Unable to connect to the 2Wire645 error message

Similar Questions

• Unable to connect to the Internet error message, "(serveur DNS) does not". "

  Original title: connection to the Internet.

  I am really a novice in computer science.   The wifi signal is strong and I'm connected to the internet, but I can not connect or when I do connect it falls to me as soon as it connects.  Where is my problem?   the only statement I received is that the computer is configured correctly, but the device or resource (DNS server) does not.   Can anyone suggest what to do next?

  Hello

  This problem may if the router is not configured correctly or if the TCP/IP settings are incorrect.

  1. What is the brand and model of the computer?

  2. when, exactly, you get this error message?

  I suggest you try the procedure described in the article and see if it helps.

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7
  http://support.Microsoft.com/kb/2779064/en-us

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Unable to connect to the internet ERROR 678

  original title: Please help me because I get ERROR 678 frequently

  I use a broadband connection on my desktop pc with windows XP SP3, as I tried to connect through windows running phone 7 ultimate, but I was unable to connect to the internet, now even once, I plugged the cable broadband for desktop pc and now I get ERROR 678 , after several attempts to recall that I am able to connect through desktop pc. I have met it 2nd time to do the same procedure for the first time he resolved automatically, but now there's a problem. also contacted the service provider as their laptop to connect to internet with my account but I can't my pc... HELP ME PLEASE...

  Hi Aniketpawar,

  ·         What security software is installed on your computer?

  I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2

   http://support.Microsoft.com/kb/892889

  Let us know if that helps.

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• "Unable to connect to the computer error' user profile failed to connect.

  Original title: reset windows password after being locked up and he treated the new password, but I'm still locked. I don't have a password reset disk. What should I do now?

  Tour computer off standby. And when I turned it back the next morning that my password would not work. Figured out how to change the password but still getting the same message and still locked. He did deal with the new password, but just do not let me in. I don't have a password reset disk. What should I do now? Any help is greatly appreciated. I have to deal with my computer and must be able to use it as soon as possible. Thank you

  Also says "Service user profile service does not logon.

  You suffer from the dreaded problem 'user profile '. I don't have a good solution, but if you type the entire error message into a Google search box, you will get countless successes with at least some of them containing good advice.

  No one gets a Windows repair CD when buying a PC. You need to burn it yourself via the control panel / backup and restore. It only takes three minutes and having one is absolutely essential for those who wish to make their own PC maintenance.
  Talking about the essential things: a fully tested alternative admin account is one of them. Without one, you can get in diabolical trouble (the same as when not having is not a spare House key where to break a window is a radical and totally useless but effective solution).
  It might be possible to solve your current problem as follows:
  1. keep tapping F8 during the first phase of startup.

  2. select Repair from the menu.

  3. Select an administrator account, and then enter its password.

  4. When you are prompted, select System Restore.

  5. set Windows to a point well before this problem occurred. This will outline also all passwords to their old values.

• Unable to connect video Vimeo. Error message says "mime type or video format is not supported.

  I am using a model with a full-screen video landing page, but I am unable to join Vimeo video to connect. Error message says "type mime or video format is not supported.

  I downloaded successfully on Vimeo however when published in the catalyst and preview the message error "type mime or video format is not supported." appears.

  What is a format problem? I want to emphasize I use a model of Museworld as I am not a designer or graphic artist just an another noob. @

  Hello

  This seems to be an error in Firefox:

  Firefox error: Ms type or video format not supported - articulate the Storyline Discussions - hero of E-Learning

  Please check if you are able to watch the video on Vimeo.

  Also, try using a different browser.

  It will be useful,

  Sonam

• Unable to connect to the Internet, error 8004840 has

  Hi, I have a vista premium edition service pack 2 32-bit windows operating system family, and I can't connect to the internet, plus I get these codes error 8004840a, or 80072ee7 and some times code different, I tried everything but nothing works, any ideas.
  OT:error code 8004840 a
  Thank you
  Francis

  Hi Francis,.

  1. What is the accurate and complete error message you get when you try to connect to the Internet?
  2. you are trying to connect wired or wireless?
  3. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Wireless and wired network problems
  http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Unable to connect to the database server messages

  I checked all the posts here on this subject and can not find a solution if we go

  I have a new C410 all-in-one Premium fax - sets up a fine on a wired network or wireless and prints & Fax etc. without any problem, but when I try to activate eprint I just get the error message from server connection - there was a problem connecting to the news server to retry or OK to leave.

  This has not worked for 2 days

  I ran the speed test

  Download 2.66 MB/s

  Download 8.84 Mbps

  Ping 40ms

  I use a belkin N1 Wireless modem router

  All my other computers connect to the internet fine

  I do not have a vpn

  VAx2FN1024AR firmware revision - cannot verify updates without connecting to the server

  I have fixed Ip address because I owe everything to be connected to the network the IP address is 192.168.0.9

  net void mask 255.255.0.0 Gateway 192.168.0.1.

  Cable and wireless reports show no errors BUT the entries for the primary and secondary dns servers are blank 0.0.0.0 - I can't find anywhere where I can enter the required parameter IS - what THE PROBLEM? IF SO HOW TO SOLVE IT?

  I tried

  Uninstalling and reinstalling

  Restore default network (I can't connect to the network)

  Re start printer

  Only, I bought this printer for the eprint

  Help please

  Hello

  Let me start by saying that I am not familiar with your particular machine, but the following points can help.

  1. try setting, the subnet mask of 255.255.255.0 , just to make sure that it is on the same subnet as the rest of your devices.

  2. I guess from what you say that the option to add the DNS server is not available in the peripheral screen menu.  Is this correct?

  3. as you say all your devices have implemented static IP, receives the router as DNS server or you set the addresses of DNS servers individually under the IPv4 for each device properties?  Since your PC can view you a Web page for the device by entering its local IP address in your browser.  If you can, is there an option under network in order to assign either the router as DNS server, or to be able to define individuals respond, depending on which is applicable in your case?

  If all goes well, someone who knows your device will see this, but let me know how you get the above proposals.

  Best wishes

  DP - K

• Unable to connect to the internet, error: default gateway is unavailable.

  Original title: help

  whenever I use my computer at some point I will get a message that I'm no longer connected to the internet, windows diagnostics will do its thing and fix it, but it keeps well back, he says my default gateway is unavailable. Thank you amber

  Hi amber,

  Let us work together to solve this problem.

  Please answer these questions:

  1. what is the accurate and complete error message that you receive?

  2 what is the make and model of the computer?

  3 you have any third-party antivirus installed on the computer?

  If please try these methods and let us know the results:

  Method 1: Reset WINSOCK TCP/IP IPv4 and IPv6 TCP/IP stack.

  Follow these steps to know how to do:

  a. press Windows + R keys on the desktop, to open the dialog box run.

  b. type cmd and press ENTER to open the command prompt.

  c. type these commands and press ENTER after each line:

  netsh winsock reset catalog which resets the WINSOCK entries to
  default values of the installation.
  netsh int ipv4 reset reset.log that resets the TCP/IP IPv4
  battery installation by default.
  netsh int ipv6 reset Reset reset.log IPv6
  Stack TCP/IP to default installation.

  d. restart the computer.

  Please visit the following link:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357?WA=wsignin1.0

  Method 2: Disable temporarily an antivirus installed on the computer and see if the problem is resolved.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please get back to us with the results and any other questions you may have about the Windows operating systems. We are happy to help you.

• Unable to connect to the Internet, error: this computer does not have a network adapter installed and configured

  Original title: basic computer.

  I have a Dell with windows vista. He has been in place and slow so I reinstalled the program. Now I can't access the internet. I get an error message that says that this computer has a network card installed and configured. I have a linskeys wireless router and we have two laptops that work very well. Don't know what else to do.

  Hello

  Go to the Dell website and download the drivers for your model computer.

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection?FKEY=Drivers_PS

  Use one of your other machines > download and save the drivers, network adapter, etc > copy of Flash Drive > transfer and install them.

  See you soon.

• Unable to connect to the CC - ERROR

  I'm on an iMac running 10.8.4 and when I open a session check my CC license, I get:

  Error

  There was an error with this action. Try again later.

  ae61cbdd-ad1e-463C-bd68-b8be4ba33594

  It worked 2 weeks ago, but since a few days I get the same error. I tried the simple alterations and passed to a 4 G mobile connect to test the network.

  Someone at - he seen this error before?

  Kind regards

  pmld

  Please restart your machine and try the same thing. If the same question, try the suggestions listed here. http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Unable to connect to the internet error unidentified network

  I have an acer w/Windows 7 and when I turn on the computer, it does not connect to the internet, it says unidentified network and does not connect. What are the options at this point? Modem provided by my cable company a Motorola 6580.  Now, if I unplug the modem and click on diagnose connection, it will connect not ultimately.  This however is ridiculous because I did not have to do when the computer is difficult in the modem cable.

  OT:Motorola 6580 - when I turn on the computer does not connect to internet

  All tips will help!

  Hello

  You did changes to the computer before the show?

  Method 1: update the network driver.

  Steps to update of network driver:

  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select the network card device and right click on it
  d. now, select Properties.
  e. in the Properties window, on the driver tab, click Update driver.
  f. after the installation of the updates, restart the computer.

  For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Method 2: Try resetting the TCP/IP stack.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357 .

  If the same problem still persists, then try the next method.

  Method 3: Here, you need the problems using the network troubleshooter in Windows 7 and check for the issue to this follow the link provided below.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also: Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• After trying to connect to the internet error message knows unidentified network

  Original title: problem connecting (unidentified network) environment.

  A few times my labtop is big when it connects with the Ethernet cable say: unidentified network
  But when I connect it to an another labtop its connect to the Internet.
  I don't know what case, please help.
  Kind regards.

  Hello

  Did you change on your computer before the show?

  Follow the steps mentioned below:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It could be useful!

• ScanJet G3110 - 'unable to communicate with the scanner' error message

  This Scanjet has worked well over the years.

  I don't remember making any changes, but now when I click on any option (for example copy or scan to email... all options) I get the error «unable to communicate with scanner» HP

  When I click on "Preferences of the Scanner", the Apple preferences page with a popup that reads:

  To use the "HP Scanjet", preferences preferences pane system must leave and reopen it.

  I click OK and system preferences change to 'Preferences system (32-bit)'

  I click on the HP icon and it opens to "no value / not connected".

  I have reset the scanner; have you checked all connections... no change.

  I put on computer.

  The scanner scans noise when it starts up.

  But when I press the "scan" button (or any button) on the scanner itself, nothing happens.

  Using OS X 10.6.7

  Any ideas?

  Hello nikhil_gupta

  The Scanjet series of scanners is of commercial products. I suggest you post in the HP Business Support forum for a better chance to find a solution, because it's the boards of HP for the consumer and there are people less familiar with this product range.

  You will find the Board Commercial Scanjet here.
  HP Business Support Forum: Scanners

• Unable to connect to the Internet error "Windows does not detect a network card installed properly"

  Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

  Any help is appreciated

  OT: Internet connection

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows