Move the exchange 5.5 Server

Similar Questions

• move the apps on new server level

  
  Hi all

  Here we have 2 node Installation

  node 1: apps + db (db + cm)

  node 2: applications (web + forms)

  requirement is that we want to move the node 2 to new server os team wants to do an interview on node 2.

  is it possible to move only the node 2 (web + forms) again thanks to n sync server clone faster with existing and node cm db or we must go entire installation to new servers

  Links n MOS doc ID much appreciated

  versions:

  apps: 11.5.9

  DB: 9.2.0.8

  OS: RHEL 4

  Thank you

  Hafiz

  Yes it is possible and all you need to do is the following (you need not move node 1):

  -Install the operating system on the new server + pre - req packages and OS software

  -Preclone run on node 2

  -Termination of the application on node 2 and copy the files to the new node

  -Postclone run on the new node

  -Clean up FND_NODES and run the automatic configuration

  Oracle Applications Installation update, version 11i (11.5.10.2) (Doc ID 316806.1)

  Cloning Oracle Applications Release 11i with rapid Clone (Doc ID 230672.1)

  How to get a clean auto-configuration environment? (Doc ID 391406.1)

  Thank you

  Hussein

• Best way to move the file from one server to another VM

  Hello

  We will soon be moving on ESX3.5 45 virtual machines on the same network to ESX4.0 on another network.  What is the best/best way to move these files?  The original network, the files are stored locally on the server and run ESX3.5i.  However, on the other network, data warehouses are on a San and the ESX hosts are in a cluster.  Both networks are in the same physical location and can meet.  I guess I can do it from the CLI of in ESX?

  Thank you

  If you have two hosts in vCenter Server, you can move the virtual machines without Storage vMotion (Powered-off VMs).
  It is not necessary that both hosts have access to the San using cold migration.

• Move the license to new server

  We are biking on the old servers and you need to move the license vsphere from a server that puts us out of service to a new server.

  I put the new Server clustered in Eval mode and moved all the guests to him. The old server has more no guests and is ready to be removed from the cluster, how to I release the license on this subject so I can apply it to the new server?

  Thank you

  Eric

  Yes, you should completely remove it form your vCenter - perpendicular removed once the client vSphere ESX Server environment and close. Once removed, you can apply the license on the new ESX Server-

  If you have followed the procedure to apply the license on the ESX Server properly - close off the vSphere client and reopen the client and the warning of evaluation will be gone

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• How to move the vm for VMware Server ESXi

  I have a host with ESXi 3.5 and I want to move virtual machines to a different machine with VMware Server 2.

  Any idea how to do to move the virtual machine?

  Thank you

  You can use VMware Converter (free copy).  When you install it convert you a machine and select the Virtual Machine of VMware Infrastructure as the virtual source then Machince as destination.

• Move the database on new server

  I've hava on Solaris 10.5 10.2.0.1.0 Oracle and wants to move to Oracle 11.1.0.1.7 on the same platform, but another server using exp/IMP.
  
  I'm not aware of any other precondiction that I need to meet previously on this exp/emp. If there is a prerequisite, I'd appreciate if you can share it.
  
  The database must stop
  I have to copy all the files from the old database
  
  Here is my file by:
  

  UserID = system / *.
  file = /h/share/database/db/backups/CBEXP.dmp
  Journal = /h/share/database/db/backups/CBEXP.log
  Statistics = none
  Full = y

  Albert Zaza wrote:

  The new database (11.1.0.0.7) will take the same format as old (10.2.1) and thus exp and experienced will do the job.

  No, in fact old exp/imp in 11g is not supported.

  So I have to create a 10.2.0 of databases, import the dump files. When all is done, I can only upgrade to 11g

  I do not understand you now, you actually have the database in 10.2.0 so take logical backup using expdp and create the new database 11 g then import it.

• What is the best way to move the data from the app and Server data structures?

  Hi guys,.
  
