Move the object when textbox expands

Similar Questions

• Why can't change size and move the object when I do the pdf a document from windows?

  I got my shipping label that came in a .pdf file to a .doc because it had to be smaller than what was sent to me.  But now I can't modify the object, there is no transfer as a single item, each piece of the shipping label needs to be moved.  Are there not an easiest way without having to pay more money once more.  I've already paid to be able to transfer PDF to doc but it is pretty useless, and I would like to just get my money back!

  The exported content reflects what the PDF Creator has pushed into the PDF. What you're saying, it seems the PDF creator uses a routine of PDF creation poor or provided an image that has been put in the PDF file.

  If the PDF file is just an image (or policies described, which are essentially a fancy characters image) then what is exported image. The export of 'chunks' can cause a 'source' image that is formed by "pieces".

  So, you paid for the export capacity & that's what you have.

  Basically, you want to get a better quality PDF.

  Be well...

• Cannot move the object

  Hello

  I scanned a drawing that I place on it's own layer from the office, he was directly drawn, expanded and consolidated.

  When I select to move it, either using the arrow keys or the transformation/move command, I get a message that I've ever seen before "cannot move the objects. "The requested transformation would make some objects fall completely the drawing area.

  Could someone explain what it means?

  Thanks for any advice.

  Occurs usually when you have a wandering point or a selected guide. Zoom out all the way. You have something that is going to the grey area (outside the mount table) completely.

• DPS: Judge to use the parameter Raster or vector in the States of the objects when the majority of the page is a photo. What is the best setting for the overall performance?

  I am trying to decide whether to use the parameter Raster or vector in the States of the object when the majority of the screen is a picture (with a modest but important legend for children to read). The legend certainly makes it look more net as vector. But does the photo! The raster setting seems to make the lower-res images in comparison. In my first edition of my application, I thought that raster would be the best setting when the photo was the subject dominating the page. But now, after seeing how strong he looks like vector, (but with almost a refresh of the unacceptable time. Perhaps better on the latest iPad. Most of my readers/students in class will use iPad 2 s, which has a slower processor). I wonder if I should go through the trouble of changing States of photo objects that have the type as well to the vector. It doesn't seem to be as sensitive to a re - draw on the iPad 2 (non-retine)

  Is Filesize hit if I make about 1200 on these objects range from Raster to vector? (It is a huge, highly interactive history book, so I'm curious if acutally go to vector on these photos would reduce the size of the file) What is the best setting for the overall performance?

  I see the freeks screen outside for a bit if you try to pinch and zoom in a vector object (photo) vs raster. Which is disappointing. Does slow down load time/refreshment in frame, which is a little less. I also found that the drop shadows really bad that redraws effect in vector, almost vibrating in a slide show, for example. Thus, in cases where I need shadows, I'm sticking with Raster.

  All tips go ahead?

  Brian

  Does that help? http://boblevine.us/Digital-Publishing-Suite-101-keep-text-sharp-in-raster-slideshows/

• I opened a high-density .tiff file in photoshop, but I can't move the object

  I opened a high-density .tiff file in photoshop, but I can't move the object

  Chances are that the image is the same size as the document. You can either add Web Image > canvas... size , use the crop tool and do drag outwards to create more space, or reduce the size of the image ctrl-t or command-t then scale the image inward.

• Related objects move the position when impaired in the original software?

  In our business we must place the Illustrator works on empty packaging photographed to show our clients what she will look like before packing real impression with our designs.

  So I'm looking for in the related objects in Photoshop, so I will not distort the images of the work, every time, and it will look the same every time.

  But when an object in Photoshop is changed in Illustrator and I will return to the psb Photoshop created (by double clicking the object bound to the Photoshop file), the complete works move its position.

  I'm doing something wrong?

  I think that the option you mentioned is to Page, which is what you want, but you want to change the dropdown to the right the second choice:

  

• The display area moves and focuses on the object when it is selected

  I recently downloaded 6 Captivate and when you edit a slide if I select a subject it focuses on the object and he spends a large part of the blade out of the display area.

  For example, I'm working on a blade with about 10 possible answers multiple choice quiz and as I change these answers he focuses on the first answer while he is sitting on it. For me change the background display options I manually move the slide because I can see them no longer.

  I'm sure that there is a simple answer, but I checked the preferences, opinions, online forums and I can't find anything on this and it's driving me crazy.

  Thank you!

  Hello

  You can also view > view and then zoom back, to decrease the size of the slide in the main pane.

  Or

  If there is no unexpected behavior when you use the workspace or by using features, you can reset the preferences:

  Here is the procedure:

  Captivate's preferences folder location is:

  [Windows 7: C:\Users\[user name] folder of Captivate 6 \Local\Adobe\Adobe \AppData (hidden folder)

  Windows XP: Settings\Application Data\Adobe\Adobe Captivate 6 record - [user name] C:\Documents and Settings\

  Mac: /Users/ [user name] / Library/Preferences/Adobe Captivate 6 folder

  You will first need to close Captivate 6 and then rename the folder 6 Captivate 6_OLD Captivate.

