MsgBox appears not
I was writing and script and tried to add a msgbox to ensure that my script was working properly so far. When adding that nothing appeared. then I wrote a simple... nothing any ideas? y at - it some sort of setting I need to change. I'm pretty new to diadem.
my simple script (as simple as they come):
Sub Hello)
MsgBox ("Hello")
EndSub
and I have nothing... Is there something wrong with my syntax? any help would be great. Thank you
Hello!
Silly question: you call the sub somewhere?
Matthias
Tags: NI Software
Similar Questions
-
the Airport extreme appears not on the graphic overview
the Airport extreme appears not on the graphic overview
Everything plugged and works
Unable to connect with the personal network
By graphical overview, I presume you are talking about airport utility?
Are you using wireless or ethernet?
You have run diagnostic wireless on your Mac if you use wireless?
Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support
-
same email is sent continuously all by appearing not not in the sent box
using my iPhone 6, same email is sent continuously all by appearing not not in the sent box. for two days
Hi FKDK,
Thank you for reaching out to the communities of Apple Support.
I know it's important to keep you email works as expected. If you have not already the case, try to restart your device by pressing and holding down the button on/standby and then dragging down to the power.
Restart your iPhone, iPad or iPod touch
Once your phone restarts try to return or to re - write the e-mail and send again. If the problem persists after that, let us know if the e-mail has all attachments, or if the problem occurs with all of your emails.
Once again thanks for joining the best wishes.
-
Since the update of my iMac and my iPhone, my IBooks (175) only appear not on itunes or available to install on devices.
Hi rbarj,
iBooks are now managed by the iBooks on your Mac and iPhone applications. The link below more deals in this article concerns iBooks applications and iBooks transfer.
On iBooks
https://support.Apple.com/en-us/HT201478All my best.
-
my list of contacts on my windows phone appears not all contacts
my list of contacts on my windows phone appears not all contacts, but on my computer, I do not understand, they did, but I reinstalled it on my phone, like updating the contacts from my computer, because they had not updated on my phone! so I thought that I would like to reinstall, but now showing no, please help x
He had some problems with contact sync which should now be resolved.
-
It began to appear in the first inch of each merchant site I visit with the new version, "Congratulations!" Every $5 spent at JCPenney saves you a chance to win a $500 gift card. I have run scans and nothing appears not infected, but I don't get that annoying block in Internet Explorer. I uninstalled and reinstalled firefox and when I did, the first thing is present at his inauguration was a message that says: "you have joined the shop now...". "something or another and I had to click OK, it was a microsoft OK message. How can I get rid of this?
URL of affected sites
http://www.BestBuy.com, target.com, any site of retail trade
Your problem can be caused by Malware. You can run and update according to free anti-virus software:
1. Malwarebytes (free version) - http://www.malwarebytes.org
2. Spybot Search & Destroy - http://www.safer-networking.org
3. Spyware Terminator - http://www.spywareterminator.com
In addition, there are a number of forums, you can use to help get rid you of your infection. It is:
-
Example: officejet j4580: why my printer say my appears not connected to my computer
Why my printer say my appears not connected to my computer
Hello @momodeda!
Thanks for posting on the HP Forums!
I don't know why the computer does not show the printer offline, but I would be happy to provide help to try and get communicating them again!
The first thing I would suggest is to power cycle all the devices. Remove the power to the printer, shut down the computer and remove the power to the router. Wait 20 seconds, then reconnect the router. Wait for the lights on the router to return.
Plug the printer in and turn on the computer. Once all devices are back on, try printing again.
If this does not work then I would recommend uninstalling the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.
To uninstall the HP software, click here: uninstall the HP software
To perform a disk cleanup, click here: perform a disk cleanup
To download the HP software, click here: HP Officejet full feature and driver softwareIf please, after back and let me know how it goes!
-
telstra icon appears not central in the menu of the Office start icon
the shell of telstra appears not central in the menu of the start desktop icon.
Hello
I suggest you to follow these steps and fi, it is useful to check:
Method 1:
Try to update the latest drivers for the graphics card and check if it helps:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyMethod 2:
Try creating a new user account and check if it helps:
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountIt will be useful.
-
Projects 2.0 Webworks appearing not
Hello
I am new to app development, so I don't know that it's just doing something simple, I have to break the link between the projects that I've created and Webworks.
