The mouse settings are reset if restart windows on Tecra

Similar Questions

• Pavilion: the mouse settings not saved upon restart

  Just bought a brand new HP Pavilion with windows 10 for £400. I'm about to return to the store unless someone can help me solve the reason for which the mouse for the touchpad settings will not save after reboot. Help, please.

  @C17

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Try to change the mouse settings in Control Panel, receive the error "windows rundll.exe host has stopped working".

  When I go into the control panel to change my settings for the mouse, I get the error "windows rundll.exe host has stopped working", therefore, you cannot change the mouse settings, how do I fix it?  My mouse is out of control! :)

  * original title - why windows will not host rundll.exe I would change my settings of the mouse? *

  Hello

  If you use 3rd party mouse drivers updated or reinstall those who, like Logitech, Microsoft
  Wireless and so on.

  =================================================================

  To solve the problems:

  If your: Windows host process Rundll32 has stopped working
  http://www.WinVistaClub.com/T40.html

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right
  Click on taskbar - task manager - take a look at stored by - Services - process -.
  It's a quick reference (if you have a small box left - show for all users, then
  Check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG then after a
  a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Objects of process Explorer - free - find out what files, registry keys and other processes
  have open, which DLLs they have loaded and more. This exceptionally effective utility will be
  even show you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not.
  The window Watcher says it all, every window created by all programs that are running, the statement
  If the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

• Windows installation encountered an unexpected error. Check that the installation sources are accessible and restart the installation. "The error code is:"0xE0000 100. "

  My antivirus and windows firewall was also automatically disabled and I was not able tun back on

  So, I tried to reinstall the windows operating system 7, but when I try to install, I get an error saying:

  Windows installation encountered an unexpected error. Check that the installation sources are accessible and restart the installation. »

  The error code is: "0xE0000 100."

  I think that some virus or malware is rampant in my installation of windows system. So, I want to know there is a way to solve this problem...

  Ideas or suggestions that anyone has would be greatly appreciated!

  Thank you!

  See if this post has resolved your problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/error-code-oxe000100-windows-installation/aea498e2-09c3-43aa-bfa5-c06e68b1ea0c

  J W Stuart: http://www.pagestart.com

• The mouse buttons are not switched

  Whenever I restart my computer I have to reset the default right back to my left hand favorite mouse buttons.  This has happened after that I upgraded my mouse driver.  Revert to a previous version did not remove the problem.

  Schoonerman salvation,

  · Who is the manufacturer of the mouse you are using?

  · Is there any type of installed software that came with the mouse?

  Sometimes software and windows will be conflict and this automatically resets the settings of Windows after restart.

  Do the steps below should allow you to keep all the settings in the SetPoint software at the same time to solve your problem.

  a. Click Start, type msconfig in the Run dialog box and press ENTER.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. in the System Configuration dialog box, click the Startup tab

  d. look for all named KHALMNPR entries or similar and uncheck the box next to them (there may only be a)

  e. click OK and restart your computer

  f. after the restart, change the speed of your mouse pointer and reboot

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to see the monitor

  When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to be able to see the screen.  I tried all turned on and on the screen but when I do it says monitor going to sleep

  I assume you are using a desktop computer you are referring to the monitor going to sleep rather than the course of PC to sleep.

  1 check the monitor power management & the display adapter in Control Panel, Manager of peripheral and during that control you the mouse power management and make sure that it is likely to be used for anything wake up.

  2 in case of failure, then check the monitor & display settings of the adapter to control panel, display.

  3 check manual site or the monitor stand, so the settings recommended.

  4 then check the settings of the Control Panel, power options, change plan settings change advanced power settings.  In particular, if it is a USB mouse, you may disable settings settings USB, USB selective suspend setting.

• The mouse pointer is not displayed in Windows 8.

  original title: 8 the mouse pointer disappears NOT associated with the applications screen

  Windows 8 64-bit running on TORDRE of Lenovo tablet 3347CTO with external monitors.

  Sometimes, the mouse pointer disappears from the office.  He is always there, because I can find it by pressing CTRL (I have "use CTRL to locate mice" clicked to fix somewhere).  It will activate a program if the invisible pointer is on the icon for this program.  It reappears when you move, but only when moving.  I'm going behind the screen applications (starting) to do this. As I know it has nothing to do with any specific program.  Only way to recover is to restart the computer.  It's extremely annoying, any suggestions would be most appreciated.

  I fell right on the problem.

  Use the Windows key + P to pass between the double screen and return to the single screen mode and returns the pointer.

  Play with the mouse settings did not help.  I think it's a problem of display driver.

  Hope this helps others.

• cannot open the mouse settings in the control panel after the update

  Ideate:

  • Program som har problem med
  • Felmeddelanden
  • Latest changes to the din dator gjort
  • The redan har forsokt att atgarda problemet VAD

  KOM Ihag - Det har ett offentligt forum sa aldrig skicka privat information såsom ar epost eller telephone!

  Hi image,

  Welcome to the Microsoft Answers community.

  a. what exactly happens when you try to open the mouse settings in the control panel?

  b. do you receive any error messages?

  I suggest that you want to run System Restore on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• personal settings not retained after restarting Windows XP

  After that my professional trustworthy repaired my system and reinstalled Windows XP Pro (SP3), it was OK until I started to reload security applications (such as the ZoneAlarm firewall, blockers of spies, etc.)
  Now, whenever the system reboots, all personal settings are lost (even though Windows says ' save settings' then stop).  Keyboard settings, folder view settings, icon placement, etc. - all is lost.
  I searched the Knowledge Base and Forums, with no obviously related results.

  Help?

  Try disabling TeaTimer first. It will certainly impact the registry change. If this does not work, uninstall.

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my desktop icons have turned all of a sudden really big, but the display settings are still normal?

  my desktop icons have turned all of a sudden really big, but the display settings are still normal? is there something more, what can I do?

  Displaying the desktop, hold down the CTRL key and rotate the mouse wheel to adjust the size.

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• The files that are required to run Windows XP Professional have been replaced by unrecognized versions

  My files have been replaced by unreconized windows versions must resote the orginial version, they want insert me my cd have not... Professor of Windows service Pack 3

  The files that are required to run windows xp profecinal have been replaced by windows versions unreconized must restore these files insery your SP3 orginial version now... I do not have a CD and never no computer came already quiped.

  Hello

  You can check the link that contains the same information: Description of the Windows File Protection feature: http://support.microsoft.com/kb/222193

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

• Stop the mouse pointer to show more of Windows Media Center

  Original title: Windows Media Center

  Hello

  Is there a way to stop the mouse pointer to show more of Windows Media Center, other than moving it?

  I note that adobe flash player can do it in a web page, then why not an 'entire' application such as Windows Media Center?

  Thank you

  Hi hiphoppoprock,

  In Windows Mode, the pointer in Windows Media center is designed to be displayed.

  In order to have the pointer automatically disappear you need to change the Mode full screen.

  You can see the Feedback forum to leave a comment or suggestion about the present:

  https://connect.Microsoft.com/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Command BACK to find the MAC address of the computers that are connected with any windows Server

  Y at - it a DOS command to find the MAC address of the computers that are connected with any windows Server

  Usually, net view command is used to display computers on a particular network.

  To find the MAC address, it is best to ask the question here:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Cannot find the Touchpad settings to allow scrolling. Touchpad are not not as a device under the mouse settings. Help.

  I usually use a USB mouse, as it is easier for me than a touchpad, but mine a. kaput! So, now I'm trying to use my touchpad and I can't scroll. It has arrows on the right side and it used to make scroll... but now it doesn't. I do not remember turning this setting OFF... but when I try to see if there is a setting I can change I can not even find the Touchpad as a device. When I go into the properties of the mouse, I get a message "unable to connect to the Synaptics pointing device driver. I thought you could say that because I unplugged the USB mouse, but now I'm not sure.

  When I go to the mouse, then material he mentions "Synaptics PS/2 Port Pointing Device. It says plugged in the mouse PS/2 port and the device works correctly. There is no devices listed under device settings. In addition, there is an option to display the icon in the taskbar (it used to be there... don't know what happened) but I can't click on it or the other tray icon options.

  I have a Gateway M152s laptop. Any suggestions? Reinstall a driver or something?

  Help is greatly appreciated!

  Thank you!!!

  Hello

  Check with the Gateyway support, documentation in line, or forums that there is probably Hotkeys
  that enable and disable the touchpad functions.

  Gateway drivers and downloads.
  http://support.gateway.com/support/drivers/dlcenter.asp

  Also check the control - Mouse - touchpad settings panel.

  You can also try this:

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL. Even if the touch pad is not displayed, do the rest.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific device
  If it is present.
  http://support.Microsoft.com/kb/310575

  Then navigate to the site of the manufacturer of the system (gateway downloads - access your model - listed above) and down
  the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ================================================

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.