthly automatic renewal for the Washington Post?

  I don't want to get the Washington Post more. It automatically renews each month and I pay on my Apple account. How can I stop it?

  There are instructions on this page to manage and automatic shutdown iTunes-renewal of subscriptions: view, change or cancel your subscription - Apple Support

• How to remove the period/point of the day and month in the menu bar

  Since the upgrade to Sierra I noticed that the day and month in the menu bar have now periods (diaphragm openings) after them, for example 'Sun' instead of 'Sun '. It is not possible to change this by using the language and region settings. I find them boring. Is there any other way (for example by using Terminal Server) to get rid of them?

  This is the default value for the Australia, for example. What region is selected in system preferences?

• I need my iPhone 5 to numbers automatically several times a month to keep my number as I am out of the country

  IPhone 5

  I want the phone to make a call by month automatically while I'm out of the country to keep my phone number.

  This seems unusual to me. Why and who do you call to keep your phone number? Do you take your phone with you when you travel? Just set up a reminder that you make the call. I'm not aware of any way to have the phone to make the call. Should what type of response you do when you get that call? I don't see how having the phone automatically call a number no response after that the call would end would solve anything.

• How can I activate my free Apple music subscription of 12 months on my other iDevices?

  I activated my free Apple music subscription of 12 months on my iPhone 7 but how can I do now on my iPad and Apple TV as well as Sonos. Every time after that I connect with my Apple ID and password I am asked to choose a plan which I will be charged for (eg. Each pmth $11.99). Say, for example, if I go ahead and join a plan will be the Apple system recognize I already have a free subscription and will therefore not charge me until the end of the free period?

  Hi jnees1,

  Thank you for using communities Support from Apple!

  I understand that you started a lawsuit Apple music and I would like to use it on multiple devices.  Do you mean the 3 month trial of Apple's music? Please make sure that each device you sign with the same identifier Apple you use on your iPhone.  You can find out what Apple ID, you are logged in with by going to settings > iTunes and App Store. To answer your question about the billing after the 3 month trial period, you will be automatically charged at the end of the trial.  See this link for more information on Apple's music joins:

  Join the Apple music on your iPhone, iPad, iPod touch, Mac or PC

  Take care.

• Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  I don't know if this is the problem, but it is something that must be correct establish a secure connection:

  Open Date and time preferences system, Date & time tab. Make sure that it is set to automatically set the time.

  Alternatively, make sure that your date/time is correctly set to the second.

  Another thing to try is to restart your modem and router.

• Time series: finding max and min for each month

  Hello world. I'm working on a datasheet that has collected the data points for all day for the past 15 years.

  A column stores the date and column B contains a numeric value.

  I want to do the following:

  Create a new table (call it table #2) that:

  (1) is now a time series on a monthly basis (column A contains "year month"). This is why the table contains a header and 15 * 12 = 60 rows of data

  (2) B Col contains the Max value of this month.

  (3) C Col contains the value this month min

  Table #2 should be calculated automatically because I need to find these values for several series. Any ideas?

  Here is a way that I came up with

  

  In the table above, your original data is in columns B and C.

  I've added three additional columns (A, D and E):

  D2 = Year (B2) & NUMTOBASE (MONTH (B2), 10, 2)

  It's shorthand dethrone select D2, and type (or copy and paste it here) the formula:

  = Year (B2) & NUMTOBASE (MONTH (B2), 10, 2)

  E2 = IF (D1≠D2, 0, E1 + 1).

  Select copy of D2 to E2,

  Select cells D2 at the end of column E, block

  A2 = D2 & NUMTOBASE (E2, 10, 2)

  Select A2, copy

  Select A2 at the end of the A2 column, paste

  now create a second table summary as shown:

  

  For 'Summary Table 2016:

  the first four lines are the lines of header

  There are 35 total lines

  Enter the year in cell B1

  A5 = −4 LINE)

  B5 = SIERREUR (VLOOKUP ($B$ 1 & NUMTOBASE(B$4,10,2) & NUMTOBASE($A5,10,2), data: $A:$ C, 3, 0), "")

  Select cell B5, copy

  Select cells B5 at the end of row 5, dough

  Select A5 thru M5, copy

  Select cell A5 at the end of the M column, paste

  B2 = MIN (B)

  B3 = MAX (B)

  Select the cells B2 to B2, copy

  Select the cells B2 through M3, dough

  now duplicate the table and change the year to 2015 for the next year.

  You can duplicate this table as necessary to summarize a year