  I developed my application locally with Apex 4.2 and Oracle 11 g XE on Windows 7. Not far away, it is time to move the application to a server Oracle Apex. I guess that Exim is the way to go app. But what about the APA tables and data (tables/as 'customer' and 'account' created specially for the application)? I've been using a modeling tool, so I can run a DDL script to create the database server data structures. What is the best way to move the application data on the server? Is it possible to move the structures and data in a single process?
  
  Thank you
  Kim

  There is probably another way to get here, but in Developer SQL, on the navigation tree, expand objects until your table, right-click, and then click EXPORT... you will see all the options. It is a tedious process and it sucks IMO, but yes, it works. This is zero especially because 1) it's a table at a time, 2) If your data model is robust and has constraints and sequences and triggers, then you will need to disable all for the insert and we hope you can re-enable constraints, etc. without hitch (good luck, unless you have only a handful of tables)

  I prefer to use the oracle EXP command-line to export an entire schema, then the server target, I use IMP to import the schema. In this way, it is almost true. This makes the dirty life if you develop multiple applications in a single schema, and I felt pain - however - it is much easier to drop the tables and other objects is to create them! (thus, even if the process of EXP/IMP moved more than you wanted to "move".. blow everything you don't want on the target after the fact...)

  You can use method datapump oracle too.

  If not, what can be done, IF you have access to both servers of your instance of SQL developer (or if you can tnsping both already from the command line, you can use SQL * MORE), is to run a script that will identify the objects of your applications apex (usually by the prefix for the names of objects, such as % EBA_PROJ_ etc.) and do all the manual work for you. I've created a script that does just that so that I can pass data from dev to prod servers on a dblink. It is difficult because of the order that must be executed to disable constraints and then turn it back on and of course, more complicated if don't always precede you ALL your "objects demand '... (tables, views, triggers, sequences, functions, procs, indexes, etc.)

• Missing an account e-mail coincides with the move of the VM of the Exchange Server

  Coinciding with a move to Exchange VM from one host to another, email before a certain date disappeared for a single account (about 40). It was restored from tape, but we are looking for a reason why it happened. This employee had left, two users have full access to the mailbox and to use it actively. We found nothing conclusive on the Exchange / Outlook end. is there a risk of data loss when you move a virtual machine and where I'd look for (log file) an explanation?

  Thank you

  To be honest, I don't think that the issue is with the migration - me smells like one of users accessing mail is manually moved mail out of the mailbox or put on automatic archiving - IMO if we he realized the entire mailbox migration corrupt would not be of a specific date and not just a single mailbox.

• How to move an exchange server to another server on a different domain (trusted domains)

  Here is my scenario,

  I have two domains in windows server 2003. I'll call them X and Y. They are configured as areas of trust.

  I have an exchange 2003 server is currently installed in the domain of X. I want to reduced area X, but all emails to users in the domain X and have been created in the field X Exchange 2003 Server... I'm not an experienced Integrator Exchange, but I was administering the server for some time and I am very familiar with Microsoft Platforms.

  Can I just move the server from one domain to another?

  I have to install a new exchange server and then migrate the mailboxes? (how to do that?)

  I do not know how...

  Your help will be appreciated!

  Kind regards.

  Hello

  You question on exchange servers is more suited for the experts in the TechNet forums. Please repost your question on the link below.

  Thanks, hope this helps.

  http://social.technet.Microsoft.com/forums/en-us/categories

• Pre complains about SSL certificate on the exchange server

  Hello.  I just got a pre and tries to set up to communicate with an exchnage server.  Pre complains and will not set up the connection with this error message: «"SSL certificate error.» Is the date and time correct? ».  The date and time are correct, but the server is running a self signed certificate.  This causes no problems with iPhones that use a lot of people here.

  How can I fix it?  It is not all parameters for this problem.

