Move the image in a "Picture" screen with a specific contact point
Hi all
I want to insert 8 images in one. So I have to pass all the image coordinates (X, Y) specific.
By default, the image is centered.
My response is:
I can move an image in a screen 'Image' in the range of vision to the specific point of coordinates (X, Y). If so, how.
Thanks for your help.
Thank you, Andreï Dmitriev, it's ok.
Best regards
Tags: NI Software
Similar Questions
-
Frustrated by the clone in CS5 stamp. Whenever I go to the for use, it just moves the image as if I had multiple layers. Is anyone out there can help with this?
Check the palette Source of duplication for options that you forgot which allows...
-
Hi, I'm trying to post a photo, but whenever I have try rotation to the right, it says something like: can't save changes to the image due to a problem with the properties of the file. My laptop is MS, but the photos were taken on the Iphone. How to do this?
I don't know if the following links answer your question, but
they may be worth a visit:Good luck and * proceed at your own risk *.
FWIW... There is a very long discussion (several pages) to the
following link:Cannot change the imported iPhone 4S photo
https://discussions.Apple.com/thread/3444951?start=0&TSTART=0More Discussion
iPhone 4S image properties is not compartible with Windows?
Editing can be done on the computer due to the error
"Windows Photo Viewer cannot save changes to this picture.
because there is a problem with the properties of the image file".
Any help?
https://discussions.Apple.com/message/17291884#17291884More Discussion:
We cannot turn a few photos in Windows 7 (but can turn others)
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524A simple solution is to open the photos in paint or most other
digital image editor and modify it.Some people have reported success using the following free download
to remove the metadata.Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
http://www.SteelBytes.com/?mid=30&cmd=download&PID=15Here's a way to turn...
Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
the rotator Lossless JPEG free
http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/Free download JPEG Lossless rotating
http://annystudio.com/software/jpeglosslessrotator/ -
Move the slider to its current location with the Windows Vista speech recognition?
How is a moves the cursor from its current location with the Windows Vista speech recognition?
What is happening with this example? -What are you talking about?
"You must get the cursor in front of the word 'harder' by saying 'Move to harder' and then say 'open quote', then move it to the end of the strongest with 'move after harder' and then 'close quote.' »
Vista speech recognition
http://www.ExtremeTech.com/Article2/0, 2845,2109977,00.aspIs there something to this?
"You can move the cursor anywhere on the screen and tell your mouse to"Click". This, together with the mousegrid. Say:
MOUSEGRID. "
Transcript of speech recognition demo Windows
http://www.Microsoft.com/enable/demos/windowsvista/trans_speech.aspx -
Issues sticky not able to move the image
I use Photoshop CC 2015. OK, I have 6 jpg files I want to put it on 6 different layers in the document I'm working on. I have them in the tabs. I'm going to the first. CTRL A then Ctrl C. I'll then paper work and Ctrl V to paste. He puts it on a new layer in the Center and I want to put on the right of the image. I am unable to move the image I just pasted.
What happens if something am I hurt? It's frustrating. I already did without problems. I have set up my document incorrectly or what?
Sorry for the post. I had problems with photoshop without being properly set up. He was missing the tool move my toolbar. I have reset photoshop on its values, and I can do what I need.
Once again sorry for this post if there is a way to close the positions and then close it.
-
Hi, I installed a Windows update when my computer froze, so I turned it off and back on, now I can't even boot to the installtion disk supplied with the computer. When I hit F8 reapeatedly and select one of the available options, the computer contiually restarts and will not even go into safe mode. I tried hitting ctrl-alt-del, which brings me just for the system configuration menu. I even tried a software that is supposed to start any computer with any problem, and I get the same results I get with the installation CD. (Blue screen with error message: STOP 0x0000c1F5 (0x00000000, four times).) I can't do anything with it, can you help me!
Windows Update Forum:
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly understand exactly what happened when you tried this update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
How can I change the properties of the image to a picture fill?
I have several images that are inserted in a gallery using the "fill" method However, when I click on the image to select this option to change the properties of the image, I can not select the image. I get the solid red border around the box, but when I double click in the hope of seeing the red dotted lines or tan border border indicating that I have selected the image, nothing happens. When I right click on the solid red border, it only allows me to change the properties of the image because I did not really choose the image, only the holder of the box.
Any help on how to change the properties of the image to a picture fill?
Thank you!
Anita
It is not possible to apply settings to an image set as a background fill, the image is applied using CSS.
David
-
Hi, I use lightroom 5 and have been for several years. Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter. I see other people have had similar problems, but I am not able to follow these solutions and would very much help here. I have an IMac.
If you had probably two problems
Permissions, the other is the hardware problem causing slow import and the card cannot be read by your operating system.
-
I have an epson printer p950 and try to print from lightroom. I get lines across the image and Epson tell me I need to contact you to find out how to slow printing
Suggest you to reset preferences in Lightroom and then, check out: to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file
-
The VMware Workstation Server service stopped with service specific error %-1.
Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.
Running on Windows 7 SP1 x 64. The port is set to 7443.
I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.
Thanks for all the ideas, what could be wrong and how to fix it.
Hello
I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.
I have attached the file to this message.
Change of the
section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!). I hope this helps.
Steve
-
How can I move the image to the right about a half inch to fill the screen properly
How can I move the screen picture to the right, about half a ince to fill the scree properly and allow a full view of the icons?
