mounting of two HP LP2475w monitors for bi-ecrans support: always use instant trigger plates?

Similar Questions

• External monitor for a workflow in Premiere Pro 5.5 Windows HD

  I m looking in the Adobe forums for more information on the video preview HD from first to an external monitor and the only options I ve found, is that connect the camera or use SD via 1394.

  A few years ago I usually have a Matrox RT card. X 2 with junction box that had a 1440 x 1080 with output restrictions and then substituted much better performance with CUDA, Nvidia Quadro in CS5, but I lost the ability to see the content of the program screen in the external monitor.

  I guess it must be someone from sales of the cards for this purpose, I ve seen comments (AJA, Matrox, etc.), all seem to have a lot of problems, so I´d would like to know if someone has managed to join Quadro 4000 to another part of the hardware that runs on Windows

  Thank you

  If you have a monitor for editing, then you can use the second monitor connection on your video card to direct the second monitor.

  If you use a Setup dual monitor and need of previews on a third monitor, you can use one of the following options:

  1. a second video card that uses the same driver as your main video card.

  2. an option of third party such as the intensity of black magic or Matrox, but typically their drivers cause some problems.

  3. you limit to quality SD and feed the third monitor via firewire.

  4 forget MPE material and use an ATI Eyefinity card.

  nVidia cards can have three connectors on the back, but two can ONLY be active at the same time. This perspective option 1 is the least troublesome.

• Two virtual machines always "using network", while the rest of the cluster is "using SCSI hot add.

  The testing of VDR 1.2 in a cluster 4.1 with around 60 virtual servers.

  I have two Windows Server 2008 R2 VMs who is always using the network, with a full tank and after that all incremental backups.

  Nothing matches the conditions of the related knowledge base article and there are several other 2008 R2 servers deployed from the same template that uses SCSI hot add.

  The only thing that differs from the other virtual machines, it is that both are mailbox servers in a cluster, Exchange 2010 DAG.

  OLE Thomsen

  Check the block size for VMFS data store where the VDR-appliance is running. If the larger disk of your virtual machine is greater than the maximum file size of supportet on the VMFS where the VDR, VDR uses the network instead of add to hot. Move another VMFS-store data in big block with the VDR solves the problem in my environment. Also, in this case when the disk you lorsque le disque vous sauvegardez back up is a RAW device physikal mode, which should be ignored for VDR, VDR, but makes the network backup of the other disk of this virtual machine.

  Paul

• two monitors for HP Pavilion 500-007 a

  I am considering buying desktop HP Pavilion 500-007 a little time. I already have two monitors TeamViewer, two support DVI - I and VGA I'm running just one of the monitors on a HP Pavilion dv7 laptop (laptop current ongoing died after 3 years continuous use).  The current system gives me two monitors to view, computer laptop 17 '' monitor and the Samsung 24 "monitor. I have also a 19 '' Samsung monitor with the same characteristics as the 24 "monitor.

  I want to know if I can use both monitors Samsung on the new office at the same time with good results.

  Both monitors have no HDMI, only DVI - I and VGA connections.

  The new system, I would like to start the monitor 24 "using the DVI - I format and the same thing with a 19" monitor, but the specs of the 500-007 a give only 1 DVI-I have the graphics card or via a connection through HDMI, and then on the motherboard, it shows a VGA port.

  What is the best: run 24 '' via DVI - I and the 19 "via VGA or execution 24" via DVI - I and get a DVI - I to HDMI converstion and run two monitors to the graphics card, or alternatively the 24 "on DVI - I and 19" on VGA.

  I use photoshop for photo editing, as I do a lot of photography work. Videos etc are not a primary, or games, but as also older in order to use the 24 "to better on Visual acuity.

  Thanks Ailsa

  This is the original factory specifications for the desktop HP Pavilion 500-007 a. According to the specification, this model has an AMD Radeon HD 8570 discrete graphics card that supports the use of two simultaneous displays. That this computer is equipped with a discreet graphics card, the video ports on-board integrated are disabled. The AMD Radeon HD 8570 graphics card has a HDMI and DVI - I output and can take care of two digital monitors or a digital and an analog monitor. The supported formats are HDMI, DVI - D and VGA (via a dongle, DVI / VGA).

  Please provide the model number of monitors you want to use with this computer. Two additional DVI - D and VGA monitors as you have indicated, here are some of the possible combinations of connection supported;

  BEST

  Computer > DVI - D cable > monitor

  Technology > cable HDMI-DVI or adapter > monitor

  or

  GOOD

  Technology > cable HDMI-DVI or adapter > monitor

  Computer > adapter DVI / VGA > VGA cable > monitor

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Pavilion 020na-300 Mini PC: connect two monitors for HP Pavilion 020na-300 Mini PC

  What are the options to connect two monitors for HP Pavilion 020na-300 Mini PC?

  1. do I need 2 x HDMI monitors? A DP HDMI monitor to use with different socket or adapter as well?

  2. How can I connect the 2nd to the 300-020na Mini PC HP Pavilion?

  RSFSS, welcome to the forum.

  Here's a guide that should help you with your problem.

  RSFSS wrote:
  

  What are the options to connect two monitors for HP Pavilion 020na-300 Mini PC?

  1. do I need 2 x HDMI monitors? A DP HDMI monitor to use with different socket or adapter as well?  If you do not already have the monitors, I definitel would get both of them with HDMI connectors.  You will need a DP to HDMI connector:

  http://www.Amazon.com/GP/product/B004C9QST2?gclid=CJDQqtv1rsoCFZBcfgodha4DDQ

  2. How can I connect the 2nd to the 300-020na Mini PC HP Pavilion?  The Guide I've provided assistance with this procedure.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• How to tie two additional monitors for the new laptop Alienware 15 for the purpose of the game.

  So Im wondering how I'd go on the attachment of two additional monitors for the new laptop Alienware 15 for the purpose of the game. I hope no lag between the monitors. Is chaining possible? If it is still possible that would have my monitors need connections?

  Yes.

  Yes.

  N °

  N °

  If that's enough?

• HP Elitebook 840 G1: Newbie Question: how to set up two monitors for HP Elitebook and Ultraslim Dock

  I have therefore two monitors EliteDisplay E231 that I would use to set up a dual display screen. They have all two cables to VGA connection, but unfortunately the ultraslim dock has only a VGA port on the back. I tried to plug in the dock and the other to the computer itself, but that has not worked.

  How can I go on the establishment of a dual monitor set up? Is this possible?

  Hello

  You need only. The link above, it's in the box:

   

• Two monitors for InDesign?

  I'm afraid that this question is really here - but on a hradware site. However, since I want this for InDesign hopefully capture some experiences. Using Windows (XP64) and a Nvidea card I would like to add a second monitor for layout work. The Dell tech I talked to that assumed that I just wanted to extend my screen - IE distributed between the image a larger space. I had (and possibly a mute) idea that I would be able to have a full page Indesign on one screen length - so I could see what was going on in the text flow etc and have one view of the other closely so that I could edit and change. Would this work in InDesign or I am in the land of science fiction?

  Like this

  

• External monitor for the 13 mid-2014' rMBP

  Hello

  I'm looking for an external monitor for my rMBP mid-2014 13 "resembling a Retina display (I'm only looking for quality of retina monitors). Not extremely concerned about 4K because my Mac cannot run most 4K poster but of course wouldn't mind it if it can work properly. I have the model of i5 2.8 Ghz with Intel Iris 1536 MB.  Anyone have any suggestions?

  Hello ElEmirati,

  Thank you for using communities of Apple Support.

  I see that you are in the market for some external displays.  Your MacBook Pro (retina, 13 inches, mi 2014) can support the following resolution on an external monitor:

  • Dual display and copy video: support simultaneous native resolution on the built-in display and up to 2560 x 1600 pixels on up to two external displays, both at millions of colors

  MacBook Pro (13 inch, mid-2014 of the retina) - technical specifications

  Take care.

• Need for external monitor for Portege R500

  The screen on the R500 (PPR50E-01301TEN) is fine for a use for an hour or two on the go, but if I use it constantly throughout the day, I get a bad neck and headache (perhaps the angle that you have to look as far as its small size). So I want to get the external monitors for her at work and at home. Home preference would be an LCD TV.

  The problem is Windows tells me that the screen resolutions supported for the external monitor is 1280 x 768, 1920 x 1080 and 1920 x 1200. Linux wants to offer me 1280 x 800 or below, although I might be able to fix this with a little tweaking. Assuming that Windows is right, does anyone know of a 18-21 "wide screen monitor or a TV with one of the resolutions supported as its native resolution, or even a resolution supported? I can't find something.

  It should probably be 1920x1xxx, 1280 x 768 will be quite grainy close up on a 18 "+ monitor." Why aren't all common intermediate resolutions on the monitors (1440 x 900 or 1680 x 1050) supported? If he can do 1920x1xxx, he should be able to make them.

  As much as I know duplicator can not improve things. This external device just flow through the signal from the computer laptop itself.

  What resolution do you need for your monitor?

• New 27 "iMac / 5 can be used as a monitor for MacMini 2010 k?

  I'm interested in the iMac 27 "screen of 5K, but would need to use it as a monitor for a mid-2010 Mac Mini server as well. These two computers would serve in the same office, essentially for two different reasons, so I need to switch back once or twice a day. I don't want two screens on the same desktop.

  I knew the targeting mode screen does not work with the iMac 27 '' new. Is it possible to do what I have not discovered?

  Nope.

• External monitor for X 61-analog or digital

  
  

  Hello and welcome to the forums!

  The output on the X 6 ban is analog, but most sold monitors come with analog or digital - input some with both, others with one or the other. Your purchase of the monitor should not be limited to the connector type for the simple reason that there are connectors available conversion easily and cheaply, if necessary, convert the analog signal to a digital connection. So, this is really you, offers you can get on an external monitor to make a purchase of such.

  Then, there is no worry about running two monitors on the X 61. Use Vista or XP, you will be able to flawless use monitor or both. You can make the selection in the display properties (of no operating system). No additional software required to do this.

  Hope that helps

• [FlexRIO] Is it possible to define two modules e/s for my FlexRIO

  Hi all

  I developed an application to perform a test on a digital ASIC business and have a number of PXI chassis each with an installed FlexRIO. I have two flavors of DIO FAM the NI6581 & the OID NI6583. I want to write the code LV FPGA so that the application can use either FAM that it is mounted on the FlexRIO. Is it possible to set both FAMS IO in the LV FPGA project and the code detect what FAM is mounted and from there select the e/s to use?

  Thank you

  Nick

  Nick,

  While you could not define 2 FAMs under a single FPGA target in the project, you can do the following:

  1. create two targets FPGA, one for each Module IO

  2. write two screws FPGA separate, one for each Module IO

  3 compile the two bitfiles

  4. write a VI host that uses the host FlexRIO screw interface to check which adaptor module is attached.

  5. deploy the appropriate bitfile depending on which adapter module is attached.

  Keep in mind, we do not recommend the adaptation modules FlexRIO hot spare so that you wish to power your system every time you had to adapt modules.

  I hope this helps!

• I'm doing my laptop toshiba harman/kardon monitor for a desktop computer

  I am trying to use my PC harmon/kardon toshiba laptop as a monitor for my desktop PC friends for a few days.  My computor has vista on it.  I have a desktop cord plug to my laptop and connected to the computor office computer but just coming up as it always does exactly as it's not hanging but it is pluged on two ends and lit.  Please help thanks.

  Hello

  This isn't a problem of OS (Windows).

  Most laptops have an output to connect to a monitor outside to view the computer laptop outside introduced on a larger screen.

  They do not have a video input that may be connected to the video output on another computer.

  Jack MVP-networking. EZLAN.NET

• Impossible to get good resolution on external monitor for laptop

  I am struggling with this situation of resolution of external monitor for the past two weeks. Since the research I did, it is a very common question; However, I did find a solution. I tried all the solutions have not been successful. I hope someone here can help you.

  Asus K50IJ laptop

  Win 7 Home Premium 64 - Bit SP1

  Intel Core2Duo T6600

  4 GB OF RAM

  Mobile Intel 4 Series Express Chipset Family

  Monitor is Samsung SC750_S24C750P connected with VGA cable (laptop doesn't have a HDMI output)

  I reinstalled the drivers for the graphics card; current driver is 8.15.10.2302 of 11/02/2011

  I reinstalled the drivers for the monitor; current driver is 1.0.0.0 11 13, 2012

  Monitor is currently appearing as "HDMI" in the Device Manager; I have chosen "Analogue" and had the same results. Now & then I see "Generic PnP monitor" in the Device Manager. whenever I see it I uninstall it.

  Bottom line is this: settings keep bouncing everywhere. On rare occasions, I saw the picture I want on the external monitor; When I close the lid on my computer (that's why I bought the external monitor - so I can get a bigger picture, not two), the resolution is 1024 x 768. When I disconnect the external monitor, I get the correct image and ratio 16:9 (1366 x 768) on my laptop screen. When I connect the external monitor I have two choices for the resolution: 800 x 600 or 1024 x 768.

  I went to the Intel graphics properties tool and set a resolution to 1920 x 1080 at 60 Hz - 32 bit - proposed by Samsung for their monitor. Result 7 choices of resolution, no '' recommended '' and the higher tag 1366 x 768. I can live with 1280 x 720; When I choose this resolution or anything higher, the laptop screen is superb, but the image on the external monitor covers 1/4 of the screen - the rest is black. Reset the external monitor doesn't change anything.  Computer restarting does not help. Monitor disconnect/reconnect does not help. I tried this routine dozens of times.

  I really need to use the external monitor, and I need the image proportional. Is there a way to do this?

  Separated from: http://answers.Microsoft.com/en-us/Windows/Forum/windows_7-hardware/cant-get-right-resolution-on-external-monitor-for/f3680ff9-684c-428E-a6ac-74fe4171a845

  Hi, thanks for the response.

  I saw this on the Intel Web site so I tried mode extended without change.

  If I had 1366 x 768 on both screens, I would have been delighted - instead, I had two choices on my external monitor: 4:3, covering the entire screen with a distorted image, or 16:9 which covers about 40% of the screen.

  The most likely explanation I can think of is that the external monitor 4:3, I used in the past has left a kind of preference file in my computer which could not be changed, so he kept coming back to 4:3 instead of 16:9. I thought the problem might be the VGA - VGA cable, but this does not explain why I was unable to cover the entire screen on my external monitor with something other than a distorted picture.

  Using the past because I was forced to buy a new laptop. As soon as I plugged on the external monitor, everything was perfect.

  Thanks again for your help.