Motion sensor doesn't work is not in my 250 ssd macbook pro early 2015

I want to know that my macbook a SMS in it or not how please help

SSDS have no moving parts, so no need to SMS

Tags: Notebooks

Similar Questions

  • I have a brand new installation of 13 PS elements. How I have difficulty drag and drop doesn't work is not on my system Windows 7 Pro 64-bit?

    I just installed PS 13 items on my system Windows 7 Pro 64-bit. Mouse clicking works, but how I have difficulty drag and drop works do not? For example, I can't create a selection rectangle or drag the sliders or move the panels of the tool or resize a text box, I tried as an administrator (it does not help). Same "ClickLock" in Windows does not drag. No other program on my machine has problems. Help!

    Reset preferences did not set anything. Even reinstall 13 elements PS has not fixed anything.

    However, late breaking new...

    See other discussions on this topic, which suggests a conflict of startup program that might be the cause, I did some experiments.

    All the functions of the mouse to 13 PS elements worked well if I started my Windows 7 in "safe" mode
    So, back in 'normal' mode, I manually disabled all startup programs. Returned mouse problem.
    Enter the control panel "services", I disabled 'Synergy' (a program that allows me to share my keyboard and mouse between two computers). Fixed a problem.
    The reactivation of all the startup programs while leaving a synergy service is turned off, everything works still fine.
    Start all programs present and re-empowerment synergy, but turned off its 'high privilege check box. Everything is still fine.

    Conclusion: Synergy in high privilege mode service was the only culprit.
    Synergy in non high mode allows my PS 13 items and keyboard/mouse sharing to coexist.

    The strange thing is that only PS elements 13 was affected by synergy. I detect no problems anywhere else. But it doesn't matter; the new arrangement (no high synergy) works fine for everything.

    Al

  • ISO burned, boots, but does not end... MacBook Pro (early 2011)

    Downloaded the right firmware (thanks for the advice - the ID of the box compared to the system profile ID - they were different).  It burned on a CD, booted from it.   I must say here that my old internal DVD/CD is now external because I put a HD instead.  The boot goes to black screen, a text scrolls at top, then it goes to a command prompt flashes and sits there.  CD towers down and nothing heppens.  If there is a period of time between the first line and continued to give, I'll try again, but I felt that it was fine.  Don't want to go mucking around and make the SSD to become a paperweight, so I stopped for now until I hear back.  I don't think the fact that the SuperDrive is now external is originally the one, because it does not start.  I do, however, not press 'C' to start, I use the Option key to select the disc.  The disk is external now maybe isn't able to do (did not try).

    I have DSS take - the box it lists as a DHP, shows the system report: SanDisk SDSSDH2256G.  So I downloaded the H2 version.  I do not know how critical this update of the firmware is, if it's not I'll stop trying because he could end up in disaster if done wrong.

    Thanks for the tips.

    Tom

    IIRC external CDROM cannot be used. I would like to move the HARD disk to the CD/DVD drive do the update and then replace the HARD drive in

  • with firefox 43 yahoo and yahoo mail doesn't work does not correctly

    With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

    I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

    Thanks for the help!

  • spell check doesn't work is not in outlook on windows 7

    Hi the spell checker doesn't work is not in my outlook for windows 7. This can be corrected?

    Sincerely, Robert H.C.

    Outlook.com has a manual spell at the top next to the options button control. It won't appear that if you write an e-mail AND if your browser is not checking spelling himself. In most modern browsers the spell checking is done by the browser itself and may need to be enabled in this browser

    IE , it depends on the version you have.

  • DNG Converter doesn't work is not on a camera called raw photo

    DNG Converter doesn't work is not on a raw photo camera that always comes back with this Message "check if the camera is recognized.   "

    Supported cameras Camera Raw plugin | Compatible cameras

  • LR 5 doesn't work is not on the new Macbook Pro.

    LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

    Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

  • Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

    Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

    What specific mouse?

  • My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

    My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

    Even if it is very slow, you must make a return upwards before the race "repair disk". The risk of data loss is minimal, but do it anyway: Save and run to repair the disk.

    As for what it implies - most of the time nothing more than simply sitting and waiting to do his thing.

  • I have a MacBook Pro late 2015, every time I have out of mode 'sleep' it is frozen and I turn it works.  Anyone know why this is happening?

    I have a MacBook Pro late 2015, every time I have out of mode 'sleep' it is frozen and I turn it works.  Anyone know why this is happening?

    Contact Apple for support and service

  • to restart my macbook air early 2015 in windows 8.1 to begin the installation it tells me that usb drivers could not be found, what should I do?

    to restart my macbook air early 2015 in windows 8.1 to begin the installation it tells me that usb drivers could not be found, what should I do?

