MS Pro 6100 and new DVD Writer DVR - K05 throws

If I change the DVD player of the SD - C2502 Thoshiba for Pioneer DVR - K05 the BIOS screen shows Error Message "IDE #1 error. I've changed because the Toshiba DVD is not able to read selfburned serveral DVD and CD-ROM. The Type DVD R or DVD R + is not the problem.
I have two of this Toshiba drives and both show the same phenomenon. Its incomplience with the standard DVD formats and base deformations firmware. Can someone help me to run the Pioneer DVD burner?

These topics may be useful:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5457&TSTART=25
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5300&TSTART=100

Tags: Toshiba

Similar Questions

  • Satellite Pro 6100 - what CD/DVD drive that I can use

    What DVD player is supported by the Satellite Pro 6100?
    I need to upgrade

    Thank you much for the help.

    Hello

    May I ask if you took a peek in the user manual?
    In most cases, information on compatible CD/DVD players are placed in the user's manual.

    Just for the note; You can also order a compatible CD/DVD player with ASP in your country!

    Check it out!

  • Problem with the Satellite Pro 2100 and new modules of RAM

    Hello

    I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
    My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
    Here is the code of the modules:
    KTT3614/256 (original)
    KVR266X64SC25/256
    256 MB pc2100 both.
    Starting the PC with any of them, as well as the modules are both compatible.

    Any ideas?
    (Sorry for my English but I'm Italian: D)

    Post edited by: DaK_TaLeS

    Hello

    the second location of memory perhaps is the problem.
    Try to start with a module in the second slot, first an empty slot.

    Good bye

  • Satellite Pro 6100 and restore plus CD

    Hey everybody

    first of all, thx for the reading of this and any imput or help given.
    My problem is that I can't seem to format and install a new operating system without restore plus CD, I is no longer the CD and cannot find my way around it.

    Is there a way to bypass the restoration more protocal?

    thx a lot :)

    I think you mean the Toshiba recovery disc. Is this good?

    Well, the recovery disk can be ordered from an authorized service if you need a new. On the Toshiba site, you can search the nearest.

    But you can also install the laptop with the drive of Microsoft. It would take a little more time because you need to download and install each driver for your laptop.

  • Satellite Pro 6100 and "Toshiba Power Saver.

    Hello!

    Is this OK to uninstall the saving of a SP6100 v5.04 as it doesn't seem to work properly or at all?

    I already check and change the BIOS v1.90 also accordingly power settings, but the machine still never power off of the hard drive and will go to standby sleep.

    The only things kind of work are the screensaver and power of the large screen, but very rarely according to the time where the settings...

    Best regards

    Pete v.

    Hello Pete

    I m wondering really the Power Saver doesn t work well on your laptop. This tool is one of the best tools designed Toshiba and it is very useful if you want to optimize laptop power consumption.

    I don't really know what the problem is here, but if you are not satisfied you can remove it from the system or simply use different power plan in power options properties.
    Maybe you should try to reinstall energy saver.

    Have you noticed another problem with your SP 6100?

  • Satellite Pro 6100 and XP SP2-Graphics

    Hi all
    I just installed a Windows XP SP 2 charges on my laptop, lengthen the BIOS and tried to install the new graphics card driver.
    But he know Jack doesn´t SP2 driver?
    And the default driver recognizes only 969 x 768 pixels?

    I tried the default Microsoft settings, all toshiba drivers and officials release-NVidia (which didn t find a graphics card :/))

    Can someone help me with this problem?

    Hi mate,

    Please try www.laptopvideo2go.com, which should be an optimal resource for your needs.

    See the FAQ section of the site mentioned before you download anything...

    Welcome them

  • Satellite Pro 2100 and new hard drive

    Hello

    I saw on another post that L0nestar has installed a Western Digital WD2500BEVE (250 GB, 5400 RPM) in a Pro 2100.
    The question I have is what the interface is SATA or EIDE? The original drive indicates it is a SATA interface, but the WD2500BEVE is an EIDE interface?

    Hope someone can clear this up for me.

    See you soon.

    AFAIK all older models of laptops have hard drives with interface EIDE. Satellite Pro 2100 comes with disk HARD Enhanced IDE (ATA-5).

    Good bye

  • Install the new hard drive on Satellite Pro 6100

    Hello

    I have the Satellite Pro 6100 and the hard drive has failed. Bought a new hard drive but have no idea where to begin to install it. Also, I have the product key for windows xp pro, but don't have a disc. Is there a way to get around get one, or someone has any ideas please?

    Thank you

    Michelle

    Hmmmm... It's very strange that you n t have idea how to start. Throughout history, there are only two options:
    -for the installation of an operating system you can use the original Toshiba Recovery disk that came with this laptop. If you n t have it then
    -use the Microsoft installation for the installation of the OS disc. All the drivers, tools and utilities must be installed Additionally one by one. Each of them you can find on Toshiba download page under http://eu.computers.toshiba-europe.com > support & downloads

    Please note: the product key at the bottom belongs to original recovery image so you probably won't be able to use it for the activation of the operating system.

  • Satellite Pro 6100-> DVD playback is OK, but can not read CD

    I have Toshiba Satellite pro 6100 and the reader of CD/DVD SD-C2502 on winxp sp2.
    The drive did not read any CD/DVD at the outset.
    After a DVD lens cleaner, it plays DVDs, but the Player cannot read any CD incl. music CD

    The error is 'windows cannot read the disk. The disc is damaged or... ".

    I "took off the CD/DVD drive and reconnected" and the pilot also seems to be OK.

    Any suggestions or ideas?

    Hello

    This sound like a player cannot calibrate properly and that's why the drive cannot read the CD disks.
    Especially the replacement drive is necessary and inevitable. :(

  • Satellite Pro 6100 - battery icon indicates 0% and courier mouse disappears

    Hi all

    I'm new to this so hope I'm posting in the right place.

    I have the laptop above Satellite Pro 6100 and am having some problems that I hope that you guys may be able to help me with.

    The first problem is that the battery is fully charged, but the icon on the screen says 0%.
    He fled feeding okay and if you disconnect battery lasts for all time and a half.
    If I try to defrag it does not have enough power?
    So I have to defrag in safe mode.

    The other problem is that the mouse disappears off the coast of the right side of my screen and it takes forever to find him!

    Would appreciate some advice or solutions like like the laptop and not really wanted to get a new one at the moment.

    Oh am running windows at home.
    Thanks in advance.

    Eve x

    Update the BIOS and set the default values.

    You could try reinstalling the common Modules for Toshiba and energy savings.

    If all else fails, there is the opportunity to back up your data and run recovery. If it happens again on a new installation of Windows, it may be a hardware problem.

  • Satellite Pro 6100 has no Wlan

    Installed xp on a Satellite Pro 6100 and it has no wireless network adapter in the Device Manager to all, and it does not appear in "Found new hardware" or whatever it is.
    I downloaded the drivers, but I can't put anywhere.

    Remember that the wireless card is an option on this laptop.
    This means that some Pro 6100 was delivered with the WLan card and some does not support the minPCI wireless network card!

    If the WLan card is not listed in the Manager of devices (or as unknown under network adapters device) then the laptop was not equipped of the WLan card and so you cannot use the WLan.

  • Satellite Pro 6100 USB problem after stand-by

    Hey all,.

    I have a Satellite Pro 6100 and when that I start my computer, my USB ports work fine. However, as soon as I wake, I get about 6 pop-up messages stating "USB device" unrecognized and my USB ports do not work.

    Device Manager indicates they work fine, so I'm just confused.

    Any help?

    Thank you!
    -Geoff

    Hi guys

    I'm not sure but I think the BIOS update can fix this. Have you already checked if there is a new update of the BIOS for your unit?

  • Wireless causes to the satellite Pro 6100

    Hi I have a pro 6100 and just recently, I replaced the card WiFi mini PCI card [PA3171U-1MPC] 802. 11 b with PA3236U-1MPC a / b combo. The site Web of Toshiba shows this combo Mini PCI card as being compatible with my model so compability shouldn't be a problem.

    At the same time, when my PC has been upgraded, I also added a Bluetooth PA3121U-3BTM module to my PC.

    Recently, I tried to connect via the wireless link and I could not do. I looked in my device manager and it has not shown that the new PCI Wireless card was recognized while previously it showed that Toshiba Mini PCI Wireless lan.

    I can see now is that--

    Area of personal network Bluetooth Toshiba
    Intel(r) Pro/100 VE Network Connection
    TRP Win Miniport
    GlobalSpan USB ADSL Lan Modem

    Bluetooth

    Bluetooth RFBUS from Toshiba
    Bluetooth RFHID from Toshiba
    Toshiba Bluetooth RFCOMM
    Bluetooth RFBNEP from Toshiba
    I was wondering now that I have Bluetooth maybe causing this conflict?
    Why is the Mini PCI card is not displayed in my device manager or go through what I wrote more high is this normal? The Mini PCI card has been attached by a computer technician and I have no doubt that it has been correctly mounted.
    Thank you

    I think I can solve my problem but I'm not entirely sure.

    I went to the Toshiba site we and downloaded the drivers for the PCI Atheros cards {driver WiFi Atheros 802.11a/b/g with support Cisco/WPA for Windows XP / 2000 (v2.4.2.14, 11/11/2003; 3.72 M)} and now in my list I see Atheros AR5001X Mini PCI Wireless Network Adapter
    I hope it is the right one?

    I can now access the login box for the wireless, which is a promising sign. I can't test it at the moment because I do not have a router at your fingertips right now.

    One last thing, when I press my button FN and F8 it does not bring the message that wireless is enabled. It is used for, but not now.
    Anyone know why this might be?

  • DVD writer no longer appears on the tree

    I have an inspiron 580 and the dvd writer is no longer recognized by the computer.  I bought a new internal drive (compatible) and it's not plug-and-play.  the two units whir and a shrill sound, so I know that they are getting power.  bought a new external drive (compatible), but he could not install.  ROAR more and either but not recognition by PC.

    any ideas?

    Hi Wynnkin,

    Please click the link below to try the old trick of upper and lower filter.

    I'll move your message on the forum disks for assistance.

  • Satellite Pro 6100 - battery acting very strange.

    As mentioned in the title, my laptop battery is very strange.

    The symptoms are:

    When the battery is flat after only 7-10 minutes he turns not, however if the battery is removed and placed in the laptop, the laptop will start as it has never happened.
    Not only that, but the bonus after the first can indefinitely until this that loaded into an OS and immediately after starting start the laptop stops due to an apparent lack of power, when there is power always, enough to do the same thing again. Also, the battery can still start even after being just in a freezer.

    This reacondioned back to normal battery or is this safe to use battery?
    Thanks in advance!

    Hello

    I guess that your battery is old like machines of this Satellite Pro 6100 and maybe it can't be charged more. In this case, your battery should be replaced.

    But even if the battery is faulty, you should be able to use the device connected to the power adapter.
    So even if the battery is removed, you could power the unit with the mains.

Maybe you are looking for