Mouse (and mouse) do not work.

Similar Questions

• Qosmio G30-163 mouse and keyboard does not work properly

  Hi all

  I installed an update of the firmware of the toshiba site. I think that the upgrade was for the dvd but am not sure. I just saw an available upgrade and installed. Stupid of me. The dvd drive has been previously not recording. If after installing the update of the firmware I has not restarted the machine. In the meantime, I forgot the upgrade and then I did to fix the error of dvd

  "Start the Registry Editor (start, run and type regedit and click on).

  Search for "UpperFilters" and "LowerFilters" (and "UpperFilters.bak" "LowerFilters.bak", if they exist) value under the following key in the registry and delete it:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Exit the registry editor.

  Reset. »

  Now, after restart the keyboard and the mouse does not work. I can't go in safe mode because I can't press ok for the user login screen. I have attached an external keyboard, but it still does not work.

  I use windows xp, I have a lot of data. I can't do anything. If anyone has any idea please help me. The laptop is out of warranty. I'm stuck. Help, please.

  John

  S rally strange because I put t see a link between the firmware CD/DVD, UpperFilters and LowerFilters and the keyboard and mouse.

  This is first time that a removal of the upper and lower filters would undermine the functionality of keyboard and mouse. Which is really strange.

  Anyway, you are able to access the BIOS? If this isn't the case, then this is not good.

  First of all, you should try to save the data stored on the HARD disk in this case, I recommend to remove the laptop HARD drive and connect it using a USB HDD on another controller.
  This would allow you to save the data to another HARD disk.

  Put the removed HARD disk in Notepad, and then try to reinstall the OS from the Toshiba restore CD.
  I hope that this will be possible because I don't see another way to get the operating system again.

  Good luck by a friend

• Keyboard and mouse do not work

  I have a HP Media Center M7100e.  I have just completed a system recovery. After reboot, the screen indicates that I click next to complete the installation.  The mouse and keyboard do not work.  Work on the initial startup of hp screen, but are disabled.

  Please provide a solution.

  Thank you

  Ron

  OK... well., his back to recovery seems to be suspended.

  Here is the HP recovery troubleshooting document:

  http://support.HP.com/us-en/document/bph07144

  In this document are States:

  Recovery takes too long

  If your computer stops responding after using the recovery program, follow these steps:

• Keyboard and mouse do not work on startup.help

  Keyboard and mouse are unresponsive at startup... help

  Hello

  Please write in the Microsoft Community Forums.

  I understand that the mouse and keyboard do not work to start the computer.

  Let me go ahead and help you with the issue.

  It would be more useful, if answering these questions:

  1 have you ever try to use different mouse and keyboard on the computer?

  2. What is the brand and model of the mouse and keyboard?

  3 did you do changes on the computer before the show?

  I suggest you follow the provided methods to solve the problem:

  Method 1: Start in Safe Mode:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  If the problem does not persist in safe mode I suggest you perform the clean boot:

  Method 2: run the clean boot:

  Perform a clean boot to determine if any 3rd party service is causing the issue:

  http://support.Microsoft.com/kb/929135

  Note: After you perform troubleshooting steps to clean boot, follow the steps in the link to start the computer to Normal startup mode.

  Method 2:

  Run the fix it and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• System recovery: keyboard and mouse do not work

  HP 300-1025, Win7x64. Trying to do a restore of system of hard drive or CD, takes 3 to 6 hours to charge Cyber utility, but equipped with standard wireless keyboard and mouse do not work and can not select the option to retrieve!  Tried to use the wired keyboard/mouse but still not recognized. Help!

  Reinstall the RAM chips after contacts with cotton cloth to remove the accumulation of such static recommended by HP TotalCare. System load of Cyberlink, repaired Win7 and back to normal.

• MS point 5000 laser wireless mouse does not work, but scrolling and magnifying glass works

  My point of 5000 MS wireless laser mouse does not work, but work wheel Magnifier button and scroll.  What could cause this problem?  I there something wrong with the mouse or something should be cleaned?  This is the first question I had after 3 years of use.

  I have not any hardware or software changes, and the problem is constant, not specific to any application.

  I restored my system to my latest backup when the mouse was working, but it has not solved the problem.  The software update has not solved the problem.

  I installed a different mouse, which works very well. The wireless mouse does not work on another system, I assume that it's broken and I will replace it.

  Thanks for your suggestions.

• My keyboard and mouse do not work. Can't click or type anything.

  Original title: keyboard and mouse

  Hello, my keyboard and mouse don't work I can get on at the office but can't click on what whatsoever as the two keyboard and mouse do not work I tried the BIOS but still couldn't have tried different keyboards and mice, and they do not work or do not know what to do please help

  Hello Shirley,

  ·         Have you checked if the same keyboard and mouse work on other computers?

  ·         Are these PS/2 or USB devices?

  ·         You did changes to the computer before the show?

  Method 1: Try to connect the keyboard and mouse even to another computer to see if they work.

  Method 2: If they are PS/2 devices, then try to connect to USB devices to check for the issue or vice versa.

  Report of the results.

• Mouse and keyboard does not work after sleeping on a laptop

  After awakening from a sleep of my laptop, my keyboard and mouse went crazy, pushing buttons at random on the screen, beep and completely freeze then both. I restarted my computer and got to the login screen which I was able to type in, then he connected and the keyboard and mouse do not work. I plugged in a USB mouse and the mouse that works very well. After some playing around, I got the keyboard works by accessing the control panel and change the speed at which the keys type and for some reason, this fixes the keyboard. However, I am still unable to get the mouse works.

