mouse lock light constantly

I just made an update to my mousepad and mouse pad lock light stop. Although all the mouse functions work. but now I am unable to block the mouse pad.

laptop is a HP envy 14

PRAB says:

I tried to double tap, but it does not work. then I reinstalled the driver and now the light is always off, and I can't lock the mouse pad. as the double tap always works when it is applied in the light of the touchpad.

Please follow these steps

(1) uninstall all driver you have installed from the Panel

(2) restart the computer

(3) install the driver of my previous post and try to activate the POWER touchpad by pressing light.

Its a little difficult and you must put your finger just above the led on touchpad light

Tags: Notebooks

Similar Questions

  • Pavilion G6 Caps lock flashes constantly but the laptop work.

    Hello!

    I've owned my HP Pavilion g6-2292sa Notebook PC (running Windows 8) for about 4 months now and tonight, so I was watching just the net that I noticed that my Caps Lock led flashing continuously, a flash every second. My laptop works fine, and I rebooted to try to stop the flashing, but with no luck. I checked Flash and positions that average hot flashes but mine does not fit in all of this. It is starting, it is not beep just the caps lock flashes constantly. I checked my other lights and see no other spazzing out like that. I'm rather worried because I had to have a new motherboard and HARD drive in a month of purchase. I googled not materialized. Can someone help me please?

    Definitley weird!

    Can you check the UEFI environment in F2? Let's see if it happens there inside and outside to win 8.

    If it happens again, we can try a hard reset - remove the battery and AC and hold the market for 30 seconds, then plug back in. We can also try a BIOS flash - checks whether there is a newer version or re flash.

    If the problem does not occur in BIOS - then you can try a Virus scan / update or restore possible system

  • Magic mouse - no lights?

    I just bought the magic mouse2 and I have an IMAC of 2012.

    I plugged in the cable of the lightning of the magic mouse and turned on (and it is plugged in a few hours) and theres still no light or anything?

    I updated my computer rebooted, used various lightning cables but nothing seems to make the charge of the mouse or light in anyway?  This mouse is defective?  I've never had problems connecting the touchpad or keyboard before.

    Thanks for any help

    You say that you have updated your system... what version do you have now.  (It should be 10.11.3 El Capitan)

    If you have an Apple store in the neighborhood, take it they test it on place and replace if necessary.

  • NUM Lock light still on - how to disable?

    I don't know what keys combined I pressed on, the number lock which light below the F11 key always turn on. Subsequently, some alpha keys does not work.

    I think that FN + F11 should turn off the number lock light, but this combined only keys, turn on the light a bit dark, it remains light and keys alpha still does not work...

    Help me ~ ~

    Hello

    It s very strange because the FN + F11 key combination turn the light on and off.
    Did you try different combination of keys FN + F10 or F12?

  • CAPS & NUM LOCK lights don't light up - found the Cause of this problem. 16/02/2013

    HP dear Forum,

    After 15 months of this issue where my CAPS and NUM LOCK lights on my HP-G72t-b00-cto notebook PC will not turn on, I finally found the cause of this problem. 16/02/2013

    Hello paulwayne317,

    You shouldn't need to disable the power management software, but simply adjust to where it is not longer Hibernate.  Take a look at this document, which should help.

    Please let me know if it works.

    Good luck!

  • Why the system idle process makes my desk fan light constantly

    Why the system idle process makes my desk fan light constantly

    The system idle process has nothing to do with your fan coming.  Your computer constantly monitors the temperature of your CPU and if this temperature is too hot, then the fans move on to high speed.  You can use the freeware 'CoreTemp' program to display the temperature of your CPU, if you want.  Temperature rises usually when the computer is under heavy CPU load but the usual cause of high speed switching fans is an accumulation of dust inside the computer and close the CPU fan.  Open your case and clean the dust.  A can of compressed air makes quick work of it.

    HTH,
    JW

  • HP Compaq Presario CQ62 blank display, solid caps lock light light orange, solid f12

    Good afternoon

    Currently, I'm stumped on troubleshooting lights error code for a hp compaq cq62 customers. I tried the hard reset, the reinstallation of the memory and even plug the laptop directly into the wall instead of a surge protector with battery removed. I can't find any solution on the HP site or any other site of forum for this issue as to what a solid caps lock light and a solid orange light on the f12 key.

    Currently I think the customer may need a new back light system or a new processor. Before to come to this conclusion, I hope that there is a clear solution for my problem. Thank you for any assistance.

    Hello @NotURt3kSupport ,

    Welcome to the HP Forums!

    I understand you are having problems starting your PC clients laptop Compaq CQ62.

    A single glance on the caps lock light usually means it is a failure of the CPU and requires a replacement of CPU or the motherboard.

    Also try to go through these documents to resolve startup problems:

    Computer does not start and the lights blink or the computer will beep.
    Troubleshooting of the black screens with no start-up or start-up error message.
    Tests of hardware failures (Windows 7, Vista) or hardware failures (Windows 8).

    You can tell if the backlight is the issue or start by plugging in a VGA monitor to see if the screen is displayed or not. If this is the case, you have on the laptop display problems. If it isn't, you're dealing with a problem of CPU, GPU or motherboard.

    Also, it would be useful to know what product and the operating system you are using. For more information on the search for your model and product numbers, click here: How can I find my model number or product number? What version of Windows you are using, click here: Windows operating system am I running?

    In the event of hardware failure I suggest you contact the services options HP telephone support. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.

    Hope this information helps!

  • Caps lock light does not illuminate

    Caps lock light won, t turn on. Vista.   HP laptop

    Hello

    Ask that a specific question about a particular piece of HP provided material, I suggest that you ask in the Forums of HP's Support at the address provided here.

    http://h30434.www3.HP.com/

    See you soon.

  • where is the caps lock light on the Microsoft Wireless Comfort Keyboard 5000? Have no light of any kind of keyboard.

    There is NO LIGHT of ANY KIND on my keyboard! -NO F-LOCK LIGHT, NO CAPS LOCK LIGHT, NO BATTERY LIGHT

    Hi JASPYONGTAEK,

    I suggest that you contact hardware support from Microsoft for more information about the available keyboard features.

    http://www.Microsoft.com/hardware/en-us/support

  • Balnk scrren, flashing caps lock light

    laptop dv6, blacklist display when turned on, caps lock light flashing. I tried to unplug the power cord, removed battery as suggested, however, the problem persists.

    I hate your welcome, we could not solve your problem because it was a hardware problem. I hope everything is working for you.

    Also if you mark this thread with a solution so if other members of the community have the same problem, they can see what we were doing, as if I help you if you can click on the little star on the left under my name it would be well appreciated.

    Thanks again and have a wonderful day

  • Satellite Pro M70: "Caps lock" light will not stay

    After repairs to toshiba in my brand-new laptop pro M70 (System Board has been replaced) I noticed that the caps light does not work when the caps is on. The bulb works as it lights up when you press the caps, but there are not on.
    Although the installation of ceiling works I don't know when the caps lock button is enabled or disabled. Very confusing.

    Any help is greatly appreciated. I am running MS windows XP pro.
    Brendan was soon

    Hello

    You suggested that this light doesn t work since the replacement of the motherboard.
    Am I wrong? In my opinion this is something mechanically. Can not solve yourself.
    In this case I recommend to contact the ASP again and explain the situation. Generally, the warranty should cover the repair procedure.

  • Presario CQ56: Caps Lock flashes constantly

    When I press the power button, I hear that the components start to work, but the screen is completely blank and I can't do anything but turn off the laptop. What I see is the white LED on the constantly flashing caps lock. In addition, there is orange led on the button that has a WI FI signal. It is orange and constantly now.
    So far, I have tried a hard reset, did not have any change.
    Thanks for any help.

    Test

  • the mouse cursor moves constantly

    It is difficult to open anything or move to any particular item because the cursor moves constantly on it.   PLEASE NOTE: Although my address on Live ID is , I need to be contacted at .   I have to find a way to change my address with Live ID.

    Lynda

    Hi Lynda,

    1. you are using a laptop or desktop?

    2. what kind of mouse you are using? What is a wired or wireless mouse?

    3. did you of recent changes to the computer?

    If you use a laptop, try to reduce the sensitivity of the Touchpad and check

    Change the settings of the mouse

    If you are using a desktop computer, you can try to reduce the hardware acceleration and check.

    a. click the Start button, Control Panel.

    b. now, select appearance and personalization. under display, select adjust screen resolution.

    c. now, select adjust the resolution.

    d. click Advanced settings.

    e. now, click the Troubleshooting tab, and select the change settings button.

    f. in the Security dialog box, click on continue.

    g. move the hardware acceleration slider to the third notch.

    h. click OK and restart Windows.

    Hope this information is useful.

  • Wheel mouse optical light on any computer turned off

    The light of this mouse is on when the computer is turned off.  Why and is at - there a way to disable the mouse while the computer is off?

    Please advise as soon as possible, thank you!

    Not always. It depends on the system. He stays here too. As it says here

    LEDs have a certain capacity and use very little energy. the
    reason why they remain lit, is that the current is kept within them is
    discharge slowly. unless they are wireless devices and have their own
    power supply (battery) there are no parameters as there is no external to power
    them

  • Microsoft Wireless mouse 3500 lights after battery replacement

    I have this mouse about a month ago, and it's worked fine, so far. I had to replace the battery, and now it will not work. I'll turn it on and the light will shine for about a second and then he'll just turns off and it won't work. I tried using different batteries, clean the compartment the battery, everything. Help, please!

    Hello

    I suggest to try the steps in the following Microsoft articles provided and check if it helps.

    Troubleshoot failures in the response to the mouse or wireless keyboard: http://support.Microsoft.com/kb/838398               

    Note: Also check if the mouse works fine in another computer.

    I hope that helps!

Maybe you are looking for

  • Impossible to update 3.16 to the latest version of firefox crashes

    I have a less than a years Lenovo computer, running windows 7, 64 bit... I'm under 3.6.14 because... (drum roll please) I had the version 3.16 and then when firefox 4 is out, I tried and he hated, then returned (after looking for him and find the fil

  • Is it possible to move the dock to the 'start' position in El Capitan?

    I wish that the dock to appear in the upper left corner of my screen. I have the dock on the left, but I want to move it to the top in the corner (the starting position). This could be achieved in an earlier version of Mac OS X with a command line te

  • Picture It aging when trying to install

    Why can't I install Microsoft Picture It 2001 on my newer PC (XP)... I get the message... Close all programs, and then try again... I do... but still no joy. Help! Please

  • How do I stop using the product key in my PC, so I can use it in my laptop?

    A long time ago I had installed Windows Vista (original) on my PC at home. But now I m leaving in another city and I m just using my laptop. I received a message through the Windows Activation (¨The product key you typed is already use¨) and two opti

  • GhettoVCB: /tmp/ghettoVCB.work: file exists

    Hello worldI use ghettoVCB, recently, I got this error when I tried to do a dryrun or a backup."/ tmp/ghettoVCB.work": file existsAsh: wrong numberI looked in all the documentation, but nothing about this problem as possible. Maybe I need to delete s