Mouse acceleration

Similar Questions

• Change of reactive sensibility the mouse acceleration

  As a person who likes to game, I hate the mouse acceleration. I disabled it with the command

  write default values. GlobalPreferences com.apple.mouse.scaling-1

  But the sensitivity is too low. If I change the sensitivity, acceleration of the mouse turns back the next time I connect.

  It's really annoying and some help would be really appreciated.

  Thanks in advance

  I tried to change the sensitivity via terminals, but same results

• How does windows determine when "disable acceleration in games" for control of the mouse?

  I have been using a program called Evernote.  I was faced with a problem with the mouse while using this program on several computers.  The problem is that the window of Evernote is active the mouse acceleration seems to stop working.  When I uncheck the box that says "disable acceleration in games" and then the mouse works normally with the acceleration settings that I chose.  It is as if Windows recognizes Evernote as a game and it is to disable acceleration as it is supposed to do... EverNote is not a game.

  The mouse that I use is a Logitech MX 500 and a MX510 and both use the Logitech mouseware... not the setpoint drivers.  Others with the setpoint drivers have noticed the same problem.

  My belief is that windows is disabling acceleration because I have the box ticked to turn off in games and for some reason any he applies this setting in Evernote.  I want to use acceleration outside the games then unchecking the box is NOT an option.  What determines when the parameter to "disable acceleration in games" is applied to the control of the mouse?

  It is a Windows problem, a Logitech problem or a problem of Evernote.  These more to Evernote sees no problem at their end, assuming that is correct that leaves Windows and Logitech.

  Once again, where to find?  What determines when the parameter to "disable acceleration in games" is applied to the control of the mouse?

  I have a post on the forum of Evernote, which is here:

  http://discussion.EverNote.com/topic/16513-Logitech-mouse-slows-down-with-active-EverNote-window/

  Hello

  You can uninstall the Logitech mouse software and let Windows install the drivers for the device and check if the problem still persists.

  To uninstall the Logitech software, you can see the article in the Microsoft Knowledge Base:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  I hope this helps.

• The mouse settings are reset if restart windows on Tecra

  For two weeks now, I have my tecra "nine". I'm an advanced windows user, so the first thing I, was setting display of the records and other things like the mouse settings. Here is a problem:

  When I change the speed of the mouse in the usual windows Setup window and I start my computer the next time, then the settings are canceled again.

  I am shure that this has something to do with toshiba / alp extended mouse settings tool. With this tool, you can define the speed of the mouse, but I'm already on the ceiling it and I also want to use the increased windows mouse acceleration. Also, this box is checked, whenever I start windows again.

  I already uninstalled easy Launcher from toshiba, but nothing has changed. So, I'm shure that it has something to do with the alp extended for the touch pad driver. Someone know any solution for this problem or will it soon be a driver available (debugged) updated?

  Luck & peace 4 all!
  Nathan

  And what model Tecra?

• 64-bit Windows 7 mouse freezes / stuttering several times per minute

  Found this post online by Googling my problem...

  I recently bought a beautiful Alienware gaming platform, running on Windows 7 64 bit. Also, I experienced problems with my mouse, as a first step, I took no notice, but after a few months, start/stop stuttering hiccupping became very annoying. In fact, never 5 to 10 minutes, my cursor will freeze for about half a second, 2 to 3 times in a row. This becomes especially noticeable when playing first person shooter.

  At first I thought it might be a problem with the mouse acceleration, so I've done everything I can to solve the problem. I use RAT 7 of the Mad Catz Cyborg, so I downloaded the software and drivers more recent and even ran an application published by Mad Catz which clears the mouse acceleration, but still the problem persisted.

  I tried everything...  I did all the updates of Windows at this point, my mouse/graphics card drivers are updated to the latest, I ran several scans for spyware, adware, viruses, registry, I tried 2 different mouse... and I always get these random hiccups freezes while browsing or playing games. I ran the DPC latency checker and there is clearly something affecting it (whenever there is a hiccup, the bar fly upward into the red zone), but I can't pinpoint the problem at all (went in the Device Manager, off and on almost every program, no change).

  It's a shame, but this problem with the mouse, it rolls. Anyone have any useful suggestions?

