tests 3 months

Similar Questions

• Extraction of data to use in SUMIFS

  A question about the SUMIFS function.

  In my formula below, the SUMIFS function shows the 1st test value stay $Année. The 2nd test is $ month of stay

  Each refers to 2 columns hidden, where we find a number representing the year and the other the month extracted a column "date."

  The couple of month/year, I want to talk about is the one in the pink column of the period case.

  

  (1) this way of doing things is quite complicated because it requires that I created first 2 columns where we find the numbers related to the year and month.

  I would prefer rather to check directly the column 'date' I'm referring to, I look for the year and then the month. Something like that...:

  

  In this photo the 'date' column is brown.

  But obviously SUMIFS has a problem with it; It is said: in the function SUMIFS, all values of type interval must be same size

  Am I missing something, or is it really impossible to use another function to extract the value to test?

  (2) because I have 2 conditions to check at the same time, is there a particular use way AND SUMIF and SUMIFS function?

  Thank you all for your help and your time.

  Lopez

  Hey Lopez,

  I guess that your translation refers to the line below in the description of SUMIFS.

  • all values of type interval must be the same size
  • All collections must be of same size.

  What this means, is that each column values of test (Brown) must have the same number of lines as the column of the sum (blue) values.

  Kind regards

  Barry

• Long-term storage of inkjet all-in-one (F4480)

  Is there a good way to prepare for storing ink jet printers long-term (> 1 year) so that the jets get clogged?

  We have a F4480 deskjet all-in-one that has not been used in several months.  As far as I know it still works fine.  It has been stored in the original box & delivery packaging for 3 months.  We hope it won't be necessary for 1-2 years.  We had 2 former HP hoof to the top after a long period without use.  I said that they should be tested every month or two.  Do you need >

  This model integrates print on ink supplies heads, so in the worst case, you'll just need to replace the cartridges.  I think after a year or two ink supplies will probably dried out or clogged.   When you restore the printer to the service, you may be able to run up to three cycles of cleaning of the Toolbox.  Is there is an impression, but it is scratched or one or more colors are missing, then soak the nozzles of the cartridges down in about 1 "of very hot water for 10 minutes can recover the cartridges.

  The best plan would be to simply use the cartridges before long-term storage and then store the low or empty cartridges in the printer.

  For best results, store the printer with cartridges installed.  Be sure to turn off the printer to its power switch and wait for the cartridges to Park properly before removing the power.  Store the printer in a place cool and away from drafts, pets and other potential hazards.  Make sure that the printer is stored standing in its normal operating position.  Store the printer upside down or sideways or the end can cause problems.

• Wired WRT610N 1Gbits fall to 100 Mbps, after awhile

  I start my XP SP2 computer and router wired port 1 (the only wired) show connected green (this average 1Gbits until they fix it) and everything seems fine. After an hour or two I have a message if poster near the time on the network disconnect and then reconnect then disconnect, etc. for abour 7 - 8 times now then it reconnect to 100Mbits (LED is now blue). It is the second time that it is happening now. My computer runs usually 24 hours a day, but I rebooted twice this week. I don't like the loss of speed because I have higher than 100 Mbps but there is a problem here and I think LinkSys should take a look. Network card is an Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller

  Well, after a HD crash I installed a fresh copy of the operating system and then entered WindowsUpdate and found that there is a newer driver for the network card.  I guess it was there before, but never really looked and now the new installation of the OS has forced me to look at all available updates.

  Since then, the light stays green on the router.  I know blue should be 1Gbits and is a flaw in the current firmware and why LinkSys is not faster to give us that a new firmware for their instruction booklet info will correspond to the reality, is a mystery.  As the firmware that they are testing for months now to solve some disconnect problems.  Never thought Cisco might be THAT slow.

  In any case, I wanted to present my conclusions and label this thread resolved so if someone has encountered the same problem they could possibly fnid a solution.

• Setup error - Dll Twain

  Hello

  I'm french and I speak very good English, but I hope to be clear for my problem.

  I have install the Remotescan V.5.494 client on a server TSE 2003 (SP2) to test a specific software.
  When I installed, a window appears with the message: "installation information - your TWAIN DLL (version 1,7,1,1) can be cause RemoteScan to not show in the menus of the application as a scanner. Please contact [email protected] and let us know if you have a problem. "
  In spite of Remotescan appears on my software and I can edit different from Twain scanners.
  I can use the scanners by remotescan customer. Everything is ok.

