Move a clip in the program monitor and have movement that all keyframes move them relatively

Similar Questions

• EN: Selection/direct manipulation of clips in the program monitor

  If you accept this workflow improved, please add your own voice here www.adobe.com/go/wish.

  Improvement / FMR. *

  Short title of your desired function: direct selection of clips in the program for the change monitor

  How would you like the feature works?

  We should be able to directly monitor select a clip/active in moving/resizing/rotation program.  Even better would be the ability to SHIFT-click-select 2 or more items to move/scale/rotate them in tandem.

  Why is this feature important for you?

  The current workflow is convoluted/intuitive because it forces users to: 1) select a single element of amendment under the ICT in the scenario, 2) click on 'Motion' in the effect control window. (3) make the changes of the Motion to the ECW and/or the program monitor. (4) repeat steps 1 to 3 for all clips/additional titles in the program monitor that had to be changed in tandem.

  Although this feature request may require implementation of the 2 step, first of all, allowing direct selection of a single item and later allowing manipulation of selection/movement of 2 or more items at the same time, allowing one to select it directly in the monitor of the program for now would be a major step forward by finally allowing to change the attributes of the Motion 2 or several seeds at the same time.

  NOTE: For live clip selection work efficiently, including "selectable" of securities would need to be automatically limited to the dimensions of the text itself and not by default to the dimensions of the video settings as is currently the case, because otherwise, it would be impossible to directly select a clip in a title to equal video dimensions.

  2) click 'Motion' in the effect control window.

  Top tether can be selected by double clicking in the MP.

  If the undelaying clip is visuable and falling outside the bounding box of the element to overprint (in pips) you can double-click this also in the MP to get the rectangle encompassing.

• No preview of the clip when I select the side and drag (as it was in the program monitor) now, it shows that what is in order at this time? How can I disable that (in the way that it used to be)?

  it totally ruins the way I change...

  I put several angles of the camera on the timeline and drag through each one to find the pats I want to reveal in my edit

  

• Whenever I have extend or contract a clip 2 clips appear in the program monitor and there is a HUGE gap in which I can't do anything with the Prime Minister - why this happeneing?

  

  Disable

  

• I am running CS6. I break a freeze a frame of my the program monitor and record anywhere. It is screwed.

  This image is squashed horizontally and cannot be used to send to the client in any format that the aspect ratio is wrong. However, I can use this image in the timeline, and everything is good. What is going on?

  [double post removed by mod]

  Its in the export settings. In the its value screendump PNG, but you can choose other formats even if you wish.

  

• Different sizes of resolution between the Source monitor and program monitor

  Hi guys!

  Newbie here-sorry in advance. The size of resolution replaces my source monitor monitor of the program to the point where its very large in the program monitor and the image stays that way when exporting... What I am doing wrong?

  If all the clips are from the same camera, you make a new sequence that is correct, then put all your clips in it and change. You are simply based on this first clip sequence settings to lay the foundations for your project.

  If you have snippets of a few different types, such as 1080 p and 720 p, then you must decide on a workflow that suits your needs. If the final result must be distributed to 1080 p, you high-end 720 p content, but end result must be 720 p, better off to reduce the content in 1080 p. It depends on different factors.

  Thank you

  Jeff

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo

• The program Monitor stops the video play list

  Hello

  I lose the composite image of video playback in the program monitor and the Source monitor after a few minutes. Audio is not yet.

  While the video plays, a random video color video screens near bar overall top 10 lines of pixels from the left edge to the right edge, then the video freezes on video, but you can still listen to. After awhile, an error message appears and the first to be forced closed. "NVIDIA OpenGL driver detected a problem with the display driver and can not continue." Error code: 3'

  It happens on all projects ranging from different resolutions and sizs from 30 seconds to 40 minutes. I suspect it has something to do with this error of the video and pilots communicate do not, but something causes of creation to arrive after the clip, played some time to display. I tried a few online solutions, others have had success with, but it doesn't have a lot of solutions fully documented for Windows users.

  This put all my projects on hold. Any ideas on how to solve this problem?

  Other clues:

  able to see reading through the other display modes such as waveform, vectorscope or rc

  be able to see the video images to change if manually move the playhead to blue

  Windows Media Player plays video files very well

  Closing the first to reopen the first time very well for a few minutes

  -----

  APPLICATION SETTINGS-

  Adobe Premiere Pro CS 5.5 (5.5.2)

  "Scratch disks": using separate SATA HDD

  Player settings: default player - adobe reader

  playback settings-

  The TV format conversion: software

  play and pause resolution: 1/2

  Displays the first field

  Project example settings-

  sequence parameters: pixel square AVCHD 1080i, 1920 x 1080 16:9 30 fps offset

  Video: I-Frame only MPEG

  Codec: MPEG I-Frame

  Frame rate: 29.97

  DETAILS OF THE SYSTEM-

  OS: Windows 7 Pro 64-bit

  RAM: 12.0 GB

  Memory RAM used (Task Manager): 3.8 GB/12

  Desktop theme: classic Windows (disabled aero)

  Intel Core i7 920 2.67GHz

  NVidia Quadro FX 3800, 1 GB GDDR3, pilot: 9.18.13.697

  3D disabled, allow material dealing with disabled, software to manage color settings, 60 Hz

  Screen: Asus VG278 native 1920 x 1080, using 60 Hz

  Display driver: generic PnP monitor (there is no real drivers for this monitor from the MFG)

  Card motherboard BIOS: no integrated graphics chip

  UPDATE:

  A day later, Nvidia released a new driver updated 03/05/2013.

  I now get a success rate of 100% of the program monitor reading, even on projects that had a few preliminary questions.

  Clean the pilot installation option / default settings

  Version of the driver (from NVidia Control Panel): 320,00 (03/05/2013)

  Version of the driver (from maps Windows display properties): 9.18.13.2000 4/18/2013

  That will do it!

• During the insert, the program monitor does not display the adjacent images

  On page 207 of the manual, it says:

  The program monitor can help you determine where to place a clip you add to a sequence. During a change of crush it, it displays the images

  in the adjacent sequence for the new clip head and tail. During a montage of the insert, it displays the adjacent images at the insertion point.

  When I drag a clip in the project Panel in a sequence, everything works as indicated in the manual. And when I drag the same clip with the program monitor, everything works still fine - but I don't see any adjacent items displayed. How to view?

  This works when you drag the movie, not the program monitor.

• Why my subtitles appear in the program monitor?

  Howdy!

  I'm doing some captions, body CC 2015, horrible on a video with an audio track.  I created the subtitle file, turn on the display of the legend on the program monitor and made sure legends I created (just a little far) are activated without a doubt too.  When I saw the legends in the monitor, I exported just the section captioned a. MOV file, with embedded captions once and once with them "engraved" on the video.  The subtitles are displayed, even if they are a bit of a mess (spaces, etc.), so I know that the first known legends.  So... why they do not appear in the program monitor?

  Any help appreciated!

  (- Jim 8 ^)

  Looks like that the first default - folder > new > legends > video settings > new legends

  default values for the Standard CEA-608

  and the program, the default monitor - key > legends display > settings > CEA-708 Standard

  Thus, with the legend, the program monitor's two default settings does not appear

  for me to have the subtitles to display in the program monitor, I had to 'match' standards of legend

  but, what happened to change the font size? Are you able to do? I thought I read in the legend help first, this type of policy, the size, was editable, so am I missing something?

• Export lack contrast compared to the program monitor

  First of all; I'm running on Windows 10 first CC 2015.1 and using a GPU Nvidia GeForce Ti GTX750. I use Dell U2412M twins IPS monitors that are calibrated using a Spyder4Pro.

  Any codec I export to it always seems to be the same discrepancy between what displays the program monitor (as well as the preview to export) and video after export. I used VLC, the native Windows! 0 Reader (film & TV), Quicktime and HTML5. I have all these images will appear less saturated and lacking in contrast. Play exported images on an other machine parts, even relatively faded image.