  Come on Microsoft, he meets!

  Hurez,

  Have you tried this mouse on another system? Also, have you tried the mouse in safe mode?

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 64-bit mouse pauses/freezes/stutters often accompanied by an event sound Windows

  Symptoms:

  Erratic mouse behavior. Mouse hanging, the gel for a full second or more, accompanied by a Windows event sound, generally. Sometimes, there is just a slight pause and no noise Windows event. Sometimes the mouse acceleration changes after freezing. Sometimes, more rarely, my mouse will be dropped by the operating system... the laser light on the underside turns off and I have to unplug the mouse and plug it in again so he can be recognized.

  What happens almost all the time. I want to use Windows mainly to play a game, World War II online: Battleground Europe. It is a shooting mmo first-person. This problem is annoying enough on the desktop. Unsuable for FPS games. I plan to have to file using Windows 7 64 bit for now.

  I have this problem as soon as Windows 7 64-bit.

  The problem with Windows 7 64 bit after trying many many solutions/solutions offered on the Internet.

  I did not need to determine what event could be linked to it in the event Log Viewer, or if it is even an event that is be connected here.

  NOTE: My mouse (G3) Logitech MX518 Gaming tips works fine, without any problems whatsoever, under Windows XP Professional SP3 32-bit with all latest updates or on Ubuntu 10.4 (Lucid Lynx) 64-bit. I never had no problem with this mouse at any time under these operating systems. These operating systems will run an intensive game if I want to, throughout the day.

  -----------------------------------------------------------------

  Steps in my last attempt to solve the problem.

  I was looking not all parameters of the BIOS at once at the beginning. For example, I have disabled "Intel Speedstep" to see if that would solve the question. Then restarted in BIOS and disabled the C1E function when I discovered that disabling Speedstep alone does not resolve the issue. ECT, ect...

  I have not installed Norton Internet Security 2010 for awhile while I tried various solutions of Workaround available and listed below in case this is the question. No difference, so NIS 2010 is now installed.

  Remember, that this behavior occurs that when Windows 7 64 bit is installed properly.

  (1) clean install of Windows 7 64-bit, for the third time now

  (2) installed the Runtime Visual C++ 2008 64 bit v9.0.30729.4148 than kb973552/KB969706 downloaded from--> http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=2051a0c1-c9b5-4b0a-a8f5-770a549fd78c

  (a) just in case Rebooted and then install the same version of the Visual C++ 2008 for 32-bit environment Runtime in Windows 7 64 bit

  (3) installed Windows 7 64 - bit drivers

  (a) Marvell Yukon 88E8056 Gigabit Ethernet on-board NIC Driver v11.24.5.3 (15/02/2010)

  (b) various software of Creative Labs creative Labs X - Fi Titanium 64-bit driver v2.17.0007 and all updates for them.

  (c) Software Driver of Intel Chipset v9.1.1.1025 (22/12/2009). Seems to just install an update from the hard disk of 64-bit driver.

  (d) ATI Catalyst 10.3 Driver

  (4) installed Windows updates

  NOTE: I have not installed the latest four updates for now, three of them are security updates have a publication Date: 09/02/2010. I decided to not install these due to a mistake of "Circular kernel context logger" that I already saw in the viewer of the event log, recorded by "Microsoft-Windows-Kernel-EventTracing" event ID: 2 now, I'm not having this issue.

  NOTE: I also installed a driver in option, the ACPI ATK110 driver, which installs the following file--> C:\Windows\System32\drivers\ASACPI.sys - he has listed as the version of the file 1043.2.15.37 and dated 29/03/2005. In a previous installation of Windows 7 64 bit, I downloaded an update of the present of Asus contained in a file/AMDCoolnQuiet_Utility_V21801_XPVistaWin7.zip utility and installed. I started the utility and he gave me the message that my system was not supported by "Asus Cool ' n Quiet. It's ASACPI.sys file was dated some time in 2009, rather than in 2005. Since my last Windows 7 install, I have currently a bit the 2005 version proposed by Windows Update installed. I don't know if this file is to load or used by Windows 7 64 bit. But I wonder...

  Is this a problem?