If I start webworks, connect my phone and transfer the app 'Helo World' original, everything works fine. If I then try to implement the code in github samples, everything begins to fall apart. When I restart webworks my project appears not so I have tried the following:
(1) create a new project
(2) rename all files in the files of www, js and css to *.old
(3) copy all my files from my other project back to these files
(4) start webworks 2.0. Nothing shows
(5) delete all my files from another project and rename originals (remove the .old extension)
(6) start webworks 2.0. Yet once, nothing shows
I'm somehow break the link between my projects and webworks even if I keep the original files. What excatly is webworks looking for and where is it?
All I wanted to do is get a blank page / screen with a few buttons and an action bar. Copied from actionBar.htm and actionBar.js in my project and published sections of script index.html to match what he tells me on github. Also changed the config.xml file, although I'll be honest, not sure that any of these files should look like.
Background: I don't know html5, javascript or css. Learning that I will.
Thank you
Tim
OK... think about it. It seems that there are some images that have been referenced and not really there. App gets to the phone now, but I'll accept this as an answer and start a new post on the new errors I get.
Thanks for all the help
Tim
-
Custom image drop-down list appears not appropriate on Blackberry 9000 Simulator
Hello
I created the custom in my code drop-down list. my code works fine for other simulators.
But when I tried to run on Blackberry 9000 Simulator from the drop-down list not shown correct image he cuts half the size of the image.
I check my code, I did not manually height for the drop-down list.
Please tell me why image appears not appropriate Simulator 9000.
Welcome to the forums.
I'm guessing that you don't know how to use the insert of Code button. If you look at the top of the editing window, you will see a number of options for formatting such as police. Look to the right and there are two buttons, one is used to insert the code. Hover over the buttons and you will see a description. Press the button insert the Code, add your code and you will see something like the following:
public void drawListRow(ListField list, Graphics g, int index, int y, int w) { Bitmap bitmap = Bitmap.getBitmapResource(arrowBitmapName); int fontWidth = getFont().getAdvance(text); int width = Display.getWidth() ; int height = list.getRowHeight(); g.setColor(Color.BLACK); g.setFont(fontPlain); g.drawBitmap(0,0, bitmap.getWidth(), bitmap.getHeight(), bitmap, 0, 0); g.drawText(text, 3, y-drptextHeight, 0, w); }
I think it's the routine that you use to draw each line of your drop...
I recommend that move you as much code as you can out of this method. It's called very often. Creating a Butmap here, which is an expensive operation, is not a good idea, especially when the Bitmap image in reality does not change. So create once and use it in the drawListRow.
Also use the parameters that are passed. The width you have to paint is given in the parameter, and perhaps not the same as the actual display width.
In any case, this code draws the Bitmap to (0, 0). I susspect should be at (0, y). This could explain why it is not drawn correctly. You seem to have a similar problem with the text.
The drawListRow is assigned a value of 'y' and should paint from y to y + listField.getRowHeight (). But in fact drawListRow has access to the area of the entire painting, so can do too much else. You must code your method correctly to get good results in your list.
Hope this helps, if not, please post your code so we can actually read. In fact, as I say to others, do not post your real code. Create a simple example that we can run illustrating your problem. Then everything can run your example and see the problem. Never stick all your code. People are put off by the number of lines of code.
-
I don't have a default on installation of creative cloud but it appears not all options, and I can't access my programs. Is this a problem of blocking information? I can send a screenshot to illustrate.
Hello
Please refer to the threads below where this issue has been addressed:
Creative cloud is empty window why?
New application Cloud Creative unusable: it is empty!
Re: Empty opening creative cloud app
Kind regards
Sheena
-
vCO 5.5 default plugins appearing not
just installed for the first time and the Library 5.5 default vcentre and webviews are missing.
Indeed, after clean install present only workflows are documentation those
I tried to disable the reactive webview and library restart and still missing
delete files in the folder plugins and still missing added re dar,
It's hosted on windows 2012
Check the credentials in the plugins tab on the version of plug-ins on the tab troubleshooting reset and restart the service.
17 November 2013 at 09:05, "mcfadyenj' [email protected]<>[email protected]> wrote:
Https://communities.vmware.com/index.jspaVMware communities >
vCO 5.5 default plugins appearing not
created by mcfadyenjhttps://communities.vmware.com/people/mcfadyenj> in Orchestrator - see the discussion completehttps://communities.vmware.com/message/2313392#2313392>
-
Virtual copies don't appear not
So, go along and make some changes by creating virtual copies and now new copies I do are not displayed. He stopped this and now he's doing it again. I've accidentally made six virtual copies, can it stack them, but would not be desempilement when I right-click. With this picture, I created a virtual copy, but in the grid it appears not at all:
But make other virtual copies of the other day:
I have no idea why this happened. How to make all my photos, including all virtual copies is displayed in the grid? Unstacking is not an option:
I'm so confused. Thank you.
You are in a collection when you create the virtual copy?
You have enabled filters?
-
enabled automatic optimizer stats collection, but is not running and not appearing not
enabled automatic optimizer stats collection, but is not running and not appearing not
I've activated automatic optimizer stats collection days ago, but it never worked. DB version is 11 GR 2, OS redhat 5. It shows active in dba_autotask_client, but not in autotask_task. Please help on this issue.
SQL > select client_name, State of dba_autotask_client;
CLIENT_NAME STATUS
--------
ACTIVE automatic optimizer stats collection
advise OFF auto space
SQL tuning advisor ENABLED
SQL > select TaskName, status, to_char (last_good_date, ' ' YYYY-MM-DD HH24:MI:SS) last_good_date, last_good_duration
of dba_autotask_task
where client_name = "auto optimizer stats collection"; 2 3
no selected line
SQL > select program_action, number_of_arguments, active
of dba_scheduler_programs
where owner = 'SYS '.
and program_name = 'GATHER_STATS_PROG '; 2 3 4
PROGRAM_ACTION NUMBER_OF_ARGUMENTS ENABL
DBMS_STATS.gather_database_stats_job_proc 0 TRUE
SQL > select w.window_name, c.autotask_status, c.optimizer_stats, w.repeat_interval, w.enabled
-, w.duration, w.last_start_date, w.next_start_date
dba_autotask_window_clients 2 c, dba_scheduler_windows w
3 where 4 c.window_name = w.window_name
5 order by last_start_date desc;
WINDOW_NAME AUTOTASK OPTIMIZE ITS REPEAT_INTERVAL
MONDAY_WINDOW ON ON freq = all days; byday = MY. byhour = 22; byminute = 0; BYSECOND = 0 TRUE
SUNDAY_WINDOW ON ON freq = all days; byday = Sun; byhour = 6; byminute = 0; BYSECOND = 0 TRUE
SATURDAY_WINDOW ON ON freq = all days; byday = SAT; byhour = 6; byminute = 0; BYSECOND = 0 TRUE
FRIDAY_WINDOW ON ON freq = all days; byday = FRI; byhour = 22; byminute = 0; BYSECOND = 0 TRUE
THURSDAY_WINDOW ON ON freq = all days; byday = THU; byhour = 22; byminute = 0; BYSECOND = 0 TRUE
WEDNESDAY_WINDOW ON ON freq = all days; byday = SEA; byhour = 22; byminute = 0; BYSECOND = 0 TRUE
TUESDAY_WINDOW ON ON freq = all days; byday = KILL; byhour = 22; byminute = 0; BYSECOND = 0 TRUE
7 selected lines.
SQL >Select max (last_analyzed) from all_tables;
display SQL results above
-
Apple mail appears not multi-party digests
Upgrade to Mac OS Sierra and now Apple Mail does not appear the contents of multi-party digestions. Has anyone else seen this and how to fix it?
Hello Frederick-b,
Thanks for this info and choosing the communities Support from Apple. I know how important being able to see the content of several parties digestions in Mail is for you. Based on what you said, it seems that you may want to change the settings of the conversations on the view menu, activation of the conversations or disabling, or expand or collapse the conversation in the list of messages.
Discover conversations - help Mail
See you soon!
Maybe you are looking for
-
How can I delete data from a second hand phone?
My son gave me his old iPhone and I added my sim card but I see its contacts and data, how to go on the withdrawal of its data and addition of mine?
-
should I get the 32 gig and increase storage icloud or get the 128 gig?
Should I get the 32 gig and increase storage icloud or get the 128 gig?
-
Want to 700-074: update BIOS GUI is in Chinese!
HP Support Assistant today announced that an update was available for the BIOS in my URGE to 700-074. However, when the update tries to install, the user interface appear in Chinese, I can't read. English please! Does anyone else have this problem?
-
different type of terminals of elapsed time of the DAQ assistant
I connected a digital relay to one of the outputs. I have installation wizard DAQ to operate a valve with the relay. Now, I want to control the valve to drive all... .lets say 20 seconds, until I stop the program. What I need, is to change the State
-
Hello - all have a HP Envy 4500, using Central eprint, sched apps print OK, but confused about how to run the applications on demand. For example, the HP Quick forms. I can program, I can look at samples, but how does a print on a sheet desired such