laptop is no longer connect with my TV using a HDMI cable

He works a few hours earlier, then the laptop came into fashion "sleep" after that I stopped looking, and I went on regular TV.

When I tried to reconnect to watch something on the laptop, it would not connect more... it just says: NOT of SIGNAL, while the computer works fine.

I tried different cable HDMI and the different INPUTS HDMI as HDMI1, HDMI2... It was the same NO SIGNAL.

Additionally, after you have uninstalled the driver, try to install later on the manufacturers Web site.
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • I currently use an HDMI cable to connect my laptop to my TV for streaming video. Anyway is to close the Mac but still flow from it? Right now it just runs in "standby mode", and the connection is lost.

    Hi all

    I currently use a HDMI cable to the video stream from my MacBook to my TV. It works fine except that it doesn't seem to be a way to close the laptop and always maintain the connection with the TV. First of all, I do not leave my laptop open, exposed if you want, when you're arms reach. Then, when it is connected to the TV, it is at least 2 to 3 yards away. In addition, I have recently adopted a cat. His favorite thing to do is to tap dance across the keyboard. Therefore, I am more able to let the laptop taken in isolation within the connective range of HDMI cable because the cat will walk on it. In any case, I tried to find a way to close the lid of the laptop, the laptop to stay awake and keep the connection to the TV. Any ideas?

    Thank you

    Sally

    See if there is a solution:

    https://support.Apple.com/en-us/HT201834

    Ciao.

  • I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

    I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

    OS X El Capitan: use your TV as a monitor

  • Trying to connect my laptop to an HDTV using an HDMI cable. Error I get is "signal".

    I use window Vista on my laptop. I'm trying to connect my laptop to my HDTV. I connected the two with a HDMI cable. The error I get on the TV screen is 'signal '. Is there some settings that need to be changed?

    All imput would be appreciated.

    Kite_99

    http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

    http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

    http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

    Read the info on the links above.

    See if that solves the problem.

    See you soon.

    Mick Murphy - Microsoft partner

  • No sound from the TV using a HDMI cable not connected to the laptop ASUS G75VW.

    I have an ASUS G75VW, when I connect the HDMI to my TV, I get only audio through my computer laptop speakers or headphones, while it is plugged.  In addition, the TV picture is only 480 p.  When I check the sound icon, it shows that the HDMI port is "not connected" even though it is.  I tried to uninstall and reinstall the driver on both the NVIDIA site and the site of ASUS.  Same question.  Help, please!

    Hello

    Make sure that it has the TV volume.

    You can also make sure that the connections are appropriate. Try to connect to another HDMI port as well.

    Refer to the section: "Check if the cables are connected correctly" and set the HDMI audio device as the default value.

    No sound in Windows

    I also suggest you to consult the steps mentioned by "Karthik Vengaloor responded on 14 January 2013" and perform useful methods.

    Reference:

    Windows 8 audio via hdmi on desktop cable

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-8-audio-through-a-HDMI-cable-on-desktop/79aaa786-8311-4FA2-8206-0e57b8861baf

    Hope this information helps. Response with status so that we can help you.

  • Slow connection with 9 EMU using mandatory profiles with the folder redirection MSFT (Windows 7)

    I have been recently UEM9, AppVol 2.10 in my environment of Horizon 7 on some Machines Windows 7 Linked Clone (systems no-no intentionally) initially the connection time was around 30secs with Agent display 7, UEM9, AppVol 2.10 installed with a mandatory profiles with the folder redirection MSFT (Windows 7), but as I expanded stable about 30 user... and they started to use the system on a regular basis I started to do & see logins for one more minute. Nothing has changed in my environment and the material is extremely less use so Im trying to figure out what is causing the delay in the connection. Does anyone else know extremely long connections using UEM9?

    I could solve this problem by updating 10.0.6 to 10.0.8 vmware tools. This login corrected and the performance of the virtual desktop.

  • Can not connect with the FTP using NAT server.

    Hey, people!

    One machine in the net 200.2.2.0, with ip 200.2.2.222 (ftp client) must connect

    with a server FTP, using the ip 201.1.1.222 nat, but who can not connect.

    A newspaper using, serial interface, I saw the server response to the connection request.

    Using a different disconnection, in fas0/1 of the interface, I don't see the response from the server, I can

    not to see if nat has been done.

    Why?

    What's wrong?

    What can I do?

    To put this machine in another NET, 201.1.1.0 is so hard!

    Look, a router interface has ip 201.1.1.1.

    !

    interface FastEthernet0/0

    IP 201.1.1.1 255.255.255.0

    No cdp enable

    !

    interface FastEthernet0/1

    IP 200.2.2.2 255.255.255.0

    IP nat inside

    No cdp enable

    !

    interface Serial0/0

    Description INTERNET

    IP 100.100.100.30 255.255.255.252

    NAT outside IP

    No cdp enable

    !

    IP nat inside source static 200.2.2.222 201.1.1.222

    no ip address of the http server

    !

    Thanks in advance,

    Renato

    Hello Renato.

    also, it shouldn't make a difference, because your access list allows any last statement, try and add the following line to your access list:

    access list 103 permit tcp a whole Workbench

    access list 103 permit tcp any newspaper host 201.1.1.222 eq ftp

    --> access list 103 permit tcp any what newspaper of host 201.1.1.222 eq ftp - data

    access list 103 permit tcp any newspaper host 200.2.2.222 eq ftp

    --> access list 103 permit tcp any what newspaper of host 200.2.2.222 eq ftp - data

    access list 103 permit tcp any any 0 65365 range journal

    access-list 103 allow udp everything any 0 65365 Beach

    access-list 103 permit icmp any any newspaper

    access-list 103 permit ip any any newspaper

    Also, try to remove the access list together and see if that makes a difference...

    Kind regards

    GP

  • Satellite Pro C850 - 1 K 3 can't connect to a TV via an HDMI cable

    If I use either F4/the windows key + P and select duplicate or PC screen only (or another option) and then plug it into the TV, so the laptop screen and the TV screen are blank. By pressing any key does not display anything on my laptop screen, then when I unplug the HDMI cable that it happens with the second screen only option highlighted. My laptop strangely ignores what I click and returns continually to this option and unfortunately, I can't project the screen on any monitor (I tried 4 separate monitors).

    My laptop was able to be plugged into a TV and I did this several times, but as far as I know this stopped when I had a windows 8.1 update (my assumption, I don't know). I searched the web for solutions, and none have worked. I tried the method of detection of the monitor through the resolution on the desktop option, but again, this cannot be done because I don't see anything on the screen when my laptop is plugged into any TV, and I tried many times.

    Any help is appreciated

    Thank you very much

    I use Toshiba laptops a few years now and what I can say is that you need to connect your laptop to the TV first, select the right port on the TV and then use key FN or F to change between TV Office laptops and connected.
    Connected TV or another external device must be established first.

    Please test once more.

  • Satellite A100-784 - connect to the TV via a HDMI cable

    Hi friends,

    I have a Toshiba Satellite A100 - 784 PSAANE. Its a product abandoned now :-( I wonder if I can connect this laptop with the Sony Bravia LED TV via HDMI cable.
    I'm not able to find if the laptop is compatible for it.

    Please help me a way to find a solution to connect the led TV and how to do it? Please also help with the cables needed for the same thing.

    Sorry guys, I'm quite naïve HDMI company.

    Thanks for all the help,

    Kind regards
    Perkins

    Hey Buddy,

    What do not know exactly?

    The laptop has only VGA and S-Video output port but no HDMI port. So that you can t connect the laptop to the TV because you can t connect the HDMI cable to your computer.

    If your TV is VGA or S-video port, you can use this cable. After the connection to the TV, press the key combination FN + F5 to switch between monitors.

  • Connect XPS 17 LCD TV via HDMI cable

    I have a XPS 17 L701X- and I'm trying to connect it via HDMI cable for a 32 '' LCD TV Phillips girlfriend with backlight. However, no matter what I try, the laptop never acknowledges that the TV is there and vice versa. I tried to restart, reinstall the video drivers, fiddling with settings in the control panel for multiple screens, tried two new HDMI cables separated from Amazon - and nothing works. (The TV works fine when it connects its Macbook via HDMI). Can someone please help?

    Well Mitch, I advanced and bought this adapter part and, lo and behold, the work of workaround! First try also (at least in my case)-without debugging or diagnose.

    Process, my three steps:

    (1) I plugged the adapter Mini DisplayPort for my XPS (around the back next to the HDMI port); (2) I connected the HDMI cable to the adapter (the other end of the cable is already connected HDTV); (3) I have pressing F1 on my XPS and duplicate selected (key Windows + P or "Connect to a projector" If you work via Control Panel).

    (I used StarTech Mini DisplayPort HDMI adapter)

    -site of the factory that it lists as $22, but I bought mine from a local store of tech for less than half that price. I hope this helps!