The problem is with the settings of your monitor. One of the buttons on the front of your monitor will take you in the settings of your monitor. Select the option which moves the video horizontally, use the arrow keys to move the right way and press the settings button to exit. Should be pretty simple.
-
Organize and rearrange the images in a folder named as in XP. You could organize by date, size, etc. and do drag and drop all in a folder, it is not possible in Windows 7
Hi Halohodge,
Welcome to the Microsoft Answers site!
You can't manually rearrange files/images by dragging them in the folder in Windows 7. This change is design in Windows 7.
If you have concerns or comments with respect to the question or any other Microsoft application, please see the links below and send the same:
Microsoft Connect
http://connect.Microsoft.com/If you are referring to the reorganize by date, size, etc. then you can always do than simply right click and selecting the option of sort by in the drop-down list when it appears in the photo or file folder.
Concerning
Varun j: Microsoft Support
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Export the image as a picture quality (72 dpi only?)
Hello
I did experiment with the recording of images of films, but it seems that they cannot be exported to 72 dpi, which makes it identical with a piece of screen basically. So the question is to know if we can save the high quality images for printing. I imported a movie in APP was extracted from a DVD, and recorded in mp4 format.
Thank you!
Gustavo
Santa Fe, NM
Gustavo,
Let's go to this subject in a different way. You use words and we use words and I don't think they mean the same thing for you as they do for us. This is the number of pixels available and I have a feeling that you are looking to create more pixels for what you would call a higher resolution. Stick with me for a while and I think I can clarify this.
You have a video from a DVD. You brought it in Premiere Pro. Let's assume for the moment that this is a standard definition DVD, so you either imported in 720 X 480 or you imported in 640 X 480. You did not, so these numbers may be wrong. But we will use 640 X 480 for example because it uses square pixels and therefore easier to do the math.
Export the 640 X 480 image by clicking on the button to export the image (small camera), then open this file in Photoshop. Under Image / Image size, you'll see a window that looks like this:
Someone to video, the important part of the image window is the pixel Dimensions. We don't care anything else. The resolution of 72 pixels per inch is incidental to us.
However, if I wanted to print the image, things get interesting. As you can see in the window, if I print at 72 pixels per inch, I get an image located at more than 8 X 6 inches. The problem is that nobody prints at 72 dpi. We print at 300 dpi or more.
So what happens. Instead of a nice printed in large print, we get something much smaller as shown below.
Basically, we get a big stamp.
What you may be asking, however, is how to get an image of 640 X 480 pixels, expanded to a size that would print this image, using 300 ppi, to size 8 X 6. The word for that is not exactly resolution. Not for us. The word that is upscale. Make it bigger. More pixels. Pull pixels out of the thin air and assign them to the scene in the picture.
The answer to your question is probably quite simple. No, you can't get better resolution, unless you it upscale in Premiere Pro, and it is not the right program for the task.
It upscale in Photoshop. Or buy an app party designed for high-end frame grab something you can print to a decent size.
-
How do I move the image through the selector properties
I can't figure how to move the position of the image (after it is established in the selectors) via properties. May not place an image EXACTLY where you want? For example, I want to do this:
< section class = "sectionLeft" >
< h3 > < p > In the News... < /p > < / h3 >
"< img src="img/index/downeastdognewslogo.png "width ="204"height ="30"alt =" "/ >
< / section >
With CSS, I should be able to play with the padding and the position, but it seems that I can not move it at all. However, I can put a picture as a background and the place where I want to but a single background at the same time.
I could provide more HTML and CSS if you want, since it is only the index far page, and it's short enough.
Help, please. Thank you.
Post edited by: Erik Johansson
I added the following. In your case, you can adjust the margin values according to the needs.
.sectionLeft img {}
display: block;
float: left;
margin: 15px 0 0 30px;
}
-
Move an image in a picture box
Hello
This may be a simple question, but once you have a picture within a picture box, how you move without moving the image around her area? I tried the white Selector tool and the hand tool, but it didn't work. Please notify.
Thank you
The white 'Sélection' tool should have done the tour. You click on the image or the image? You need to click on the image and then you can move it with the arrow keys, or you can press the tool and retrieve the image and move it.
Dave
Maybe you are looking for
-
The problem started when I downloaded the beta version of Firefox version 4. I've just updated to version 5 and I am still having the problem. I have a central button on mouse pad that allows me to go up and down pages without clicking on the sidebar
-
How can I Reset forgotten password
How can I Reset forgotten password?
-
How to automatically start apps in order under Windows?
I am writing from an XP laptop (have not found a suitable replacement yet) but it would be good to know how to do this on any version of Windows, but I would like to know how to start automatic apps on connect to open a folder, my Live Mail app opens
-
Z30 BlackBerry HOW to CHANGE BLACKBERRY ID IN Z30
I bought a Z30 in Dubai. It is with my cousin in Dubai, where he had used this Z30 for BBM with his email ID and password. now, he had sent the handset in India. then, try to configure my blackberry id in this game of hand (z30), it shows my cousin o
-
My friend bought a legitimate Windows 7 Professional OEM System Builder Pack copy when he bought a new computer. They installed and then discovered that they had made a mistake and he was 32-bit instead of 64-bit. So he uninstalled the 32-bit syste