  I spent the weekend trying to test and understand what was going on.  I found that if I nominated the e-mail server (name after HTTPS: / / in Setup) the same as the name of certificate displayed in the Certificate Manager (Launcher > Device Info > more info > Menu > Certificate Manager), the error should disappear.  The problem for me was that the name of cert in cert Manager was different from address of mail server (in my case server. [domain .local] instead of mail. ([Domain_name] .com).  The transformation it seems to use is:

  (1) find the certificate...

  (2) CN is HTTPS: / / in the installer?

  (3) If no, use error 'Verify the certificate, date and time not correct' (or whatever it is) - If Yes, go to HTTPS: / /.

  (4) Exchange requires safety pin?  If no, proceed to synchronize - if so, use error "unsupported of security policies.

  So I looked more closely CERT and it held several common names (CN) for the cert.  It seems that ANY OTHER DEVICE can filter through the list of common names, and use the one that works.  The Pre uses only (whether first or last, I don't know).

  So, there are two options for the certificate problem (I guess the 3rd is that you can return the phone):

  FIRST SOLUTION

  =====================

  (1) check the name of cert in cert Manager.

  (2) if it is a name that can be resolved DNS (i.e.  [mail]. [mywebsite]. [com]) then change this setting in your exchange installation program in the mail server field beside the HTTPS: / /.

  This will only fix it if your COMPUTER administrator has with permissions on the used field.  It is possible that an alias is used on other areas

  SECOND SOLUTION (as I have done)

  =================================

  (1) ensure that your Certification Authority is installed.  You can do it by clicking START > ADMINISTRATIVE TOOLS > CERTIFICATION AUTHORITY - OR - on a computer on your network using IE/Safari/Firefox and typing http://server/certsrv.  If the page is found, then you are installed, if not, then you will need to have installed.

  NOTE: SBS 2003 WILL AWARD A CERT TO THE IIS WITHOUT THE ROOT CA.  THIS SEEMS TO BE THE PROBLEM WITH THE AUTO CERTS GENERATED I HAD

  (2) If you have not installed it, go to this topic, it is well written to get step by step instructions how to install, create demand for cert, create the cert and install the cert (it took me about 30 min).   http://www.MSExchange.org/tutorials/SSL_Enabling_OWA_2003.html

  NOTE: IF YOU ALREADY HAVE A CERT ON IIS, YOU NEED TO REMOVE IT AS IT IS "DEFECTIVE" CERT BEFORE YOU CAN REQUEST A NEW CERTIFICATE.  YOU MAY BE ABLE TO REINSTALL OVER THE NEW CERT, BUT I DON'T KNOW

  (3) open https://mail.domain.com/exchange on your computer - display details of the cert and save the file on your desktop - if you are using a laptop, you can also install it on your laptop to use for use outside the Office (this is also a good back-up that you can use to get more later if needed again).

  (4) plug your pre in USB mode.

  (5) slide the cert and unplug the USB cable

  (6) go to cert Manager

  7) tap on the icon of "Sun" at the bottom left

  (8) press on the new file cert that you save in USB mode

  (9) to confirm that the new cert appears with the name of the correct mail server

  10) go to the e-mail program and configure the exchange account

  The above will create a REAL root cert (not IIS domain root Cert) that the Pre can work with.

  Really, I don't know that how/why Palm overlooked this possibility because they claimed so-called does not want to sell to companies who need strict security requirements.  For me, it means a small / medium company that has limited IT supports (according to the needs, pay as you or green guy with limited knowledge).  Then, why they test the GER in this environment, I'm not sure.  I bet they were tested on their own network, which has all the correct methods, best practices for the management of cert.  I guess it's like the developers that they have offended and almost lost their support until turned it over and said: 'sorry, we really want make you programs for our platform WebOS. ".  We've just been paranoid for so long salivate us when the bell rings. "They just didn't beta test this well enough.  The sad result of this is that Sprint will have to address all of the sheets because this certificate simple reading process was given only minimal recognition capabilities.

  But having said that - I'm now completely in love with my pre!

  I'm happy to try to help if you need it.  I found a lot of the forum of solutions were not enough detailed, so do not hesitate to contact.

• Outlook 2007 is limitation of message size, although there is no restriction of message on the Exchange 2003 server.

  When one of my users trying to reach a 50 MB file to an e-mail message, Outlook 2007 immediately appears with the following message: the attachment size exceeds the allowable limit.  The user is not even allowed to attach the file such as Outlook it immediately blocked.  We have a 10 MB limit for messages that leave the organization.  This user has attempted to send the file to another Member of our Organization. In Outlook 2003, we are able to send 50 MB files to another without problem. Does anyone have any suggestions? I wonder if there is a setting in Outlook 07 which limits the size of an attachment. The confusing part is that he was not yet able to attach the file.

  OS: XP Pro 64-bit
  Suite Office 2007
  Exchange 2003

  Thank you!

  Hello

  1 you need to set the maxRequestLength value in the web.config file to a value greater than 50 MB. The maxRequestLength value in the web.config file is a parameter ASP.NET prevents applications greater than a certain length that has been added to prevent DOS attacks. He is set to 30 MB by default and must be increased in order to send attachments more than 30 MB. This could also be declined to enforce a lower limit.

  2. you need to increase the MaxSubmitMessageSize which is a property of the mailbox of readonly (MaxSubmitMessageSize = 0x666D0003) and this is where we reach the limit of 10 MB.

  It is read from the following locations:

  1. First reading of the object the user mailbox
  2. If not found as indicated by "unlimited", Transport Settings Container
  3. If not found as indicated by "unlimited", Org (read default Org container) container

  To set the value, use the following tasks in the Exchange Management Shell:

  1 set-transportconfig MaxSendSize (this is KBS) and then assign 51200 for 50 MB attachments. This will put it to all users

  Or

  2 set-mailbox and set the MaxSendSize (this is KBS) to 51 200 for attachments of 50 MB forspecific to a set of users.

  Once you set or the other, you must recycle store or not access to the mailbox for 15-20 minutes (to allow to store the cache expire) so that the change in size to have effect. In addition, the property is stored in AD and submitted to replication delays.

  One last thing that you should be aware of (sorry, the list will just):

  We have a timeout of 60 minutes for any attachment request or download attachment query (in OWA basic and Premium). So if you try to download an attachment 50 MB on a 56 Kbps connection, you will then expire and get a HttpWebException (e.g., the max upload is about 25 MB on a 56 Kbps connection).

  So, to sum up, there are two keys to send a large attachment:

  1 ASP.NET change web.config settings.

  2 modify the MaxSendSize using the set-TransportConfig (for all users) or Set-Mailbox for individual users.

  And you must

  3 ensure that the total download time will be less than 60 minutes (depending on your size and the speed of your network link)

  The web.config change is immediate, but the MaxSendSize change takes time, because of the caching strategy (the letter box, DSAccess deadlines and delays in replication cache).

  Examples:

  Changes to Web.Config

  By default, web.config under OWA virtual directory (Microsoft\Exchange Server\ClientAccess\Owa) will have the following entry (by default, the maximum request size is about 30 MB):

  ....

  Change to where X is the value you want in KBs. 50 MB, X will be of approximately50000

  Change the size limit of messages by user

  Go in the Exchange Management Shell and type the following command:

  Set-mailbox - id: "username" - MaxSendSize:50000

  Where "username" is the identity of the mailbox. This will set the limit to send message to about 50 MB. You need to restart the store to see the effect immediately.

  Change the size limit for messages of all users

  Go in the Exchange Management Shell and type the following command:

  -Set-transportconfig MaxSendSize: 50000

  This will set the limit to send message to about 50 MB. You need to restart the store to see the effect immediately.