  • Z580 help: connect to the TV via a HDMI cable

    I recently had my father the IdeaPad Z580. It is really eager to stream its videos and watch them on TV. I connected it today via a HDMI cable and got really excited when the screen was reproduced on the TV... but then, when I clicked on internet Explorer tile, I got the following error message:

    This application cannot open
    The screen resolution is too low for this application to run.
    Change your screen resolution

    Seems simple enough... but really did not have a clue what to do! Doesn't help that I'm a complete newbie to Windows 8!

    I'd be really grateful if someone here would be able to help / tell me what to do! ^^

    Thanks in advance!

    All of a sudden it works without enaything. In fact, I just do a windows 8.1 update.

  • laptop is no longer connects to the wifi at home

    Computer Dell laptop for my son will connect is no longer our home wifi. It's just less than a year and work very well so that there is one month. Other devices (other laptop Windows 7, Windows 8 Wallpapers xbox) connect without problems. It is a Dell Inspiron N7110 under Windows 7 Home Premium, Service Pack 1. The laptop detects the network and said that the signal strength is 'good' or 'excellent', yet he seems stuck in the login process, cycling between saying 'sign in' and 'limited access' next to the network name.  At the top of the login window, it says currently connected to: identification... (network name)  not followed by any network access.  I tried running the convenience store and reset the network card, but this has not solved the problem.

    Any help would be greatly appreciated!

    Hello
     
    It seems that you are facing problems with connecting and using the wireless connection.
     
    Method 1: I suggest you to follow the steps from the link and check if it helps.
     
    Method 2: If the problem persists, I suggest you to follow the steps from the link and check.
    For reference:
     
    Hope this information helps.

  • Older Acer laptop is no longer connects to the wireless network.

    I have an older Acer, an Aspire 4520 laptop.  When my ISP (Qwest) replace my router and the modem with a modem/router all-in-one (Westell 7500), the laptop was the one computer in the network which was not able to connect.  He does not reject the password (if I type in the right), but tells me my connection attempt has timed out.  I typed the password wrong once to see what would happen and he told me that the password has no agreement with that of the router.  In any case, I connected the computer to the internet, then tried the fix to http://support.microsoft.com/kb/928233running, but that did not work.  I looked my material and saw that the Atheros AR5007EG Wireless Network Adapter and the NVIDIA nForce Networking Controller were working properly.  I did not cheat with the dissemination in the registry setting, because I don't really know where to find it or what to take if I did.  In addition, the computer logs on other networks without wire (at McDonalds).  Any ideas out there?
    Keith

    Hello

    Follow the steps mentioned below and check if that helps.
    Method 1: temporarily disable the Antivirus and firewall and check out them.
    Disable the anti-virus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
     
    Method 2: Follow this link and check if that helps.
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03
     
    Method 3: Reset TCP/IP (Transfer Control Protocol / Internet Protocol) settings
    TCP/IP can sometimes become damaged or altered.
    How to reset the Protocol Internet (TCP/IP)
    http://support.Microsoft.com/kb/299357
     
     

  • Computer laptop WIFI does not connect with wifi printer.

    How do I reconnect my laptop windows 7 for my Kodak ESP 5250 without an installation disc, has had a problem with the laptop don't talk to my printer after a few years of no problems, he was advised to uninstall the printer, which I did not realize that I had lost my installation disc. Can someone help me please. ? (kath)

    You can try here...

    http://www.kodak.com/global/mul/service/index.html?reqURL=http://support.en.kodak.com/app/answers/list/kW/Kodak%20ESP%205250,%20Driver/selected/true

    It's a small file, and honestly, I don't know what function you will get...

  • The display is inconsistent when I use a hdmi cable to connect my laptop to my tv

    I have a HP Pavillion laptop with an HDMI port.  Recently, when I connect my lappy to my TV Sharp display on my tv is only the lowest possible resolution and not in widescreen.  He comes to work correctly with a very high level of HD but connection only recently started to do this.  How do I return to watching high-resolution video on my tv?

    Hello

    -Have there been any changes made on the computer before the show?

    Perform these steps and check if that helps.

    Step 1: I suggest you to update the display drivers.

    Update a hardware driver that is not working properly http://Windows.Microsoft.com/en-US/Windows-Vista/Update-a-Driver-for-Hardware-that-isn ' t-work properly

    Step 2: Once this is done, go to the display settings and change the screen resolution to the highest value that takes care of your TV and check.

    Change the screen resolution

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

    Get the best display on your monitor

    http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

    Hope this information is useful.

Maybe you are looking for