Move objects in the program monitor

Similar Questions

• First CC 2015 - the program monitor turns black under a lot of effects

  So I worked on a video rather strongly. But it looks like a first or my GPU can not handle the amount of effects and layers because the program monitor keeps going black. Only solution is to restart the program, but if I change something or you move the timeline bar thing it just goes black again. Now she even at start up sometimes and it's really hard and boring editting. After he did this export is also impossible, it will give an error.

  I use Windows 7 and my GPU as a GTX750.

  I found a similar question on the forums but couldn't find anything useful. Is this a bug in the program?

  Run the types of effects that you use on this system as described, I'm not at all surprised that you get the results that you are. When the program "suffocates" past a certain point, it becomes totally wonky like that. How each of us "think that" this should work and how it does in reality are not necessarily related. I suggest to go to the Page of the Tweaker, where they made of actual testing of the systems in operation for years with Adobe video software, and look through their equipment.

  http://ppbm7.com/index.php/tweakers-page

  Neil

• Why my subtitles appear in the program monitor?

  Howdy!

  I'm doing some captions, body CC 2015, horrible on a video with an audio track.  I created the subtitle file, turn on the display of the legend on the program monitor and made sure legends I created (just a little far) are activated without a doubt too.  When I saw the legends in the monitor, I exported just the section captioned a. MOV file, with embedded captions once and once with them "engraved" on the video.  The subtitles are displayed, even if they are a bit of a mess (spaces, etc.), so I know that the first known legends.  So... why they do not appear in the program monitor?

  Any help appreciated!

  (- Jim 8 ^)

  Looks like that the first default - folder > new > legends > video settings > new legends

  default values for the Standard CEA-608

  and the program, the default monitor - key > legends display > settings > CEA-708 Standard

  Thus, with the legend, the program monitor's two default settings does not appear

  for me to have the subtitles to display in the program monitor, I had to 'match' standards of legend

  but, what happened to change the font size? Are you able to do? I thought I read in the legend help first, this type of policy, the size, was editable, so am I missing something?

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo

• EN: Selection/direct manipulation of clips in the program monitor

  If you accept this workflow improved, please add your own voice here www.adobe.com/go/wish.

  Improvement / FMR. *

  Short title of your desired function: direct selection of clips in the program for the change monitor

  How would you like the feature works?

  We should be able to directly monitor select a clip/active in moving/resizing/rotation program.  Even better would be the ability to SHIFT-click-select 2 or more items to move/scale/rotate them in tandem.

  Why is this feature important for you?

  The current workflow is convoluted/intuitive because it forces users to: 1) select a single element of amendment under the ICT in the scenario, 2) click on 'Motion' in the effect control window. (3) make the changes of the Motion to the ECW and/or the program monitor. (4) repeat steps 1 to 3 for all clips/additional titles in the program monitor that had to be changed in tandem.

  Although this feature request may require implementation of the 2 step, first of all, allowing direct selection of a single item and later allowing manipulation of selection/movement of 2 or more items at the same time, allowing one to select it directly in the monitor of the program for now would be a major step forward by finally allowing to change the attributes of the Motion 2 or several seeds at the same time.

  NOTE: For live clip selection work efficiently, including "selectable" of securities would need to be automatically limited to the dimensions of the text itself and not by default to the dimensions of the video settings as is currently the case, because otherwise, it would be impossible to directly select a clip in a title to equal video dimensions.

  2) click 'Motion' in the effect control window.

  Top tether can be selected by double clicking in the MP.

  If the undelaying clip is visuable and falling outside the bounding box of the element to overprint (in pips) you can double-click this also in the MP to get the rectangle encompassing.

• Impossible to move objects with the Selection tool

  So I just installed Illustrator CC, I have now on a trial license.  An hour ago, Illustrator suddenly began to refuse to move objects, while I'm in the selection tool.  I can move objects in the free transform.  I use shortcut keys a lot, so it's really slow me down.  I hit 'V' to click on and then move an object, and then it won't move. I get the error sound, but no dialog box appears to explain the error.

