Mounting 4 k RED in CS6 files, means SLI help in reading and publishing? (GeForce GTX - 760 vcard)

Similar Questions

• Need help: UTL_FILE read and write in the text file

  Hello, I'm on version 11 GR 2 by using the UTL_FILE function to read a text file and then write the lines where it starts with the word "foo" and put an end to my writing in the text file where the line with the word "ZEN". Now I have several lines that begin with 'foo' and 'ZEN' allow a paragraph, and in this paragraph, there is a line that begins with "DE4.2". Therefore,.
  I need to write all of the paragraphs that include the "DE4.2" line in their beginning and end of lines 'foo' and 'ZEN '.
  
  FOR EXAMPLE:
  
  FOO/234E53LLID
  IT'S MY SECOND LINE
  IT'S MY THIRD LINE
  DE4.2 IT OF MY FOURTH LINE
  IT'S MY FIFTH LINE
  ZEN/DING3434343
  
  FOO/234E53LLID
  IT'S MY SECOND LINE
  IT'S MY THIRD LINE
  IT'S MY FIFTH LINE
  ZEN/DING3434343
  
  I'm only interested in writing the first paragraph tha includes line DE4.2 in one of the paragraph of lines not the second ther that does not include the "DE4.2".
  
  Here is my code so far:
  
  CREATE OR REPLACE PROCEDURE my_app2 IS
  Utl_file.file_type INFILE;
  outfile utl_file.file_type;
  buffer VARCHAR2 (30000);
  b_paragraph_started BOOLEAN: = FALSE; -flag to indicate which required paragraph is started
  
  BEGIN
  -Open a file to read
  INFILE: = utl_file.fopen ('TEST_DIR', 'mytst.txt', 'r');
  -Opens a file for writing
  outfile: = utl_file.fopen ('TEST_DIR', "Out.txt", "w");
  
  -Check the file is open
  IF utl_file.is_open (infile)
  THEN
  -lines in the file in loop
  LOOP
  BEGIN
  UTL_FILE.get_line (infile, buffer);
  APPLICATION STARTING POINT-
  Buffer IF LIKE 'foo %' THEN
  b_paragraph_started: = TRUE;
  END IF;
  -SEARCH FOR GRADS APPS
  IF b_paragraph_started AND buffering LIKE '% 4% ' THEN
  UTL_FILE.put_line (outfile, buffer, FALSE);
  END IF;
  -REQUEST FOR ENDPOINT
  Buffer IF LIKE '% ZEN' THEN
  b_paragraph_started: = FALSE;
  END IF;
  UTL_FILE.fflush (outfile);
  
  EXCEPTION
  WHEN no_data_found THEN
  EXIT;
  END;
  END LOOP;
  END IF;
  UTL_FILE.fclose (INFILE);
  UTL_FILE.fclose (outfile);
  EXCEPTION
  WHILE OTHERS THEN
  raise_application_error ("-20099, ' UTL_FILE unknown error");
  END my_app2;
  /
  
  When I run this code I get only one line: DE4.2 it ME LACK THE WHOLE PARAGRAPH
  
  PLEASE ADVISE...

  I agree with reservations of Justin on the length of a "paragraph" and the number of users that are running at the same time, so here is a version without the collections.

