motherboard burnt

Similar Questions

• Need new motherboard for my Satellite L650 - 1 k 2

  Hi guys!

  Please help me! I have a laptop L650 - 1 k 2.

  -Intel® Core i5 - 460 M Processor
  SuperMulti DVD + r (Double Layer)
  -RAM (1066 MHZ) DDR3 4096 MB (2048 + 2048)
  -ATI Mobility Radeon HD 5470

  3 months ago, the motherboard was burnt. so I said buy a replacement one. This is the information for my motherborad:

  -P/N: PSK1JE-0CY00TEN
  -sps: v000218030
  -REF: 1310 A 2332306

  I can't find an exactally even, but online, a salesman told me that, as long as the sps only. isn't even that it will fit in my laptop.

  so here's my question
  1. the seller learns the truth?
  2. the ATI graphics card come with the motherboard or I have to take off my old?

  I hope some can help me, this laptop is drive me crazy, please help me!

  Alex

  > I can't find an exactly the same, but online, a salesman told me that, as long as the sps only. isn't even that it will fit in my laptop.

  I can't confirm this but always is he that there are different models of L650 on the market which are equipped with different motherboards, but the layout must be the same
  As far as I know the mother is compatible with a chipset Intel HM55 for L650 - 1 k 2 has a reference number: V000218130
  It looks very similar to v000218030

  With regard to the GPU of ATI.
  Not quite sure you should ask your retailer for this but it turns out that ATI GPU is external so removable

• HP 110-200: the chip on the motherboard burned... but it works still should I worry

  

  This is a picture of the motherboard on the net... but mine has a burnt chip right had to put the arrow and a red circle.

  could someone tell me what this chip has been used and if it is vital for the system

  Hello

  I zoomed in a little closer and I do not see a chip as you can see in the image below. However, you must report the problem to the HP support as it may represent a fire hazard.  I ask HP to intensify and investigate your matter.

  

  Thanks for posting on the forum.

• pravilion g6-1379sa, AMD: find the product of the motherboard with the number on the sticker below the RAM cards

  Hey, I got the pavilion g6-1379sa amd e2-3ooom with apu radeon 6380g, chipset a60m.  the main Board if fried.  No start upward, white screen. a flash on the caps lock.  HP support blink County thingie said it is the CPU, but when I took it apart I saw a mounted PCB modual has burnt!  the sticker that keeps boards reference under ram cards isn't here for some reason any.

  HOW WILL I KNOW THE PART NUMBER?  or compatible motherboard?

  any help is appreciated.

  Ok thank you.

• (Redirected) Dell Vostro 1510 does not restart after the replacement motherboard (CPU the question!)

  Dear,

  I have a problem with my laptop (dell vostro 1510). For the second time my screen went completely black. I couldn't see anything, but the computer was not working. I assumed it was for the same reason as the first time (burnt video card). I have replace it with it and when I try to start the laptop I just get three led among that flashes on the left. It is not go further and I don't have access to the bios. The diagnostic led codes say it is a problem with the processor. How can I test if the processor work? For me, it's weird with the old motherboard, it began. I also tried to reset the CPU on a different time slot. I don't know what to try anymore.

  If you have any suggestions please let me know

  Have a nice day

  Gian

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• HP Pavilion A9Y60EA #ABU G6: motherboard damage

  Hello

  I was doing the interview (I'm a computer technician) on my HP G6, associated with a dirty fan, following a "computer coma." In other words, when the Start button / stop was pushed, no lights came, screen was black, computer was completely dead. Later, I found that it works on battery but not on the AC/DC charger. After you run the battery completely, I plugged in the AC adapter and then everything was fine.

  So, to return to the interview, I did, that I cleaned the fan and the output, which was horribly dusty.

  While doing this, I noticed with some surprise some components burnt on the underside of the Board of Directors. You can display a picture of the damage here: PHOTO OF DAMAGE

  I reassembled the laptop and everything works fine. I suspect that the problem is when the battery is fully charged and it changes to the maintenance mode. Should I not allowed to load completely?

  Any suggestions on what needs to be done about it? How to identify the burnt components, etc...? These components are likely to cause further damage to the motherboard?

  Thank you very much for all of the solutions you can give me with.

