More high version of firmware for the RV042
Hello
I would ask if this is possible the latest version for this RV042 to have. Under system information, it shows
Firmware version: 1.3.9 (April 24, 2007 13:03:25) CPU: Intel IXP425 - 266 DRAM: 32 M Flash: 8 M
Cisco has later this last version " RV042 RV082, RV016 firmware 4.2.1.02 - tm (V3 hardware required). " How can I tell if the RV042 is a v3 hardware?
Thank you
1.3.13.02 - TM is the last on V1.x RV042 brand hardware, what is Linksys.
RV042 V3 material can be identified on the product label at the bottom of the unit, where VID PID should show RV042 V03.
V3 material is marked as Cisco Small Business.
Tags: Cisco Support
Similar Questions
-
What is the latest firmware for the A65 Alpha as of February 17, 2013
From this date, Version 1.07 is the last update of the firmware for the camera I AM-A65V. It can be downloaded from the Sony eSupport at http://esupport.sony.com/LA/p/model-home.pl?mdl=SLTA65Vsite.
If my post answered your question, please mark it as an "accepted Solution". This will allow users to more quickly find verified solutions.
-
Updates firmware for the isa550w
y at - he's going to be more updates of firmware for the isa550w or a cisco decide to stop making the deadline of November 14, 2014? I know that this product is reached it's end of life cycle soon not if cisco decides to make the updates of firmware for this product earlier than November, it would be good to know
link to your solution two to the following: -.
http://www.Cisco.com/c/en/us/products/collateral/security/small-business...
-
Is there an option upgrade version of PC for the Mac version Acrobat v10?
Is there an option upgrade version of PC for the Mac version Acrobat v10?
If you wish, can upgrade to Acrobat Pro DC for Mac. Please find more info here: Plans and prices | Adobe Acrobat DC
Thank you
Abhishek
-
Cannot find the latest firmware for the Toshiba 40TL838G
Hello
I am trying to download the latest firmware for the 40TL838G model, but I'm not.
Where can I find it?
Thank you.
The same has been asked in this thread
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=73914We can receive the update only via a network update
In which case you will not receive updates via the network, your firmware is up to date. -
Need new firmware for the drive (Mat * un UJDA750)
I have a Satellite M30 with a carpet * a player combined UJDA750. Anyone know where I could get a new firmware for the drive?
THX.
Hello
I put t know why you need a firmware for your combo drive.
As far as I know the carpet * a combo UJDA750 driver works with the Windows driver very well.Good bye
-
When comes out the next firmware for the "rocket"?
When comes out the next firmware for the "rocket"?
Sometimes in the coming months
-
Any trail version is there for the DPS App generator... ?
Any trail version is there for the DPS App generator... ?
Hi Pradeep,
You can register a test of this new product of Digital Publishing Solution at http://www.adobe.com/go/dps , which will allow the use of the web version of App Builder for 30 days. There is no trial available for the previous product in Digital Publishing Suite.
Neil
-
Where can I get more old firmware for the ea8500?
I can't wait you can download older firmware from the support page for the router. The only firmware that there are listed is the last but my router works like * beep * with her there.
I had to restore to the previous firmware, but I would also like the flash of the other partition.
I don't want this new firmware on my router.
Is there at - it an older firmware repo secret or someone can give me it?
This is where it should be on the site Web of Linksys. Just replace the version in the last name of file with the version you're looking for.
http://cache-www.Belkin.com/support/DL/FW_EA8500_1.1.4.168206_prod.img
-
updated firmware for the clip and clip +.
Hello
I have an old Clip 4 GB firmware v 01.01.29A and a Clip + 8 GB firmware v 01.02.15A. I see that these are outdated versions and newer versions are available. I've never updated the firmware, so I was reading the messages to see how. Here's my question; I read that to remove FM Radio you should 'drop' the 'A' in the update. I see that the updates do not have the letter 'A' affixed. This doesn't mean no FM Radio more if I update the firmware for both of the clips? I don't want to lose the radio.
Thanks in advance for any help
I wouldn't bother with updating the Clip +. There is very little has changed since the version.15. It's the one I always use on mine.
No, you won't lose the FM radio by updating the firmware. You must have read some old posts.
-
Re: Satellite Pro A300D - firmware for the DVD player?
Hello
I recently got a nice new Satellite Pro A300D of my work and was just my typical thing to go through the update of their efforts. However, when you try to update the firmware of the DVD drive for my particular model (PSAK9E-00C003EN), I realized that the firmware he suggested was wrong. After watching on my pc, I discovered that my drive is Pioneer DVD - RW DVRTD08A (1.50), but I can't find information anywhere on the net about the updates of the firmware (or the existence of this drive at all!). Could someone point me in the direction of some information and firmware more recent if it exists?
Thanks for any info that someone has!
Willybob
Satellite Pro A300D was equipped of various CD/DVD players.
On the Toshiba driver page, you can find an update of the firmware that came out for a CD/DVD drive that was not installed in your laptop and so you can not install this update.If you are unable to find an update of the firmware of your CD/DVD drive, then an update doesn't exist and is not necessary!
-
Restriction of firmware for the HX Series
Hello
HX Series release notes describe the latest version of the firmware shipping below.
https://download.Lenovo.com/servers_pdf/lenovo_converged_hx_series_release_notes.PDF
Available hardware implement uEFI 1.1 (TCE106KUS) and 1.72 IMM2 (TCOO10H).
Can update us the firmware to the latest version? or do we have no restrictions to HX Series? (lik stay level firmware to AVS/Foundation combination)?
May 2016, uEFI last 2.01 (TCE122W) and 2.50 IMM2 (TCOO16P) are released.
Release notes, "you must pass the Nutanix OUR version 4.5.2.3 or later in order to enjoy some patches critics." are described. If we ugrade latest uEFI/IMM2, do we need to update OUR Nutanix first, then updated the firmware?
Because the previous note of support (to Fib 2016) had a similar description, but OUR Nutanix version isn't 4.5.2.3 4.5.2. So I want to know any restrictions (or relationship) for the system and update of uEFI/IMM2 firmware.
Thank you.
Hi, Mike.
Thank you youre replay and ok I understand.
We should update OUR 4.5.2 or later to the beginning and after that, we are able to update version uEFI/IMM2 version shipping factory at latest. There is no dependency on a specific version of OUR.
-
Y at - he liked an update firmware for the sansa clip
If I use the sansa updater it detects it as a normal element and gives me a firmware to install, one that ends in 32 I think, but if I install what I think ill ruin the clip, so I ask if a firmware update for the clip more were released, I got V01.01.05A firmware now
No update firmware at the moment; you have the most recent. If/when an update of the issues, it is likely is displayed as a sticky thread at the top of this forum.
-
Unable to update firmware for the PERC 5 controller / i on PE1950
We have 6 PE1950 server with SAS PERC 5 / i integrated RAID controllers. Dell OpenManage complains about being obsolete PERC firmware. 2 servers I currently have running, firmware 5.2.1 - 0062 and 5.1.1 - 0040. I downloaded the latest version of 5.2.2 - 0072. I tried the update by the Windows package and who did not, and he complain about the OS being too recent. A server is Windows Server 2008 R2 and the other Windows Server R2 2012. So, I created a BACK USB key with Dell hard drive files and run update.bat. Who failed on both servers with the following errors:
Firmware doesn't have flash. Stop!
Failed to update Firmware for controller 0
The process of updating of the firmware of the controller does not have!
Both servers had the exact same mistakes as described above. Ideas on how I can get the firmware update successfully? I checked the package I downloaded is for the PERC 5 / I integrated.
It's here (if that will allow me to post a link):
www.dell.com/.../DriversDetails
Hello
Try this updated version and see if it works. He said that it was for the 1950s.
-
Firmware for the F348XP - N77 - 23 Nexus module problems
H,
I hope you had great Christmas time! I am currently working on the new Nexus lab, and I have a challenge.
I try to get 1/10 Gbit / s Ethernet Module running. Do you know where to find firmware for this module and how to set the variable initialization for her? What I get so far:
introduce the module:
Status of Module Type mod Ports model
--- ----- ----------------------------------- ------------------ ----------
1 48 1/10 Gbit / s Ethernet Module N77 - F348XP - 23 ok
2 48 1/10 Gbit / s Ethernet Module N77 - F348XP - 23 powered-dn! This one, with that I'll have the problem
3 0 active supervisor Module-2 N77-SUP2E *.
4 0 supervisor Module-2 N77-SUP2E ha-standbyWhen I try to turn it on by entering
(config) # No module poweroff 2
I'm more about newspapers:
2015 Dec 16 00:38:23 % xxx platform-2-MOD_DETECT: Module detected 2 (serial number JAE19290A6J) Type of Module-1/10 Gbps Ethernet Module model N77-F348XP-23
2015 Dec 16 00:38:23 % xxx platform-2-MOD_PWRUP: Module 2 under voltage (serial number JAE19290A6J)
2015 Dec 16 00:38:23 % xxx platform - 5 - module MOD_STATUS: Module 2 - current situation is MOD_STATUS_POWERED_UP
2015 Dec 16 00:40:02 xxx % BIOS_DAEMON-SLOT2-5-BIOS_DAEMON_LC_PRI_BOOT: System started from the main BIOS Flash
2015 Dec 16 00:40:05 xxx % FW_APP-SLOT2-2-FIRMWARE_IMAGE_LOAD_ERROR: error extraction and loading Firmware: firmware Flash and software images are bad
2015 Dec 16 00:40:06 xxx % MODULE-2-MOD_FAIL: initialization of the module 2 (serial number: JAE19290A6J) failed
2015 Dec 16 00:40:06 xxx last message repeated 1 time
2015 Dec 16 00:40:06 xxx % PLATFORM-2-MOD_PWRDN: Module 2 power off (serial number JAE19290A6J)
2015 Dec 16 00:40:06 xxx % PLATFORM-5-module MOD_STATUS: Module 2 - current situation is MOD_STATUS_CONFIGPOWERED_DOWN
2015 Dec 16 00:40:06 xxx % PLATFORM-5-module MOD_STATUS: Module 2 - current situation is MOD_STATUS_POWERED_DOWNI take the problem is with the firmware, but I can't find the path to it. It there is no defined variable initialization is module 1, or 2, but module 1 started without problem.
XXX # display the start module 1
No set variable initialization module
XXX # display the start module 2
No set variable initialization moduleI can see the bin files under
XXX # cd bootflash://module-4/
bootflash://module-4/20150808_221923_poap_7580_init.log bootflash://module-4/vdc_3
bootflash://module-4/20151211_010151_poap_8037_init.log bootflash://module-4/vdc_4
bootflash://module-4/20151211_015441_poap_7723_init.log bootflash://module-4/vdc_5
bootflash://module-4/lost+found bootflash://module-4/vdc_6
bootflash://module-4/N7700-S2-dk9.6.2.12.bin bootflash://module-4/vdc_7
bootflash://module-4/N7700-S2-kickstart.6.2.12.bin bootflash://module-4/vdc_8
bootflash://module-4/scripts bootflash://module-4/vdc_9
bootflash://module-4/vdc_2but I'm not able to assign variable initialization module, I see 1 - sup and sup - 2 only
XXX (config) # boot system bootflash://module-4/n7700-s2-dk9.6.2.12.bin?
SUP-1 input sup-1 to set up the 1st sup
SUP-2 input sup-2 to set up the 2nd supI hope that you would be able to help!
Happ new year as well! :)
Hello
Do you have these linecards at the same time? I see that module 1 is the same model and do not have any problems. Did you open a SR of TAC for the same thing? I saw some similar cases where these messages could be the result of a faulty hardware, but you can open a folder of TAC to continue the investigation.
HTH,
Wes
Maybe you are looking for
-
Whenever I open Firefox, I get the following error:Error: TypeError: netscape.security.PrivilegeManager is not defined I never had this before. Where did it come from? What it means? How can I get rid of him?I use Firefox 24.0 on a desktop Lenovo Vis
-
FF doesn't let me stick my Hotmail sign-in password
It is only with Hotmail. IE has no problem. When I right click on the password box, paste the option is dimmed.
-
Model number strange on the back of my new fuse
Just got a new fuse. 8 GB. Yippie. Being new and 8 GB you expect a silver model that is but the model on the confuzes me back sticker. B I09030BLAK-8 GB BLAK? I thought that the only black 8GBs were refurb. Maybe it's just a random series of lette
-
Can I re-use a retail version of Windows 7
Hello Can I use a version of Windows 7 on another machine when I replaced on my main PC with a new version of Windows 8 retail? Thank you very much
-
Download free blu ray player for windows 8
I've recently updated to Windows 8 and when I tried to install the PowerDVD 10 supplied with my Bluray player it installed fine but when I tried to play a Bluray it says something about the integrity of the disk or software or something. It is so why