  CREATE or replace PROCEDURE my_app2 IS
     infile utl_file.file_type;
     outfile utl_file.file_type;
     buffer VARCHAR2(30000);
     b_paragraph_started BOOLEAN := FALSE; -- flag to indicate that required paragraph is started
     b_toprint BOOLEAN := FALSE;
     l_para_start pls_integer;  -- start of "paragraph"
  BEGIN
     infile := utl_file.fopen('TEST_DIR', 'mytst.txt', 'r');
     outfile := utl_file.fopen('TEST_DIR', 'out.txt', 'w');
     LOOP
        BEGIN
           utl_file.get_line(infile, buffer);
           IF buffer LIKE 'FOO%' THEN
              b_paragraph_started := TRUE;
              l_para_start := UTL_FILE.FGETPOS(infile) - (length(buffer) + 1);
           END IF;
           IF b_paragraph_started and buffer like '%DE4%' THEN
              b_toprint := TRUE;
           END IF;
           If buffer like 'ZEN%' THEN
              IF b_toprint THEN
                 UTL_FILE.FSEEK(infile, l_para_start);
                 utl_file.get_line(infile, buffer);
                 while buffer not like 'ZEN%' loop
                    utl_file.put_line(outfile,buffer, FALSE);
                    utl_file.get_line(infile, buffer);
                 end loop;
                 utl_file.put_line(outfile,buffer, FALSE);
              end if;
              b_paragraph_started := FALSE;
              b_toprint := false;
              utl_file.fflush(outfile);
           end if;
        EXCEPTION
           WHEN no_data_found THEN
              EXIT;
           END;
     END LOOP;
     utl_file.fclose(infile);
     utl_file.fclose(outfile);
  END my_app2;
  

  Test:

  SQL> !cat mytst.txt
  FOO/234E53LLID
  THIS IS MY SECOND LINE
  THIS IS MY THIRD LINE
  DE4.2 THIS IS MY FOURTH LINE
  THIS IS MY FIFTH LINE
  ZEN/DING3434343
  
  FOO/234E53LLID
  THIS IS MY SECOND LINE
  THIS IS MY THIRD LINE
  THIS IS MY FIFTH LINE
  ZEN/DING3434343
  
  FOO/234E53LLID again
  THIS IS MY second SECOND LINE
  THIS IS MY second THIRD LINE
  DE4.2 THIS IS MY second FOURTH LINE
  THIS IS MY second FIFTH LINE
  ZEN/DING3434343 again
  
  SQL> exec my_app2;
  
  PL/SQL procedure successfully completed.
  
  SQL> !cat out.txt
  FOO/234E53LLID
  THIS IS MY SECOND LINE
  THIS IS MY THIRD LINE
  DE4.2 THIS IS MY FOURTH LINE
  THIS IS MY FIFTH LINE
  ZEN/DING3434343
  FOO/234E53LLID again
  THIS IS MY second SECOND LINE
  THIS IS MY second THIRD LINE
  DE4.2 THIS IS MY second FOURTH LINE
  THIS IS MY second FIFTH LINE
  ZEN/DING3434343 again
  

  You may need to change the length (buffer) + 1 depending on your platform and if you want a blank line s NLE out paragraphs, add another call to put_line after that outside of the loop in the fi l_toprint block.

  John

• CC and CS6 file sharing

  Hello

  I am an intern with a business in the United Kingdom. My boss has Adobe CC and I have Adobe CS6. After a long conversation with support, told him that I did not buy Adobe CC and we should be able to share files very well. However when I tried to open its files on my laptop it says "the project is damaged, cannot open."

  After talking with support once again, I had to ask in the Forums.

  Peuvent some please help? Is it possible to share files of project between CC Adobe and Adobe CS6?

  Project files are generally NOT retro-compatible because of the new features of CC that mean internal changes in projects

  You might ask about workarounds in the forums for specific programs

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll

• When open files in Photoshop CS6 files icons gone white with black box.

  When open files in Photoshop CS6 files icons gone white with black box. When I closed and exit the program, and then reopen its tracks for a few beautiful minute. but after half an hour, when I once again use Photoshop, it shows the error.

  Please give me a solution.

  All your windows updates are installed?  Try to clean the Windows thumbnail species.  I think use Adobe the OS dialog for features like open file. Also, to get thumbnails for RAW file PSD files, you will need to install codecs in windows. I use the fastepictureviewer codec package. What version of Windows are you using the dialog box look like a windows problem.

  

• Unable to save photoshop cs6 files in drobo 5 d

  I have PS cS6 v 13.0.1 x 64 and a Drobo 5 d. When opening an existing file of great and try to save, I get an error that says it can't save due to the disk error.

