move a file/folder?

Similar Questions

• Move the file in the folder of the same name in AppleScript

  I had a problem with the script below. Basically, on the execution of the script, I want to create folders based on the name of the file and move the files in the files of autocorrelation. However, at the minute, that I'll have to choose the folder in which the script should run.

  Folder to choose a folder

  say application 'Finder '.

  located fileList to the name of every file in Folder with name extension is "m4v".

  end say

  the value point text delimiters to ".".

  Repeat with dittos in list of files

  get each text element of dittos

  masterFile defined in the point 1 of the result

  say application 'Finder '.

  create a new folder to Folder with properties {name: masterFile}

  move (each file from the folder Folder whose name contains masterFile) will cause

  end say

  end Repeat

  Ideally, I would like it to run automatically, but the folder is on an external hard drive. (\Volumes\Lacie\Movies). and I had problems to use the POSIX and 'alias' to properly re-create the path of the file desired.

  Any help would be greatly appreciated. Thank you!

  Hello

  You can try something like the AppleScript script which is a simple shell script wrapper.

  set d to (choose folder)'s POSIX path
  do shell script "/bin/bash -s <<'EOF' - " & d's quoted form & " 2>&1
  cd \"$1\" || exit
  shopt -s nullglob
  for f in *.m4v
  do
      m=${f%.*}
      [[ -d $m ]] || mkdir -p \"$m\" || continue
      mq=$(sed 's/[^[:alnum:]]/\\\\&/g' <<< \"$m\")   # quote meta characters for regex
      find -E . -depth 1 -type f -iregex '.*/'\"$mq\"'.[[:alnum:]]+$' -print0 | xargs -0 -J% mv % \"$m\"
  done
  EOF"
  

  For example, given that you choose/path/to/directory in the folder - source

  Input state:

  /path/to/directory/abc.m4v
  /path/to/directory/abc.txt
  /path/to/directory/abcd.m4v
  /path/to/directory/abcd.txt
  

  Status of the output:

  /path/to/directory/abc/abc.m4v
  /path/to/directory/abc/abc.txt
  /path/to/directory/abcd/abcd.m4v
  /path/to/directory/abcd/abcd.txt
  

  Briefly tested under OS X 10.6.8 but no guarantee of any kind. Please make sure that you have a full backup of the original files and directories before you run this kind of script.

  Good luck

  H

• How can I configure the folder in which a movie TS file stores the report?

  How can I configure the folder in which a movie TS file stores the report?

  Thank you

  Too bad... I found it

  Thank you

• I can not move the files to a folder in windows XP, only to copy them, and I get the windows error. This happens on any file or folder.

  I use XP Pro SP 3 and I'm having a problem with moving the files from one folder to another, no matter where the folder or files. If I try to move a file, it crashes and it cannot be opened or used. If I move a folder, then crashes all the contents of the folder, and I can't even open the folder, it tells me access is denied, this nothing else. If I try to delete the file, then I get a prompt to error telling me that the file or folder is not accessible, and that access is denied and "make sure that the disk is not full or write protected." If I try to move the files corrupt in another folder, this time I get the message "Unable to move or replace" the file in question and "make sure that the disk is not full or write protected." If it is a document as a text file, then I can open the file and there is a prompt indicating that access is denied. I can then use the text document and save something, but if I close the document and then try to reopen it, all the changes are lost.
  It is not this problem if I move the files to an external device or disk drive.
  I am running as an administrator.
  Right now, if I need to move a file, I copy it to its destination, which is possible and then delete the original file. With the help of a release program was the only way I could delete these files, which could no longer be used.

  Hello Closrapexa, welcome.

  1. do you have this problem started recently?

  I recommend trying the system restore to bring the system back to a State before the problem started. Try this:

  1. click on START

  2. click on "all programs".

  3. click on "Accessories".

  4. click on "system tools."

  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Permissions do not update every time that a user moves a file from one folder to another in the Windows XP computer.

  Original title: folder permissions to move or copy.

  I have a problem that I'm sure has a simple explanation but I don't know.  I have a folder in the tree that whenever a user moves a file from one folder to another, the permissions do not update.  Yet if a user copies the folder to the same location, permissions to update as expected.  This only happens with XP.  If I try with Win 7, if the user moves or copies, update permissions.

  Has anyone seen this or have an explanation?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• How copy/paste or copy/move a file to another folder in Windows XP

  I need to copy/paste or copy/move the files from one folder to program existing to another folder.

  Use the movement commands to copy do?

  Hi Jimmyjack1941,

  I suggest you to read the following articles for more information.

  These are the items if you use the Windows Explorer to perform operations:

  To copy a file or folder

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fcab_copy_file.mspx?mfr=true

  To move a file or folder

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fcab_move_files.mspx?mfr=true

  You can follow these commands to move and rename the file or folder using the command prompt:

  Moves files and renames files and directories.

  To move one or more files:
  MOVE [/Y | /-Y] [drive:] [path] file1 [,...] destination

  To rename a directory:
  MOVE [/Y | /-Y] [drive:] [path] dirname1 repert2

  [drive:] [path] file1	Specifies the location and name of the file or files you want to move.
  destination	Specifies the new location of the file. Destination can consist of a drive letter and colon, a directory name, or a combination. If you move a single file, you can also include a file name if you want to rename the file when you move it.
  [drive:] [path] dirname1	Specifies the directory you want to rename.
  repert2	Specifies the new name of the directory.
  /Y	Deletes the request for confirmation that you want to replace an existing destination file.
  Y	Causes of request for confirmation that you want to replace an existing destination file.

  The switch /Y may be present in the COPYCMD environment variable. This can be derived with / y on the command line. Default value is quick to replace unless is running of command MOVE within a command script.

  Example:

  move c:\windows\temp\*.* c:\temp

  Move the temporary directory c:\windows\temp files in the root, this is of course assuming you have the windows\temp folder.

  Note: Microsoft does not move the files/folders installed application.

  Hope this information helps.

• Move multiple files from one folder to another in SkyDrive?

  How can I move multiple files from one folder to another in SkyDrive?  When I click on a file, & then use CTRL-click on another file, it moves to that one.  Can I select multiple files & copy or move or rename on PC?

  For now - not.  SkyDrive Wave5 or anyone should have this ability when it is fully released.

  http://www.LiveSide.NET/2011/09/06/SkyDrive-wave-5-to-finally-support-multiple-files-selection/

  (Read and also read comments on things, you might be able to use now to accomplish what you want).

• Moving files: I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?

  I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?

  I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?

  Hello

  Go t the location where you want to create the new folder, right-click and select new/folder. Name the folder.

  Go to where the files, select the files and then use the right mouse button to drag the files into the new folder. When you drop the file, a pop-up menu, select the Move option.

  Let us know if you have any other questions.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Can you move a file from one folder to another without losing the non-destructive updates

  Hi my hard drive is organized so that each of the topics, for example Le Mans 2006, takes place in a separate folder, with a number of subfolders, as negative that hold my files raw which are never affected, in turn, processed, etc. Twenty top. So I move my files from subfolders. When I try to do that in LR, I get a warning message that seems to say that if I move the file I lose the details of non-destructive changes. If this is true then I can see LR add to my workflow, not improving it. Is it possible to get a shift of folder in the catalog without losing data?

  Hi ovonel

  You will lose not no editing, as you did on the picture when you move the File.You can always undo any changes made to your image (non-destructive editing) in the history panel in the develop module. The content of your Raw file is not affected.

  The warning below is just saying that Ctrl (command) + Z will not void. . It moves the file to the original location too. (of course, you can move the file back to the previous location)

  

  Hope that helps

  Concerning

  ~ Assani

• odiFileMove - move a file from one folder to another

  Hello world
  
  I am bleow than some info from excel files and once it has properly loaded or not, I want to move this file to another file.
  
  "It 's" move, but when I review the trace on the operator I get an error when you use the odiFileMove, but when I check the folder where I was suppoused to move the file I see here and on the one source as well.
  
  The error I get is "Unable to delete file < Path... >" but I don't want to delete it, I want to just move :-).
  
  The command I use is: OdiFileMove "-FILE = < Path... >" "-TOFILE = < Path... >" "-OVERWRITE = YES" "-CASESENS = NO '"-RECURSE = YES.
  
  Any ideas?
  
  I really appreciate your help and your advice.
  
  Best regards
  
  J_ORCL

  Hello

  1. you can generate the script for a package by right-clicking on this package and choose 'produce a scenario '.
  2. once the script is created, create another package.
  3. in this package, just drag and drop the script created in step 1
  4. then put utility OdiFileMove

  I hope this helps.

  Thank you
  Fati

• Move icon missing in the files downloaded in the clouds, so how do I move a file in a folder?

  Move icon missing in the files downloaded in the clouds, so how do I move a file in a folder?

  If you are on the page of files where all your files and folders are listed, then there are two ways to move:

  The thumbnail (can only move a file or folder at a time):

  • Click the triangle to display under the thumbnail.
  • In the options that appear, select the Move button.

  

  The list view (can move several files and folders):

  • The check boxes for the files and folders that you want to move.
  • The menu bar at the top left changes has a Move button.

  

• My script to move .indd files in a folder does not

  Hello

  I've been doing a bunch of scripts to clean my desk and put certain types of files in specific folders... All work except for my InDesign one.

  Can look at the code and maybe tell me why... basically, it makes a folder on the desktop called InDesign file, if it does not exist, and then it is supposed to move any file that ends in indd to it. Thank you

  property inDesignFolder : 'InDesign desktop.

  say application "Finder"

  If not () is file inDesignFolder) then do new file with the properties {name:inDesignFolder}

  go ()each document file which like ends by "indd") to file inDesignFolder

  end tell

  If someone can tell me why it does not work, I understand that.

  Thank you

  Babs

  > This may not more work under OS X

  Law - creator codes are not used on 10.6. But before that, they have caused problems because they were often not present for files that come from sources non - Mac OS.

• "The file is too large for the destination file system? How to move this file to another folder with this error?

  Working with Windows 7. I'm trying to move files to other readers. . What is the work around whan "" the file is too large for the destination file system"is the error messages. Can it be fixed so you can move the files

  Either there is not enough space on the destination or the size of the file is larger than the destination system can accept, for example FAT32 cannot have a file size more than 4 GB.

• How to move a file from one folder to another with javascript?

  In my script I have batch files. Copy and edit files when necessary.

  There is a record that should be moved from its location is given in the entry, that is assigned dynamically via metadata in the file name.

  All the other files, I go through registration of places and the photoshop manipulations, however, this file itself must not be opened by photoshop, but I was hoping there was still a way to deal with it in the same script.

  
  Or through which the javascript code needed to move the file from within the photoshop jscript instance, or by running a shell script that I can pass variables too. I'm not as certain about the possibility for these (passing variables this way), and I found no documentation for the former.

  Documentation for the file and the file API found in the JavaScript Tools Guide which can be found on adobe.com.

  There is no a File.move method (). You will need to use File.copy () and File.remove ().

  An alternative is to use the app.system () call and pass it to a shell command that made the trip.

• importing photos in file/folder

  Mac osX to yosemite; Tried to import photos from an SD card to the folder. they came last file imports, but couldn't move photos to a proper file/folder.

  How you import?

  Using iPhoto import feature?

  Using the import of Photos feature?

  using another method?

  There is a separate instance for iPhoto (in iLife)

  iLife

  and Photos (in OSX because it comes with os x)

  Photos for Mac