  Because I'm about to bite the bullet and start paying a hefty monthly fee for this program, at my trial runs out, that's enough aggravating circumstances.  Anyone has any ideas what can cause this?

  Looks like there could be a hidden modal dialog open. Hit the ESC key does nothing to release the objects?

• The program Monitor stops the video play list

  Hello

  I lose the composite image of video playback in the program monitor and the Source monitor after a few minutes. Audio is not yet.

  While the video plays, a random video color video screens near bar overall top 10 lines of pixels from the left edge to the right edge, then the video freezes on video, but you can still listen to. After awhile, an error message appears and the first to be forced closed. "NVIDIA OpenGL driver detected a problem with the display driver and can not continue." Error code: 3'

  It happens on all projects ranging from different resolutions and sizs from 30 seconds to 40 minutes. I suspect it has something to do with this error of the video and pilots communicate do not, but something causes of creation to arrive after the clip, played some time to display. I tried a few online solutions, others have had success with, but it doesn't have a lot of solutions fully documented for Windows users.

  This put all my projects on hold. Any ideas on how to solve this problem?

  Other clues:

  able to see reading through the other display modes such as waveform, vectorscope or rc

  be able to see the video images to change if manually move the playhead to blue

  Windows Media Player plays video files very well

  Closing the first to reopen the first time very well for a few minutes

  -----

  APPLICATION SETTINGS-

  Adobe Premiere Pro CS 5.5 (5.5.2)

  "Scratch disks": using separate SATA HDD

  Player settings: default player - adobe reader

  playback settings-

  The TV format conversion: software

  play and pause resolution: 1/2

  Displays the first field

  Project example settings-

  sequence parameters: pixel square AVCHD 1080i, 1920 x 1080 16:9 30 fps offset

  Video: I-Frame only MPEG

  Codec: MPEG I-Frame

  Frame rate: 29.97

  DETAILS OF THE SYSTEM-

  OS: Windows 7 Pro 64-bit

  RAM: 12.0 GB

  Memory RAM used (Task Manager): 3.8 GB/12

  Desktop theme: classic Windows (disabled aero)

  Intel Core i7 920 2.67GHz

  NVidia Quadro FX 3800, 1 GB GDDR3, pilot: 9.18.13.697

  3D disabled, allow material dealing with disabled, software to manage color settings, 60 Hz

  Screen: Asus VG278 native 1920 x 1080, using 60 Hz

  Display driver: generic PnP monitor (there is no real drivers for this monitor from the MFG)

  Card motherboard BIOS: no integrated graphics chip

  UPDATE:

  A day later, Nvidia released a new driver updated 03/05/2013.

  I now get a success rate of 100% of the program monitor reading, even on projects that had a few preliminary questions.

  Clean the pilot installation option / default settings

  Version of the driver (from NVidia Control Panel): 320,00 (03/05/2013)

  Version of the driver (from maps Windows display properties): 9.18.13.2000 4/18/2013

  That will do it!

• During the insert, the program monitor does not display the adjacent images

  On page 207 of the manual, it says:

  The program monitor can help you determine where to place a clip you add to a sequence. During a change of crush it, it displays the images

  in the adjacent sequence for the new clip head and tail. During a montage of the insert, it displays the adjacent images at the insertion point.

  When I drag a clip in the project Panel in a sequence, everything works as indicated in the manual. And when I drag the same clip with the program monitor, everything works still fine - but I don't see any adjacent items displayed. How to view?

  This works when you drag the movie, not the program monitor.

• Sequences are zoomed in the program monitor

  CS5 using on iMac with images shot on the 5DmkII.

  The images look good in the source monitor, but it is "zoomed" the on the program monitor. It is currently in the size 'fit' so I tried to play with the % and there is no resize the frame not the zoom. It also exports zoomed images like in the program monitor. It is my first project with my CS5 upgrade and on my new mac. Therefore, the default and I have not tested with the settings to change the view. How can I get the images in the program monitor to look exactly like he was shooting/source monitor? Thank you

  It sounds like you sequence settings do not match your settings to images. I'm guessing that the dimensions of your movie in pixels are much smaller than those of your element of film - that, when you put images (clip) in the sequence, only a piece of the clamp can be demonstrated in the relatively low sequence. You can either scale the clip to fit or do a sequence that matches the element- according to what is right for you.

  I recommend that you take the time to a path through the basic training for Premiere Pro.

• The program monitor shows only half of the picture

  Hi I'm new in preview, for some reason any when I open a photo in the program monitor, it shows that half of the picture, straight cut, in the Center (see below). I used to be able to see the entire photo and add the title and text to it.

  what setting should I bring back to normal?

  

  The first thing I would look at is the Sequence of parameters - click, on the top menu and ensure that the settings are - post a screenshot please. Your program monitor looks like a size extra-large, much wider than the standard ratio 16:9 HD or 4 K.

  The setting sequence is the basis for everything in your project - if it's wrong to start, all you will be affected later.

  Once you have a correct adjustment sequence you are satisfied, still images or video clips you want to use may not be the same dimensions/dimensions you chose for your sequence (such as 1080 p which is 1920 x 1080 pixels). You may have a still picture with larger dimensions, and then it will appear cropped as you currently see as its size does not match sequencing. Think of it as the photo was too big for a picture frame.

  As Jim mentioned, you can use the effect Adobe path across the source to fit, however it can be quicker and easier to simply with the right button of the image on the timeline, and then select define framework - this will automatically go to the media in your sequence.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• First CC - the program monitor goes black after a few minutes

  Hello

  
  I have the following problem:
  After 5-10 minutes, the program first DC monitor (2015) becomes black. The sequence and any remains intact, I can still do everything, but it does not show on the program monitor. When I restart first nothing is deleted or changed in any way that I myself.

  Technical information:
  I use Windows 8.1, 12 GB of RAM on 2 TB of free space on my hard drive and an Nvidia GeForce GTX 650.

  I would be very happy if anyone of you could help me with this problem because it's really in the way of my workflow to restart every few minutes.

  -Clara

  Thanks for all the help, but fortunately, the problem disappeared after the new update and I hope it stays like that.

• The program monitor randomly goes black

  First Pro CC uses for months and no problem.  All of a sudden, the program monitor goes black, then back over video transitions between clips, then goes black again.

  I have a HP workstation, with a processor of xenon 12-core, 32 GB RAM, 9 TB of disk storage hard (the first 1 TB flash), blazing fast dedicated with a ton of video memory video card.  It's worked wonders for 12 months and with all the other products Adobe (Photoshop, Lightroom) and hundreds of other programs.  I have NOT changed any video card or video processing settings.   I don't have a hardware problem - it is a problem with Adobe first Pro CC.

  I spent the maximum money on the hardware and the software more later/better (even though I hate paying a subscription for software).  And now this...   Moreover, I understand now and still not a bug, but when the screen goes black in a video software - well, it's like losing your direction while on the highway - it's sort of IMPORTANT - wouldn't you say Adobe?

  I'll scream at Adobe on Monday, but have a serious work that must be done this weekend.

  Is there any help that works?

  You use the latest versions (which numbers?) of Adobe CC?

  Try resetting the workspace.

  Try to update or restore your video driver.

  Try to remove the media cache files.

  Try resetting preferences.

• Where is the drop-down menu which will distribute choose me multi cam to open different cams in the program monitor?

  I have a project of two cameras that I want to use the multi cam editing option.  Cannot find how to get individual cams open in the program monitor I can start cutting between them.

  The key offers that option as well.

• All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  Thanks for your help. I work again InDesign brokedown and after a reboot, everything works perfectly fine.

• Format change in the program monitor

  Hello

  
  

  I don't know what happened - but somewhere over my editing that the program monitor has changed to a standing position (as I filmed with an iPhone stand). I can't find where I can change the settings back to 'normal' - if anyone can help a beginner in Premiere Pro?

  My only solution now is to start a new project and make the film...

  Louise

  

  It is the sequence settings that alter the size and shape of the program monitor. Take a look at the title sequence / sequence, the size of the pixel settings should be the same images of you, if you are on CC, you should be able to change the settings if necessary.