  No problem when I install the Remotescan server on my computers (windows XP SP2). I use different scanners (Epson & HP) but I can't scan with my software. I have a TWAIN 32.dll error message.

  On my 2003 Server TSE Remote Scan does not appear on the word. I have try it with a version 9. remotescan XX. The same problem. What can I do? Please
  Thanks for your help in advance

  I did a test 1 months ago about 2003 TSE server and with the same version of remotescan (V.5.494) and everything was allright.

  Please install the latest version of RemoteScan server which would be 9.712 or for the company, it would be 10.612. When installing, be sure to check the box to update Microsoft Office 2003 applications.
  If you need assistance please contact the support to the 406-721-0276.

  Thank you.

• CCNP security - SISAS 300-208

  p.137 book of Aaron Woland, entirely of distributed deployment

  "The maximum number of NHPS that may be associated with the PAN + combined MNT in the deployment of four nodes, is five Ssnp, which makes deployment of seven nodes."

  If my interpretation is correct, I take the configuration in Figure 7 - 4 shown on p. 136 and add three blocks more (e, g., ISE-5, 6 - ISE, ISE - 7) to respond to the above statement.  My interpretation is correct?

  Related to this: how 7-5 Figure 5 ssnp at 40?  The last sentence on p.137 "the maximum number of NHPS in this deployment also increases of 5 to a maximum of 40 Ssnp."

  What factor (s) am I missing that determines the amount of NHP in any deployment model?

  My interpretation is that each node of PAN and each node MNT can support a maximum of 5 knots PSN.

  Thank you.

  If anyone is interested, teamwork to get the material for the latest CCNP security exams, I'm available.

  KA,

  The interpretation of the addition of ISE 5, 6 and 7 for the deployment of 7 knots described is correct.

  The PSN 5 limit is when you have dual persona (PAN and MnT) nodes. Only when you have dedicated nodes of persona (PAN only on one node, NTMs on a separate node), you can move up the maximum number of PSN past 5 a maximum of 40.

  (I spent the SISAS test last month.  :))

• Issue of MAJOR brush Image in RGB mode with AI Update (with video)

  

  Illustrator PRODUCT BUG / PROBLEM: Image in the new version of illustrator brushes show a strange discoloration and pixelation unsightly around the edges that have any transparency, but ONLY in the space of RGB, CMYK color space color has not this problem. This moved NOT in 2015 from CC. I could create a brush image with transparency on the edges, and it would be PERFECT if I was using a color space RGB or CMYK.

  Below I'll detail the major problem that I discovered with brushes of image in RGB color mode in the most recent update of Adobe Illustrator. After having tested methodical, I created a video with my findings. I also wrote it below the video more in depth as well.

  PRODUCT BUG / PROBLEM: Image in the new version of illustrator brushes show a strange discoloration and pixelation unsightly around the edges that have any transparency, but ONLY in the space of RGB, CMYK color space color has not this problem. This moved NOT in 2015 from CC. I could create a brush image with transparency on the edges, and it would be PERFECT if I was using a color space RGB or CMYK.
  I create digital assets for a living and am a bestseller on creative market (https://creativemarket.com/dailydesignables ) and am VERY methodical about products, I create, so I did thorough testing to ensure that it is not a question that I have just. It's a universal issue with illustrator CC 2015 update. A few months ago I published a set of brushes for IA CC image and sold many of them, and I've tested for months before release. I discovered this problem when I was going to use in the new version of illustrator and to my surprise, the edges of the brushes where there was some transparency had terrible distortion of colors and pixelation.

  It wasn't a problem on the previous version of illustrator and I tested it on my two machines, I have a customer who bought my image brushes email me with the same problem. I created NEW brushes in my video demo above to show it is also not a problem with the implementation brushes from a previous version. I created brushes sweet image in CC2015 and CC2015.3 to show the problem is with the new update, and ONLY in the RGB color space. Because the image brushes worked perfectly in the latest version, I know it's possible. There is a problem with the RGB color space in the new version's efforts useless brushes image with transparency on the edges. I work in RGB, so it's a big deal.

  In addition, there is nothing to do with the performance of the GPU, I tried that already, turn it off, restart illustrator. Same results. At first I thought it was a rendering / perhaps CPU / memory problem which will make arrangements with a reboot, but it isn't. It is constant in my machines and my clients. In addition, if you paste the image (with transparency issues) brush in a photoshop doc, be it as a smart object or a raster object, discoloration and the pixelation also comes, is not only a problem of rendering of AI.

