MOUSEPAD not working not

Similar Questions

• My mousepad stopped working

  My mousepad stopped working. How do I turn it back on?

  My mousepad stopped working. How do I turn it back on?

  A mouse pad is normally a rectangle that you run your mouse above when using rubber.

  It's a laptop? Do you mean the touchpad, not a mouse pad?

  If so, and it has stopped working without your having done anything, it is likely that the material is not the manufacturer of the laptop.

• HP Pavilion Notebook g6: mousepad not working

  Hello! Yesterday I was I have on my laptop and I closed it to go outside (mousepad worked) then when I came back I had on my laptop and the mouse would not move for us are my finger has been, and it clicked. I tried the drivers update and installation with the keys and I tried the FN and F5 stuff, but nothing works! Help? Thanks in advance!

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you are facing difficulties to solve problems with your laptop Touchpad

  We will surely help you with this

  Steps to drain the static charge and load the BIOS default settings to solve the problem

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now, please wait until the unit load the Windows operating system

  Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

  Please click on this link to find several troubleshooting steps to solve this problem

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Mousepad not working not not on Helix 2

  I just bought a new propeller 2. The mouse pad does not work. Is there a key combination (function key, etc.) I might have accidentally pressed to turn it off?

  Or maybe it's a DOA unit? I rebooted, disconnected and mooring, etc.. I have the Pro keyboard.

  I saw there was a BIOS updated and who ended up fixing it. I don't know if that was really addressed by the update of the bios, or if she was just 'reset' things.

• Mousepad not working do not at all.

  Hello

  I use HP envy 17 notbook PC. This is a 2 month old. Since today morning the mouse pad is not working all of a sudden. I had to use the usb mouse to work. I tried all means to install the drivers and all the other stuff but its not working. Please suggest something, its urgency.

  Thank you in advance.

  Hello

  Go to Device Manager and uninstall the driver, and then restart the device.

  Check if the Touchpad is turned on.

  Go to the HP Web and website to update the driver for the Touchpad and the Bios and see if it solves your problem.

  Last option, once the unit is on hold type the F11 option and see if the Touchpad works here if in case mouse work not you may have to contact HP Support and get the machine.

• Mousepad not working not properly... !

  We have a hp laptop pavilion g6 1211. bought a few weeks ago. but the mouse pad does not respond properly. the arrow on the screen jumps a lot and when it is on the internet, when we try to scroll or move the mouse that we just wander.

  sometimes is not responsible at all!

  any tips?

  Hello

  Assuming you are using Windows 7, try the following.

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53851.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  Once done, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  Kind regards

  DP - K

• Pav Notebook: Parameters of Synaptics Mousepad not saved after reboot with Win10

  Hi all--nine of these forums. I find that my settings are lost whenever I have reset my laptop for the Synaptics touchpad options scroll mouse, which means I have to be forever just put the laptop to sleep, or reset the settings when you restart. A minor annoyance but when shell out you for a new phone, you expect the basic options to actually work.

  No idea how to fix this? Apart from the very disappointing performance, it is my only complaint for the product

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Satellite Pro M70 - mousepad stopped working

  The internal mouse on my Toshiba Satellite PRO M70 pad went dead. The cushion or the two buttons mouse work. It still works with an external optical mouse.

  Is it possible to test the mat mouse internal or re - install a driver for it?

  Hello

  Are you sure that the mouse pad feature is not disabled by using the FN + F9 key combination? Please check this box.

• Satellite C660 - my mousepad stopped working

  I was me satellite c660 today when the buttons of the mouse pad and the left and right hand just stopped workin...

  Then to control the mouse and Panel options and they say the software that manages the carpet mouse everything is perfect, but it is obviously not.

  Can someone help me? :(

  Hello

  First check to see if the touch pad is not disabled.
  You can enable and disable the touchpad through FN + F9.

  If this is not enough, I recommend updating the driver for the touchpad.
  Uninstall the driver for the touchpad, first, reboot the laptop and then install the new touchpad driver downloaded.

  Good luck

• Mousepad of HP ENVY TouchSmart to walk/don't zoom not ect... After upgrading to the full version of windows 8

  So, I want HP Touchsmart Sleekbook 4-1105dx. After my update to the full version of windows 8, I have any other problems. My mousepad not wander through the pages, zoom or function. I am able to click, but I can't scroll. Help, please

  Thanks, but actually, I downloaded the newer version and it works perfectly! This is in fact the link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us & lc = on & softwareitem = ob-124009-1

  I solved it on my own! but thank you very much for the reply!

• Mousepad does not not Pavilion dm4

  Last night I woke up my computer to see that my mousepad not working. I thought it was some glitch like many others I've already found on this laptop (keys sound did not work properly, led light silent, not wanting to come away, etc.) And hope to restart and to solve the problem. Today, after the reboot, my mouse pad still does not work and I, apparently, am not the only one with this problem.

