Motorola ICS official demo videos

Similar Questions

• Re: Annoying the retail demo videos... Help, please...!

  I have the same problem with my new Sony xperia M4 Aqua. I can't do anything on the phone because it shut down by itself and the video start playing all the time. I close the Bluetooth, NFC, but after a few seconds, they opened in itself. Applications and widgets is that it self. The settings does not meet my settings how I want them to be. Please help me. :'(

  Can you open the dialer and write * #* #* #* #73556673?

• Captivate 7/8 demo video mp4 video file plays only not on WIndows Media Player

  I created a video demonstration using Captivate 7, then 8 Captivate. I have published on my computer as an mp4 file. When I play the MP4 file on WIndows Media Player audio plays but no video. My settings look good.

  I run when I have it loaded as content to Adobe Acrobat Connect Pro. Audio and video playback with no problems. This could be a problem in WIndows Media Player? This just started happening.

  I was able to contact Adobe Support. They had me try on the video release settings to change the preset custom YouTube Widescreen HD. This seems to fix the problem and the MP4 Player now plays in WIndows Media Player

• Motorola ICS update

  When do you think they're going to update the page that indicates the wifi xoom is still on version 3.2 or change some of them?

  We don't have any information on when it will be updated. I don't know there will be a lot of talk when it does. In the meantime, we invite you to talk about it here.

  Double locking this thread.

  Mark
  Support Forums Manager

• request for official ics 4.0.4 kernel only neo v?

  Hi friends, can anyone view kernel.ftf ics ics official 4.0.4 for neo v... Thank you

• Convert a video demo in an interactive software simulation

  I recently created a video demo of long hours of a function of demand, which I cut up into convenient bitesized pieces. It took me forever...

  It was created with love and sure for what is said in the brief, I was given - but my memory has been mysteriously changed, and an interactive software simulation has therefore been requested. GRrrrrrrrrrr!

  I have a white fully draw on it, but is possible to convert a video demo in an interactive software simulation? It may be obvious, I can be stupid, or maybe there's not a way to do it at all, but any advice on this would be greatly received!

  No, Brendan, I'm sorry. An interactive software simulation will be a cptx project, while the video demonstration is a project of cpvc. You can use the storyboard, assets may be static if you added to the demo video, or using a part of the VO if you had them.

  A software simulation in Captivate is based on leaves, not video. You may want to use small pieces of the video when necessary. An example: to replace the blades FMR which are inserted automatically when you use scrolling or dragging in the simulation. Due to their poor quality, I mostly replace it with CPVC-slides, that you can create from our project cpvc and insert into the project main cptx.

• Recording a video demo of full-screen as a slide of record

  I'm used to create empty projects with different types of slides - simulations, demos, content slides, etc.  If you choose to record a demo video inside these presentations, it seemed forced to switch my application window in the small red box.  If I record a new video demonstration as a project, I have a lot more options like mode full screen.

  Is there a way to record a video fullscreen demo as empty a record slide to insert into my project?  I know that I check just a bunch of individual projects video demo as insert as 'media' in my vacuum was planning, but what disturbs and lots of time.  It also creates confusion because the project itself and the video demonstration both of control bars.

  Try to record a video demo inside Photoshop, for example, is really difficult inside this little tiny window.  Also, I prefer not not pan, which I find shocking and useless for my students.

  Any thoughts?

  Hello

  First, you should note that with any project you create (assessment Simulation, demo, demo, Etc.) once you configure this initial size, that's what you are locked in. So if your computer maybe has a resolution of 1366 x 768 and you create a project at 800 x 600, there is no way to really present a slide to a size larger than 800 x 600, because it is the resolution of your project. Of course, you are able to record a video demo to create a CPVC file, then inside one. File CPTX, you can click Insert > CPVC Slide (at least in version 7, it's how it's done. May be different if you use 8).

  You can, however, add some tools to zoom and pan for the video demo. I know that you are avoiding panoramic, but one can think of pan in the type "stop motion" registration and pan is not that you're able to achieve using the video demo.

  See you soon... Rick

• Add a video demo for another demonstration video

  I have recorded two demos video and would like to combine them into a single video demonstration. Is this possible in 8 Captivate?

  Hello

  Open them two change, then right-click on one of them and copy.

  In the second, then right-click and paste. Pouf! Video handset!

  See you soon... Rick

• Problems with editing of the video demo...

  Hello

  I have created and edited a video demonstration, which, while in Demo Video Edit mode, everything works as expected, but when I returnin the blade in the film with the slide I made the video on, I saw the slide, but all items are not there... the images that were in the video editing mode are there , but not in the CP file...

  I hope someone can help :-)

  See you soon

  Sabine

  Here is the timeliine in video editing mode

  

  And it's the normal timeline view

  

  Hi Sabine,.

