Mr. Fix it does not 0X803C0107 error code

I installed earlier Mr. Fixit. Today, whenever I try to run something, I get an error code0X803C0107.

What is the problem?

Hello
Try this page... just select the one you need:
http://support.Microsoft.com/FixIt/
b Eddie

Tags: Windows

Similar Questions

Fix it Center does not open error code 0 x 80092003

Fix it Center does not open error code 0 x 80092003

Hello Evertonia,.

If this happens with a fixit tool, then you will need to request support via the link given by Diana D.

Best regards

Matthew_Ha

Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

Original title: windows updates 7

Updates to the computer have been OK until MS net framework has been improved from 3.5.1 to Ms. Net framework 4 who do not go in. several attempts have been made to install but still got error codes. . Since then, updates only install are removals of malware. Silverlight will not install either. Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

I am at a loss... Anly help would be welcome.

1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.

Press enter

3. open Control Panel > Windows Update and Windows 10 should begin to download...

If this does not work:

Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
See the instructions: How to download official Windows 10 ISO files

Task of pre-required

When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

DVD player does not work error code 36 please help

I have a computer toshiba laptop satellite my dvd rom is not working, it does not give me the error code 36

Hello

In addition to the BIOS settings the player himself could have problems.

-------------

This instrument requires a PCI interrupt but is configured for an ISA interrupt (or vice versa).
Please use the computer's system setup program to reconfigure the interrupt for this device.
(Code 36)

Interrupt request (IRQ) translation failed.

Try to use the BIOS Setup tool to change the settings for IRQ reservations (if such options exist). The BIOS can have options to reserve certain IRQS for interconnection of peripheral components (PCI) or ISA devices. For more information about changing the BIOS settings, see the documentation for the hardware.

On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.

--------------------------------

Check with Toshiba support

Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

Toshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

Toshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

Toshiba - Forums
http://laptopforums.Toshiba.com/

===========

If you have problems after checking the BIOS settings:

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

System Restore does not work; error code 0 x 80070715

System Restore will not restore an error occurred in the initialization of the program if the problem persists contact your system administrator. I tried 3 times still not work error code 0 x 80070715. Help, please.

Hi margZX

See if this post by Stephen Boots helps.

http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/how-do-i-fix-an-error-code0x80070715/c73c6aa1-0770-E011-8dfc-68b599b31bf5

CD DVD drive does not. Error code 10. Microsoft It planned is "fix.

CD DVD rom does not. Listed in Device Manager, with yellow warning sign, and when clicked, says Error Code 10. Running Vista Edition Home Premium

Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

http://support.Microsoft.com/kb/943104

Try the resolution on the following link:

The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vista

http://support.Microsoft.com/kb/929461

Also seethis discussion:

FixIt did not work the first time

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/unable-to-write-to-DVD-drive-Windows-Vista/791d88ac-73b2-48da-a18c-723c0b08a587

high definition audio does not work - error code 10

Current title: idt high definition autio does not work

My idt high definition autio does not work it gives me a code 10 how to fix

Hello

The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update device drivers.

Follow the given article below for more information.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104

I suggest you to perform the following methods.

Method 1:
You can uninstall the existing driver from Device Manager before installing the new.

1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. Locate the yellow exclamation mark under portable devices, right-click on it and select Properties.
3. go tab driver and click Uninstall to uninstall the driver associated with the device.

After uninstall is completed, restart your computer and check if the problem is resolved.

Method 2:
I suggest you update the audio drivers on the manufacturer's Web site see the link below:
Information about the hardware devices for Windows XP drivers
http://support.Microsoft.com/kb/319908
http://support.Microsoft.com/kb/283658

Method 3:
I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:
No sound in windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

See also the link below:

How to troubleshoot sound problems in Windows XP
http://support.Microsoft.com/kb/307918/PT-BR

I hope this information helps you!

Sony VGN-AR320E laptop webcam CC4 does not work. error code 10

Hi all

I have sony VGN-AR320E laptop. Just reinstal windows vista. Webcam does not work. gives me an error code 10. I tried to reinstal driver, looked online, could not fix. In Device Manager it says "this device cannot start. (Code 10) »

I appreciated all the help,

Hello

Error code 10 is issued when the operating system knows exactly what went wrong. The result of this error is a hardware failure. Sometimes, it might be due to viruses, to which you can scan your system and take off from these infections. But the most likely reason would be some registry errors. You can use the registry scanning software to run a test on the box and they can automatically correct the error.

More information for sony vgn-ar320e laptop 10 difficulty error code:

http://supportforsony.iyogi.com/VAIO-CW-series/error-code-8.html

Hope this helps you.

CD/DVD drive does not work error Code 19 a dI have tried all the solutions of correction that I can find.

Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

I tried Mr. Fixit, and I still keep getting the same message again and again... It was working fine, less then a month ago.

Hello

19 code means there is a driver conflict such as two devices attempt to use the same resources.

Please make all underneath the same if you've done it before as it's often the total of the process which
solves
the question.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Normally the above will solve this problem if not work your way down through them, even if you
done before.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

--------------------------------------------------------------------------------------

You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Windows 8 Upgrade, Toshiba Satellite C660 Matshita DVD does not work error code 19

I just upgraded my Toshiba Satellite laptop to windows 8 and having a problem with my Matshita DVD-RAM UJ890AS. In Device Manager, I got the error "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). Now, I tried to change the registry, but it shows no upper or lower to remove, I also uninstalled the driver and re-installed and I used the automated microsoft fix dvd all to nothing does not. Windows troubleshooting tool shows the problem but can not solve? Help me please!

HEALED!

All you have to do to avoid this error, code19 is to uninstall Toshiba Recovery Disk Creator and Toshiba Recovery Disk reminder. I thought that it had been uninstalled before that I've updated but I was wrong. I just uninstall both and hey presto it works :)

Webcam on the Satellite A200-175 does not work - error code 10

Hi all

I bought a Satellite A200-175 yesterday and I am trying to use the webcam, but it does not work. I searched the forum for possible solutions, but so far I have not found anything that solves my situation.
The laptop came with a preinstalled Vista OS, but the software of the webcam was not preinstalled. So I downloaded the latest Toshiba download page doftware and installed.
Subsequently, it still does not work and so I changed drivers for generic Microsoft (based on the advice of the forum).

I tried to reinstall drivers (several times), but that did not help. Device Manager keeps giving me the error code 10 (device cannot be started).

I'm a bit of idea, so any help would be appreciated!

Hello Franca

It's very strange because I installed the recovery image on notebooks P200 and U300 (both with the webcam) and I didn't notice any problem. After the first boot the cam will be recognized as new hardware and installed correctly.

Have you installed some Messenger like Yahoo or MSN and try to use it with one of them?

HP G72 laptop: HP G72 laptop does not start, error code of disk hard when you use HP Diagnostics

I have a laptop G72 and it will start, but Windows 7 does not start. On using diagnostic tools in the start menu, my hard drive and my departure fail their tests, with both giving me this error code:
```
UCUFWF-56C81D-XD003G-60WF03
```
No idea what this means? Help is appreciated.

Hello

You are welcome

Your computer is listed as coming with a 320 GB hard drive, but you can also easily install a 500 GB HARD drive if you want a little more space - the player on the following link is an example that would be perfect for your laptop.

Hard drive 500 GB

The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

If you do not have your recovery discs, see if you can order a replacement set using the link below.

Order HP recovery disks.

If you have a problem with this link, order them directly from HP.

If you live in the United States, contact HP here.

If you are in another part of the world, begin here.

Best regards

DP - K

Update (error code 80070103) Windows Update fails & Microsoft Security Essentials does not install (error code 0 x 80070643)

I keep trying to update and all these errors reappear. I can't install Microsoft Security Essentials and any update of Windows. I tried to do system Recoery by pressing F11 after reboot, and it does not work either. I'm guessing that something might be wrong with the registry or there is a virus but I am not a computer wiz. I don't have the Vista recovery disc and the original disk to restart. is it possible to fix this?

I paid to get it to format in November 2010... I installed a fake Windows Vista on it (32 bits but my PC on a 64-bit password) so I had to clean install it.

I don't understand: If you paid someone to format the HARD drive and do a clean Windows, when install I YOU "installed a 32-bit Vista?"

If your parent friend had lost the Windows CD comes with the brand new computer, the person you paid use to do the clean install of Vista 64-bit?

I do not see KB948465 in installed updates, only KB956250 & KB256506

I asked only KB948465. In any case, KB256506 is not an update or a section of the play.

No, I never had any other than Microsoft Security Essentials antivirus

Again, I don't understand. If you have never had any other antivirus MSE and MSE has been installed since November 2010, why you try to 'install Microsoft Security Essentials' now?

Q: which, if any, of these updates ARE LISTED in updates installed (no update history)?
A: See the number 3, I don't see anything else apart from those two

What "number 3"? You see nothing else, in addition to the two updates to date?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I give up. I can't help you if you do not answer my specific questions in your very next answers!

I think you'd better take the computer back to the repair shop & pay to figure what's wrong (yet). Good luck.

In & out...

Windows Installer does not properly error Code: 641

HAVE WINDOWS VISTA HOME PREMIUM WINDOWS SETUP DOES NOT CORRECTLY GIVES 641 ERROR WHEN AUTO UPDATE TRIES TO INSTALL IMPORTANT UPDATES. DON'T ME LETS NOT UNINSTALL A PROGRAM SAYS CAN'T ACCESS THE WINDOWS INSTALL.

You have installed system mechanic? This is what it seems possible that a recent analysis could have messed up windows installer, so causing problems similar to what you describe.

I followed the instructions in this thread:

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Installer-and-error-codes-641-80070641/24fd9f52-7faa-4f80-8f8e-8c7cd80dd481

Easy to follow, even for an old man like me.

Windows Firewall does not start: error code 0 x 80070437

I can not start the Windows Firewall on my system.

When you try to start the firewall I get error code: 0 x 80070437

During the execution of the services as administrator, the Base filtering engine is started.

Firewall Windows is not started, but when I start: error 1079: the account specified for this service is different from the account specified for other services running in the same process.
Authorization of firewall Windows Driver is not present.

How can I get my firewall?

Thank you

Hey Conor,

Follow these instructions to fix the Windows Firewall:

Download and install repair Windows:

http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html

When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:

-Reset the registry permissions

-Reset the permissions of files

-WMI repair

-Repair Windows Firewall

Then click Start. Once it is finished, restart your computer. Let me know if this helps you.

Brian

Mr. Fix it does not 0X803C0107 error code

Similar Questions

Maybe you are looking for