    It downloads everything and restarts in windows 8.1, then when I click on install now a message pops up saying that miss me the disk drivers important that I don't know what to do

    This is an incorrect error message. Please post the exact error message or a screenshot of the error, if possible.

    See also no drivers were found and the reference to AppleSSD.sys.

  • WiFi doesn't work do not

    A year and half ago we bought a new Mac and the Time Capsule (TC) to go with it. I tried to set up at the start and think about this topic, I do not think that it has never worked properly. I say this because we got a new modem without router because time Capsule has an inside, and we are unable to connect to wifi. I have a TB Ethernet connection and if I can get online in this way, but the WiFi does not work. Last night, I went through and set up and the WiFi worked, but today it no longer works and I can't seem to do it again.

    The indication of WiFi signal says I'm connected, on my Mac and on our phones, but when you disconnect from data it no longer works. It's very frustrating because I don't want to have to go back to a modem/router of the rental of our cable company.

    We have just upgraded to OS X El Capitan 10.11.6

    When it worked last night I created everything from scratch. But I do not think that I would have to do every time I need to use the internet. I also tried to create a WiFi with a custom DNS but that doesn't work anymore.

    Any help would be appreciated.

    Thank you.

    Amazing!

    I am so embarrassed but understand that I would update in the case where everyone does the same thing.

    When I put in 1.5 years ago I went from ethernet cables. The Ethernet cable from the modem was connected to the LAN port and the Ethernet cable from the Mac was connected to the WAN. Once I put the cable from the modem to the WAN everything has worked.

    Sometimes, just come back to square one.

  • Crossfade doesn't work does not in iTunes 12.4

    I use OS x El Capitan 10.11.1. set iTunes to automatically level to 12.4. I played music on a playlist with crossfade turned on, but none of the songs crossfaded. I am aware of crossfade doesn't work every time that the songs are played in order any of the same artist and album, but my playlist was not organized as such, so it should work. I tried to turn the market feature and quit iTunes and restart, but no luck. Any suggestions?

    Although I usually do not use this feature, you seem to be correct.  Can operate either...  You can report the problem here

    https://www.Apple.com/feedback/ (under OS X Apps - iTunes)

  • Touchscreen doesn't work is not for the Satellite U920t - 10 p

    Please read this completely before you answer with your copied and pasted answers.

    My touch screen lets you stop work, but was still attached with a reboot of the machine.
    Now it doesn't work at all and * I've tried everything posted elsewhere in this forum *.

    I tried to change the settings for battery power, try to update the drivers (not exactly who is right though!).

    Please can anyone help because it is a new machine and it's very frustrating.

    Serial number: 7D054633H
    Model: Toshiba Satellite U920t - PSUL1E-01900JEN 10 p

    Thanks in advance.

    > Please read this completely before you answer with your copied and pasted answers.
    IMHO, I n t think that someone here in the forum doesn t read the messages before playback
    I hope that this part of your post is just the result of frustration due to the malfunction of the notebook...

    Back to your question:
    > I tried everything already posted elsewhere in this forum.
    and what does this mean? What have you tried exactly?
    Have you given zero and plant control panel?

    If not try and in the case where this help not the laptop's hardware could be affected which requires new checks of material by an authorized

  • HP 14-r206nv: light wireless led doesn't work do not

    I have a very minor issue that don't mind operating of the laptop, but I'm curious to know why it does not work, because I know that before reinstalling windows it worked normally.

    Well well, to the point now. After a hard drive failure and replacement, Windows 8.1 are installed again and each driver has been installed and works well. The only thing that doesn't work is the led light button wireless (F12). The button is working correctly, activation and deactivation of the Wi - fi, but not the led. It lights, neither white nor red, it is always disabled.

    The model of the wireless card is Realtek RTL8723BE.

    I installed the drivers from the HP site.

    Version of the driver for the wireless card is 2013.8.915.2014

    The version of the wireless button driver is 1.1.7.1

    I tried the latest drivers for the card (an optional windows updates finds) implemented to date for this and the wireless button (if I try update driver in Device Manager, it installs a new) but nothing has changed for good so I decided to go back to what the official site suggests and post here.

    Hi @v1184,

    Thank you for your inquiry.

    I understand that you had a hard drive failure and he had to be replaced, you did. You reinstalled Windows 8.1 and all drivers are up to date.  The only problem you are having is that the wireless button light does not illuminate, but it does not work.

    You tried to update the wireless driver button, but has not changed, so you returned back to the recommended HP driver.  As the wireless button does not work it is not the driver, however, it could be that the light burned. The other possibility would be that when you replaced the hard drive, the connection has been dislodged or disconnected and must be reconnected.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on ' Thumbs Up ' below is a great way to say thank you!

Maybe you are looking for