• How can I determine the name of my exchange e-mail server: I try to add an e-mail account. in Windows Mail, running Windows Vista on a Compaq Presario

  Here are the details:

  I have Windows Mail installed on my PC and you want to add an e-mail account.  The issue started when I was trying to send a document I had picked up on a website and received an error message there was a problem with POP3.  Then, I tried to set up an e-mail account and after that following instructions was puzzled because I didn't know the name of the exchange server.  I am running Windows Vista on a Compaq Presario.

  I first contacted my internet framework, which is Charter Communications and they referred me to Microsoft, which, in turn, was told to contact Charter Communications, call the Compaq or come to this site.  At this point, I'm a little frustrated.

  Hello

  If you are tring to add an e-mail account in Windows Mail, you get the settings from your ISP (Charter Communications), then follow the information from Microsoft on how to implement.

  You need the Charter:

  1. your username with them

  2. your password with them.

  3. incoming for them mail server.

  4. the outgoing e-mail server for them.

  Charter e-mail settings:

  http://www.myaccount.Charter.com/customers/support.aspx?supportarticleid=1417

  Then follow the steps to set up Windows Mail:

  "Windows Mail: setting up an account from start to finish.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  See you soon.

• BlackBerry blackBerry 10 does not receive the emails from the exchange server

  Hello

  We have the problem that peripheral Blackberry doesn't synchronize with the server exchange since last week. This is valid for two (classic / Z30) among the four devices, the other ones (classic / Z10) are functioning normally. All have the 10.3.2.2474 version.

  I rebooted the unit and removed and rebuilt the e-mail account on the BB, but it doesn't help. Account settings are ok (no messages during installation). The device connects to the exchange server (for example, I can see the account's e-mail records in the options) and I can also send mails. But I don't get e-mails, calendar items, contacts, etc.

  Any ideas?

  Thank you

  Axel

  Hello

  I'm not 100% sure, but I think that there is a restart due to the update of the BONE last week. I don't know if this has coincided with the problem.

  I reloaded the OS yesterday via the LINK. It seemed to me that does not solve the problem because I have not yet received mail for a while. However, this morning the mails were back.

• Exchange 2003 FrontEnd Server Down, Bank of messages of the unit down.

  Hello

  The configuration of the Exchange 2003 environment with 1 Server frontend and backend (cluster) 2 servers. The Exchange FrontEnd server is down due to the problem of relay service. All outlook and exchange related services clients are point directly to the server main exchange. This cause of unity is unable to store voice messages in the exchange store. When subscribers call for unity, system will tell the Bank to the user messages are temporary offline. How re - configure the unit to make it appear the message store? Below is the version of the unit.

  Cisco Unity Version 4.0

  Build number 4.0 (3) SR 1

  Windows Server Version Microsoft Windows 2000 version 2195 (Service Pack 3)

  Pls advise.

  Thanking in advance for your help.

  The guide of reconfiguration:

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_upgrade_guides_chapter09186a0080205a7f.html

  Thank you

  Keith

• Configuration for the Exchange Server issue

  I have a question on an Exchange Server, I noticed that one of my Exchange servers has 4 partitions spanning 2 hard drives and a parition of M which is 55GO, but that does not appear in disk management. M partition contains the domain folder, the mailbox databases are on the D: drive. How will I know how much I really voicemails of disk space? And this configuration is supported?

  Chris

  The "M" 'virtual' drive that resides on Exchange (55 additional GB, its representation is not just messages of real exchange located on who will drive you have configured for the mail store).

  Another pattern on this drive "M":

  The default for this reader is the reader of 'm', but if you manually created a "M" drive before installing Exchange will change to another drive available. It is now recommended to 'disable' this disc.

  Run the "Best Practices Analyzer Tool" on the Exchange Server and it will find any question you should change. To turn off virtual drive is one he'll find and indicate what registry entry to change:

  http://www.Microsoft.com/technet/prodtechnol/exchange/downloads/2003/analyzers/default.mspx