  I can create and save a new single file.

  But the photos files that exist on the drobo will not save even if recording to a new file.

  Hi Mike,.

  Please see the discussion below.

  PS CC2014 "cannot record due to a disk error' lately

  Let us know if that helps.

  Kind regards

  Mohit

• I can not find, select, install the appropriate SR2 extended RAW for Phtoshop CS6 file to use with my Canon 5DSR camera... Please help

  I can not find, select, install the appropriate SR2 extended RAW for Phtoshop CS6 file to use with my Canon 5DSR camera... Please help

  Hi drdrum,

  Greetings!

  Update the software of camera raw as Canon 5DSR is supported camera raw version 9.0 and above.

  Here is the download link: https://helpx.adobe.com/x-productkb/multi/update-error-u43m1d204.html

  Also, here is the list that displays the camera with respective camera raw support:https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Concerning

  Jitendra

• Meaning of lines hostCPUID, userCPUID, and guestCPUID in the vmware.log file

  I'm trying to get a solid knowledge about the exact meaning of the hostCPUID, userCPUID and guestCPUID entries in the vmware.log file.

  I'm well versed in masking of CPU and I know how to change masks with cpuid. < number >. < enter > = 'XXXXXXX '.

  I guess the 'host' in hostCPUID is the bits real raw CPUID reported to ESXi by the host CPU.

  What is less clear, exactly what are the values 'guest' and 'user '. Based on the name, guestCPUID looks like the bits of functionality exposed to the virtual machine. However, I don't see how the guestCPUID is established, in view of the hostCPUID and my own cpuid. < num >. < Register > masking. Maybe there is some other implicit mask takes into account as well?

  And finally "userCPUID"is completely baffling to me." Maybe something to do with the CPUID features in a mode not ring-0?

  Any clarification would be helpful. Many hours of research on Google are not getting obvious answers.

  Thank you

  Matt

  MattPietrek wrote:

  I'm trying to get a solid knowledge about the exact meaning of the hostCPUID, userCPUID and guestCPUID entries in the vmware.log file.

  I have poured into the masking of CPU and I know how to change masks with cpuid. . = "XXXXXXX".

  I guess the 'host' in hostCPUID is the bits real raw CPUID reported to ESXi by the host CPU.

  What is less clear, exactly what are the values 'guest' and 'user '. Based on the name, guestCPUID looks like the bits of functionality exposed to the virtual machine. However, I don't see how the guestCPUID is established, in view of the hostCPUID and my own cpuid. . masking. Maybe there is some other implicit mask takes into account as well?

  And finally "userCPUID"is completely baffling to me." Maybe something to do with the CPUID features in a mode not ring-0?

  Any clarification would be helpful. Many hours of research on Google are not getting obvious answers.

  Thank you

  Matt

  You are basically correct.  GuestCPUID represents the bits of functionality exposed to the virtual machine.  In addition to your mask, there are masks applied depending on the features supported by the virtual hardware.

  UserCPUID, this is what will be visible to code ringtone-3 comments running in native mode if you use the binary translation.  With binary translation, usually only ring-0 code (or IOPL-3) is subject to the binary translation.  Most ring-3 of the code is running in native mode (in the mode that we call "direct execution.")  Before the introduction of CPUID failing, it was impossible to intercept comments the CPUID instruction execution when the guest was performed in direct execution.  Some processors support a limited ability to derogate some CPUID leaves (on a basis of registry by registry) even without intercept the CPUID instruction.  Therefore, userCPUID is based on hostCPUID, but records that can be replaced have values of guestCPUID.

  These fields are rewritten in every market, so there is little interest to change them manually.

• PS CS6 files are now inflated by 1.4 MB

  I use PS CS6 (13.0.1) 64-bit with Windows 7.  I noticed recently that the new files created in PS are inflated by nearly 1.4 MB. For example:

  I go to file > new > pixels of width 100 height 100 pixels, RGB, 8 bit, profile sRGB color

  He said that the "Image size" is 29.3 KB. Click OK, and then save the file as a JPEG or TIFF file and the files size is slightly more than 1.4 MB. I checked the metadata file in Bridge, but nothing that could explain the extra 1.4 MB. I open a JPEG with XnView and saved the file with 'keep IPTC data"unchecked and the size of the file is down to 12 KB. There is no entry of IPTC data in the original file of PS review of metadata in Bridge or EXIF tool GUI.

  What is interesting is if I import the same file 1.4 MB + 4.4 Lightroom and export the Full-Size, the file size decreases to 16 KB. This indicates to me that there are 1.4 MB of data being added to the "new files" created inside the PS that is not seen or used by Lightroom 4.4

  I know that I can use "Save for Web" to reduce the file size by removing metadata, but I would like to identify what is the origin of the 1.4 additional MB.

  I am inserting a 1.4 MB + 100 x 100 pixel JPEG file here, but not sure if the Moose metadata or file size is selected:

  

  OK, I had little time to investigate this part more. I created the same 100 x 100 pixel 'New file' PS the 32-bit version and the file size is 12 KB. On a hunch, I renamed the PS 64 bit the file 'Adobe Photoshop X 64 CS6 Prefs.psp' preferences, to force the PS to create a new preferences file. It seems to have fixed the problem and now creates a file size 12 KB! It seems that all the "new files" created in PS 64 bits have been added with the printer profile of Costco, which I could see by opening the JPEG file with Windows Notepad. The size of the text file has been 1.4 MB, resulting in indigestion. Why he past I have no idea, but it's fixed now.

  Noel, thanks for identifying the problem and allowed me to solve the problem.

  See you soon,.

  Todd

• InDesign CC hangs when opening CS6 indd file... help?

  New computer, Windows 8 fresh 64 bits, installation of Adobe installed CC InDesign CC, tried to open my book project CS6 (a about 19 in indd documents) and CRASH "Adobe InDesign CC has stopped working". No report or the newspapers that I see. I was working with these files with InDesign CS6 on another machine yesterday.

  Been sufficiently updated InDesign to know that this is definitely not normal.

  Any help here? I can't work up until it's settled.

  You could try to export individual documents of the file book as .idml (with a new name) and import it back into a new CC file book.

• CS6 - file zip on a DVD like OSI, or...

  Win 7 - I downloaded the zipped CS6 file on the desktop.  I want to burn the file zipped on a DVD-R DL (double layer).  The DVD disc will be kept as a backup/reinstall drive, and I'll also install the app from the DVD to a 2nd pc that will use the app...

  1. in case the zip file be burned as an inspection on the SPOT, or simply as a file?

  2. is there something special about burning a disc double layer?

  3 would be preferable to transfer the file compressed to 2nd pc and unpack or unzip of DVD to a folder on the hard drive?

  4. is there something special to watch the installation of CS6?

  Thank you.

  Hi [email protected],

  CS6 downloaded files contains 2 files and one with the "7z" extension and the other an executable '.exe '.

  The 7z file is a compressed file and the .exe file is an extractor used to extract compressed files and start the installation.

  You can copy the two files to a flash drive or burn it to DVD for archival purposes.

  In AR evous want to install it on a 2nd PC, copy the two files to the desktop, and then run the executable file (.exe) to start the installation.

  Make sure that you have adequate permissions or by using an administrator account during the installation of the suite CS6.

• Problems with palette layer with CS5 CS6 files

  Open the Illustrator CS5 files in CS6 causes visibility icons, the layer names and layer to disappear from the layers palette thumbnails. Objects are always there are layers and layers, but I am unable to identify them in the layers palette (see screenshot of panels layeers CS5 and CS6). Have tried to change the Options of the Panel. Have also tried to change the file names that it allows me to do, but disappear as soon as I leave the palette. Also tried paste into a new document with "paste remember layers" but they arive in the new document the same way. The only thing that seems to work is paste a layer at a time in a new document and naming at that time here. This also provides the thumbnail of the layer. This isn't an easy task, because I have thousands of files CS5 I'll need to work with.

  I'm on an iMAC with OS X 10.6.8

  

  

  http://forums.Adobe.com/message/4621171#4621171

• PS CS6 Files not opening and acting funny text

  In the last day, my copy of PS CS6 acted upward.

  First, when I started to go to change the text that was already there by clicking with the text tool, the text would be a change to the text of another layer. For example, if I went to change the text on the layer 3, it should be replaced by the text on another layer as the layer 1. And what kept with each text layer.

  Second, now PS opens all files for me. When I go to open a picture or a PSD file, I get a white screen where the document should be. I can see the layers in the layer panel and PS crashes but I can't see my files now.

  Any help would be greatly appreciated.

  Make sure also that your video card drivers are up to date by visiting the site of decision-makers gpu (graphics card) and not by windows update.

  If in the 64-bit version of photoshop cs6, you go in Edition > Preferences > Performance and uncheck GPU use and then restart photoshop cs6, it makes a difference?

• How to open the first first CS5.5 CS6 files

  Hi, I came across a problem I recently had the CS6 first test and had made plans on what I started in CS5.5, but now outdated test and a lot of my projects are stuck as CS6 files. Luckly I was able to put the trial on one of my older computers, so I can still access files for now, but its very slow and the rendering takes forever so I don't want to make all projects on this.

  I know that first is not compatible but it is anyway to export the file or convert it to a CS5.5? I need to export the project in the future, and my old computer doesn't have done here. I buy CS6 in a few weeks here, but right now, I can't afford. Any help would be greatly appreciated.

  Use original CS5.5 project files. You had to enter a new file name for CS6, so using the CS5.5 names it will solve under CS5.5. That does not solve the editing, you did, it is lost (except if you dare change the XML files).

• Cannot open Bridge CS6 file in PS CS6

  Bridge cs6, my files will open in Windows photo or Live Photo Gallery Viewer.  When I go to 'Open with' in the file menu PS CS6 is not an option.  I know it must be simple, but it's driving me crazy and I can't get my pictures to open in PS when I double click on one of my tens of thousands of photos.

  I just buy CS6 yesterday.  In addition, what I have to keep the Adobe CS6 file that is on my desk, or can I delete it now that the program is loaded?  He is 1.77 GB.  If I still need to reload PS, I can do it from the store on my account, right?  Even for the Adobe file that is on my desk for the LR4 download a few months previously.  Also, I left checked on 64 download and the regular PS PS6.  I have windows 7 I only need 64-bit.  Why is the other CS6 PS (no 64)?  Do I need?  Should I uninstall it?  Also, should I uninstall CS4 and CS5?  They're all still sitting there, with LR3 (I now use the LR4).  I have huge and several hard drives, so space is not a review.  But I just want to clean it up a bit.

  Lots of questions here, let's see what I can add.

  The problem of file goes to associations of type file/Preferences.  You should have the CS6 selected option to the default extension.  Can try first the option on the bottom button to set the default settings.

  If the 1.77 g you do file refers to is the one you downloaded and used for the installation you can delete.  It is a wise choice to save it to a DVD first so you'll get where you need it in the future.  Also record the serial number in place course.  Acutally safe isn't the right word, the need to put in place where you can find if you need next year.  HD may fail.

  There are still third party plug-ins that do not work in mode 64-bit, so the 32-bit version.  There is also no 64 no bits TWAIN so some like always to use for parsing.

  Some users experience file association and other problems with an uninstall of previous versions.  So, it is more prudent to let them be.

  If you want to clean up a little to resist the urge to move all Adobe programs once is installed.  It can really foul upward.

• Backward compatibility of the CS6 files

  I have Photoshop CS5 for Windows (version 12.1 x 32), and I am trying to open a CS6 file that was sent to me.  When I do, none of the text layers are editable.  Should it? Is it possible to fix it?

  They have used the public beta.

  PSD I record with the final show this:

  

  -Christmas