MSA2000 and VMWARE Vsphere

Similar Questions

• HOL-INF-04 - display performance and VMware vSphere 5.1 - Lab has expired

  Hello

  I started 'HOL-INF-04 - display performance and VMware vSphere 5.1' lab and before I could make the workshop, it has expired.

  Now I can not re - start. What should I do now?  Help, please...

  Concerning

  Nishant

  Nishant,

  It's a little gremlin that snuck into the code, guys it fixed today. It was that if lab has not started and user not leave lab cleanup script would enter in...

  Test, it should work...

  Lets us know.

  Pablo

• different between "VMware vSphere: install, configure, manage [V4]" and "VMware vSphere: Fast Track [V4]" "

  can someone help me understand different between "VMware vSphere: install, configure, and manage "and"VMware vSphere: Fast Track ", first becuse is about $3,000 and another is about $5000. "

  Thank you

  can someone give me some information about the rules of absente, homework and laboratories, in these classes online.

  You must participate in daily.

  You need a good Internet connection and a fixed phone or a headeset.

  Online courses are generally in central time... but in some cases may be different.

  also should I take a test on these classes?

  NO.

  just be present on these days of class?

  Yes

  I mean those class just for learning or at the end of these classes, I have to pass an additional examination for them?

  The VCP410 exam to be held in a centre VIEW (www.vue.com)... for the use of recording the same e-mail that your use of the course.

  André

• 5 of VSphere and VMware vSphere Essentials Licensing

  I just the unit of vCenter installed and put my license keys in for VMware vSphere Essentials Bundle - (version 5.0) - license - 3 guests - up to 2 processors by host

  However, when I connect via vSphere client of web it says I have a key that expires in 60 days (the assessment key). I can't delete this key. I'll find myself unable to manage my VM with vSphere Web Client in 60 days?

  Man, this approval is confusing!

  

  Thank you!

  Post edited by: a.p. - in gray license keys!

  Looks like that you always use your evaluation key for your instance of vCenter instead of your purchased key.  If you click on the tab of systems vCenter server you should be able to pass the eval on a key your purchased key.  That should solve your problem.

• Question about VCB and VMWare vSphere 4 Essentials

  Hello

  We have 2 virtual servers: one with ESXi35 (that has VMWare infrastructure Client 2.5) and the other with ESXi4 (which a vSphere Client 4). There is an offer to purchase of VMWare vSphere 4 Essentials to half the regular price and I wanted to know if this product allows me to backup (and possibly restore) virtual machines using VCB scripts.

  Thank you very much

  Concerning

  Carlos Negroni

  From this link, http://store.vmware.com/store/vmware/en_US/DisplayProductDetailsPage/productID.126843700 , it includes VCB so the answer to your question is Yes.  I remember got an e-mail that VCB is now end of life so that it is no longer that probably not available in the next version of ESX.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• 4 ESXi and VMware vSphere CLI

  Hello

  I can't start a discussion in the community CLI to I write here.

  When I try to use the CLI tools to manage a few shots on an ESXi 4 Server I get strange errors.

  CMD: snapshotmanager.pl - Server XXX.XXX.XXX. XXX - XXXXXX - nom_snapshot Test vmname - create operation

  Result:

  Fault:

  SOAP fault:

  -

  ---

  Error string: error. RestrictedVersion.summary

  Lack of details: RestrictedVersionFault

  The operation using 'list' works very well but not create or delete.

  No idea why it does not work for a 4.0 host but is ideal for a 3.5?

  The reason why it worked for you on ESXi 3.5 is probably the version you were using was U2 or U3 where the VI API has an internal bug that allowed two full read/write access, which allows you to perform operations such as switching to a virtual computer or take a snapshot. Go ESXi 3.5u4 +, which includes 4.0 moving forward, the API VI is read-only. Before more details please look here: http://vmetc.com/2009/03/31/esxi-u4-ends-free-version-read-and-write-access-from-the-rcli/

  You still have a few options, either unlock the console SSH not supported to automate snapshots using vimsh vim - cmd wrapper, using the VI Client or use VMware VIX and vmrun which currently is not governed by the VI API, take a look here for more information: is not happy with lockdown 3.5u4 VI API/RCLI ESXi? Worry not, VMware VIX to the rescue... for now =)

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Versions of VMware vSphere

  What is the difference between "VMware vSphere Essentials Kit" and "VMware vSphere Standard" in terms of features?

  www.VMware.com/Products/vSphere/Pricing.html

  I'm looking for professional use in VMware.