  So three questions, 1 - what happened in the first place? 2 - why my keyboard was working to connect, but not once it really connected? 3. How can I get my mouse back?
  Thank you!

  Hi NicoleWood,

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Hope this information is useful.

• Keyboard and mouse did not work properly after the service pack 2 update

  key Board runs very slowly and mouse runs through the screen when it is used. Acer Aspire 5050-3371 came with Vista home

  Hello

  Do you use a touchpad or mouse wired / wireless?

  Your laptop is connected with laptop keyboard?

  I suggest you to check if the keyboard and mouse work will find in safe mode. Follow the steps that will help you perform the following checks:

  Method 1

  a. restart the computer.
  b. start typing the F8 key.
  c. you get early boot option window.

  For more information, see: the boot advanced (including safe mode) options

   

  After the entry into SafeMode Log in your user account and check if the keyboard and mouse are working.

  After you perform method 1 Troubleshooting and if you find the keyboard and the mouse does not work correctly then you can perform the following procedure.

  Method 2:

  You can also perform the clean boot and check if you are able to start successfully. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate conflicts of third party software.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:http://support.microsoft.com/kb/929135.

  Hope the helps of information. Please post back and we do know.

• Clicks of the mouse do not work in IE9, Excel, iTunes and other programs.

  Clicks of the mouse are not working.  IE9, Excel, I-tunes and a few other programs.  It sometimes takes several mouse clicks, or in the case of IE9 when you activate the address bar or Favorites or even try to select a checkbox it seems that you must hold the button of the mouse down and after a few seconds, it will recognize the command.  With favorite IE9 you must hold down the mouse button and drag down to the place wherever you need to be communicated, then click on?  In Exel, the mouse cannot select multiple cells, in other programs her taking mulitple mouse clicks to highlight & copy text in the text example I've copied below from Microsoft answer Forum - I followed the instructions below and it did find and fix some problems, but there were others, he could not correct?  They were listed in another file, but I don't remember the name of the file, or how to access it?  I have run Norton 360 on my system and a complete analysis will detect all viruses?  Please advise?

  Thank you for using the Microsoft Answers forums. I suggest that you run the System File Checker. To use the tool (SFC.exe) System File Checker. To do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Thank you

  Andrew Pugh

  Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• Keyboard and mouse do not work when connecting

  I have windows 7 and ubuntu 9.10 "multiboot". He had been working well, until I rebooted. I had just done a WinPE boot drive, and I wanted to test it.

  Now the keyboard and mouse do not work on screen or login in safe mode.

  Help, please

  LKGC?

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• Satellite C660 - click of the mouse does not work

  Hello

  I bought this laptop 5 weeks ago and now have problems with the right, click on the mouse does not work. Left click sometimes opens to the left, click on functions and leaves me is impossible to close programs or closed, double clicking in the pavement or enter does not work also.

  I tried to do a system restore to the factory, but I can not click on the next to take me through the restoration and end up having to close it via the main power switch.

  Any ideas please?

  Hello

  You have the same problems with a mouse external or just the touchpad?

  If an external mouse works correctly, you can use it to do a recovery install. This can help you to solve the problem, if this just s software.

  Not least have last but you tried to update the driver for the touchpad? You can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• HP laptop: wireless mouse does not work

  After mobile update on oct 6th wireless mouse is not working.when I am looking for in the receiver 2.4 g device is here.

  I did a hard reset but it does not. The mouse is iball freego 2.4 g wireless optical mouse

  and even when I went to download a software to reinforce the msg me: "We have couldn't retrieve the list of drivers for your product." Help out me

  dhruvil28

  Hello;
  
  Let me welcome you on the HP forums!

  Sorry, but if your talk to get the mouse drivers from HP, what's not at work, such as HP does not include drivers for the hardware not HP.

  Have you tried to download the drivers from the manufacturer of the mouse?

  You must go to the settings, update & Security-> Windows Update.

  Then, choose Advanced-> history to see when the updates have been applied last. If you see one that include device drivers, who might be the problem. So, if you can, you should see if you can restore the drivers that are causing the problem. Do so you by going into Device Manager, see if the device is still listed and so, trying to restore the last driver update.

  And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.tenforums.com/tutorials/48277-driver-updates-windows-update-enable-disable-windows-10-a.html

  If the appropriate device adapter is no longer present in the Device Manager, what MIGHT work is something known as a repair installation. It is less destructive of all Windows recovery features and rewrites the Windows system files, leaving your apps, settings and data intact.
  
  To do this, you will need to use the link to the installation media to download Win10 and burn a DVD or create a USB key: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Once you have, follow the instructions in the link: http://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.html

  Good luck

• The mouse does not work on my new Satellite L750/L755

  Hello world

  I bought a toshiba Satellite L750/L755 but the mouse does not work, I have no control on it that if I use an external mouse, while I have put pressure on the touchpad.
  I tried the following options:
  I updated the driver - I changed the operating system

  but nothing, still the same problem. Next laptop will be a Mac for sure.

  I look forward to hear from you

  Daniele

  Hello Daniele

  It's really strange that the touchpad does not work even if you have installed the right driver and installed the operating system again. At the first moment, we can say there is probably a hardware problem, but please be sure touchpad is listed in the Device Manager and also active correctly (FN keys).

  Check it please all the properties of the mouse.