  (5) installed software v6.00.68 Logitech Setpoint (Version 4.90.80 driver) for Windows 7 64-bit

  NOTE: I have not installed this in previous installations of 64-bit Windows 7 and had hoped that this would cure the problem. No change, the problem still persists.

  (6) went into the BIOS and reset to the default settings

  (7) BIOS: Set A.I. OC (overlcock) to "Manual" and left to deafult values so that the CPU isn't overclocked automatically or manually sort

  (8) BIOS: Establish timimgs settings memory, memory voltage and the voltage Northbridge, according to my memory (memory Mushkin) manufacturer's recommendations

  NOTE: Again, I didn't have never had any problem at all in Windows XP Pro 32 bit SP3 or Ubuntu 10.4 64 bit with these settings. These operating systems will run an intensive game if I want to, throughout the day.

  (9) BIOS: The value of Intel Speedstep "Disabled".

  (10) BIOS: C1E (Enhanced Halt State) value to "disabled".

  (11) BIOS: Set the Mode of the ACPI Power / Suspend 'S3' only '

  (12) BIOS: Set ACPI 2.0 Support to 'Active '.

  NOTE: On, off, on any settings/functions above not has not solved the problem. I have I have not tried all the single 'combination', but in any case, make no change with the mouse.

  (13) in Windows 7, I selected the Option to 'High Performance' and the value "USB selective suspend setting" to "Disabled" with updated BIOS options as shown in steps 9 to 12 above

  NOTE: With BIOS defined that way there is no setting "Processor Power Management" in the Options of food, other than the 'political cooling system' (active/passive).

  I left this game to 'Active '.

  Is this a problem?

  (14) tried monitoring DPC latency with the download link for the "DPC latency Checker" utility No visible ears in the utility during the mouse freezes / breaks

  -----------------------------------------------------------------

  System Specs:

  (1) Intel Core2Duo E8600 (3.33 GHz, 6 MB L2, Stepping E0, CPU Cache not OC had) on Asus P5Q Deluxe (Intel P45 Chipset + ICH10R Southbridge) with BIOS 2301
  (2) Zlaman CNPS9700 LED 110 mm thermal heatsink / CPU fan
  (3) Thermaltake W0116RU 750W modular POWER supply
  (4) Mushkin 4 GB (2 x 2 GB) DDR2 1066 (PC2-8500) RAM in Dual-Channel mode (value 5-5-15-2T timings and various other such defined memory recommended by Thierry timings.) Voltage of the memory the value 2.02v and Northbridge as recommended by Mushkin value 1.32v in the BIOS. I have never had any problem in Windows XP 32 - bit or Ubuntu 10.4 64-bit)
  (5) driver software Intel Chipset v9.1.1.1025 (22/12/2009)
  6) HIS (ATI) HD 512 MB 4850 with IceQ4 cooler with Catalyst 10.3 driver
  (7) creative SB X - Fi Titanium with driver v2.17.0007
  (8) Marvell Yukon 88E8056 Gigabit Ethernet NIC onboard with driver v11.24.5.3 (15/02/2010)
  (9) Unicomp Tactile Feedback(non-mushy, clickity-clack) USB wired keyboard
  (10) Logitech (G3) Gaming MX518 Wired Optical mouse with the Logitech Setpoint software (Version 4.90.80 driver) v6.00.68 for Windows 7 64-bit
  11) MultiSync Samsung 214 t 21 "screen LCD Digital (1600 x 1200 native res)
  (12) Microsoft Sidewinder Forcefeedback 2 USB Joystick
  (13) western Digital 500 GB GB w/16 MB Cache SRTL disk HARD 7200 RPM Sata 3.0 GB / s
  (14) v9.28.1886 DirectX Redistributable (February 2010)
  (15) cooler Master Cosmos 1000 Full-Tower Case
  (16) Norton Internet Security 2010 (firewall and anti-virus)
  (17) Internet Connection Comcast 1.5 MB/s cable
  (18) Windows 7 64 bit ultimate
  19) Ubuntu 10.4 (Lucid Lynx) 64-bit

  Hello again,

  Can I have found the solution that worked for me. It is probably too early to tell, I'll need more time to be sure. But in case he solved the problem for me, I'll post what seems to have worked as suggested on a post, I came across from another forum. Consider a guy who tried many suggestions, maybe that's the answer. Heck, I had tried a few other things that I have said in my original post. But in any case, so far, my system and mouse seem to work very well on the desktop for the last hour and a half. I have not tried yet game.

  (1) uninstall the Windows Update KB977074 (January 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2).

  (2) reboot and leave your system for a couple / few minutes after the restart.

  (3) just in case... Restart again, and then reinstall the KB977074.

  (4) restart to complete the installation.

  January 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2 info and the download link-->

  http://support.Microsoft.com/kb/977074

  Best regards and good luck,

  OneTinSoldier

• iMac (27 inch, 5 retina k, end of 2015) startup problem

  I am currently using late 2015 5 k retina 27-inch iMac.

  My iMac doesn't always dΘmarre as expected. There will be a start-up chime, but the screen just remains completely black. It takes sometimes more than 5 minutes to start magically after freezing to the black screen. And when I managed to connect, my mouse (USB) could freeze a few times. I downloaded Smoothmouse to kill the mouse acceleration.

  I tried to reset the SMC and the NVRAM, however it does not seem to solve the problem. I have faced this same problem after exchanging the 3 sets of iMac.

  Wondering if a defective mouse could be the cause of this problem? Or could it be the Smoothmouse. However, I still don't think that an iMac could be so vulnerable.

  Any help would be greatly appreciated! Thank you!

  I don't know if you're aware or not, but you have 90 days of free telephone support AppleCare. You should be in contact with Apple immediately. You can learn more about it by clicking One AppleCare Support

• EVGA Precision profile backup

  Wel what EVGA Precision I use for my nvidia gtx 680 and I want to ask how to save profile? There are number 1 to 10, I get down to click on them to save the profile, but it did not work I mean when I put (TARGET power) 100 to 130% or maybe 110% and i and (LAG of CLOCK GPU) (MEM clock offset) and 100-100 and save my profile on 1 and when I create any other profile profile 2 and do the same as the first thing a second 150 + a 150 and a third + 200 and save profile 2 so my two profiles are now saved... then when I click on my profile 1 my TARGET POWE automatically saved on 150% but I saved my target of POWER in profile 1 to 130% not 150% is in profile 2 150%? so I can't save my POWER TARGET? anyone can help and can u give me a detail on how to save the profile correctly?
  one more thing, how many fps do I need for oucnter strike 1.6 coz my strike cs too smooth running, I can't focus on the player his patients as... problem with my mouse aim just as the rest is good? so I want to run my cs 1.6 on the lower graph with the help of EVGA Precision may be it will work fine then?
  Sorry for my bad English
  Tank you?

  What mouse do you use? Is there software that you can the mouse
  create profiles of mouse speed in?
  The mouse works well with other games?
  If you are wanting to play CS with an old MS Intelli mouse like the pros
  You should visit the forums dedicated to CS for more details.

  "It's work, but still relatively smooth.
  I'm not really sure what you mean. I guess that your cursor movement
  is too fast. It's the first time I saw the orders that you show, but--

  -noforcemaccel - this should clear the acceleration mouse but apparently - noforcemspd - makes the game go back to the desktop mouse speed.
  So, if you use the acceleration mouse with your configuration of office mouse the
  second command can substitute for the first.
  Similarly, if your desktop mouse speed is higher than what you want the
  game it can substitute at the speed that you set in the game.
  The use of commands like this requires a little experimentation. Perhaps using
  noforcemaccel after noforcemspd may work better.

  Mouse acceleration is good when in Windows but not
  so good when playing first person shooter because the movement of the cursor
  It accelerates when you move the mouse quickly.

  If you do not use an old MS Intelli mouse or other mouse without contouring
  software, and like us, players not pro, use a mouse with buttons that can
  Select the different speeds while playing and has a program with parameters that can
  substitute the Windows settings, then you should be able to make a profile when you play CS has no enabled mouse acceleration.
  The mouse software then automatically to this profile when you launch CS.
  For example, I have a profile for Battlefield Bad Co with three different speed settings that I can change during the game. One is very slow (like the pros) for a specific purpose, the second is a little more quickly to run
  but still slow enough to be precise, and the third is very fast, so I can turn the turret tank quickly when you're driving a tank. Also, the mouse acceleration is disabled,
  but my normative office has enabled mouse acceleration.