  Thank you

  P2V is possible NFB free esxi edition, no problem. You can also manage via vsphere client where you'll have GUI and you create VMS with vsphere client that connects to the ESXi host.

  But it cannot be managed by vcenter to get the functionality as HA, DRS, vMotion, models etc.

  As you have mentioned that you have pretty much a box with VM sound your decision to go with free or licensed.

  If you go with free version of ESXi, you can have only 32 GB vRAM right. This means that if your physical machine have more than 32 GB of RAM can also create virtual machine with no more than 32 GB of RAM.

  If you decide to go for licenses of its better to choose more essential rather than vsphere standard edition.

  As essential or essential more is a group package which also come with 192 GB of vRAM, with a maximum power of 3 home with 2 processor and a vcenter license. Cost is lower than vsphere standard edition.

  http://www.VMware.com/products/vSphere/pricing.html

  Price please point by clicking on the bottom of the tab for useful and correct answer

• VMware Vsphere HA (problem of storage in common) and problem of band network bandwidth

  Hi all

  I am setting up VMware VSphere HA on ESXI 6.0

  I have 5 hosts running, each host has 2 management networks main network 1 vMotion and 1 network card for balancing with the management network. (each NIC 1Gbit uplink)

  I also attached to each card a FC (Fiber Channel) connected to HP 3PAR storage.

  each host have 1 TB or 2 TB Fiber Channel-attached storage.

  When I was setting up the AP he stated that he did not have any shared how storage can I allow other hosts to see each store data as a shared storage. NB: when I go vsphere client to web I see all the storage of each host.

  I also want to allow FT on a virtual machine, I have also a problem of bandwidth insuffisent or something. .

  also, I enabled fault tolerance on each NIC attached to the host.

  also another question: should I export volumes (LUNS) to all hosts in the AP? (in fact I exported each volume to each host separately) for example:

  Volume 1: HP3PAR_ESX1 exported to HOST ESX1

  Volume 2: HP3PAR_ESX2 exported to the ESX2 HOST

  Volume 3: HP3PAR_ESX3 exported to ESX3 HOST

  .. .etc

  can you me clear on this issue or guide me to where I can solve these problems please.

  When I try to activate the FT on the VM I the following warning attached

  This message was edited by: coolirc attached image FT problem

  There are memory FT requirements compatible VM is through two virtual, primary and secondary computers. so it will consume the same amount of resources of both ESXi hosts.

  VM with 10 GB of RAM allocation, turn on FT booking VM is now 10 GB RAM, so 10 GB + VMkernel consumption General host running primary VM and same amount of the host that is running with secondary VM. on top of this admission control in support of the failures of host we are going to tolerate so say primary VM host fails, then secondary VM becomes the new primary and triggers a new high school to be created and powered in one of the other host survivor in your HA cluster but which will be successful only when you have sufficient resources available to satisfy a reservation.

  your source host has 16 GB of RAM and one of the destination host also got 16 GB of RAM, so if you try to activate pi after disabling admission control on your cluster policy, I think that it should allow you to activate FT without errors. [if it still does not work so if possible, turn off all other virtual machines for free resources or to try to reduce their reservation manually if they are running with a reservation and try again.]

  with admission control, the necessary resources would be even higher.

  screenshot of Cluster summary reports that you have 4 guests in it and the memory resources available about 30 GB to 60 GB total memory. But isn't always the right figure, if you go to the monitor-> book resources, is where you will find actual "ready reserve", it's the right amount of reserve memory that you will be able to use across several virtual machines, you run in your cluster.

  I tried 2 vCPU vm FT in vSphere 6, works very well, but never tried with Hardware version 8, in your case, your virtual machine is hardware version 8, although I'm not sure if it is mandatory to have the hardware version 11 VM for FT so ideally it should work, but virtual hardware version if possible vm upgraded to 11.

• VMware vSphere: optimize and [5.5] course is worth doing or not advice to scale

  Hi all

  Need some advice, as I am preparing to take the exam of the VCAP-DCA 5.5 in April.

  Will makes VMware vSphere: optimize and adapt training aid [5.5] or would be using the DCA official study guide book suffice?

  Just take peoples opinons, before I decide to spend money on the course.

  Thank you all very much.

  JIT

  Personally, I think that if you have below you don't take it out not before, then follow the course (unless you miss the VCP and the requirement of course)

  1 watch the video of Pluralsight VCP and VCAP

  2 buy the VCAP-DCA-5 study study guide bonus ebook on the VMware press - practical site reviews includes in the book

  3. go on the official and unofficial study guide CLI guide study

  4. do you have a host laboratory and practice and practice and make sure you only go on all the (MOST important) action plan.

  Enjoy autolab

  5. If you really need to take the course... you can do the lab connect version of the course which is $ 300 to $ 500.

  If the course if the company paid for the course, and he is not from your Pocket then of course the course.  But your hard-earned income is better spend in

  buy yourself gear lab, subscription VMUG and VMware books.

• VMware vSphere profile focused on service of storage AND VMware vCenter Storage Monitoring Service alerts

  Hi all

  I installed VC 5.5.0b in-bound on a Windows Server 2008 mode. The Installation goes very well and everything looks good, but when I check the service of vCenter status it shows that both services have an alert

  The Services are

  

  I checked the log file vws.log and found the below error message

  [ ERROR com.vmware.vim.health.impl.ComponentSpec] Impossible to recover health for com.vmware.vim.sms of http://localhost/sms/health.xml

  ERROR com.vmware.vim.health.impl.ComponentSpec] failed to retrieve com.vmware.vim.sms from any of its URL of health health

  [ ERROR com.vmware.vim.health.impl.XmlUtil] Error recover health of url: http://localhost/sps/health.xml

  java.io.FileNotFoundException: http://localhost/SPS/health.XML

  at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown_Source)

  I tried steps below

  • I'm not using a port number personalized according to the http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2007834
  • I stopped the WebClient Service > > restarted VC Service but not go
  • The Windows Firewall is disabled

  My virtual database uses a custom instead of 1433 port.

  Please suggest what I can try next

  Thanks in advance

  This service is supposed to be there, anyway you can try to repair the installation. This article talks about re - install VMware vSphere profile Driven Storage service: upgrading to vCenter Server 5.0 Update 1, 5.1, or 5.5 fails and the Setup Wizard is interrupted (2017147)

• VMware vSphere: install, configure, manage [V5.1] correct review and practice test

  Dear all,

  Here, I'm a bit confused so I need help to clarify which exam I have to take and what is the matter with this review. I took the course VMware vSphere: install, configure, manage [V5.1] and when I tried to register for the exam, he gave me the review "VCPD510: VMware Certified Professional-Desktop ' and when I tried to find some documents to study, I found two different materials, which relates to the VCP5-DT, which is all about VMware View: install, configure, manage [V5.x] and the other which is VCP - 510. While we should I study.

  Help, please.

  Hi mariusme,

  The review, you have to take is VCP5-VTC. VCPD510 is for desktop, which is entirely different. Please go to the vmware certification page and select VCP5-DCV(vmware certified professional in datacenter virtualization) and you will find the action plan. You can follow it, and since you've followed the required courses, you will be eligible to take the certification. And also sign up for VTC - VCP on Vmware Portal before you book review on PearsonVUE.

• Fedora 17 office is different under VMware vSphere 4.1 and Workstation 8.0.3

  Fedora 17 office is different under VMware vSphere 4.1 and Workstation 8.0.3

  http://Forum.ICST.org.tw/phpBB/viewtopic.php?f=16 & t = 26288 & sid = 523862dca09b4cf69f52bf9dfdd76086

  Hello

  I'm sorry but I don't understand the position, but if I'm right you wonder why the office are different.

  It is simply because the desktop 8.0.3 Fedora 17 can start the new interface of Gnome 3, on vSphere 4.1, it can be started and Fedora will then be restored in "compatibility mode".

  HTH

  Giuseppe

• Can we start VMware vSphere Client with uid and pwd together?

  It is possible to pass the UserID and pwd in VMware vSphere client application using program options?

  The program did not show anything re. Start arguments or settings for the program

  I think it's a little embarrassing that I always need to manually enter credentials and would define me a shortcut that contains the credentials.

  Something like "C:\Program Files (x 86) \VMware\Infrastructure\Virtual Infrastructure Client\Launcher\VpxClient.exe - uid < UID > - < PWD > pwd..."

  Is this possible? Or via a config file?

  M.

  Please take a look at for example http://www.johnoriordan.ie/index.php/2011/02/21/vsphere-client-command-line-options/ for the way in which this can be done.

  André

• VMware vSphere 4 licenses essential question and the number of processors

  Hi all

  I have a question about the Essentials of VMware vSphere 4.1 license. We have a client interested in a VMware vSphere Essentials license. The machine runs on 2 x processor Xeon 5675 6 c. Now I read somewhere that there was a limitation of the number of processors that can be used with the edition of Essentials. If I remember correctly, the number of physical sockets is limited to 2, but I remember that there is another limit, but I could not find the document describing and wonder:

  Is there a limitation on the maximum number of 4 cores on one physical processor that can or will be used by VMware vSphere 4.1 Essentials or there is a limitation on the number of 4 vCPU that can be assigned to a guest?

  I would like to know because if this is a limitation on the number of vCPU that can be assigned to a customer that would not be a problem because we have no guests in need of vCPU, then 2 more, but if this is a limitation on the number of cores that would be used by VMware vSphere Essentials, it would be a waste of money to buy a 6-Core ;-)

  Hello.

  2 taken with 3 guests, 6 hearts and SMP 4 lanes for virtual machines.

  These limitations are available at: http://www.vmware.com/products/vsphere/buy/small_business_editions_comparison.html

  Good luck!

• VMware vsphere essentials more and Dell MD3000i iSCSI - virtual disk not on preferred path

  Hello world

  I am trying to set up our new vmware vsphere essentials plus the facility. We have 2 x Dell R710 servers running vmware esx4 and have a md3000i SAN.

  Each server has a network cable to connect to a network SAN controller.

  vmserver1 a vmnic6 IP 192.168.130.110 the IP controller connection 0 192.168.130.101

  vmserver1 has IP 192.168.130.111 vmnic4 connection to controller 1 IP 192.168.130.102

  vmserver2 a vmnic 6 IP 192.168.131.110 the IP controller connection 0 192.168.131.101

  vmserver2 has IP 192.168.131.111 vmnic4 connection to controller 1 IP 192.168.131.102

  Whenever I start a virtual server it causes the dell md3000i start flashes orange, and management tool says disc not on favorite virtual path.

  After entering the tool configuration and affecting the path preferred, from the commencement to vmware, even with a single connected server it causes the error.

  I tried to configure vmware to use direct fixed and alternate paths.

  I did a quick search on Google and found these sites:

  http://www.delltechcenter.com/page/VMware ESX4.0andPowerVault MD3000i

  http://en.community.Dell.com/support-forums/storage/f/1216/t/19269507.aspx

  Strange configuration.

  Looks like you are using some cross cable?

  Each host must have 2 vSwitches, each with a port vmkernel on one of the two iSCSI network.

  Each host must reach all 4 of the MD3000i (test with the vmkping command) interface.

  See also:

  http://www.delltechcenter.com/page/VMware ESX4.0andPowerVault MD3000i

  André