  My specs:

  HP Pavilion dm4-2070us

  Windows 7 Home Prem OA

  I tried updating the driver (he says that the version that was linked to the exact identical on my hard drive) and I also tried the update of the BIOS with the same result. The mouse pad IS NOT off. If it's light is no longer on this subject as well and it is stuck in stop mode. The mouse pad does not appear in the Control Panel, no matter what I do.

  I'm tired of all the problems that I've had so far on this laptop because I got it since mid-August. My friend told me that HP has been much better than Dell, so I went with it instead that little birdie told me. I was bragging to everyone how wonderful this computer was, but now I feel like I should go back and apologize to all my friends. Please say it is an easy fix and I forget something quite obvious. I wouldn't turn my back on HP for a computer laptop stupid.

  Currently, I solved the problem. If anyone has a similar problem to mine, before sending it in, maybe you can try what I did. Last night I let my computer choke completely then took out the battery for a few seconds. After that, I plugged and let it load a bit (maybe 30 minutes?) before trying to start it and try again the mouse pad. It works fine now, the zoom in/out and Ahmed seem to even work a bit better now.

• Aspire 5738z motherboard works outside the laptop breaks but not?

  Hope this is the right part of these forums...

  Someone at - he heard of this before. (STUPIDLY), I decided that my fan needed a good, clean, and in a moment of madness I removed the heatsink and cleaned, I have had no paste to renew with at the time but thought it would be ok.

  Acer Aspire 5738Z dedicated ATI Graphics Intel Core 2 Duo

  I missed the fan plug when I re assembled the laptop and of course, it wouldn't start. So after back by getting the cleaners and stick and PLUG the fan, I tried to start again... Nothing to do apart from the fan works and stops, then comes back on - the power light lights up - the processor lights up for a second - and the cd tried to run.

  I did all the usual like removing the Ram etc Hold button power and did so on... still no joy

  So I stripped the motherboard into the case and everything took off, I have replaced the following only

  HARD DRIVE

  1 x 2 GB Ram

  Monitor

  Battery

  And success, that it starts without a problem

  I tried then restarts and they were very good, so I put everything together and nothing only happened?...

  So I stripped it again and this time I plugged everything

  HARD DRIVE

  2 x 2 GB Ram

  CD/DVD

  Monitor

  Battery

  WiFi

  USB mouse

  USB keyboard

  Began and once again without any problem she started and restarted a time without end. So I removed all and placed in the base of the case and then reconnected everything and got the same good boot. I then placed the upper part of the base on so he was running and it was fine, then I rebuilt around the laptop running until the unit was together again... Always slept running. Although my mousepad not working keyboard

  OK, the moment of truth... Restart... or rather not - back to the beginning with no boot

  Does anyone have any idea as to the cause - I wonder if the keyboard or mouse may be at fault, but as far as I know, it could be more sinister.

  Any help would be fantastic - but please no suggestions to remove the ram and pressing the power button down as my finger no headache trying this lol

  It seems to me the connection of the USB unit on the side of right which is at fault. I have rebuilt the laptop but removed the USB cable and it works fine... Looks so much like problem solved for the moment in any case

• Mouse pad does not work

  A few months ago my mousepad stopped working for no. (obviously there must be one) reason. I noticed it after that I started to share music with other computers on our network. At first, I thought that the red light was something to do with it, then I discovered that the little symbol underneath was a mouse pad.

  My laptop no button on it that turn the pad on and apart, and properties of the Synaptics said that it works well and is connected to the right channel.

  Hello

  Check with support of their documentaton online and drivers, system manufacturer and ask in their forum
  (if there is one) that several will have keyboard shortcuts that will turn the Touchpad on or off.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Mousepad on HP Pavilion does not work

  For some reason my mouse pad no longer works.  It works with an external logitech mouse.  He used to work if I had plugged external mouse or not.  This is no longer.  The cursor does not appear, and if it is there, I can't control it.  When the computer reboots, the cursor is displayed only if I plug the logitech mouse.  Can you help restore this mousepad please!

  I have Windows 8.1 if it matters.

  Thank you

  Mark

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you are facing problems with the Touchpad of your laptop
  We will surely help you with this

  Steps to drain the static charge and load the BIOS default settings to solve the problem
  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 to load the default Installer for BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now, please wait until the unit load the Windows operating system

  Now please re - install the drivers for touchpad of HP Web site in order to solve the problem

  Click on the link to find the steps below involved in disabling the Touchpad
  http://support.HP.com/us-en/document/c03922412

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• My wireless mouse just stopped working. I can still use the mousepad however. I changed the batteries does not. Then I tried another mouse wireless, and it didn't work either.

  My wireless mouse just stopped working.  I can still use the mousepad however.  I changed the batteries does not.  Then I tried another mouse wireless, and it didn't work either.  What can I do next?

  Buy an inexpensive wired USB mouse for less than $5 and see if it works.  As far as I'm concerned wireless mice are more trouble than they are worth.  YMMV :-)

  Good luck.