  If when you say 'little smooth' you mean that it is too slow or lagging while there may be another problem. You might have a speck of dust on the lens on the bottom of the mouse. Tasks of dirt on your mouse pad can also cause shift when the mouse passes over them.
  Software conflicts can cause lag as well.  Sometimes the lag can be cause of too
  higher settings of Anti-aliasing in a game, but that is questionable in you situation that the
  GTX680 should have no problem at all with the settings CS running up.
  .

• Speed of the mouse in the Sierra

  Since installing beta Sierra (5) and now the GM, scrolling of the magic mouse and trackpad are accelerated to an unusable level on some applications.

  I noticed with VLC (volume control) and Minecraft (Browse items).

  I've adjusted down to the lowest speed in the "Accessibility" section in system preferences.

  I don't really use other applications is unusual as he posed questions with two independent applications. It doesn't seem to be a problem in the MacOS (i.e. scrolling in Safari is very good as it's Chrome - but they are windows that may be different.)

  Do others see this problem?

  It is a question of MacOS or something that the developers of applications need to solve?

  TIA

  Glenn.

  Discuss the beta software in Apple Support communities

  You have accepted a confidentiality agreement upon registering for the beta program:

  CUSTOMER AGREEMENT SEEDS AND CONFIDENTIALITY

  Please read the e-mail you received: Software Apple beta program

  The NDA forbids you to discuss beta software issues here or anywhere else. The above two documents describe how to submit problem reports to Apple.

• Thunderbird installed 38 & now the PC freezes. No response from mouse & KB. What should do? How knowledge is there a w/o e-mail response?

  As explained in the summary...

  Version of Thunderbird installed 38 last night. This morning I have urgent questions on the email.

  I open Thunderbird and before it finishes downloading the mails from the server, and sometimes even before the end of the authentication password for the accounts, if freezes. I restarted three times with zero improvement. Mouse and KB are both unresponsive while the LED mouse works when the mouse moves and indicators CAPS etc meet key activities respective, so devices are working on their own, but Mozilla Thunderbird blocks the communication between them and the PC.

  Now, I don't have access to email and no way to know when there is an answer to this! Nice!

  What exactly is necessary to make Thunderbird work? And how can I find out about it without any email?

  I use Windows 7 on a PC. I use Firefox and Open Office, no other product from Ms.

  PS: I have an account already, but you do not provide a way to recover passwords, so that's my account 02!

  Try turning off hardware acceleration.
  Tools (Alt - T) - Options - Advanced - general tab
  Uncheck the "use hardware acceleration".

  What is your anti-virus software?

  THREE calls to your London Office

  Mozilla does not support. This forum is the official place to support Thunderbird. Most of the people here are volunteers devoting their time to help other users.

• Mouse button open Central closed recent tab, new tab as not always

  As in the subject, all the time until recent days click the middle button on the tabs Panel, always made opening new tab, recently changed it by opening the last closed tab. It's a huge frustration for me, a way to solve this problem?
  Please remember that it's on by clicking the middle button of the mouse on the tabs Panel, not a hyperlink.

  Works for me in Firefox 38.

  The Firefox window is maximized?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Except if it is started in safe mode, Firefox is very slow; keyboard, mouse, etc.

  When you start Firefox normally the keyboard and mouse input is very slow. The videos are restless with her interruption. Scrolling is almost impossible. When you start in safe mode, Firefox works fine. Internet Explorer works well as Thunderbird. Have
  tried to update Firefox and disabling modules.

  Hello Paulkh, please disable graphics hardware acceleration.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options tab as follows, click on the menu button

     

     and select ' Options.
     

  2. In the Options of Firefox tab, click the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Uncheck this box.
  4. Now restart Firefox and see if the problems persist.

  This solve your problems? Please report to us!

  Thank you.

• Scroll with mouse wheel requires several "ticks" to start scrolling

  I recently got a new mouse, and now when you use firefox the scroll wheel doesn't work properly. Everywhere else, I can do simple ticks of scrolling to scroll the content, but in firefox a graduation scroll is simply ignored as are several ticks if a little slow. In order to get firefox to actually scroll with the mouse wheel, I quickly make a few ticks at the same time. This makes for very imprecise control.

  I tried to turn off smooth scrolling, hardware acceleration and pixel scrolling, but none of these permits. Any help for firefox to stop ignoring ticks of slow and unique scrolling would be greatly appreciated.

  Well, after some searching around, I found that reported on a different logitech mouse and it ends up being the setpoint for firefox extension. I turned that off and scroll began to work properly in firefox.

• Must move the mouse to display any video and some actions (update). My office windows 7 + FF v35.0

  My system had this problem going back months or years. Read the other threads which were old/treated with previous versions of FF.

  The problem of mouse movement occurs on my system viewing any video. She is also apparent in certain actions such as selecting Refresh or other actions on the page. Unless / until you move the mouse from the action of progress that appears in the tab there is a delay/no action unless / until the mouse is moved.

  Here is information system.

  The application databases

  Name: Firefox
  Version: 35.0
  User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; RV:35.0) Gecko/20100101 Firefox/35.0
  Windows multiprocessing: 0/1

  Reports of incidents for the last 3 days

  All accident reports (including 1 crash waiting in the given time interval)

  Extensions

  Name: Skype Click-to-Call
  Version: 7.3.16540.9015
  Enabled: true
  ID: {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}

  Name: HP Smart Web Printing
  Version: 4.5
  Enabled: false
  ID: [email protected]

  Name: McAfee SiteAdvisor
  Version: 3.7.1
  Enabled: false
  ID: {4ED1F68A-5463-4931-9384-8FFF5ED91D92}

  Name: Microsoft .NET Framework Assistant
  Version: 0.0.0
  Enabled: false
  ID: {20a82645-c095-46ed-80e3-08825760534b}

  Name: My research on the Web
  Version: 1.1
  Enabled: false
  ID: [email protected]

  Graphics

  Description of the adapter: AMD Radeon HD 5700 Series
  Drivers: aticfx64 aticfx64 aticfx64 aticfx32 aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64
  RAM card: 1024
  Device ID: 0x68b8
  Direct2D Enabled: true
  DirectWrite Enabled: true (6.2.9200.16571)
  Driver date: 06/12/2013
  Driver version: 13.251.0.0
  GPU #2 Active: false
  GPU accelerated Windows: 1/1 Direct3D 11 (OMTC)
  SubSys ID: 29911682
  Vendor ID: 0 x 1002
  WebGL Renderer: Google Inc. - ANGLE (AMD Radeon HD 5700 series Direct3D9Ex vs_3_0 ps_3_0)
  windowLayerManagerRemote: true
  AzureCanvasBackend: direct2d
  AzureContentBackend: direct2d
  AzureFallbackCanvasBackend: Cairo
  AzureSkiaAccelerated: 0

  Important change preferences

  accessibility.typeaheadfind.flashBar: 0
  Browser.cache.Disk.Capacity: 358400
  Browser.cache.Disk.smart_size_cached_value: 358400
  Browser.cache.Disk.smart_size.first_run: false
  Browser.cache.Disk.smart_size.use_old_max: false
  Browser.cache.frecency_experiment: 3
  browser.places.smartBookmarksVersion: 7
  Browser.Search.Param.yahoo - fr: w3i & type = W3i_DS, 157, 0_0, search, 0, 0, 20150103, 102, 20030
  Browser.sessionstore.Enabled: true
  browser.sessionstore.upgradeBackup.latestBuildID: 20150108202552
  Browser.Startup.homepage: http://www.nbcnews.com/
  Browser.Startup.homepage_override.buildid: 20150108202552
  Browser.Startup.homepage_override.mstone: 35.0
  dom.mozApps.used: true
  extensions.lastAppVersion: 35.0
  GFX. Direct3D.last_used_feature_level_idx: 0
  keyword. URL: http://www.bing.com/search?FORM=UP97DF & PC = UP97 & q =
  Media.GMP - gmpopenh264.lastUpdate: 1413684497
  Media.GMP - gmpopenh264.version: 1.1
  Media.GMP - manager .lastCheck: 1421469125
  network.cookie.prefsMigrated: true
  places.database.lastMaintenance: 1421561586
  places. History.expiration.transient_current_max_pages: 104858
  plugin.disable_full_page_plugin_for_types: application/pdf
  plugin.importedState: true
  Print.printer_Fax.print_bgcolor: false
  Print.printer_Fax.print_bgimages: false
  Print.printer_Fax.print_colorspace:
  Print.printer_Fax.print_command:
  Print.printer_Fax.print_downloadfonts: false
  Print.printer_Fax.print_duplex: 307603184
  Print.printer_Fax.print_edge_bottom: 0
  Print.printer_Fax.print_edge_left: 0
  Print.printer_Fax.print_edge_right: 0
  Print.printer_Fax.print_edge_top: 0
  Print.printer_Fax.print_evenpages: true
  Print.printer_Fax.print_footercenter:
  Print.printer_Fax.print_footerleft: & PT
  Print.printer_Fax.print_footerright: & D
  Print.printer_Fax.print_headercenter:
  Print.printer_Fax.print_headerleft: & T
  Print.printer_Fax.print_headerright: & U
  Print.printer_Fax.print_in_color: true
  Print.printer_Fax.print_margin_bottom: 0.5
  Print.printer_Fax.print_margin_left: 0.5
  Print.printer_Fax.print_margin_right: 0.5
  Print.printer_Fax.print_margin_top: 0.5
  Print.printer_Fax.print_oddpages: true
  Print.printer_Fax.print_orientation: 0
  Print.printer_Fax.print_page_delay: 50
  Print.printer_Fax.print_paper_data: 1
  Print.printer_Fax.print_paper_height: 11 h 00
  Print.printer_Fax.print_paper_name:
  Print.printer_Fax.print_paper_size_type: 0
  Print.printer_Fax.print_paper_size_unit: 0
  Print.printer_Fax.print_paper_width: 8.50
  Print.printer_Fax.print_plex_name:
  Print.printer_Fax.print_resolution: 375594512
  Print.printer_Fax.print_resolution_name:
  Print.printer_Fax.print_reversed: false
  Print.printer_Fax.print_scaling: 1.00
  Print.printer_Fax.print_shrink_to_fit: true
  Print.printer_Fax.print_to_file: false
  Print.printer_Fax.print_unwriteable_margin_bottom: 0
  Print.printer_Fax.print_unwriteable_margin_left: 0
  Print.printer_Fax.print_unwriteable_margin_right: 0
  Print.printer_Fax.print_unwriteable_margin_top: 0
  Print.printer_HP_Photosmart_C309a_series.print_bgcolor: false
  Print.printer_HP_Photosmart_C309a_series.print_bgimages: false
  Print.printer_HP_Photosmart_C309a_series.print_colorspace:
  Print.printer_HP_Photosmart_C309a_series.print_command:
  Print.printer_HP_Photosmart_C309a_series.print_downloadfonts: false
  Print.printer_HP_Photosmart_C309a_series.print_duplex: 307603184
  Print.printer_HP_Photosmart_C309a_series.print_edge_bottom: 0
  Print.printer_HP_Photosmart_C309a_series.print_edge_left: 0
  Print.printer_HP_Photosmart_C309a_series.print_edge_right: 0
  Print.printer_HP_Photosmart_C309a_series.print_edge_top: 0
  Print.printer_HP_Photosmart_C309a_series.print_evenpages: true
  Print.printer_HP_Photosmart_C309a_series.print_footercenter:
  Print.printer_HP_Photosmart_C309a_series.print_footerleft: & PT
  Print.printer_HP_Photosmart_C309a_series.print_footerright: & D
  Print.printer_HP_Photosmart_C309a_series.print_headercenter:
  Print.printer_HP_Photosmart_C309a_series.print_headerleft: & T
  Print.printer_HP_Photosmart_C309a_series.print_headerright: & U
  Print.printer_HP_Photosmart_C309a_series.print_in_color: true
  Print.printer_HP_Photosmart_C309a_series.print_margin_bottom: 0.5
  Print.printer_HP_Photosmart_C309a_series.print_margin_left: 0.5
  Print.printer_HP_Photosmart_C309a_series.print_margin_right: 0.5
  Print.printer_HP_Photosmart_C309a_series.print_margin_top: 0.5
  Print.printer_HP_Photosmart_C309a_series.print_oddpages: true
  Print.printer_HP_Photosmart_C309a_series.print_orientation: 0
  Print.printer_HP_Photosmart_C309a_series.print_page_delay: 50
  Print.printer_HP_Photosmart_C309a_series.print_paper_data: 1
  Print.printer_HP_Photosmart_C309a_series.print_paper_height: 11 h 00
  Print.printer_HP_Photosmart_C309a_series.print_paper_name:
  Print.printer_HP_Photosmart_C309a_series.print_paper_size_type: 0
  Print.printer_HP_Photosmart_C309a_series.print_paper_size_unit: 0
  Print.printer_HP_Photosmart_C309a_series.print_paper_width: 8.50
  Print.printer_HP_Photosmart_C309a_series.print_plex_name:
  Print.printer_HP_Photosmart_C309a_series.print_resolution: 375594512
  Print.printer_HP_Photosmart_C309a_series.print_resolution_name:
  Print.printer_HP_Photosmart_C309a_series.print_reversed: false
  Print.printer_HP_Photosmart_C309a_series.print_scaling: 1.00
  Print.printer_HP_Photosmart_C309a_series.print_shrink_to_fit: true
  Print.printer_HP_Photosmart_C309a_series.print_to_file: false
  Print.printer_HP_Photosmart_C309a_series.print_unwriteable_margin_bottom: 0
  Print.printer_HP_Photosmart_C309a_series.print_unwriteable_margin_left: 0
  Print.printer_HP_Photosmart_C309a_series.print_unwriteable_margin_right: 0
  Print.printer_HP_Photosmart_C309a_series.print_unwriteable_margin_top: 0
  privacy.cpd.offlineApps: true
  privacy.cpd.siteSettings: true
  privacy.sanitize.migrateFx3Prefs: true
  Storage.vacuum.Last.index: 1
  Storage.vacuum.Last.places.sqlite: 1420315799

  User.js preference

  Your profile folder contains a user.js file, which includes preferences that are not created by Firefox.

  Important preferences locked

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: false
  Prevent accessibility: 0

  Versions of the library

  NSPR
  The expected minimum version: 4.10.7
  Version: 4.10.7

  NSS
  The expected minimum version: 3.17.2 based ECC
  Version: 3.17.2 based ECC

  NSSSMIME
  The expected minimum version: 3.17.2 based ECC
  Version: 3.17.2 based ECC

  NSSSSL
  The expected minimum version: 3.17.2 based ECC
  Version: 3.17.2 based ECC

  NSSUTIL
  The expected minimum version: 3.17.2
  Version: 3.17.2

  Experimental features

  I'm just judging from the symptoms it could be adware/malware associates. This is because many users with the same problem has pointed out that it was the case before:
  https://support.Mozilla.org/en-us/questions/1018259#answer-625817
  https://support.Mozilla.org/en-us/questions/1019045#answer-628351
  https://support.Mozilla.org/en-us/questions/1026745#answer-643556
  https://support.Mozilla.org/en-us/questions/1028006#answer-655315
  https://support.Mozilla.org/en-us/questions/1028419#answer-647430
  https://support.Mozilla.org/en-us/questions/1030147#answer-654859
  https://support.Mozilla.org/en-us/questions/1031896#answer-655233

  also even if you have an existing security solution I would recommend a scan with malwarebytes & adwcleaner, from suppliers such as mcafee are often not good for detect adware minor and potentially unwanted programs that could not be considered a virus. They are tools of good reputation and get also recommended in the article knowledge base of mozilla on removing malware: troubleshoot Firefox problems caused by malicious software

• The screen freezes when the mouse does not move

  Hi, I have always used Mozilla Firefox and loved it, but in recent weeks it drives me crazy. Whenever I load a Web page and I move the mouse it freezes just until I move the mouse again. If I load the page even off the coast of internet Explorer it loads immediately without moving or touching anything. I'm on the current version of 34.0 beta version update channel. I tried to use an earlier version and the same problem is there. I really want to use Firefox, but it is at the stage I want to if I have to be sitting at the computer by moving the mouse to load each page that I need. Can someone help me please.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware