Mouse and keyboard which is held in the point Windows 8.1 connecting...

Similar Questions

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• Mouse and keyboard does not not to login screen (Windows 7)

  As far as I know, an update of windows was held last night. When I try to log on to my office (gateway), my keyboard and mouse (Logitech M310 K520) do not work. I tried to connect in safe mode, but still no luck. I can press F8 before it connects to enter advanced startup options. I went in the selection 'repair your computer', and my mouse and keyboard work fine. I tried a system restore, run the Diagnostics, memory windows and tried several reboots, but without any difficulty. I have tried other mice, tried different USB slots, but all have the same problems. They work very well until what the login screen and then do not respond.

  Please let me know what are my options to resolve this problem. Would like to try more things on my own first of all, but I'm a bit of a novice in computer science.

  Hello

  I suggest to consult these links and perform the steps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/mouse-and-keyboard-do-not-work-at-login-screen/7097129d-2a2d-4e13-b7ef-d51300b4acf8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/mouse-and-keyboard-not-working-at-login-screen/4d759699-f514-4c1d-9ADF-a5724a3ad1e6

  I hope this helps.

• Mouse and keyboard do not work at the login screen?

  Model: Dell Dimension E521 Windows 7 Ultimate
  My PC has no PS/2 slot.

  The keyboard and mouse work through the BIOS and everything until windows starts.
  Once my PC arrives at 'Starting Windows' screen, my keyboard and mouse stop working. (Their power lights and indicator goes out to Midway through the 'Starting Windows' screen)

  They do not work in safe mode, and I've already restored my PC before the problem of return to.  I tried most of the system repair options in the CD (they work here).  Nothing wrong with the hardware or start.

  May I ask if there is a way for me to restore the registry files and drivers without a clean cloth and do a reinstall customized windows 7?

  EDIT UPDATE: YES! Well, I finally got my PC in safe mode with work keyboard and mouse. I had to restore it when the keyboard and mouse worked always, then to restart and login. Once I connect I force shut down the computer before the keyboard and mouse stop working (peripheral installation failure). Then I run my PC in safe mode and it works.

  Currently back up my files, what should I do now to solve the problem? 1 AM edit: the issue has been resolved after much turmoil. It turns out that the keyboard and mouse working again now that I restarted my PC normally out of safe mode.

• How to fix this upgrade Windows 8.1, my mouse and keyboard would not work after the upgrade

  Good day, I recently updated my OS to Windows 8.1 from the store windows, at the end of the upgrade, I discovered that the keyboard and mouse to my laptop did not work again. I use a HP Pavilion 17, came pre-installed with Win8 and I don't really know how to solve this problem. I restored back the system to a previous date when it was working, at least to allow me use my PC but I get notification of upgrade HP. How can home, I solve this problem?

  Go to the HP support website and search for drivers Windows 8.1 for your specific model number. Also check the recent updates of Windows 8 pilot even if your PC came with Windows preinstalled 8.
  http://welcome.HP.com/country/us/en/support.html

  J W Stuart: http://www.pagestart.com

• mouse and keyboard do not work once the computer wakes up from sleep mode

  running Win7 64 bit

  Processor Intel core 2duo
  x 2 corsair 2 GB RAM
  ATi Raedon 4800 series gfx
  all the drivers are up to date.
  no idea why they don't work after the release of the mode not sleep? It is very frustrating as I have either stop whenever I'm done with the computer, or reset when it comes out of sleep mode.

  Oops, ok, so I disappeared for a bit there.

  Yes, I tried that as well.
  OK, so, this weekend, I flashed my bios. and that seems to have solved the problem (woohoo)
  for anyone else reading this, if you are not very savvy with computers, I would say DO NOT Flash your BIOS, but find someone who knows a little about computers to do it. If you do not Flash your BIOS correctly, it can damage your motherboard

• Dell Inspiron 580 s can I attach mouse and keyboard which don't have USB connectors

  I have an Inspiron from Dell 580 s. It has keyboard and mouse usb connectors. I have two old keyboards (never used) and units of the mouse (usb not _ I am tech not and do not know what the connectors of the first type are called.) Can I connect these older versions of my PC (i.e. are there fittings/adapters that can fix the old type to a connector USB. Is there some type of condition of electricity who opposes this?

  Thank you

  Hello!  Google USB PS2 adapter and you should find what you are looking for.

• mouse and keyboard do not work when you install windows 8 on MacBook

  Try installing Windows 8.1 in Bootcamp on MacBook retina 12 "Early 2015.  Created .iso .iso copied & Windows Support software for flashing the drive using Bootcamp Assistant.  Created partition and Windows 8 install starts. The first Setup screen opens etc. language selection display, however, the keyboard, trackpad, or mouse will work so not able to click 'next' to install full.  Anyone?

  1. are you ACO invites you to create Setup from USB? How many options you have on your main screen of the BCA?

  2. Please see https://help.apple.com/bootcamp/assistant/6.0/ for the process.

• is there a single mouse driver to carve microsoft ergonomic mouse? The "Mouse and keyboard Centre 2.3" driver/software is not compatible with my other keyboard...

  Hello!

  So I went on the microsoft Web site to download the software/driver for my "Microsoft sculpt ergonomic mouse", but is the only driver/software they listed the "mouse and keyboard Centre 2.3", which seems to be for their mouse and keyboard...» I tried to install, but after installation than my other brand non-microsoft (mark i-rocks) 2.4 ghz wireless keyboard Connect is more to his receiver and I am unable to use the keyboard. I tried resynciing and everything but nothing works only as long as this "keyboard and mouse center 2.3" driver/software is installed, so now I have to uninstall that and just use the regular driver for the "microsoft sculpt ergonomic mouse" I have, so I can use my keyboard...

  I want to know, is there another older version of mouse only driver/software that I can use with my "ms sculpt ergonomic mosue?  Maybe the latest intellipoint mouse driver would work? What is the latest version and how to find?    or only the "keyboard and mouse Center 2.3" works with this mouse?  so in this case, I have no other choice than to use the generic mouse driver?

  Thanks in advance for the help!

  lendbz

  I finally thought to it. Apparently, when you install the software/driver "Mouse and keyboard Centre 2.3" for the "mouse sculpt ergonomic microsoft", it will install both the driver for mouse and keyboard correspondence pilot as well, even if I only have the keyboard.  I tried this software even with my old microsoft natural wireless laser mouse 7000 and time that he installed only the mouse driver. I'm guessing that the nano-receiver for the mouse ergonomic sculpt can receive both the ergonomic keyboard and ergonomic mouse? .

  If the software installed one "microsoft USB dual receiver Wireless Mouse" under "Mice and other pointing device" in the Device Manager and a "receiver double USB microsoft wireless keyboard' under 'keyboard '.  What I did is simply to go into the Device Manager and uninstalled the driver "microsoft USB receiver double wireless keyboard" and check the box to "delete the driver for this device" so that the keyboard driver will not return and be a pilot and leave just installed microsoft mouse, so now I don't have that the "microsoft USB dual receiver Wireless Mouse" and the generic driver keyboard "HID Keyboard Device" in Device Manager to the the microsoft place unwanted, one, now I can go ahead and install any brand wireless/wired keyboard and the microsoft keyboard driver no longer interfere with it.

• Bluetooth Arc touch mouse without being detected by the "mouse and keyboard Center."

  The mouse is paired with your PC via bluetooth and works very well.  (Please re-read that last sentence before you send information on how to pair.)

  However, when I open the Microsoft Mouse and keyboard Center, it says "no device detected".  For example, I can't change the settings of the mouse. There are the most annoying rattling noise that I would turn off.

  Have uninstalled Microsoft Mouse and keyboard Center, reinstalled latest version. IM using windows 7.

  Hello Frazer,

  We want to get this support, please follow the steps on how to solve Microsoft Mouse and keyboard issues:

  1. run the hardware store in Windows 7.

  2 steps on how to install the driver in compatibility mode:

  a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.
  b. check run this program in compatibility mode.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
  d. try to install the driver and verify.

  Let us know how it goes.

  Kind regards

• Microsoft Mouse and keyboard Center 2.3.188.0 is not Exchange buttons of the mouse correctly with Windows Remote Desktop

  I use Microsoft Mouse and keyboard Center for years with no problems. For example, version 2.2.173.0 worked well. I use Windows 7 Professional 64 bit.

  I swapped the buttons on my Comfort Optical Mouse 3000 (so that the right button's "click" and the left button displays a context menu, for example). When I connect to a remote computer, traded buttons continue to operate as programmed.

  Just set Windows Update to update my mouse and keyboard Center to the 2.3.188.0 version. Now when I use the Windows Remote Desktop to connect to another computer that is running Windows 7 Professional 64 bit, my button is not honored. In other words, on the local computer, the right button of the mouse is 'click '. On the remote computer, the left mouse button is 'click '. The keys are reversed on the local computer, as I have it configured, but not on the remote computer.

  I called Microsoft and was transferred to various departments. I would like to report this bug, although I have to pay out of pocket, but there seems to be no way to report this bug.

  Is there a way to report this bug to Microsoft? Is there a solution? How can I revert to a previous version of Microsoft Mouse and keyboard Center?

  I suggest to perform a restore of the system to a restore point before the update.

  You can also uninstall the keyboard and the mouse Center programs and features.

  Then, go to this site and download the previous version.

  (I couldn't find any previous version on Microsoft sites, but I checked the file hash values, I downloaded Microsoft previously).

  MD5: 4a2fb26c01d96b25487735da2925f89a

  SHA1: a68199c29a840dc8719c7f644ae14a4b138f65e7

  http://www.userdrivers.com/keyboard-mouse/Microsoft-mouse-and-keyboard-Center-2-2-173-0-for-Windows-7-8-x86-x64/download/

• Can't install/uninstall Microsoft mouse and keyboard Center!

  Hi, I got problem with the Microsoft Mouse and keyboard Centre because he doesn't identify my touch mouse correctly (classified as a HID-compliant device and not by its name as my Sidewinder X 4 keyboard). I uninstalled from Add/Remove Programs, and I also uninstalled the drivers for my mouse AND my keyboard (because it showed a double receiver device in device manager). I restarted my computer, but when I tried to install the drivers again in the process of installing mouse and keyboard I got an error message telling me that it was already installed. I uninstalled it again (the "ghost" of it is still listed in Add/Remove Programs) and restarted. When I tried to reinstall, I got the message again who told me that it was already installed. This is when strange things began to happen. The program was once again listed in Add/Remove Programs (this time with its icon and not only a "ghost"). I tried uninstalling and received a message telling me that the uninstall process could not be met because some the original installation files have been corrupted or missing. But now, the program has been listed in the Windows Start menu and when I double click it it started an installation process ceased to immediately resume a message that mkc.msi was missing from a temporary file to My Documents, and he could not proceed, so now I can't install or uninstall the cursed thing. I tried to restore my computer but it doesn't solve all problems. I suspect that some registry entries are not deleted properly when the first uninstall process. I don't want to mess with the registry by myself, at least not until I know what registry entries are created by and in connection with the program. Any help would be appreciated.

  Thanks in advance

  Hello spmisik,

  Thank you for the question!

  I'm sorry to know that have problems you with Microsoft Center of mouse and keyboard. As I understand well you can't install/uninstall Microsoft Mouse and keyboard Center.

  I need to ask you some questions to help you best.

  1. the problem persists with a particular application?

  2. were there any changes (hardware or software) to the computer before the show?

  Run the fixit and check.

  Solve problems with programs that cannot be installed or uninstalled

  Answer to us if you are having problems with Microsoft Mouse and keyboard Center or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• All USB ports not working doesn't no causing of mouse and keyboard doesn't work either (considered the source of the problem). Need help fixing without using the mouse or the keyboard.

  None of my usb ports work, and I can't get my mouse and keyboard to respond.  The computer will start, but none of the usb ports work, and I don't have the use of a mouse or a keyboard works through all the patches.  Help!

  I have PS/2 ports, but no mouse PS/2 or a keyboard... did not have those last few decades and don't know anyone who has these features more

  $6.36 (free delivery if you have Amazon Prime, otherwise on $11 including shipping): http://www.amazon.com/V7-Standard-PS-Keyboard-KC0A2-4N6P/dp/B007R9YV0C/ref=sr_1_1?ie=UTF8&qid=1372529682&sr=8-1&keywords=ps%2F2+keyboard

  during boot, or perhaps in Safe Mode

  Assuming that your keyboard works during boot (and it should; trying to tap F8 to access Advanced Boot Options Menu), probably the simplest method would be to make a Hiren Boot CD, boot from it and use one of the many included tools.  I have not experienced with your particular situation, so I can not tell you what tools will be or will work for you, but my guess is that USBDeView might work.

  Description: http://www.hiren.info/pages/bootcd

  Download and burn (copied from ElderL):

  Download the Hiren ISO here (download important enough but worth it).

  http://www.hirensbootcd.org/download/

  I like to use ImgBurn to create a bootable ISO CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask Toolbar (ever).

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  Thanks for all the help. Seems that there is no easy 'reset' for bad hardware configurations.

  However, I dug to the bottom of my Lac 'tech' and found a USB-to-PS/2 adapter, which allowed me to use the USB mouse into the PS/2 port and reactivate my USB ports.

  All is well now.

  Thank you all for your answers!

  Kind regards!

• The link to support Microsoft Mouse and keyboard Center appears broken

  I downloaded the last Microsoft Mouse and keyboard Center (version 2.7.133.0 on Windows 7 64 bit). [This now supports Excel with the ergonomic mouse Sculpt, thanks!] I noticed that there is a support link that is supposed to take you to the "Microsoft Hardware Support Page.

  When I selected, it opens http://go.microsoft.com/fwlink/?LinkID=259866 which seems to be a broken link. Is anyone else seeing this?

  BTW, it should really be a more easy/obvious way to report this bug, but I couldn't find a (another using telephone support, I guess, but that seems silly). Perhaps it is the location of the broken link? :-)

  Hello

  Thanks for the update on the issue.

  This seems to be a problem of compatibility on the Internet Explorer 11, sometimes this can be corrected by adding the site to your list of compatibility view.

  Difficulty of the problems to view site with compatibility view

  http://Windows.Microsoft.com/en-us/Internet-Explorer/use-compatibility-view#IE=ie-11

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• problem with the mouse and keyboard and windows update does not work

  Since last week to start the computer, I get an error message that the mouse and keyboard functions do not work. He then seeks the errors and then indicates that the service restarts. I want to fix this problem and according to Microsoft hardware, I should download "mkc.msi", which is missing from my computer, but when I do a search for a download, it always automatically directs me to the section "community". How can I correct this problem and get the appropriate download? I use Windows Pro 64 bit with IE 11 on an Acer laptop. I have the Acer site but it was a great help. Also, for the last 6 months, I could not update my computer windows update feature does not work and no error code is presented. I tried everything to restore or re-download the windows update feature, but nothing works, or I can't find a source. I got a blue screen 3 times indicating that windows must be updated and has been the reason for the blue screen. Unfortunately, I don't have a Windows 7 reinstall drive when restarting it spilled about 85 MG of data but not identify what has been dumped. Of course I could use help on this major problem as well even if it cannot be in the category correct community.

  Hello

  I understand that you are having trouble downloading MKC. MSI. I would certainly help you to fix this problem.

  Method 1:

  If you are referring to Microsoft Mouse and keyboard Center, then check out these links to download.

  Download mouse and keyboard Center to get the best out of Windows 8

  Mouse and keyboard Center 2.0 (formerly IntelliPoint and IntelliType Pro)

  Method 2:

  You can consult the following Microsoft article if you are unable to install the updates of Windows on the computer.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.