  I've been reading a lot of posts on this topic, seems to be a common problem, and try to find a solution that works, none of the suggestions I've read have solved the problem in my case.

  • I checked the settings in the Nvidia Control Panel, everything is configured to use the Nvidia settings. Returning to the video player settings makes it even more flat.
  • The only one who came close it is make some additional adjustments when exporting via the effects tab. However, it's something drastic workaround with the overcompensated preview.
  • It isn't just Quicktime that has this issue, it is in all areas.

  Y at - it a setting I have not spotted, either during the export process, or to set the display within the first I missed which would give me a parity between the preview that displays the monitor program and exit? This seems a little silly that the Visual tool used when the color correction and classification of images seems to be a rule in its own right...

  Below screenshot shows the same part of a few images, VLC on the left and the program within the first right monitor.

  

  Thanks in advance for any idea on this issue.

  After a little experimentation this morning, I think I can find the answer. I use some Look of Tom Antos LUTs as part of my process of dimming on my current project. Without these elements in the equation for the difference between the program monitor and images exported in VLC is almost the same makes no difference.

  It is interesting export a file from .cube since Lumetri color Panel with everything Tom Antos LUT applied and then using this file in the ranking. .cube seems to cure the problem. There must be either something wrong with the formatting of the original Tom Antos LUT where changes to the image have been applied in the program monitor but were then omitted in the rendering process. Tom Antos READ appeared in or an earlier version of the first, and there is a kind of incompatibility. Anyway, to re-record the LUT as a native first CC 2015.1 .cube file seems to fix the problem.

  I take this opportunity to thank R Neil Haugen and J. Simon for their valuable input

  I hope that don't cross is not all 'line in the sand' marking my own answer to my original question as the answer...

• Move objects in the program monitor

  Hi all

  If I'm not mistaken, you could (in CS5) to move files (images, text, etc.) around in the monitor of the program by clicking on them. It seems that this feature is missing in CS6. Can someone tell me if this is even possible? Since then, I have no idea how...

  Thanks in advance!

  If I'm not mistaken, you could (in CS5) to move files (images, text, etc.) in the right source monitor by clicking on it.

  This feature is available in the program monitor in CS5 and CS6.

  Try by double-clicking on image in the program monitor.

  Note:

  The Source monitor is located on the left,

  The program monitor is located on the right.

• The program monitor - I'm not seeing full clip during playback

  I am worried real!  After days of my life, import video and editing-and then trying to solve my problem to see only part of the fastener back playing in the program monitor that brought me to your site.  I spent hours looking at your posts (and indeed Adobe help pages) is trying to solve this problem and clearly my sequence settings initial (I think!) were wrong.  Maybe I can come back because I really don't know how these values are set correctly.  My original question please, if I finish my editing and then export this file, will I see again that part of the clips in the final version, or will I see all of the original clip?

  Some information:

  -Windows 7

  -Premiere Pro CS4

  -Program monitor setting is 'fit '.

  -aspect ratio 16:9

  -PAL (based in the United Kingdom)

  -Camcorder Sony HD - SR12E

  -1920 x 1080i HD

  Phew, hope this is enough Info for you "kick start" me!

  Thank you.

  Best regards, Doreen.

  From the looks of it reviews, the camera probably records in 1920 x 1080, so it is likely that you need the 1080i25 not anamorphic, preset (50i) AVCHD.

• The program monitor has yellow cast and red vertical lines when the video is paused

  The program monitor yellow cast and red vertical lines when the video is paused, I'm not reading. I'm not on external or monitor.

  Thank you!!!   works now! If all goes well there will be an update soon.

• When I stopped my project, in the program monitor window appears red and yellow bars... why

  When I stopped my project, in the program monitor window appears red and yellow bars... why?

  It is a problem with the captain to loosen then off material MPE.

  The next time you post a question: FAQ What information should I give...