Motherboard Asus P5LP--a new VGA MSI installation.

Similar Questions

• Difficult question - upgrade of the motherboard ASUS P5LP processors - THE

  I have a HP desktop with the motherboard ASUS P5LP - THE. I would like to ask a series of Core 2 Duo E7500 processor in this computer, however the features HP say max supported is a 6xxx series. The E7500 will work with this motherboard? E6xxx processors are becoming hard to find. Thank you!

  Hi, based on yourproduct m7480n pag, actually have the motherboard ofEmer .  :

  Just to be sure, you can have a quick came on the back of the machine.  Emery has a great to come on back pink parallel port, whileAli Seid has a blue VGA port instead

  There is aBIOS updateavailable for the m7480n, if you still do not have xp, but he said nothing about having updated the code micro for newer processors.  Looks like are your options of processor for the Emery

  • Pentium D 800 series basis until 3.2 GH Smithfield

• Motherboard Asus P5LP - limestone with Core 2 Duo... is it possible?

  Hello

  So Ive wanted to upgrade my CPU for a while now for my computer HP m7167c with the motherboard Asus P5LP - limestone. On the product information HP on the motherboard, I see Upgrading CPU best I can get is Pentium D or Pentium 4. Given that the motherboard is the LGA 775 socket type, would fit in a Core 2 Duo E7500 Wolfdale. I was hoping that there would be in any way you can do this work., and I have concluded that, although this might be dangerous, it coul be done by flashing the BIOS using windows XP. If there is someone who knows how to do this could you please help me?

  Hello:

  It would be 100% chance of not working to install a C2D.

  At least with the shot in the dark, you can have a chance on the outside to hit something.

  Installation of a Pentium D 945 with the last update of the BIOS provides a better result than shooting in the dark.

  Maxing out the memory is a good thing, or add at least 2 x 1 GB sticks to the two empty slots. If you have not done this, I would do it before the upgrade of the processor.

  I looked at the specs of product for your PC, and I see no power supply specifications. I need to know what the power of the P/S before recommending a video card with HDMI output for your machine.

  Paul

• Upgrading the BIOS. Mobo ASUS P5LP - THE. BIOS of PHX. Tech. of ver.3.16. Pavilion a1620n. Win 7OS.

  I have a Hp Pavilion a1620n with a motherboard ASUS P5LP - THE using Phoenix Technologies Bios VER.3.16 and running Windows 7. I want to upgrade the processor and said that I have to upgrade the Bios before upgrading the processor. I have been researching but can't find any info on how to do it for this particular machine. There is no on-board Bios Flash program and I can't seem to find any information. Any ideas?

  AZ_scuba_dude, welcome to the forum.

  There is no update software/BIOS for Win7 for the computer.  It is unlikely that there will be a developed.  However, there is a BIOS update for XP.  You will need to do a system restore to the original configuration that includes XP.  Once this operation is complete, you can update the BIOS to version: 3.19.  You can do the update using the executable file (sp35100.exe). Although she did not mention anything about what makes the upgrade of the processor.  Here are the Specifications of the motherboard of the computer.  In the processor upgrade information section, it lists the updates that supports HP.

  Please let us know if this solved your problem or not.

• HP Pavilion P6724IT: Hp Pavilion P6724IT stuck to the HP splash screen after the installation of the new VGA

  Hello people.

  I buyed a new VGA, a Gigabyte GT740 2 GB DDR5, before I had an Asus GT630 2 GB of DDR3 memory and had no problem with it.

  After you mount the new VGA, I noticed that the computer gets stuck to the initial start with the HP logo screen.

  Can't even get to the BIOS, but if I remove the card and use the igpu it is all ok.

  I tried to update the bios with the latest version on the HP website (v.7.15) and nothing.

  Tried to install it with Windows 8.1 and windows 7, nothing.

  I tried all the things I found on the net of people with the same number, nothing new.

  If I'm pretty quick and I press certain keys we Gets the black screen and stuck in any case, do a few beeps and then go to a kind of sleep and if I keep pressing a key, it makes little noise Cracklin'.

  In fact I can't afford a new motherboard so I wanted to know if I can find a solution to the problem, because it's really frustrating and I spent much time trying to understand with your help.

  Sorry for my bad English!

  Hope someone can help me

  See you soon

  @wb2001  Thank you for asking me to review this theread.

  ZeroProsekt,

  You must answer such questions as published by the wb2001.  If you do not know the answers, then contact the manufacturer of the graphics card and ask for more information on the graphics card of specific model you are trying to use.

• problem with hd audio, windows xp new motherboard asus with realtek alc1200 audio

  Hi, I have a new motherboard asus P6T, hd audio realtek onboard, all loaded fine, but I have no sound in windows. sound plays very well in the realtek Control Panel, but it won't play in windows. Realtek is set as the default audio playback, but in the main volume all the outputs for sound hd are disabled. I have installed the latest drivers, did not help. Don't know what to do from here, seems to be a windows problem more realtek. any help is appreciated.  Thanks Bill

  Check out all the sound options (usually accessed via the sound in the taskbar icon)

• I tried to update the drivers that I used my motherboard Asus drive and some how it changes some firmware on the operating system

  OK, my problem is that I don't have a PC before generation. It is a custom build. A week ago while I was trying to update the drivers, I used my motherboard Asus drive and some how it changes some firmware on the operating system. now that is fixed. and now, just yesterday I downloaded the Windows Essentrils to win mail. This morning I woke up and started my PC and I get a red screen saying that some unauthorized to the firmware change has been done to solve this problem, I think I have to erase my hard drive and re to stall my win 7. and how do I do with the disc because it is a refurbished lic. Windows Essentials

  Yes

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Windows msi installer/Notepad

  tried to respond to the thread, but could not, so, here goes again, Notepad will open with 'install windows msi', as this is a large file, it slows down your computer considerably, making it unusable for centuries while Notepad opens 'install', most often appears when I have access to the internet, there is no error message at all and "action center" records only the fact that I tried to close the notebook and it then "stopped working". , that I sent to microsoft, my computer is updated daily via windows update, run the home edition of windows 7, 64-bit, 8 meg ram, dual processor 3.2gig. motherboard Asus, needed help, the problem is its reappearance ugly, even I typed this question makes me crazy, please help?

  Hi again,

  have applied all your corrections and always without success. came to the conclusion that its my GSM connection that is causing the problem, use a vodafone v858 to connect, it comes with installation disc, takes over and think that this is the problem, can't seem to find a solution.

• ESXi 4 on an ASUS P5N - D numbers pre/post installation

  Hello community.

  I have weird questions som pre and Post install on a motherboard Asus P5N - D and ESXi 4U1

  Basic specifications:

  Chips inter Dual Core E5300, 4 GB of RAM and the 4 500 GB drives (running on the SATA Configuration in a RAID 5 on board giving 1.36 TB of space)

  In any case, on the baord BIOS indicates that the hard drive is a RAID 5 1.36 TB hard drive and the RAID report at startup shows as a table in good health.  However when I boot from the disk 4 of ESXi to install, when choosing the installation path, I see all 4 players for the RAID array each as opposed to a singular disc.

  Everyone fell on this? I missed a command at the beginning that I should put in manually?

  Also.  To try to solve, I then used a 1 GB USB key and installed ESXi on it.  Works fine and starts the machine, but when I go in the VSphere client, under the Summary tab for my box of ESXi, I see Datastore2 and the Datastore1 listed and being 465,50 and 461.50 sizes respectively.  It shows all 4 disks, but worse still, he is not showing them as a singular drive in an array.

  Everyone does this experience with this motherboard, or something similar?

  all necessary information or assistance would be greatly appreciated.

  ESXi does not support this type of integrated RAID controller (often called fakeraid). The best you will get is individual disks. You can view the hardware compatibility list for a supported hardware raid controller.

• Motherboard Asus IPIBL-LB does support virtualization?

  The motherboard that comes with the HP Pavilion a6642p desktop PC is the Asus IPIBL-LB.  Does this motherboard support virtualization?  If so, is there a update BIOS virtualization allows.  I'm trying to run a Linux VM using Oracle Virtual Box and I get the following error message.

  VT - x not activated or not at MSR

  I upgraded the CPU in a Coure Intel 2 Quad Q6600, but this problem with the Intel Pentium Dual Core, provided with the system.  The Pentium does VTx ability but the Q6600 contribution.

  Please notify.

  Thank you.

  Please see this document from HP called 'BIOS for motherboard Asus IPIBL - LB Benicia settings'. Scroll down to the section titled "The Power menu settings" for the location of this option in the BIOS. To enable in BIOS, select the "Power" tab and change "Virtualization technology" from "Disabled" to "enabled."

  Frank

• I want to move my hard drive from a computer with a motherboard dead to a newer machine. The activation process for Windows XP SP3 failed.

  I want to move my hard drive from a computer with a motherboard dead to a newer machine.  The activation process failed.  How can I get the operating system XP Professional sp3 reactive?  I have the code original and other info.

  original title: Moving the death machine drive

  Hello CarrolScott,

  The activation problem arose because the hardware on your current computer does not match that of the hardware on the machine whose mother is dead.

  The best option for the reactivation is to use the telephone line. This, unfortunately, is automated and may refuse to turn on your system; However, don't despair just rest on the line after the automated atcivation crossed its procedure and you will be transferred to a real person. Tell this person you've done, and it should be able to help activate.

  See this link from my Web site: http://vistasupport.mvps.org/product_key_already_in_use.htm

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• AMRT.msi installation package

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:AMRT.msi installation package. went to install the upgrade for the security of ca and some how it lost in the process and did a restore and still can not find this file.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://CA.intelliresponse.com/ISS/index.jsp?RequestType=NormalRequest&interfaceID=10&source=4&ID=1614&question=what+is+AMRT.msi

• MSI installer: recorded class is no problem

  Hi all

  I made an Installer MSI by using Visual Studio 2010, I used following properties for this installer to act as administrative rights. The main purpose of the definition of the following properties is to install the MSI installer without asking for credentials.

  ALLUSERS = 2
  MSIINSTALLPERUSER = 1

  After you set these properties for the MSI installer, its functioning and installation very well on all other operating systems except Microsoft Windows7 professional.
  On Windows 7 and 8, his work very well only problem in the case of Windows7 professional [I tested for 32 bit for now]

  I get an error message

  Unregistered class [HRESULT:0 Exception x 80040154 (REGDB _E_CLASSNOTREG)]

  [Class unregistered, HRESULT: 0 x 80040154]

  Please help me to solve this error.

  Thanks in advance.

  Hi Ajay,

  Thanks for posting your query in Microsoft Community.

  When you face a problem with Visual Studio 2010, I suggest you post your query in the MSDN forums for assistance.

  Please find the link below:

  https://social.msdn.Microsoft.com/forums/en-us/home

  Let us know if you need help more Windows 7.

• Help PCI driver for a motherboard asus

  Windows 7 can not find the driver for my pci Simple Communications Controller for my ASUS P8z77-lk

  I was able to get it is from the downloads on the Web site for this motherboard asus in the commercial section

• I've updated the motherboard (Asus) and now Nvidia card beats nice work my PC do not play the .mp4 files

  I've updated the motherboard (Asus) and now Nvidia card beats nice work my PC do not play the .mp4 (with VLC, Quick time player ect..) files

  And what about the Windows Media Player12?

  You must uninstall and reinstall VLC Media Player, it seems codecs has been corrupted. You can also download and install ffdshow