  I am sure that many users do not know the difference. For this reason (do not earn points, really) I would ask mark you this thread as answered. There is no so many questions on all video editor, for some reason (I have my ideas on these reasons). And it's very important to know that you have to add and synchronize static objects in the video editor, even for a dia cpvc which is inserted into a cptx file, because when you insert these objects into the workflow normal editing for cptx-slides, they will never show upward because the video is still on top. When the thread is marked as replied, hope more people with similar problems will find.

  Lilybiri

• How freeze (extend) a video demo recorded to add more audio?

  I made a few demo video recording in Captivate 6.  There are a few places where I need to freeze the image so I can fit all my audio.  (I'm not good at telling while I save).  In addition to splitting the video and adding white space inbetween, is there a way to create a "freeze frame", storytelling can be completed before the next part of the video?

  I use workaround is to create in the video and the trimming of long pauses, but who is causing extra work.  Thanks in advance for your suggestions.

  Hi GunBroker,

  Welcome to the Adobe Forums.

  You can try an alternative which, instead of using the demo video you can use "Software Simulation" and in respect of the registration window, choose the option "Demo."

  Now, when you add audio to the slide, it will give an option to make the same as the audio duration slide duration.

  Thank you

  Loveesh

• Help! No instructions on moving from 2.3.4 to ICS? IdeaPad A1

  is there anyone can help with the installation of ICS on A1?

  Displacement of 2.3 last to ICS official version

  ---

  A1 16G

  
  

• My Media Center doesn't recognize most any video file.

  I know that I uninstalled a demo of video converter program because I bought another. The demo was Prism-video converter and had some other demos video app delivered too. I can always convert the video files in my new program. I can read files in Media Player and other video applications. I uninstalled and reinstalled Media Player and Media Center. I deleted the locations of media and add them. Moved files in other places and tried to add these new folders too. Running Windows 7 64 bit. I also tried to reinstall several codecs too. My Xbox can't see files and can not either my local Media Center. He can't even pick up my .wmv files. Been a week now, extremely frustrating. Can someone help me please? I've read several similar messages, but the things they have tried have not worked for me.

  http://www.hack7mc.com/2009/01/adding-MP4-files-to-movie-library_22.html
  could help you.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• I can not find download for Windows Demo loop

  Hello

  Can I download Windows Demo loop for Windows 8?

  In a store on a computer have their Demo Windows loop

  Windows demo loop description:

  When windows start demo loop start a demo video screensaver or something

  Thanks for the help!

  Hello

  There is no such application called Windows demo loop in the Windows Store. If you need to download the application on any third-party source you can download it and install it in your own risk.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  If you want to learn more about Windows 8, I suggest you to refer to the article mentioned below and check if it helps.

  Tutorial Windows 8 and Windows RT
  

  http://Windows.Microsoft.com/en-us/Windows-8/tutorial

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• .swf media (video) not playing on preview or publish

  Hello

  I have a responsive project in Captivate 8. I have a demonstration of the software when it scrolls, that Captivate seems to turn into a flash animation. Publish or preview, the screen remains white and nothing only shows or charges. This happens in all three breakpoints.

  The media is in the library under "media - Fullmotion11_1.swf".

  Can you help me solve this problem?

  I avoid FMR slides where possible (instead of scrolling, just by clicking on the scroll bar can be done in many situations) or replace them with cpvc-slides. These slides will be published in mp4 and are compatible with the HTML output. You can download the file after the publication?

  The workflow is little more complicated if you want to use CPVC-slides. He must put end to the sim of software just before recording the FMR slide is expected. Then use the button slides, demo video and you will be able to capture the movement of the mouse, scroll, by dragging. When it's over (you will be able to use both video editor), you can add more software sim classic slides. To replace a FMR slide after full registration is completed is harder, because you need to configure the application captured in exactly the same situation with regard to the FMR slide.

• How we prevent stop video capture on the software simulation mode

  Hi all

  I recorded a video of my software, a non-interactive tutorial ( software simulation mode and record mode: demo).

  My software has a debug window showing the values that change frequently.

  In my video, I would record this debug window and do some action on it (this window has a toolbar).

  Captivate correctly save the pointer of the mouse but when i, e.g. clicking a button of toolbar, Captivate adds a legend of text (rightly) but the video stops (the values on my watch freeze).

  How can I stop this behavior?

  Thanks in advance

  You can add static images in a video demo as well. Take a look at this (old) example that was performed using only the demo video:

  Simple to advanced standard Action in Adobe Captivate - YouTube

  Often, I will replace the 'old' FMR slides, still not well displayed in the HTML output by slides CPVC (short video slideshow). I stop recording software, in the project cptx choose the big button "Slides" insert a slide of demo, the recorder is opened and I save the CPVC slide. When you are finished, you can insert with the same touch of Simulation software slides etc. Advantage: you can open the editor video demo of each slide CPVC. Pan/zoom have a much better quality you can achieve with the workflow software sim.