Similar Questions

• How to turn the notifications by e-mail to connect VPN Site to Site on ASA?

  How to activate the VPN Site to Site connection e-mail notifications?

  Maybe it's possible with the event Manager?

  Hi Mario

  I think this could work depending on your intent:

  logging list email level notifications class vpnlogging list email level notifications class vpnc!logging mail emaillogging from-address logging recipient-address  level notifications

  Cordially Véronique

• AnyConnect VPN connection VPN site access to remote site

  I need our VPN users to gain access to our remote site (Site to Site VPN), there is no problem to access the main site through the VPN. Crypto map sites have the VPN pool in the card encryption.

  Any ideas?

  Here is the main Site (ASA5520) config inside 192.168.50.0

  crypto_vpn_remote-site access-list extended ip 192.168.50.0 allow 255.255.255.0 172.16.1.0 255.255.255.0

  IP 192.168.99.0 allow Access-list extended site crypto_vpn_remote 255.255.255.0 172.16.1.0 255.255.255.0

  inside_nat0_outbound to access extended list ip 192.168.50.0 allow 255.255.255.0 172.16.1.0 255.255.255.0

  access extensive list ip 192.168.99.0 inside_nat0_outbound allow 255.255.255.0 172.16.1.0 255.255.255.0

  Remote site (PIX 515E) inside 172.16.1.0

  access-list crypto_vpn_main-site permit ip 172.16.1.0 255.255.255.0 192.168.50.0 255.255.255.0

  access-list crypto_vpn_main-site permit ip 172.16.1.0 255.255.255.0 192.168.99.0 255.255.255.0

  access-list sheep permit ip 172.16.1.0 255.255.255.0 192.168.50.0 255.255.255.0

  access-list sheep permit ip 172.16.1.0 255.255.255.0 192.168.99.0 255.255.255.0

  VPN (AnnyConnect) 192.168.99.0

  On the main site, pls make sure that you have 'same-security-traffic permit intra-interface' active.

  Also, if you have split tunnel configured, please also make sure that he understands the Remote LAN (172.16.1.0/24).

  Hope that helps.

• VPN site to Site 5506 X

  How many sessions/users can go on a 5506 X with a dry more than the license?

  Any involved a VPN site-to site a 5506 a 5515 X X?  Or is this done as I have done in the past with of 5505?

  Thank you

  Pete

  Basic 5506 license not not limit the number of Interior hosts as did the former 5505. So, in this respect, you are not constrained.

  You do not have a limit on the number of connections VPN site to site on the 5506. Are those that fall of 'other VPN peers' are limited to 10 (licenses) or 50 (security more)-a site separate VPN tunnels. Reference.

• VPN site-to-site with pppoe ADSL connection

  Dear

  I would like to know - is it possible to connect two 5505 ASA in VPN site-to-site with 1 site using the pppoe ADSL connection?

  A (static IP) site

  Site B (ADSL pppoe, DHCP)

  Site has < site="" to="" site="" vpn=""> > Site B

  Best regards

  Alan.

  Configuration of site B should be the same as all the other side than peers with static end.

  The different configuration would be on Site A as he will accept a VPN to a dynamic counterpart.

  Unfortunately, I have no configuration example to show you on ASDM.

• How to end a vpn connection from site to site on ASA 5510

  Hi guys,.

  I would like to know if there is a command that I can use to break a connection from site to site and restart it whenever I want.

  I don't want to use the close command since I use the specific interface as an exit point on the internet.

  In this case, you can configure just one incomplete crypto map entry, for example: just keep 'peers set' not configured until you establish the vpn tunnel, and then add the command "set by the peers.

  If you disable the tunnel, just remove the 'set by the peers' command for this particular VPN tunnel.

• Make the remote web server accessible via VPN Site to website

  We have two test sites that are connected by a tunnel IPSEC VPN site-to-site (hosted on a SAA each site) over the Internet. We are trying to set up an environment to test two web applications running side by side. Two web servers are running on the Site of Test 1. We don't have the same public IP available at each site.

  To address the public site 1 unique IP address restriction, we try to install ACL and NAT rules to have 2 Site accept traffic from the internet and send it on the site to the other tunnel. So 1 Web server would accept the ASA 1 internet traffic and Web Server 2 accept traffic from ASA 2 to the other site. Here's a network diagram:

  

  We have difficulties to get this configuration works correctly. Please note that the network 192.168.3.0/24 clients are able to access the servers Web1 and Web2. This question seems to be due to our NAT configuration. This is the type of error, we see on the two firewalls:

  Asymmetrical NAT rules matched for flows forward and backward; Connection for tcp src outside:4.4.4.4/443 dst outside:192.168.1.10/443 refused due to path failure reverse that of NAT

  Our situation seems similar to this post: https://supportforums.cisco.com/thread/2242230

  Any help would be appreciated.

  Hello

  What Karsten said above is true. While it is possible and works, it also means that the configuration is a little more complex to manage. I have done no such features in a real-life network environment and have always used additional public IP addresses on the local site when a server is hosted.

  If you want to continue to move forward with this so here's a few points to consider and the configurations that you need.

  First off it seems to me that the other server will be organized by the local Site 1 so a simple static PAT (Port Forward) must manage the Site 1.

  network of the WEB-HTTP object

  host 192.168.1.10

  NAT (inside, outside) interface static tcp 443 443 service

  And if you need TCP/80 also then you will need

  network of the HTTPS WEB object

  host 192.168.1.10

  NAT (inside, outside) interface static service tcp 80 80

  Now, 2 Site will naturally a little different that the server is hosted on the Site 1 and Site 2 is the public IP address used to publish the server on the external network.

  Essentially, you will need to configure NAT that both makes dynamic PAT for the addresses of the source of the connection to your server Web 2, but also makes the static PAT (Port Forward) for the IP address of the Web Server 2. Additionally, you have to set the area of encryption on the Site 1 and Site 2 to match this new addition to the L2L VPN connection.

  Unless of course you use an existing IP address on the field of encryption in the dynamic translation of PAT for the source address. In this case, it would take no change VPN L2L. I'll use that in the example below.

  The NAT configuration might look like this

  service object WWW

  destination eq 80 tcp service

  service object HTTPS

  destination eq 443 tcp service

  the object SOURCE-PAT-IP network

  host 192.168.3.254

  network of the WEB-SERVER-2-SITE1 object

  host 192.168.1.11

  NAT (outside, outside) 1 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service WWW WWW

  NAT (outdoors, outdoor), 2 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service HTTPS HTTPS

  So, essentially, NAT configurations above should ake 'all' traffic coming from behind 'outside' interface intended to "outside" "interface" IP address and translate the source to ' SOURCE-PAT-IP ' address and untranslate destination to "WEB-SERVER-2-SITE1".

  Make sure that the IP address chosen (in this case 192.168.3.254) is not used on any device. If she is then replace it with something that is not currently used in the network. Otherwise, configure an IP address of some other subnet and include in the L2L VPN configurations on both sites.

  Unless you already have it, you also have this configuration command to activate the traffic to make a U-turn/pin on the ' outside ' of the Site 2 ASA interface

  permit same-security-traffic intra-interface

  Hope this helps

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary.

  -Jouni

• VPN site to Site with restrictions (vpn-filter)

  VPN site to site, I installed and it works fine and two site can meet but I question after the vpn enforcement - run under Group Policy

  restrict users in the local site for dial-up networking with specific tcp ports, the vpn does not not like after order question «sh l2l vpn-sessiondb»

  This works but users can't access something in the remote site

  Note > after rising online in ACL at the end with this

  US_SITE ip access list allow a whole

  new to works well again

  example of a line of Access-List

  US_SITE list extended access permit tcp host 10.68.22.50 host 192.168.10.23 HTTP_HTTPS object-group
  US_SITE list extended access permit tcp host 10.68.22.50 host 192.168.10.24 HTTP_HTTPS object-group

  local network: 10.68.22.50

  remote network: 192.168.10.24

  is that correct or not?

  attributes of the strategy group x.x.x.x
  value of VPN-filer US_SITE

  tunnel-group General y.y.y.y
  x.x.x.x by default-group-policy

  Note: allowed sysopt active vpn connection

  The syntax on ACL that is used as a vpn-filter is different from what is normally expected. These VPN filters is not a direction, it should be noted the traffic we want to allow incoming and outgoing of the VPN in an ACL. The syntax for this is:

  access-list X permit/deny REMOTE-DEFINITION LOCAL-DEFINITION

  Example: You want to allow local users to access the RDP on the remote site:

  access-list VPN-ACL permit tcp host 192.168.10.24 eq 3389 10.68.22.0 255.255.255.0

  Disadvantage: This is all really confusing, and you can't afford things like Ping in one direction.

• Problem with VPN Site-to-Site between RV215W and ASA5510

  The RV215W is intended to connect a new branch via 3G, but fail.

  But when connected to the internet via a cable modem VPN works.

  I have set up with the FULL domain name and remote ip address.

  Please help me soon as soon as you can.

  Thaks a lot.

  Henriux2412.

  Dear Henry;

  Thank you to the small community of Support Business.

  I doubt that this VPN site-to-site is compatible with the USB modem broadband Mobile 3 G, but I have when even suggest to verify that the Status field of the map will show your mobile card is connected (status > Mobile network). I've seen a similar problem with a Verizon USB modem where the solution was to change a few settings in their access Manager software ("NDIS Mode - connect manually" has been selected and change this option to "Modem Mode - connect manually fixed), but if this is not your case then I suggest you to check with your service provider about supported VPN site to site on the WAN configuration.

  Except that I advise you to contact the Small Business Support Center for more information on this subject, although I don't think they will support

  https://supportforums.Cisco.com/community/NetPro/small-business/sbcountrysupport

  https://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

  Do not hesitate to contact me if there is anything I can help you with in the meantime.

  Kind regards

  Jeffrey Rodriguez S... : | :. : | :.
  Support Engineer Cisco client

  * Please rate the Post so other will know when an answer has been found.

• Problem with VPN Site-to-Site between RV215W and ISA550

  Hello

  I tried to set up a site connection to site between a RV215W and an ISA550 for a whole day without success now, could someone help me with an example of configuration?

  I'm new to this kind of configurations and VPN Options of two routers seem very different, with IKE an IPsec on the RV, IPsec and IKE policies, transform the policies on the ISA.

  Outputs the Wizards from Site to Site are not either.

  The RV215W is intended to connect a new branch via 3G and that it doesn't have a fixed IP address.

  Subnet the ISA is 10.10.11.0/24 VR 192.168.100.0/24

  Thanks for any help in advance!

  T

  Hello

  I check all the screenshots and you must:

  -Disable the PFS on ISA500 (screenshot of ISA500 of a second)

  -Enable IPsec on ISA500 (first screenshot of ISA500)

  -Activate the VPN on RV215W (first screenshot of RV215W) policy

  And iniate the RV215W VPN

  I hope that this step will fix the problem

  Thank you

  Mehdi

• Tunnel VPN site to Site with 2 routers Cisco 1921

  Hi all

  So OK, I'm stumped. I create much s2s vpn tunnels before, but this one I just can't go there. It's just a tunnel VPN Site to Site simple using pre-shared keys. I would appreciate it if someone could take a look at our configs for both routers running and provide a comment. This is the configuration for both routers running. Thank you!

  Router 1

  =======

  Current configuration: 4009 bytes

  !

  ! Last configuration change at 19:01:31 UTC Wednesday, February 22, 2012 by asiuser

  !

  version 15.0

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  SJWHS-RTRSJ host name

  !

  boot-start-marker

  boot-end-marker

  !

  !

  No aaa new-model

  !

  !

  !

  !

  No ipv6 cef

  IP source-route

  IP cef

  !

  !

  DHCP excluded-address 192.168.200.1 IP 192.168.200.110

  DHCP excluded-address IP 192.168.200.200 192.168.200.255

  !

  IP dhcp POOL SJWHS pool

  network 192.168.200.0 255.255.255.0

  default router 192.168.200.1

  10.10.2.1 DNS server 10.10.2.2

  !

  !

  no ip domain search

  IP-name 10.10.2.1 Server

  IP-name 10.10.2.2 Server

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  Crypto pki trustpoint TP-self-signed-236038042

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 236038042

  revocation checking no

  rsakeypair TP-self-signed-236038042

  !

  !

  TP-self-signed-236038042 crypto pki certificate chain

  certificate self-signed 01

  30820241 308201AA A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030

  8B1E638A EC

  quit smoking

  license udi pid xxxxxxxxxx sn CISCO1921/K9

  !

  !

  !

  redundancy

  !

  !

  !

  !

  crypto ISAKMP policy 10

  md5 hash

  preshared authentication

  ISAKMP crypto key presharedkey address 112.221.44.18

  !

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac IPSecTransformSet1

  !

  map CryptoMap1 10 ipsec-isakmp crypto

  defined by peer 112.221.44.18

  game of transformation-IPSecTransformSet1

  match address 100

  !

  !

  !

  !

  !

  interface GigabitEthernet0/0

  192.168.200.1 IP address 255.255.255.0

  automatic duplex

  automatic speed

  !

  !

  interface GigabitEthernet0/1

  Description wireless bridge

  IP 172.17.1.2 255.255.255.0

  automatic duplex

  automatic speed

  !

  !

  interface FastEthernet0/0/0

  Verizon DSL description for failover of VPN

  IP 171.108.63.159 255.255.255.0

  automatic duplex

  automatic speed

  card crypto CryptoMap1

  !

  !

  !

  Router eigrp 88

  network 172.17.1.0 0.0.0.255

  network 192.168.200.0

  redistribute static

  passive-interface GigabitEthernet0/0

  passive-interface FastEthernet0/0/0

  !

  IP forward-Protocol ND

  !

  no ip address of the http server

  local IP http authentication

  IP http secure server

  !

  IP route 0.0.0.0 0.0.0.0 172.17.1.1

  IP route 112.221.44.18 255.255.255.255 171.108.63.1

  !

  access-list 100 permit ip 192.168.200.0 0.0.0.255 10.10.0.0 0.0.255.255

  !

  !

  !

  !

  !

  !

  control plan

  !

  !

  !

  Line con 0

  Synchronous recording

  local connection

  line to 0

  line vty 0 4

  exec-timeout 30 0

  Synchronous recording

  local connection

  transport input telnet ssh

  !

  Scheduler allocate 20000 1000

  end

  =======

  Router 2

  =======

  Current configuration: 3719 bytes

  !

  ! Last configuration change at 18:52:54 UTC Wednesday, February 22, 2012 by asiuser

  !

  version 15.0

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  SJWHS-RTRHQ host name

  !

  boot-start-marker

  boot-end-marker

  !

  logging buffered 1000000

  !

  No aaa new-model

  !

  !

  !

  !

  No ipv6 cef

  IP source-route

  IP cef

  !

  !

  !

  !

  no ip domain search

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  Crypto pki trustpoint TP-self-signed-3490164941

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 3490164941

  revocation checking no

  rsakeypair TP-self-signed-3490164941

  !

  !

  TP-self-signed-3490164941 crypto pki certificate chain

  certificate self-signed 01

  30820243 308201AC A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030

  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

  EA1455E2 F061AA

  quit smoking

  license udi pid xxxxxxxxxx sn CISCO1921/K9

  !

  !

  !

  redundancy

  !

  !

  !

  !

  crypto ISAKMP policy 10

  md5 hash

  preshared authentication

  ISAKMP crypto key presharedkey address 171.108.63.159

  !

  86400 seconds, duration of life crypto ipsec security association

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac IPSecTransformSet1

  !

  map CryptoMap1 10 ipsec-isakmp crypto

  defined by peer 171.108.63.159

  game of transformation-IPSecTransformSet1

  match address 100

  !

  !

  !

  !

  !

  interface GigabitEthernet0/0

  no ip address

  automatic duplex

  automatic speed

  !

  !

  interface GigabitEthernet0/0.1

  encapsulation dot1Q 1 native

  IP 10.10.1.6 255.255.0.0

  !

  interface GigabitEthernet0/1

  IP 172.17.1.1 255.255.255.0

  automatic duplex

  automatic speed

  !

  !

  interface FastEthernet0/0/0

  IP 112.221.44.18 255.255.255.248

  automatic duplex

  automatic speed

  card crypto CryptoMap1

  !

  !

  !

  Router eigrp 88

  Network 10.10.0.0 0.0.255.255

  network 172.17.1.0 0.0.0.255

  redistribute static

  passive-interface GigabitEthernet0/0

  passive-interface GigabitEthernet0/0.1

  !

  IP forward-Protocol ND

  !

  no ip address of the http server

  local IP http authentication

  IP http secure server

  !

  IP route 0.0.0.0 0.0.0.0 112.221.44.17

  !

  access-list 100 permit ip 10.10.0.0 0.0.255.255 192.168.200.0 0.0.0.255

  !

  !

  !

  !

  !

  !

  control plan

  !

  !

  !

  Line con 0

  Synchronous recording

  local connection

  line to 0

  line vty 0 4

  exec-timeout 30 0

  Synchronous recording

  local connection

  transport input telnet ssh

  !

  Scheduler allocate 20000 1000

  end

  When the GRE tunnel carries your traffic to private ip range, your ACL must contain address of the host of point to point the IPSec tunnel.

  Since then, both routers are running EIGRP in the corporate network, let the EIGRP Exchange routes via GRE tunnel, which is a good practice, rather than push the ip ranges private individual through the IPSec tunnel.

  Let me know, if that's what you want.

  Thank you

• VPN site to Site stuck in IKE Phase 1 - MM_WAIT_MSG2

  We do a vpn site-to site. The tunnel has worked before, but after some discussions about the location of ASA_Receiving (no change in config for asa made, this asa is directly connected to the internet) will not return the tunnel upward. The devices can ping each other without problem.

  It is a vpn L2L, I wonder if the guy saying user is related to the issue?

  ASA_Initiator

  IKE Peer: 71.13.xxx.xxx
  Type: user role: initiator
  Generate a new key: no State: MM_WAIT_MSG2

  ASA_Receiving

  # show crypto isakmp his

  There is no isakmp sas

  Hey,.

  is the remote end ASA as well?

  If so, the capture below on the ASA:

  capture capout match udp host host interface

  The tunnel gets stuck on MM_WAIT_MSG2 for 2 reasons:

  1 either a problem with the policies of the phase 1 of the remote end or

  2 UDP 500 is not reaching the remote end or the remote end sends the packet UDP 500 back and can't the ASA local.

  Concerning

• 800 series vpn site to site?

  Hello, I have a brand new pair of 851w with ios version 12.4 (15) T7. I can't seem to get a vpn site-to set up, I was able to use these seccessfully 800 series in the past. I have stripped the configs down to the essentials and still cannot be established.

  When I do a crypto session see the everything seems okay, but the connection is "down".

  I'm not 100% sure on my cryptographic transformation

  "crypto ipsec transform-set esp - aes AES-SHA-compression hmac-sha-esp computer-lzs" I'm not sure that the 800 series will support encryption or if I should use something else.

  I have attached the configs.

  You must change the configuration of: -.

  the IP nat inside source 1 interface 4 overload list

  TO

  IP nat inside source overload map route interface FastEthernet4 sheep

  HTH >

• VPN site to Site VPN dynamic + XAUTH Catch 22

  Hello world

  I'm working on a PIX 515e with 6.3 (3) 132 installed.  I'm having a problem of setting up a new VPN connection from site to site with a dynamic VPN are already in place.

  The problem is that the card encryption has xauth specified using the command 'authentication of customer card crypto'.  As it is my understanding that it is not possible to assign several cryptographic cards on the same interface, the new tunnel from site to site I am creating also requires xauth because its definition is under the same encryption card - which is a problem because the remote device does not support.

  Is there a way around this issue, or is the only thing we can do is to disable xauth and reconfigure endpoint on the other end of the dynamic connection?

  Thanks in advance

  Excerpt from the configuration:

  map mymap 10-isakmp ipsec crypto dynamic dynmap

  MYmap 22 ipsec-isakmp crypto map

  correspondence address card crypto mymap 22 122

  card crypto mymap 22 set counterpart x.x.x.x

  card crypto mymap 22 transform-set 3des

  client authentication card crypto mymap AuthOutbound

  mymap outside crypto map interface

  Considering that:

  TUN 22 ipsec-isakmp crypto map

  crypto TUN 22 card matches the address 122

  card crypto TUN 22 set counterpart x.x.x.x

  card crypto TUN 22 value transform-set 3des

  TUN interface card crypto outside

  Might work, except the interface card switching to TUN crypto map would break the dynamic VPN.

  Hello

  The dynamic encryption card normally requires XAUTH for VPN clients.

  If you want to set up a tunnel from Site to Site and avoid XAUTH on this tunnel, you can do the following:

  # address x.x.x.x No.-xauth isakmp encryption key

  The idea is to disable XAUTH for each peer Site to Site specific in this way (dynamic clients will continue to work with XAUTH).

  Federico.

• VPN Site to Site Secret shared and can co-exist RADIUS authenticated VPN?

  Hello

  I have a setup VPN site to site between two offices on 515Es PIX (v.6.2 software) and has recently added a vpngroup/shared secret based VPN remote access to one of the offices. Given that just forced me to add a number of different policies to my existing crypto card, it was a plant direct and easily implemented. For more security, I want to use a RADIUS server to give to each remote user their own connections and profiles rather than a group on all password is configured. To do this, however, it seems that I have to add the following additional commands to my existing crypto card:

  client configuration address map mymap crypto initiate

  client card crypto mymap RADIUS authentication

  These do not correspond to the policy number (my site-to-site is 10, and remote access policy is political 20), so I don't know what the effect would be if I added the. It would cause my connection from site to site for authentication RADIUS request (a very bad thing)? If so, do I need another interface to bind a new encryption card to? The answer to this would be greatly appreciated!

  Also, if anyone knows an example configuration for a similar configuration, I can look at, please let me know! Thank you.

  -A.Hsu

  For the site to site connection, you change line isakmp keys and add the parameters of "No.-xauth No.-config-mode" at the end of this one, which tells the PIX not to do the auth RADIUS or assign an IP address, etc. for the specific site-to-site tunnel.

  Example of config is here:

  http://www.Cisco.com/warp/public/110/37.html

  Note that there is no command options I have just said, I just sent an email to the web guys to fix this. Basically, your config will look with the options "No.-xauth No.-config-mode" on the line «isakmp x.x.x.x key...» "for LAN-to-LAN tunnel.