Move the hard disk to my G5 to mac intel & update?

I would like to physically move a hard drive from my mac G5 (OS 10.4.11) for mac intel xeon.  Once the HD in the Intel Mac I could use my Snow Leopard installation disc to upgrade this drive to 10.6.8 without problems.  The old operating system will be written to the wire and all my other files remain intact?    Looks like an easy way to migrate from G5 Intel if it works.

Any help is very appreciated.

I forgot to mention: the G5 HD I would move out will be a hard drives.  The startup disk is running 10.6.8.

Tags: Mac OS & System Software

Similar Questions

  • Change the hard disk of 1.4 Ghz Mac Mini end of 2014

    Good morning Apple community, so here's the problem: I had a voltage breakdown because via the USB port of an EPSON LX - 300 printer, at present when the USB and the Mac Mini contact, ventilation Mac shutoff valve and after a few tries to do turn it finally do. But I see that a gray folder appears with an exclamation mark, then, with my other mac I download OS X El Capitan and do a Booteable USB, after that I enter the utilities disk and found that the "Macintosh HD" was not there and 2 USB 3.0 also didn't work. I picked up at a technical Service allow in my city and have told me that the HARD drive is broken and must be replaced, they say it could be replace by an of a 7200 rpm or 5400 RPM HARD drive RPM HARD drive, also says that couldn't put an SSD. I start research and found it is possible to put an SSD without problem. So my question is that's for sure, so I trust that an SSD will work with flawessly, and that I will also get a big performance improvement.

    My Mac is:

    Mac Mini end of 2014 1.4 Ghz 4 GB of RAM, Intel HD 5000 and a 500 GB drive HARD 5400 RPM death.

    So, my best regards to the community and hope for a response.

    I've been running my 2014 MM off an external SSD with USB 3.0 since the beginning of this year, after a bunch of trial and error; That's what I have:

    Unfortunately, I don't have much advice to give you else make sure you have a proper forum for IT. From my experience, the bad speaker will make the difference in whether or not the Mac recognizes the SSD on initialize toward the top.

    Good luck!

  • I recently spent the hard disks, now I can't use windows update, and many things do not work with her telling me that I have a non-genuine version of windows

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0x8004FE21
    Code of Validation caching online: 0x0
    Windows product key: *-* - 73CQT - WMF7J-3Q6C9
    Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
    Windows product ID: 00359-OEM-8992687-00010
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.1.7600.2.00010300.0.0.003
    ID: {110E5798-547C-4E16-A39A-50DED349C409} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0 x 00000009
    Build lab: 7600.win7_gdr.120503 - 2030
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 100 authentic
    Microsoft Office Home and Student 2007-100 authentic
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->
    [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

    Other data-->
    Office details: {110E5798-547C-4E16-A39A-50DED349C409}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-1802398032-3129996896-1938211476Hewlett-PackardHP G62 Notebook PCHewlett-PackardF.1520100426000000.000000 + 00017B93607018400F804090409Time(GMT-05:00) Standard is03HPQOEMSLIC-MPC100100Microsoft Office home and Student 20071244C54B27D4EF38DlJnqGC9Fs8MocD6cCMmFytChMs = 5160342-81602-924-68546 1

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7600.16385

    Name: Windows 7 HomePremium edition
    Description: operating system Windows - Windows (r) 7, channel OEM_SLP
    Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00178-926-800010-02-1033-7600.0000-1172010
    Installation ID: 016205689981921686173085639011241993609851718900326893
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: 3Q6C9
    License status: licensed
    Remaining Windows rearm count: 1
    Trust time: 09/11/2012 10:47:30

    Windows Activation Technologies-->
    HrOffline: 0x8004FE21
    HrOnline: n/a
    Beyond: 0x000000000001EFF0
    Event timestamp: 11:9:2012 05:31
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:
    Altered the file: %systemroot%\system32\sppobjs.dll
    Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
    Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
    Altered the file: %systemroot%\system32\sppwinob.dll
    Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
    Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
    Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
    Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
    Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
    Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
    Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
    Altered the file: %systemroot%\system32\drivers\spsys.sys

    --> HWID data
    Current Hash HWID: LgAAAAEAAQABAAIAAAABAAAAAgABAAEAeqh2tCiMSnBKUf5xvPZkLKSv8k9Gyg ==

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    HPQOEM APIC-SLIC-MPC
    HPQOEM FACP SLIC-MPC
    HPQOEM HPET SLIC-MPC
    START HPQOEM SLIC-MPC
    MCFG HPQOEM SLIC-MPC
    ASF!            HPQOEM SLIC-MPC
    SLIC SLIC-MPC HPQOEM
    SSDT PmRef CpuPm

    This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

    Intel rapid storage driver installation

    try to download and install them from here - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21730

    (you want the download of iata_enu.exe)

    Once complete, please restart twice, then after another MGADiag report.

  • Move the existing 5.5 ESXi installation of the HARD disk on USB.

    I need help on what would be the best approach to move my existing ESXi 5.5 install the HARD disk to the new USB.

    Then you tell your environment uses the local disk to your VM data store (s)? In addition, you want to move your partition ESXi to USB and recover the local disk space? I think if it was me, the the more safe thing to do would be to shut down the system, pull on the local drive on just enough to disable / he dethrone, insert the USB key and run ESXi installation. Then (after checking the boot order) reinstall the local disk and boot the system. Once the USB key version boots, make your configurations (DNS, NTP, license etc.) and add the data store (s) existing local drive. You can then add existing virtual machines via "navigation" of the data store (s).

  • Why the HARD disk is partitioned into C & D on Satellite Pro C partition

    Why the HARD drive is divided and how to use it?

    It is important that the one that I use?
    It turns into one big disk?

    The manual says nothing about this.

    Thanks for any help

    Ken

    Hello

    The HARD disk is partitioned and contains two partitions. The C partition is the system partition that contains the Windows operating system. The second D partition contains data drive HARD recovery.
    HARD drive recovery allows you to establish the notebook back to factory settings without the recovery disk usage.

    But it s is strongly recommended to create the recovery disk! The user manual provides the info on that in case something goes wrong with the HARD drive, the recovery disk allows you to recover the laptop.

    Of course, you can delete the D partition if you want to, but before doing so, you must create the recovery disk.

    However, my HARD drive contains 3 partitions. I created an extra. In my case, the C partition contains only system and the unique software. My files private like Mp3, movies, etc. are placed on the D second partition).
    The third partition (E) contains a folder with games.

  • Why the hard disk is divided into partitions of two data (C:Vista and E: Data)?

    I just started a new A200-1V0 and found that disk space is divided into two partitions of sizes equal 'C:Vista' and ' E: Data "(and a small one EISA).

    WHY? What is the logic and purpose? It's not even as if the C:Vista partition is smaller and intended only to the tricks of the 'system' as the root 'Users' (user Documents) is on it also.

    This is the default for Vista (my first use of it), if not, who said that Toshiba could do this without asking me?

    How can I move the root 'Users' in Vista (in the data partition) - if I have two partitions that I might as well use it?

    I can resize partitions in Vista without a utility 3 rd-party (or a complete backup/restore)?

    Thank you

    Hello just YOU

    Please don't be offended because there is no reason for this. You bought the new product with the factory settings. Toshiba and other hardware manufacturer do not know every customer personally and, unfortunately, it was not possible to ask YOU how to set up YOUR laptop.

    Because of this, there is a recovery of product support that allows to configure the HARD disk according to your wishes and needs.

    Please use this DVD and install OS how you want it to be. What recovery procedure starts, you will see CONFIGURATION option on the right side. Click on it and choose the right option.

    Reinstall the OS and enjoy your life. Really, I don't have the time to write on the floors of two partitions, because this is basic stuff and you probably don't want to waste your time to read this.

    Bye and good luck!

  • Remove stranded files from the hard disk to the VM package

    I have a virtual merger machine that is now 96 GB in size (database development) and it contains several virtual hard drives.  Now, I have cleared one of the drives on and outsourced (he placed on an external Firewire based drive).  Removing the abandoned drive does not reduce the size of the virtual machine.  Research in the VM package, I see that the hard disk file (vmdk) is always inside the package and using 54 GB.

    The question is so I can delete these files from the VM package or it will damage the VM?  I tried to make a backup of the VM, but right at the end that it maintains the production of an error so I would like to know if anyone has experience with this before making the jump.

    Removing a virtual drive simply deletes the references, it does not delete the virtual disk. If you do not have a snapshot (for example), it is safe to delete. Make sure get you the right one, well - I recommend you all first move somewhere else and then try to start the virtual machine. If it is used at the moment (but maybe not if it is only used by a snapshot), merge will complain.

  • How can I access the hard disk in a satellite A30?

    I just bought a new hard drive and were surprised by the lack of information on the internet with the help to access the hard disk. Help, please. I have the satellite a30-203. Thank you, Daniel Short

    Hello Daniel,.
    location of the HARD drive is down just under the CD-RW/DVD device.

  • Satellite L450 - how do you start the recovery from the HARD disk?

    Hello world

    I just joined the forum and already I need help.

    I have 2 questions (10) I'm an ODP, and I volunteer for a local blind group who all have laptops and rewrite the textbooks in braille users. Now a desire to know how start recovery from the HARD disk drive and what you should do disks for this.

    and (2) another received a laptop computer Toshiba A 100 and it does not start as soon as the Toshiba screen appears it lacks a password, we tried all kinds of passwords, tails of start and a new record of program but it does not start. Can anyone help please.

    Ken

    For instructions how to recover a Toshiba laptop with verification of HARD drive recovery procedure please this document > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    The Satellite A100, I presume that you need BIOS password. Unfortunately, there is nothing you can do about it. Accredited maintainer Toshiba can remove the password for you.

  • Satellite P300 - 190 PSPC2C - water spill and the HARD disk does not appear on the Setup

    Hello

    Spilled water on the keyboard. Laptop has stopped working.
    Dried, but did not recognize the HDD start up and HDD does not Set - up.
    Moved the HARD drive to another location of the HARD drive on the laptop and it appears at startup and boot OK.
    Is there an easy way to find and repair the defective HARD drive slot?

    Thanks for any help.

    PK

    Hello

    The HARD drive slot is not repairable. It s a HARD disk controller and I guess the HARD disk controller is dead.
    The HARD disk controller is part of the motherboard and if you want to repair it, so the entire motherboard must be replaced.

    New motherboard would cost a small fortune he of not good about market 350Euros
    That's why I put t think it is s to replace the mobo only to get the HARD drive in the first location of work

    This is my personal opinion...

  • Impossible to 'System' to defrag Portion of the hard disk on Windows 7 Pro or Windows 8 Pro dvt7-3000

    I have a laptop HP Pavilion dvt7-3000 CTO that has a single disk drive hard 500 GB.  The operating system has been improved in Windows7 Pro (64-bit) to Windows 8 Pro (64-bit), but the problem occurs in both operating systems.  When conducting the defragmentation of the different hard disks (C:\ D:\, HP tools and system), the percent of the "System" drive which is fragmented never changes, while the % fragmented adequately for other readers going to 0%.  Over time, the system part of the hard disk rose to 27% fragmented.  How to defragment this drive?

    Hello

    The system partition contains the boot files and recovery for Windows 7 environment and should not be défragmentée.  It will always appear to be fragmented and it is quite normal - force this partition defragment would almost certainly avoid the Windows startup.  In addition, the fragmentation in this small partition has absolutely no effect on performance.

    For much the same reasons, the recovery partitions or HP_TOOLS must be défragmentées.

    Kind regards

    DP - K

  • Satellite P100-429, stopped after you create the partition on the HARD disk

    After you create the partition on the HARD disk. PC just stopped.
    After using the restore CD, nothing happened again, any ideas?

    Hello

    Express media player has been installed on the partition of the laptop?
    I can give you a good solution for 100%, but there may be a conflict between the express media player partition and the new partition.
    Have you installed the OS on the new partition?

    Hey Buddy, try to delete the entire partitions in the HARD drive and format the HARD drive completely. Then try to use it again the Toshiba Recovery CD and install Toshiba image on the HARD drive.

  • Equium U400-145 - where is the HARD disk protection tool?

    I just bought an Equium U400-145, and in the manual it says there is a Protection of the hard disk utility and properties are accessible from the icon on the toolbar or via the start menu in Toshiba - Utilities.

    There is no icon in the toolbar and without Protection of HARD drive in the start menu. Protection disc HARD drivers are on the C: drive, but when I try to install I get a message HDD Protection is not supported on this model. It's strange because the download from Toshiba site lists the Protection drivers from the HARD drive for this model.

    Any who have HARD drive Protection works on this model or know if it should work?

    I have a U400 to and protection of the HARD drive is not available on all models of laptops U400.
    The user manual has been created for all the U400 laptop models and it of possible that your U400 doesn t support this feature!

  • Question on the hard disk on Satellite M40X

    I'm working on a clients M40x and the hard drive broke down and I would like to replace it and I have some options and I was wondering if they will work.

    Currently, there is a MK6025GAS in which is fried. Below are the options I have.

    1 MK6034GAX
    2 MK8032GAX

    Can I use a Maxtor? If Yes, what models?

    HUGE thanks :)

    Hi dude

    You can use the hard disks of each production. It s any HDD manufacturing is. The HARD drive is important! So you need a drive that supports the enhanced IDE (ATA-6) interface!

    The SATA drives are not compatible.

    The MK6034GAX 60 GB HDD and MK8032GAX 80 GB HARD drive looks to support the ATA-100 interface (ATA-6). So, in my opinion, the hard drives must be compatible and should run

    Greetings

  • Upgrade the hard disk on Tecra M9 will void the warranty?

    Hello

    I want to upgrade the hard drive on a Tecra M9 120 GB to a 200 GB Hitachi Travelstar 7K 200 hard drive SATA 3 GB/s. The coverage still apply for the Tecra after this upgrade?

    Kind regards

    charlieMOGUL

    Upgrading the HARD drive would not affect the validity of the guarantee.

    But I'm not sure on the size 200 GB HARD drive the BIOS supports a HARD drive size limitation and not all dimensions are supported. If the HARD disk is too big, the BIOS would not recognize the new HARD disc.

    The problem is that Toshiba doesn't provide any information on HARD drive sizes possible.
    I think that you should just look at it

    If you have tested this HARD drive, please report it here in the forum I m very interesting if the 200 GB would run properly.

    Good bye

Maybe you are looking for