  Hi there @BitsnPcs,

  Thank you for visiting the Forums HP's Support and welcome! I read your post on the Forums of HP's Support and I looked at the picture which gave you some damage on the motherboard. As those similar to components burned for me as well, I suggest you contact HP Support.

  Please use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number are displayed.

  They will be happy to help you immediately.

  I hope this helps! Please mark this message as an accepted Solution so that other people who have the same problem can find the solution quickly.

  Have a great day!

• 2013: MacBook Pro replacement motherboard or not

  Brain Trust,

  I need some advice here.

  I have a 2013 fully bridged on (500 GB SSD, 16 GB of RAM) MacBook Pro and the sound from the speakers awefully distorted.

  I did all the regular troubleshooting inclusing a clean installation of the operating system, applications 3rd party and the problem persists.

  The distortion is NOT dependent on volume, it is still there, as if the sound is cut at all levels.

  Now, the headset on the port is perfectly clean, so I think I have it narrowed down to the (material) built-in drivers for speakers. I went to the Genius bar and they agreed and recommend a motherboard replacement. Since I have a month left my Applecare, I could do it, but I hesitate. Professionally, I rely heavily on my machine on a daily basis, and I fear that a machine otherwise perfect with zero problems (other than the problem of speaker) will be messed up.

  What is your experience with a motherboard swap and what do you recommend I do? Live with the distortion and contemplate a great Macbook, or opt for repair until the warranty runs out. NB, I have a very old Macbook that I can use for the week or I'll have to miss my machine.

  I'll answer my own question:

  Do it! I had a fantastic experience! Not only was my main problem, distortion in speakers, correctly diagnosed and resolved, since engineering also saw a small white spot on my screen (who had been there forever), I also had a nine screen. Not only that, I got a new valve and bottom plate, so after 3 years of intensive use, my Macbook Pro looks like new again. Total costs under Apple care program: $0.

  It's really the only problem with Aplle MacBooks: my excuse to buy a new went through the window, this machine will last me a few years ago!

• Mac Book Air, failure of the motherboard

  Hi, I bought Mac Book Pro, a year and months back, yesterday, battery is down to 5%, so I continued to support, as I am studying end nyt I closed my MBA. Next day morning day when I tried to show him a folder with question mark symbol flashing. then I tried top in SafeMode it dint'showed hard drive. While I've taken at the authorized Service Center then they said his mother board failure and asked me to pay 42000INR. Is it really motherboard problem? What are the other options of best for me? and this is the price charged for the motherboard, even as they say? can I have any apple legal right againt for replacement?

  You can test it by connecting via USB, a boot disk.  If the Mac recognizes, the Mac, boots, then the internal drive or connection that is the problem.  Is it is not recognized, then it may very well be a logic card problem.

  Ciao.

• PowerMac G3 minitour - identify a 333 MHz motherboard

  When I bought my first PowerMac G3 Beige minitour, I didn't know that, for what I was going to use it, I needed the version of 333 MHz, and one I bought turns out to be a unit of 266 MHz. Subsequently, I found a machine at 333 MHz and it's all configured and up and running. Now I want to transform my machine 266 a 333 to have as a backup.

  So, what I am wanting to know is this...  If I replace the motherboard on a 333 266 a, that is all that is necessary to make a machine 333?

  In addition, the part Apple no on my 333 motherboard is 820-0991-B. This means that if I find a motherboard with Apple no. 820 - 0991 - B, it will be a motherboard 333 MHz or there something else involved in the equation?

  If no, is there any there any identification #s on the processor itself I need to know, from (IIRC) it connects?

  Thanks for any help,

  Tom

  The A, B, and C after the logic card number denote a logical Board review, not a processor speed. You want a Rev b or C - Rev A is supported only as a single unit by ATA cable so that B and C models support two - nice addin fo additional drives.

  Otherwise, the card G3 Beige of logic in the framework should be fairly generic. The G3 processor is nested, so it is easy to change the processor. One of my Beige G3s (both are rev C) began as a 300 mHz machine and I upgraded the processor at 500 mHz. You can just install a faster processor into the processor socket for a faster Mac - no swaps logic card are required.

