MSOE.dll initialize

Similar Questions

• Windows Vista window does not start error 0 x 80004005 and is unable to initialize msoe.dll

  Mail window stop working last week.  At startup, I got error 0 x 80004005 then failed to initialize msoe.dll.  This can be corrected?

  Hello

  You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps mentioned below:

  Method 1:

  You can reconfigure Windows mail and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account

  Method 2:

  If the previous step fails run the System File Checker tool to troubleshoot missing or corrupted system files.  Follow the steps in the link:

  http://support.Microsoft.com/kb/929833

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  For your reference, take a look at the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• LabVIEW 8.6.1: nilvaiu.dll failed DLL initialization routine

  I have just upgraded to LV 8.6.1 on Windows Vista, and all my routines DAQmx won't load with the message:

  Error loading "nilvaiu.dll.

  A dynamic link library (DLL) initialization routine failed.

  According to some old posts, I tried to add write permissions to all of the files from C:\Program NIUninstaller Instruments, but that did not help.

  I also uninstalled DAQmx - LV 8.6 support and reinstalled but that has no effect.

  I also tried to run 'regsvr32' on the DLL, but failed with a similar message.

  Everyone knows this?

  Is there a solution?

  Jason

  I encountered the same error of nilvaiu.dll after you have reinstalled the drivers LV2009SP1 and NI of DVD 2010 - DS1. While working through the error with me, Ben, AND found support this resource: ' software failure OR when PAE (physical address Extension) is enabled on the Windows operating systems '. (Document ID 54D9I6M6). This turns out be the problem of the root of both my 'nidevmon.exe' failure on boot failure and "nilvaiu.dll" on DAQmx support: recent DAQ libraries are incompatible with the enabled physical address extension.

  I am running Windows Server 2003 with 4 GB of RAM. PAE is enabled by default with Server 2003. (Look at system-> general to see if the EAP are enabled: it is just below the RAM.) As Microsoft recommends that EAP not be disabled because it ensures the safety of execution, I followed the second of the two suggested methods.

  I've edited the boot.ini file (System-> properties-> Advanced-> startup and Recovery-> Edit), added/maxmem = 4096 for the start command and restarted. Nidevmon.exe both nilvaiu.dll errors have been corrected with this change.

  System-> general reports now 3.25 GB of RAM (vs 4.00 before) so I lost a little more memory than expected. I can watch using the /burnmemory switch, that Microsoft recommends more/maxmem because maxmem "does not take into account memory hole". I'm trying /burnmemory = 16 now.

  -Rob

• googlegroup mail receives an error "msoe.dll could not be initialized.

  I created a Google Group, invited members, received their responses and published the list of members.  When I tried to send an e-mail to the group, I got a message that msoe.dll could not be initialized.  How to solve this?

  I created a Google Group, invited members, received their responses and published the list of members.  When I tried to send an e-mail to the group, I got a message that msoe.dll could not be initialized.  How to solve this?

  Sorry, but the info was so 'goop gobbly' for me.  Y at - it somewhere that I can download the msoe.dll?

  While you might be able to, two points...

  (1) not a safe idea.  Microsoft does not offer it more (they do not support OE6) and nowhere else - you take your chances.

  (2) most important - the file is not likely your problem.  Something else is probably causing this message.

  You may need to remove (I suggest renaming it to RECORDS. OLD personally) RECORDS. DBX file.  If Folders.dbx is damaged, OE often stops displaying the files to the existing *.dbx files, and sometimes OE will simply refuse to start. Also a bloated Folders.dbx can OE run very slowly. These two problems can be repaired by closing OE and deleting Folders.dbx. Understand although you will lose the mail directory structure, all the discussion lists and all synchronization options and this message rules will probably have to be edited

  There is another option where you could not lose the folder structure (will not be rebuilt) because you are going to import it from a BACKUP of everything what you do by renaming the whole store folder before you rebuild everything in OE - but I thought it would be more simple.

  C:\Documents and Settings\[your username]\Application Data\Identities\{...} \Microsoft\Outlook express

  (The usual location for the file.)

• bcmwltry.exe with / DLL initialization failed in windows xp

  I write a question on behalf of the client. Here's the problem of the customer:

  Playing Cityville Facebook my laptop crashes every time with the following problem, bcmwltry.exe with / DLL initialization failed. I don't know what it is or how to fix it?

  Hello
   
  ·         How long have you been faced with this problem?
  ·         Did you do changes on the computer before the show?
  ·         The problem happens only when playing Cityville Facebook?
   
  bcmwltry.exe is located in the C:\Windows\System32 folder, but is not a Microsoft System file. It's a Broadcom Corporation Wireless Network Tray Applet.
   
  Go to the Task Manager and stop the process, or it will consume memory and can cause your computer down.
  To complete the process in the Task Manager, follow these steps:
   
  a. press the keys Ctrl + Alt + Delete , and then select the Task Manager
  b. end of the process(bcmwltry.exe) running in the background
   
  You can also consult with Broadcom for additional help.
   
  Hope this information helps.

• error 1114 dynamic link library (DLL) initialization of the routine failed.

  I can't connect to internet

  Windows could not start the Service diagnostic on the local computer policy.  error 1114 dynamic link library (DLL) initialization of the routine failed.

  What is the solution to this problem everyone?

  Hello
  1 did you change on your computer before this problem?
  2. When you receive this error message?
  3. are you using Internet Explorer? If Yes, what version of IE are you running?
  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

   
  Follow the suggestions and check if that helps.
  Method 1
  (a) click Start .
  (b) in the search box type services.msc
  (c) right click on Diagnostic Policy service and go to the Properties.
  (d) select Auto under Startup type.
  (e) click Start .
  (f) click on apply and OK.
  (g)restart your computer.
   
  Method 2
  You can run the System File Checker.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 3
  You can perform the clean boot to see if a service is causing this issue.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual
  See also:
  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

• error of msoe.dll in internet explorer 8

  I'm having a problem opening to the top of my e-mail with internet explore. I use Vista 64, Internet Explorer 8 and Windows Mail with a linked gmail account. When I click on which in the past has been an e-mail link, I get the following message:

  Windows Mail could not be started because msoe.dll could not be loaded.

  I checked the Windows Mail folder in my program files, as well as mose.dll exists. Just for some reason IE is not recognize it. Do you know how I can fix this problem?

  Thanks in advance.

  Have you tried re-registering the DLL?  Have you tried a different Windows user account to ensure that it is not a problem with the existing Windows user profile?  Did you uninstall your antivirus programs and reinstalled without the mail feature to ensure that what is not interfere analysis?

  Brian Tillman [MVP-Outlook]

• "A dynamic link library (DLL) initialization routine failed." NVIDIA drivers

  So I recently wanted to install new NVIDIA drivers on my computer.  The installer downloaded completely and at the time where he finished extract the files of the error "a dynamic link library (DLL) initialization routine failed."  Since then, I uninstalled my drivers and I can't always install the new drivers.  Now I'm stuck with no driver at all.

  I asked this question on NVIDIA support page and have not received a response, so I came here to ask.  Help is very appreciated.

  Thank you

  I understand your willingness to help me, but I have advanced and reinstalled windows. Got the new driver installed and everything works fine.

  Thank you

• a dynamic link library (DLL) initialization routine failed.

  Original title: DLL routine failed

  I downloaded a program from CNET. Did not work so I removed it. A day or two later, I get the following error a lot.

  There was a problem starting

  C:\Users\EDITIN~1\AppData\Local\Temp\sbussnv\ssnyoyr\wow.dll

  a dynamic link library (DLL) initialization routine failed.

  I ran the auditor system and program files Microsoft security and found no integrity issues.

  At this stage it would be easier to upgrade to Ultimate (I use Professional now) that in order to understand the problem of the DOF. I guess the upgrade I will lose all files/programs, correct.

  Thank you

  Yes, that's correct Loran.  You can use the Professional disc window and perform the upgrade. This will put just the new copy of your computer's system files.