  Then restart the captivate and check if this solves this problem.

  Re-create the preferences resets all settings and customization of Captivate, but won't have any changes to your project.

  Thank you.

• Check the distance between the objects when the window is resized (was: Muse Help)

  If I build a new website havn't Muse widely used yet, and I encountered a problem.

  http://jart01.BusinessCatalyst.com/index.html it comes to my test site, as you can see at present still very basic. Now, I'm trying to understand how I can control the distance between objects when the window expands or contracts, there seems little of the larger window and the gap between objects. Does anyone know how to set limits to the distance between them?

  I also tried to create a divisor of 100% for the Nav menu and can't get there either. So if someone could put me on the right track this would be great.

  You must define the flow layout and do the 100% resizable images. Who must work in Muse CC 2016

• arrows move the object in opposite directions - default type in vertical orientation

  Hi Illustrator community.

  Two questions were really annoys me and so far I've been unable to find a solution:

  On my Macbook Pro 13, 2012 ", in this version of Illustrator CC (not a problem for other products CC), the arrows are somehow put out: using the left/right arrows moves objects vertically, and using up/down arrow keys moves objects to the left and right." Even if I tried to get used to it, it's really slow me down I checked the preferences and keyboard shortcuts, and unless I'm missing something, there seems to be a setting for this?

  Also when using the standard tool (not the vertical type tool), initially type is placed rotate 90 degrees counterclockwise, and after that I flip back to a horizontal position, I can move and edit fine. Any suggestions?

  Thanks in advance,

  Mark

  Mark,

  Edit > preferences > General > constrain Angle should be 0 degrees.

  If this is the case, Illy may think, it is not, and then she made a mess of things (and perhaps other things, too). In this case, it may be time for the list below.

  Unless you subscribe to the vertical version.

  The list:

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

• move the object left and right

  Hi, how are you all? I hope you all well...

  Now IAM trying to do more spells for the hero and this spell is the fireball

  I want to spend the time the hero is on the right also leave when the hero on the left

  I tried with this code when you press w it should move 10 or 20 px then it must stop

  but the fact of idont this step "then it must stop" because of this error as the fireball, call

  like I want to

  TypeError: Error #1010: a term is undefined and has no properties.

  Hero / onEnterFrame)

  Here is the code

  HERO class

  package {}

  
  import flash.display.MovieClip;

  import flash.events.KeyboardEvent;

  import flash.ui.Keyboard;

  import flash.events.Event;

  import flash.sensors.Accelerometer;
  import flash.media.Sound;
  import flash.media.SoundChannel;

  
  SerializableAttribute public class extends MovieClip {HERO
  var NIGHTJUNGLE:nightjungle = new nightjungle
  var ELECTRICALSHIELD:electricalshield = new electricalshield;

  var speed: int = 3;
  var fireballindex:Array = new Array
  var dir:int;
  var ELECTRICITY: electricity = new electricity;
  var SOUNDCHANNEL:SoundChannel = new SoundChannel
  var firespeed:int = 50
  var i: int
  public void HERO() {}

  addEventListener (Event.ADDED_TO_STAGE, onAddedToStage);

  }

  public void onAddedToStage(event:Event):void {}

  addEventListener (Event.ENTER_FRAME, onEnterFrame);

  stage.addEventListener (KeyboardEvent.KEY_DOWN, onKeyDown);

  stage.addEventListener (KeyboardEvent.KEY_UP, onKeyUp);

  
  SOUNDCHANNEL = NIGHTJUNGLE.play (1,1000)
  gotoAndStop (4);
  

  }

  public void onEnterFrame(event:Event):void {}

  x += dir * speed;
  {if (fireballindex [i] .stage)}
  .x += fireballindex [i] 1
  }

  }

  public void onKeyDown(event:KeyboardEvent):void {}

  If {(event.keyCode is Keyboard.RIGHT)

  gotoAndStop (2);

  dir = 1;
  Speed = 10
  If (ELECTRICALSHIELD.stage)
  addChild (ELECTRICALSHIELD)
  

  }

  
  If {(event.keyCode is Keyboard.LEFT)

  gotoAndStop (1);

  
  dir = - 1;
  Speed = 10
  If (ELECTRICALSHIELD.stage)
  addChild (ELECTRICALSHIELD)

  }

  If {(event.keyCode is Keyboard.UP)

  gotoAndStop (1);

  y = 10;

  }

  If {(event.keyCode is Keyboard.Q)

  Speed = 30;

  addChild (ELECTRICALSHIELD);
  SOUNDCHANNEL = ELECTRICITY.play)
  
  }
  If (event.keyCode == Keyboard.W) {}

  
  fireballindex.push (new fireball())

  addChild (fireballindex [i])
  fireballindex [i] .width = 50
  fireballindex [i] .x += firespeed * dir

  i ++
  trace (i)
  }
  If (event.keyCode == Keyboard.E) {}
  MovieClip (parent).aa.x = x + 100
  }
  }

  public void onKeyUp(event:KeyboardEvent):void {}

  If {(event.keyCode is Keyboard.Q)

  If {(ELECTRICALSHIELD.stage)

  removeChild (ELECTRICALSHIELD);
  If (SOUNDCHANNEL! = null)
  Speed = 0;
  SOUNDCHANNEL = ELECTRICITY.play (1,1)

  }

  }
  If {(event.keyCode is Keyboard.W)

  
  }
  

  If {(event.keyCode is Keyboard.LEFT)
  Speed = 0
  gotoAndStop (3);
  If (ELECTRICALSHIELD.stage)
  addChild (ELECTRICALSHIELD)

  } Else if (event.keyCode == Keyboard.RIGHT) {}
  Speed = 0
  gotoAndStop (4);
  If (ELECTRICALSHIELD.stage)
  addChild (ELECTRICALSHIELD)
  }

  }

  }

  }

  Thank you

  I would not use 'i' to target the object of the fireball.  In the case of the fireballs to withdraw at any time, that the value of i will be false.  The fireball that you add may not of fireballindex [i].

  If all the code that goes in the same neighborhood, then I declare the instance var name and use the name...

  var fBall:fireball = new fireball();

  fBall.name = "fb" + String (i)";

  fBall.width = 50;
  fBall.x += firespeed * dir;

  fireballindex.push (fBall);

  addChild (fBall);

  i ++ ;

  Later if you need to target this fireball, you can use the table or you can use its name.

  If you still want to use the non-var approach (I see no reason to) then instead of target

  fireballindex [i]

  I would target the last element added to the matrix who is definitiely going to be

  fireballindex [fireballindex. Length-1])

• Move the object object vs. copy

  OK, the assistants of the Illustrator, I have another puzzle - it is more often the case (more often) that when I call the command move what I really want to do is to copy the intended purpose x or y inches. The command move has a button for copying, but the default action is to move. Is it possible to change the default action to copy? or y at - it another command I should use? I would like a simple method to make the x - up for printing layouts.

  Thank you!!!

  -g-

  You could grab the object, press the alt key and move it. You can enter a new x-y-value or in the transform Panel, and then press alt + enter.

• Help, please. New CS 4 error: cannot move the objects. the requested transformation would make some objects fall completely the drawing area.

  I know that this is not a 'new' error message, but I never got on the previous versions of Illustrator. I just upgraded to CS 4 and get it now on almost all files when I try to move an object in any direction. Not that it matters, but these are files that were created in previous versions of Illustrator and I never had this problem. I followed the instructions of similar positions without success. I zoomed way toward the edge of the art Council: there is no hidden layers, objects or guidelines, no persistent points of the guidelines are erased, or objects of any kind anywhere near the edge of the box art (which, I know it, is huge compared to the size of my working paper of 11 x 17)

  What Miss me?

  In addition, on occasion, when I CAN move an object (usually a JPG or PDF image that I placed in the document), the image disappears. I think it is always 'there' even if I'm not. Any suggestions?

  Is it possible that your keyboard Increments area struck a giant number? Check under general preferences. (removal of preferences would also reset it)

  Also, to double check - when you zoom in completely to where you can see the limits of the editing table (so you're zoomed out to like 5% or something like that) UNlock all United Nationshide all and select all, is your framework of selection within your page?

• Move the object to the mouse click

  Hi all!
  I'm in a group of study at Aalborg University in Denmark, where we are currently working on a small game Flash, nothing big, nothing fancy, just a part of a small project.
  
  I am currently working to set up one small card game, a card where a character can walk and talk to the NPC and other. We just started to I'm pretty much just working with the basics here. Everything has started to learn AS3 too. I created an object, in this case a circle that gets drawn when I run my code DID, the circle is drawn in the Hugo to my step. What I want, since the game is isometric and moves in these isometric lines rather than upward, downward, to the left, right, I want to do a funktion where, if the mouse is clicked in a place where the X coordinates and are below where is the object, then the object moves to the square.
  
  I hope you can follow me on this point, otherwise, please tell.
  The code I have is for the moment:
  
  

• Cannot move the window when hiding the menu bar

  I can't drag the window of firefox when hiding the menu bar. Looks like by dragging the empty box next to the tabs does not work. I have to activate the menu bar which is pretty ugly, whenever I want to move the window. Any advice?

  You can try the pref browser.tabs.drawInTitlebar true to turn on the topic: config page.

  You can also consult the extension Classic theme restaurateur.

  • Restorer of classic theme: https://addons.mozilla.org/firefox/addon/classicthemerestorer/

• Ref: move the image when the mouse moves.

  Sorry! actually Sir, according to my mission, I have 2 images I added to the second image horizontal manager.in a few features missing that 1 one.so when the user learns the thing missing it clicks on this place and the missing functionality will be appear.so fo peripheral not touch, I need an arrow like image to move images .it should work as the arrow in the painting of .whereever user move mouse the arrow moves accordingly... Can you help me?

  A good start.

  You must call invalidate() after you move the x and y to make the field to extricate himself.

  You should not call invalidate() in your method of painting, that it in fact repeatedly paint.

  Let us know how get you a copy with these changes.