  Other factors are controlled by a single processor jumper block. See this diagram:

  

  Is Apple is easy with a single base card which can be equipped with different CPU speeds using these riders. The setting for the jumper blocks are here:

  https://Web.archive.org/Web/20000505093026/http :// www.bekkoame.or.jp/ ~t-imai/g3a e1.html

  More overclocking here:

  http://lowendmac.com/1997/overclocking-beige-Power-Mac-G3/

  People get into trouble, try to change the bus speed 67 mhz by default and the PCI bus to something higher, especially of you had a sort of installed PCI card. However, you can leave these single speeds and still make some minor adjustments to only the CPU clocking riders.

  Apple had factory no block CAP that set all the parameters for a model at the same time. Overclockers remove the CAP from the factory a piece and use of small riders similar to those used on ATA drives (2mm I remember well), or simply to jump the connectors exposed in the block from the factory with a little short of gold thread.

  It's been long since I was inside my two beasts of Beige, but if you have any other questions, I can possibly to jog my geriatric memory of these things.

• 'Burned' fingers index to use MacBook Pro trackpad: my both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  Yes, I did

  My both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  I do not have this problem before, I bought my new Mac - specifications below: it hurts and I don't have a problem with my windows, iPad or Samsung Galaxy equipment operating systems computers.

  It feels like radiation leaking through the computer case.  Is the radiation involved in the chips?

  MacBook Pro

  Model identifier: MacBookPro11, 4

  Processor name: Intel Core i7

  Processor speed: 2.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Boot ROM version: MBP114.0172.B06

  Version of the SCM (System): 2.29f24

  Are you use while plugged in, I feel a buzzing in my 13-inch rMBP (12.1)

• motherboard not worknig

  iPhone 6 does not, perhaps due to motherboard problem. What will be the next step?

  Make an appointment at the Genius Bar at your local Apple store. Unless, of course, you have already disassembled the phone. So, you're pretty much on your own.

• Motherboard dead how do my old favorites in my new motherboard? I hid it.

  Motherboard died enough said. I have an external hard drive with the old Firefox in it. Firefox search for Firefox.

  You may need to display the hidden files and folders in Windows 7, via Control Panel > folder-> Display Options

• MacBook Pro 2011 w/new motherboard

  In December 2014, I replaced the motherboard in my 15 "MacBook Pro (early 2011). I use Yosemite 10.10.5 and Safari has become practically unusable. My main software is the word: Mac 2011. Put it all together, I'm really bad at ease on the upgrade to El Capitan. Could someone give me some information?

  Please run a report of etrecheck and post the results here for more analys

  http://etrecheck.com

• Replaced the motherboard and the HARD disk and now you try to transfer the old TB on the new, but cannot locate the files on the HARD old disk which is now the drive 'E '.

  My computer has stopped working completely and I was going to upgrade in any case, I advanced the work.
  Having replaced everything (motherboard, HARD drive) and everything worked as it should I turned my attention to my emails.
  I tried the Transfer Wizard Windows 7, no joy. Tried to find the profile files, no joy. Just can't find anything about it either remote seems to be linked to tuberculosis.
  HELP Please
  Thank you

  Profile of Thunderbird folders are hidden files, so first make hidden files visible.
  http://KB.mozillazine.org/Show_hidden_files_and_folders

  The location of the profile: http://kb.mozillazine.org/Profile_folder_-_Thunderbird
  Even if your files are now in drive E, not C.

  Info on moving to a new pc: http://kb.mozillazine.org/Move_to_a_new_PC

  If you have downloaded Thunderbird to new pc and run it for the first time, it will create a profile, but do not create the exisitng e-mail accounts. Then you copy the contents of the old drive hard e: drive - profile folder (not the folder real profile, that all the files in the profile folder) and paste them into the profile folder overwrite the default files.

• No automatic updates with the new motherboard. The adjusted settings as advised by your article, restarted the computer - nothing. Downloaded new copy, same problem.

  I get a notification that there is a new update for Firefox and click on it, but the computer is unable to connect to the server and download (if not internet connection works perfectly). I downloaded a new copy and the problem was not solved. I went to your site and set the parameters as indicated by your article, restarted the computer and it is still impossible to have an automatic update as before. (Before the change of the motherboard on the computer of authorized service everything worked fine).

  Try to remove FF from your pc and then it re-download the new version.