MP3 128 Kbps and 192 Kbps can you both on the rocket?

Similar Questions

• I use systec usbmodule1 to send and receive messages CAN one have tried this in labview?, if so can you send me the code please

  I use systec usbmodule1 to send and receive messages CAN one have tried this in labview?, if so can you send me the code

  Thank you

  Hey,.

  All our drivers CAN have been written for CAN of National Instruments hardware (referenced here: http://digital.ni.com/public.nsf/allkb/E2C6ED025C798C5586256F4E00520448 ). So, you will need to manually, code all your communications unless Systec provides a LabVIEW driver. There could be several dll files Systec provides for communication, which you will be able to access through LabVIEW. Take a look at the node of library function call, which is in the range of functions under connectivity-> libraries & executables. Here, you can call a dll file, as well as the different functions in this dll.

  I suggest posting your question either on the forum of LabVIEW, as mentioned previously, or on the forum CAN found here: http://forums.ni.com/ni/board?board.id=30

• I have the old version of photoshop cs a perpetual license. But I can not activate the license via internet and phone. Can you help me?

  I have the old version of photoshop cs a perpetual license. But I can not activate the license via internet and phone. Can you help me? @

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• I have 2 accounts of adobe Setup and want to merge to 1. My Behance site is a different connection/e-mail than my creative cloud. So... When I'm connected to CC, I can't see my Behance site and updated. Can you please help?

  I have 2 accounts of adobe Setup and want to merge to 1. My Behance site is a different connection/e-mail than my creative cloud. So... When I'm connected to CC, I can't see my Behance site and updated. Can you please help?

  Please contact our support staff from the following link for assistance on this subject: https://helpx.adobe.com/contact.html

  (be sure to connect to adobe.com with your Adobe ID first)

• Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  I am going to Japan November 2016 and plan to buy unlocked (no sim) iphone to use in my country (Thailand) 7.

  However, I have read some post on 'mode of politeness' in Japanese phone but the conclusion is not clear whether you can disable shutter sound (without sim) unlocked iphone 7 or not. Then, someone could share on the current situation?

  Thank you

  No, its required by Japanese law shutter. Even if the iPhone is

  is no longer in Japan, you will not be able to turn off the shutter sound.

  You should also check with the seller to be sure you can get the

  iPhone unlocked from the Japanese wireless provider to use with your

  carrier in Thailand. And check that the iPhone is unlocked before leaving the

  retailer.

• I'm using Firefox Portable and lack the 'Extra' _Menue been updated to Version 11. And "No, I can not add with the toolbar customization."

  I am using Firefox Portable and lack the menu "Extra"since updated to Version 11. And "No, I can not add with the toolbar customization."

  What is this extra menu?

  In some languages of the menu Tools is called Extra, so you can watch in this menu to see if you can find what you are looking for.

• I have to log on to a web site under 2 different companies, but I clicked on 'remember login' for one and now I can not simply to the start page to open a session to the other company - he continues to go to the page for the first.

  I have two companies for which I connect to an Internet site for the data. I clicked "remember me" for the first company and now I can't get to the home page to open a session for the 2nd, he just guard logging in for the first.

  You can also try one of these:
  CookiePie: http://www.nektra.com/oss/firefox/extensions/cookiepie/
  CookieSwap: https://addons.mozilla.org/firefox/addon/3255
  Multifox: http://br.mozdev.org/multifox/

• I have updated and now I can't get on the internet

  I finished the new update and now I can't get on the internet? How can I fix it?

  What happens when you try?

• Can you be more the pair an iPhone with an iMac?

  Apple support said I should use Air Drop to share files between my iphone and my iMac (both running newer systems) in response to my request for advice as to why I could not pair them up. Seems odd to me because in the devices section on the Mac (under Bluetooth), I can see iPhone and an option to connect to the network, but I said that the network is not available. My keyboard, mouse, and trackpad all work fine so any advice would be very welcome. Or can you be more the pair?

  My pair of iPhone perfectly with my car for hands free calling.

  It has never been possible to pair an iPhone to a computer (Mac or Windows) for any purpose, with the exception of personal hotspot (internet tethering) and then only if the plan from your cell phone carrier is supported. Things like Airdrop involve Bluetooth but the devices are not matched. See below for more information: Bluetooth: why can not connect my iPhone or iPad with another iOS device or my computer?

• I had to restore my computer to factory settings and now I can't get on the internet

  I had to restore my computer to factory settings and now I can't go on the internet. I have Windows 7

  Hello

  When you perform a restore, you may need to reinstall the network drivers, etc..

  As you can not access the internet on the recovery computer, use the computer that you are on to get here to do this.

  Go to the website to make your computer > Driver and Software Support Section > find your computer model number > then your operating system > locate drivers Windows 7 > download and install the desktop > copy to flash drive > transfer onto the repaired computer.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  You can download all the drivers this way, or once you have network and/or pilots Wi - Fi installed get the rest downloaded directly to the repaired machine.

  See you soon.

• I got my PC back to the original (as it comes in the box) and now I can't go on the internet.

  I got my PC back to the original (as it comes in the box) and now I can't go on the internet.  What should I do to achieve this?

  Contact your internet service provider,

  You can either reset your dsl modem / cable modem / software disc.

  If your wireless network, you have to reenter the wireless network / password. (if applicable with other computers to use it)

• I lost my hp laserjet 1005 p driver can you send me the driver?

  I lost my hp laserjet 1005 p driver can you send me the driver?

  Hello:

  Here is the link to the support page and drivers for your printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3435675&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3435674

  Paul

• "installation is damaged and cannot be opened, you must eject the disk image".

  After you download the master creative suite 5 and then try to install the load down, I got this message and could not install the load downwards;

  "installation is damaged and cannot be opened, you must eject the disk image".

  What does that mean?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI

  Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI that he keeps giving me a message that the serial number I have providede is valid but calling it a product was not found on this computer. I again downloaded the software installtion of my account page and sitill keeps making the same problem. Do I need a new license?

  Hijeanm9453734 ,

  Seems that Acrobat XI was an upgrade from the previous version. You need choose your earlier version of Acrobat, comes its serial key to activate the upgrade Acrobat XI.

  Kind regards
  Nicos

• ? I downloaded the update this morning - 06/06/12 - and noew I can not enter in the develop module.

  ? I downloaded the update this morning - 06/06/12 - and noew I can not enter in the develop module. I get an error message.

  The problem seems to have been fixed. When I checked to make sure that all the other modules are accessible, Lightroom 4 quit, rebooted and then checked something - "power point curves", went through a kind of internal procedure, after having whiuch the problem no longer existed. The error message was: "an error occurred when attempting to change modules." I decided to respond this way in case somebody stumbles into that.

  Thank you for responding.