  I was supposed to get a call from Anu on case #0187946265 last week and never did. I got an email to say Adobe, they closed the case because they have marked as "resolved". I tweeted Adobe Illustrator and Adobe supported the problem, so I hope that someone in the bugs team will see this STAT! Thank you very much in advance!

  Jessica

  Hello world!

  Just an update that Engineering was able to reproduce the problem and are working on a fix. Although there is a workaround solution, working in CMYK mode (and then switching to RGB later) should work until the fix is released.

  Thank you all for your patience and hard work.

  -Kathleen

• Promo code for CC receives "incorrect serial number -" but is not

  What gives?  Coupon valid until 24/07/15, n ° series entered is correct for you. It is a purchase of SanDisk and offers 3 test free month of CC.  Entry page returns a response of "invalid code". Tried to change caps in the code given to lowercase letters: simply does not work.  Others have similar problems with Adobe coupons?

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

• Multi-monitor (PCoIP) and Windows 7

  Greetings,

  We try to test 2 months see 4 but one of the problems is that when trying to connect to a virtual from Windows 7 computer in mode multiscreen we get just black 2 screens and after a few seconds that it disconnects and View Client closes.

  Anyone who manages to get multi-screen working for Windows 7 clients? I tried to increase the memory to 128 MB vram.

  Multimonitor works without any problem when you connect to a Windows XP client.

  Thanks in advance,

  Bram

  I had exactly the same problem and it is resolved.  You can read the complete demo that I did here:

  http://communities.VMware.com/blogs/gunnarb/2010/01/26/PCoIP-review

  However, the quick answer is: uninstall vmware tools, uninstall agent from view of the guest operating system.  Reinstall the tools then agent.  See if you can connect to the base image (we're not done linked clones).  Also, everything I care at this point is that you get a single monitor to work.

  Once you can connect to Windows 7 with a single monitor, go into Device Manager to uninstall your graphics driver and replace this drive with the driver found SVGA C:\program files\common files\vmware\drivers do not use the pilot of MCDA.  With the SVGA driver in place, you will get multi-monitor support.  Also it will fix the annoying UAC question and issues of screen saver.

  A problem with this solution is that it is not supported and has experienced problems with BSOD, but you get a multi-monitor VM work.  Once you have all that in place, go ahead and do your linked clone stuff.

  -Gunnar

• Problem connection Folio Builder - update required

  Hello

  I had the following problem

  I am a user who has an account creative cloud currently active and functional.

  I'm working on a folio DPS for a magazine with indesign CS6 Ipad.

  I have created my new Folio and added the first 2 articles correctly.  I have problems of connection in the CONSTRUCTOR of FOLIO because when I insert my adobe account information it connects but says:
  "A software update is required to use Digital Publishing Suite. Please go to the Help menu and select updates to get the necessary software. »
  

  The fact is, in fact, I have all the updated software up to date... If I sucked through the HELP MENU as requested it tells me that no updates are available... and I have the same answer also via Adobe Application Manager.

  At the moment I have the DPS VERSION 12.4.2.20121112_m_705220 8.0.9.24

  Someone knows how can I fix the problem and log the tthrough CONSTRUCTOR?

  PS if I sign in on www.digitalpublishing.acrobat.com with the same data I have no problem at all and I can see also from the first Folio, I did to test the months there is almost...

  Please help, because only in this way, I can't make a real test and the development of the Publication

  THX

  If the updated InDesign menu does not work, you can always download the updates from adobe.com/downloads.

  Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5377

  Winner: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5376

• : 1200329 error compilation of formula: invalid Assisgnment

  Hi all
  
  I get the following error when I validate a calc script.
  
  Error: 1200329 compilation error formula for [2450]
  
  Code
  
  DIFFICULTY (some mebers)
  
  ABC of the var;
  
  Var def;
  
  "Name of the Mbr.
  
  (
  
  IF(Gradde<10)
  
  'abc' = 200 * 4;
  
  ON THE OTHER
  
  'def' = 500 * 4;
  
  
  
  
  ENDIF;
  
  
  Fix(Jan:DEC)
  
  'Name of the Mbr' = ("abc" + "def)" / 12;
  
  
  ENDFIX
  
  );
  
  ENDFIX
  
  
  Thank you and best regards,
  Konrad.

  PadmajaV,

  The problem with your approach is that:
  Fix(Jan:DEC)

  'Name of the Mbr' = ("abc" + "def)" / 12;

  ENDFIX

  Going to fail because abc and def are variables that exist as part of the calco member block.

  The OP can try:

  DIFFICULTY (some mebers)

  ABC of the var;

  Var def;

  "Name of the Mbr.

  (

  IF (Gradde<>

  'abc' = 200 * 4;

  ON THE OTHER

  'def' = 500 * 4;

  ENDIF;

  / * I suspect this test for months is not necessary, or should be better dealt with in the overall DIFFICULTY * /.
  IF (@ISMBR ("Jan": 'Dec'))
  'Name of the Mbr' = ("abc" + "def)" / 12;
  ENDIF

  )

  ENDFIX

  Again, it can be best to not put in that IF @ISMBR at all and just change the first FIX for:

  DIFFICULTY (some mebers, "Jan": 'Dec')

  Kind regards

  Cameron Lackpour

• IF... COPYDATA... CLEARDATA... ENDIF

  HI - trying to find with this calc script correctly.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  DIFFICULTY ("Amount Adeath", "S-2055", "T-22300", "VersionC", "FY10", "PLT", 'Studio Output Deal', 'AY08', 'AY09')
  
  "W1 - PR"
  (
  IF (@ismbr (JAN:MAR))
  APRIL = MAR;
  CLEARDATA MAR;
  ENDIF
  )
  ENDFIX
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  The problem is in the CLEARDATA part. I want the clear MAR script with the same parameters as in the CORRECTION and include "W1 - PR". The error message indicates missing an operator after the CLEARDATA, but I don't see what the problem is.

  I don't know what is for the @ISMBR test against months as you would a fixed assignment.

  You might want to try:
  Fix ("W1 - PR") / * Yes, a FIX on what I think is a dense - same number of crosses of the db, so no worries * /.
  "Mar" = "February";
  ENDFIX

  If it works, then put in the "Feb" = #Missing; line after the transfer. I find running code increments and based on successful measures to be my best approach to get the code to work.

  Kind regards

  Cameron Lackpour

  P. S.
  Another alternative could be:
  DATACOPY "Feb" to "Mar";
  CLEARDATA "February";

  But I would probably go for the assignment by a sign '=' first because it is easier to read, and performance differences are going to be so small for what is impossible to measure.

• Monthly hardware diagnostic test

  Top of A6510t HP desktop computer.

  Question of hardware diagnostic tools

  My monthly hardware diagnostic test ran and it showed:

  in the category of instruments 'storage '.

  storage-"smart auto court" has failed. It had on it. HD521-2W

  She supposed to check help and support center but that was no help to me at all.

  Can someone give me an idea what I'm up against? I don't know even where to start.  If I was a technician, it would be probably better.

  Thank you in advance.

  Your questions are valid and thoughtful.

  If the plan is to backup your important files, etc. on an external hard drive and nothing to do with the old PC, so you don't need a 3.5 "SATA hard drive to replace the other.

  Your question: "so I guess I'm asking if record these things on the external hard drive will allow me to have these things available to put on a new computer should I have to? Yes.  You will not need the OS or recovery disk\usb license information because your new PC media comes with a.

  It is not a simple matter of connecting the disk external usb passport to a usb port on the new PC and using Windows Explorer to search for and copy them to your new PC.

• Diagnosis of the monthly material hangs on the checkerboard Test

  My HP P62101 desktop computer about 3 year, suddenly began to have questions during regular monthly Diagnostics. I have the latest version of the support Wizard - 7.0.39.15 - and have been unable to find any useful info on this troubleshooting. It happened twice today - I cancelled the first time, turned off all applications (it had started automatically while I was and had left a few living things) and tried again, but once more he got checkerboard Test and was suddenly no longer responds. The only reference I found was from 2010, and given suggestion has been updated of the wizard for help. Given that I later what should I do now before I panic?

  Thank you!

  Steps to change the HP Support Assistant Disk Defragmenter schedule:

  1. open HP Support Assistant > click on storage, backup and recovery

  2. click on Disk Defragmenter

  

  

  3. click on the button Configure schedule+

  

  4. to disable programmed defragments, uncheck the Run on a square on the calendar.

  To change the calendar, select the options you want in the drop-down menus. The computer should be and not in sleep or Hibernate mode for defragmentation to run.

  

  I would like to know if these steps help or if you have any questions!

• Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "