Windows msi installer/Notepad

Similar Questions

• Impossible to use the MSI installer in Win7

  I tried to install AVG Antivirus, but it will not be installed. The AVG technical support

  has made all sorts of audit and said that he cannot help because the Windows Installer service is "damaged or defective.

  Here's a screenshot of the error MSI:

  MSI error screenshot

  Much to my surprise, AVG has said that Microsoft will help me with this problem. Is this true? I hope so!

  Thank you

  Hi again Andre,

  After posting here, I did some research, hoping to find a way to fix

  the installer of Windows 7. Apparently I'm far from the first person with this problem!

  I also see that you others gave the same advice that you gave me
  (http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-installer-50-when-will-it-be-ready-to/e696e036-dd43-4f8b-8b0e-5f34123f27d2?auth=1) but it did not help them any more than it has helped me (and answered quite nasty too).

  I have noticed that in a different thread
  https://social.msdn.Microsoft.com/forums/Windows/en-us/c3f91eac-D880-41FA-b86d-5568d4ead02f/how-to-download-Windows-Installer-50-?Forum=winformssetup
  a person named Helen Zhou said:
  Windows Installer 5.0 was released with Windows Server 2008 R2 and Windows 7. 5 Windows Setup program is not available in standalone version and you can download the Windows 7 SDK Web installation program or file ISO of Windows 7 SDK. The advantage of the web installer is that you can choose to install any subset of the SDK. It should, however, connect you to the internet

  This answer seems to be the only one who never really resolved to someone

  installation problem. As has been published in this thread:

  Thanks to this comment and the link given by Helen Zhou (see below), my computer has been fixed.

  Windows 8.1 - windows install 5.0 broke and arrested installation programs packed for her. The only solution was similar to a relocation. Running SDK Web fixed (loading install 4.5?) and I am very grateful!

  Do you have comments on this proposal for a solution? What risks it implies?

  Thank you!

• MSI installer: recorded class is no problem

  Hi all

  I made an Installer MSI by using Visual Studio 2010, I used following properties for this installer to act as administrative rights. The main purpose of the definition of the following properties is to install the MSI installer without asking for credentials.

  ALLUSERS = 2
  MSIINSTALLPERUSER = 1

  After you set these properties for the MSI installer, its functioning and installation very well on all other operating systems except Microsoft Windows7 professional.
  On Windows 7 and 8, his work very well only problem in the case of Windows7 professional [I tested for 32 bit for now]

  I get an error message

  Unregistered class [HRESULT:0 Exception x 80040154 (REGDB _E_CLASSNOTREG)]

  [Class unregistered, HRESULT: 0 x 80040154]

  Please help me to solve this error.

  Thanks in advance.

  Hi Ajay,

  Thanks for posting your query in Microsoft Community.

  When you face a problem with Visual Studio 2010, I suggest you post your query in the MSDN forums for assistance.

  Please find the link below:

  https://social.msdn.Microsoft.com/forums/en-us/home

  Let us know if you need help more Windows 7.

• How to change the setting of compatibility of the MSI installer?

  I am trying to install an MSI file for an application called "Encryption Plus" from the edge of the Guardian.

  When I click with the right button on the MSI file and choose compatibility, I'm presented with the checkbox to select "run this program in compatibility mode for:"

  But the drop down menu contains NO items. It is an empty list. When I click on it, it does not show Windows Vista, Windows XP SP3, etc., etc., as it should.

  If I try to do it on any other exe installation, it well. This happens only with the .msi installation files.

  21/06/2010 13:09, Jeff_PAML wrote:

  I am trying to install an MSI file for an application called "Encryption Plus" from the edge of the Guardian.

  When I click with the right button on the MSI file and choose compatibility, I'm presented with the checkbox to select "run this program in compatibility mode for:"

  But the drop down menu contains NO items. It is an empty list. When I click on it, it does not show Windows Vista, Windows XP SP3, etc., etc., as it should.

  If I try to do it on any other exe installation, it well. This happens only with the .msi installation files.

  Have you tried to install the file without changing the compatibility first?  If this isn't the case, you may be able to install and then change real compatibility on the exe file of the application (and Windows 7 can do for you automatically if it detects problems with the application).

  Hope this helps and have a nice day :)
  Patrick.

  Smile... Someone out there cares deeply about you.
  Have you updated today?
  http://update.Microsoft.com

  Smile... Someone out there cares deeply about you.

• Addresses of different download Flash Player 18 for Windows (.msi, .exe) - what are the differences?

  Hello

  Normal way to download flash player is to go to

  http://get.Adobe.com/PL/flashplayer/otherversions/

  and chose its own version.

  For Windows 7/Vista/XP, there are three different files for the moment:

  flashplayer18pp_hd_install.exe - Opera and chrome (PPAPI)

  flashplayer18ax_hd_install.exe - IE (ActiveX)

  flashplayer18_hd_install.exe - Firefox (NPAPI)

  All have the same size (1 125 056), but are slightly different content.

  There is another location:

  http://fpdownload.Macromedia.com/get/flashplayer/current/licensing/win/install_flash_playe r_18_plugin.msi

  Size much more: 19 588 096

  It seems to work with Firefox and other browsers too.

  My question: is the file type of 'global'.msi file - and design to work with all browsers?

  That contains the .msi? (I guess that all the above plugins and something more?)
  (Actually, the Interior is essentially a .exe file: InstallPlugin_18_0_0_194.exe, size 18 411 184)

  I would like to learn more about this file, how is it different from plugins on get.adobe.com and where is the information on the net (except the google link).

  
  Thank you!

  Hi MattD.spoon.net,

  For Windows 7/Vista/XP, there are three different files for the moment:

  flashplayer18pp_hd_install.exe - Opera and chrome (PPAPI)

  flashplayer18ax_hd_install.exe - IE (ActiveX)

  flashplayer18_hd_install.exe - Firefox (NPAPI)

  These are installers of hold that to download and install Flash Player silently in the background.  The hotfix installation program does not download the MSI installer in your next comment.

  There is another location:

  http://fpdownload.Macromedia.com/get/flashplayer/current/licensing/win/install_flash_playe r_18_plugin.msi

  Size much more: 19 588 096

  It seems to work with Firefox and other browsers too.

  My question: is the file type of 'global'.msi file - and design to work with all browsers?

  That contains the .msi? (I guess that all the above plugins and something more?)

  No, it will not work with all browsers.  The NPAPI plugin will work with NPAPI (for example Firefox) browsers, it will not work with IE (which uses the ActiveX control) or PPAPI browsers.

  Installer MSI contain additional information that is used by software such as SCCM (System Center Configuration Management Microsoft) management tools.  MSI installers are mainly used by business customers to deploy Flash Player within their organization (the page where you found the link, Adobe Flash Player Distribution, contains information on the Flash Player for the distribution of license).

  HTH.

  --

  Maria

• Flash v11.9.900.117 - MSI installs a version of the "wrong"!

  I downloaded the latest version of Flash Player Adobe Flash Player Distribution page 11.9.900.117. However, when you install the. Installer MSI, the resulting version listed in the installed Windows programs is v11.8.800.168 for browser Plugin and v11.8.200.175 for Internet Explorer. I doubt that Adobe are aware they have a problem on their download site with the offline. Flash Player MSI installation file.

  MSI installers in the page of distribution are version 11.9.900.117.

  What is the date of the digital signature of the installation files?  They should be September 27, even as the programs EXE installation.

  If your MSI have a different date, most likely, you have downloaded an old copy cached somewhere on your company servers.

• Windows 7 installs using Bootcamp in the Sierra of the BONE

  Windows 7 installs using Bootcamp in the Sierra of the OS?

  The system requirements for installing Windows 7 is provided here: install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support

• Problems with the windows 10 installation partitions

  So I try to install windows 10 via bootcamp on my macbook pro 2012.

  However, I still have problems when I get to the screen of partition on windows 10 installation.

  So I opened the USB BOOT EFI and install from there.

  I enter my product key, accept the license, and I'm greeted by the partitioning. I select the bootcamp partition, but it will not format, gives me an error message, or it will allow me to format, but no real format. If I try to delete the partition I can't create a new one, because it gives me an error message. If I try to solve this problem by making the partition EXFAT / FAT always displays the problem. If I format it under OS X EXTENDED it allows me to move forward, but after installation, it simply gives me the blue screen of death trying to boot from the BOOT EFI of SSD.

  No idea how to solve this problem, I am getting very frustrated and frankly upset against apple to give instructions so little.

  Thank you.

  Is there a particular reason to interrupt the normal process flow using the Alt/Option key? Is your USB, USB2 flash drive Installer?

• Satellite M30X windows 2000 installation problem

  I noticed ribooth has also posted a message with the same problem... but I haven't seen a real answer. The problem: if I try to install Windows 2000 Professional (including SP2) on my satellite M30X-130. The windows 2000 Setup program crashes with a "page in a no fault paged area" in acpi.sys just at the moment where the status in the status bar has been changed from windows 2000. If I press F7 during startup, acpi support is disabled and no page error occurs but the windows 2000 installation hangs on "the first screen" where you should be able to start, stop and? installation. There is no additional hardware installed and I'm unable to partition and format the HD with W2k. If I do it with win98 and create a FAT32 partition and try to install w2k on it I get the same ' page in a no fault paged area "acpi.sys error. Any suggestions to fix this?

  Hello
  Make sure that the system BIOS and other hardware is compatible with Windows 2000.
  This article may also help.

  HOW to: Specify a specific HAL or a third party during the installation of Windows
  http://support.Microsoft.com/?ID=216251

  Good bye

• Bootcamp does not recognize the Windows 7 installation DVD

  Hi guys,.

  I've never had a problem installing Windows 7 via bootcamp on my Mac, but it seems an impossible feat, right now! :))

  I have a Windows 7 bootable *.iso, but since I'm on 2010 Macbook Pro, I have to burn it to a DVD and install from there (I can't find the disk of valuable facilities).

  It is, every time that I burn it, it does not get recognized as a bootable DVD with bootcamp and not appear as a boot disk in the selection screen, you need to keep alt right after the startup chime.

  I tried at different speeds (2 x, 4 x, 8 x). I tried to convert the image using disk utility and selection of DVD/CD master and burning at different speeds.

  I'm in two DVD and I don't know what to do :) I've got El Capitan installed (so less disk utility options).

  Please help! :))

  Martin

  This latest DVD Virgin and it worked! BUT dig this error I had!

  Boot Camp only supports 64-bit Windows 8 installation. Please use a Flash DRIVE or a DVD that contains 64-bit Windows 8.

  WHAT? !!! Even though it says to install Windows 7 or a later version?

  I want to punch someone who works for Apple now!

• Satellite L300 - perform a repair of Windows Vista installation

  Hello
  I have a Satellite L300. I have NO dvd of windows vista, the seller told me that the dvd of windows found in the pc.

  Now I have to solve a problem of windows update (80073712 - kb 971644) and in this link http://support.microsoft.com/kb/957310/en-us I do not know how to perform the steps in method 3, because I don't have a vista dvd.
  Can you help me???

  * Method 3: perform a repair of Windows Vista installation *.
  * When you perform a repair installation, it restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.*

  * To perform a repair of Windows Vista installation, do the following: *.

  * Restart the computer
  * Insert the Windows Vista DVD in DVD of the computer dur.*

  * Note If Windows does not automatically detect the DVD, click Start, type : \setup.exe in the search box, and then click Configure in the list programs. Then, click install maintenant.*
  * Click go online to get the latest updates for installation (recommended). *
  * Insert the product key if you are prompted for it.*
  * Click to accept the Microsoft software license terms
  * On the type of installation you want screen, click Upgrade.*
  * When the installation is complete, restart the computer and try again to install updates again.*

  Hey,.

  I m a bit confused now
  What exactly happens on your laptop? You can start Windows?

  I think the article MS says it all: to repair Windows you need a disc of Microsoft Vista.

  Alternatives to reinstall the entire system use the Toshiba recovery disc that contains a picture of the factory settings. Have you created this disk?

• Windows 7 installation / drivers required

  I have a "dv4-3029tx' and I installed Windows 8, wiping existing partitions of the drive (it will my recovery), and it would not start due to no available video driver.

  I want to install Windows 7 from a genuine copy of Windows, no disc HP (that I have not and dat bloatware), but whenever I try, I get "a required CD/DVD drive device driver is missing".

  Here are my options:

  I can't order a new disc of HP (not for my model anyway)

  I can't use Windows 8 (installs, does not start, BSOD)
  I can't even install Windows 7

  I can't use a recovery partition.

  Anyone able to help me out here?

  I solved the problem

  It turns out that some USB ports require additional drivers. I swapped my thumbdrive to another path, and it is installed, no problem!

• Ins work ' t Windows Modules Installer

  I tried to install Service pack 1, it failed due to an 0x800f0826 error.

  I discovered that the Windows Modules Installer, which is required for installation, appearently doesn't work.
  It is not listed in Control Panel > Administration > Services.

  I tried running sfc/scannow in cmd high, and it does not work.

  The TrustedInstaller file which is IS located in the maintenance folder in Windows, but I can't seem to run.

  I also tried to download a registry Fix TrustedInstaller, but it does not help. I tried this solution with PsTools and the file psexec - no difference.

  Also, I also tried to copy another TrustedInstaller in maintenance records, but that makes no difference either.

  I really need help here. Is it possible to get the installer of Modules of Windows to work? Download a new version of the installer of Modules if it is corrupted? My computer is not shipped with a CD/DVD of Vista, so I can't run a Vista repair.

  Please help me!

  You see the effects of a hijackware infection.

  Your quickest resolution would be to safeguard any staff data (which none should be considered 100% reliable at this stage) can do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  CF. http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Note: When you reinstall Vista, the free trial Norton will be also reinstalled (but invalid). You MUST uninstall it, and then rerun the removal tool Norton BEFORE installing a replacement AV app (e.g., F-Secure).

  NB: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you can use to do the clean install. Contact the OEM manufacturer with this.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows update installation update 4 of 5 for 2 hours and did not finish. 28/10/10

  Windows update installation update 4 of 5 for 2 hours and did not finish.  28/10/10

  Hi Mandude,

  What Windows version\edition you run the computer?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard > check if installation of update takes place more quickly

  Step 2: You can follow the steps mentioned in the article below, which deals with a similar question

   

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Sims3: someone can give me a few steps for the sims3 on a windows vista installation?

  Can someone give me a few steps for the sims3 on a windows vista installation?

  Insert the DVD into the optical drive, wait until automatic execution appears, select Run Setup.

  During the installation you will be asked for your key you will find on the booklet inside the DVD case.  It will also go and get the EA Updater software so make sure that you are connected to the internet during the installation.