  But if you have the Ultimate version, you can use the ultimate disc or the ultimate product key to upgrade.

• I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  HI lifeimagecreations

  Greetings!

  Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

  If this does not work, reinstall the program with administrative rights.

  Let us know if this helps

  Concerning

  ~ Assani

• MSOE.dll don't initialize - help!

  CAN YOU HELP ME SOLVE PROBLEMS WHY, WHEN I TRY TO OPEN MY MAIL, I GET THE MESSAGE "WINDOWDS MAIL COULD NOT BE STARTED BECAUSE MSOE." DLL CANNOT INITIALIZE '?

  Hi Lynncalaska,

  Thanks for posting on Microsoft answers Community Forums.

  This can happen if some files are corrupted on your computer. To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file.

  Access the link below and try to follow the steps, it could help us solve the problem.
  http://support.Microsoft.com/kb/936212

  Also access the link below to learn more about troubleshooting with Windows Mail.
  http://windowshelp.Microsoft.com/Windows/en-us/help/7ba4b73a-33ee-4237-A994-9840892440761033.mspx

  If the problem persists, reply came back with the following details:

  1 Windows Mail worked earlier on this computer?
  2. don't you make changes to the computer recently, when this problem occurred?
  3. do you have security software installed on the computer?

  It will be useful.

  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot open outlook express, the error message - ' failed to initialize msoe.dll/can ' t find msoe.dll.

  Earlier today, outlook express worked fine. I closed my laptop for an hour and outlook would not come, error instead, he adds that my drive is maybe full or memory full. Checked both, should have no problem.

  Hi Rhonda,

  This behavior can occur if the attributes of a part or all the messages Outlook Express *.dbx files are read-only.

  Method 1: Rename the Folders.dbx file.

  a. click Start, point to findand then click files or folders.

  b. in the named box, type folders.dbx.

  (c) in the area look in , click on your main hard drive (usually drive C), and then click find now.

  d. right-click on the Folders.dbx file and then click Rename.

  e. type folders.old, and then click OK.

  f. launch Outlook Express. This automatically creates a new Folders.dbx file.

  Method 2: Check to see if this article helps you.

  An Outlook Express basic repair kit

  http://support.Microsoft.com/kb/2398839

  Let us know the results.

• How can I fix WinMail error code 0 x 80070002, MSOE.dll could not be initialized?

  Suddenly, I was unable to access my aol e-mail account via winmail as I did for some time.  I get an error message that says: "Windows Mail could not be started.  initialize junk filtering.  Your computer may be out of memory or your disk is full. (0 x 80070002) ».  My only option is to click OK.  Can I get a second message which reads: ' Windows Mail could not be started because MSOE. " DLL cannot be initialized. "I ran virus scans, I tried to reinstall Windows Mail, I checked the Microsoft Knowledgebase and I restored my computer to a point before you have the problem.  I can access my AOL e-mail account via the Internet, but really have problems with the functionality, and I can't access any previous mail in my Inbox or one of my registered email.  Can someone tell me what's happened and how can I fix the problem?

  Hello

   
  Method 1: You can reset the message storage location and which can allow you to run Windows Mail.

  Navigate to the following location:

  Mail C:\Users\{yourusername}\AppData\Local\Microsoft\Windows
  Note: (The directory may be hidden, go to control panel |) Folder options | View and activate
  display of files and folders hidden and also uncheck the hide option
  extensions of known file types).
  Rename this directory from Windows Mail to Windows Mail old and then start
  Windows Mail and it will introduce a new message store in a new directory of Windows Mail.
  Note: If make you it work, then you can go to file | Import |
  Messages and point to the old directory.
   
  Method 2:
  You can try to remove the Windows Mail registry key and if
  It doesn't work, then try to delete the identity key.
  (a) click Start, type run and press enter
  (b) in the execution type search regedit and press enter
  (c) go to the following location:
  
  HKEY_CURRENT_USER\Software\Microsoft\Windows Mail
  HKEY_CURRENT_USER\Identities
  Note: Make sure WinMail is closed, right click on the key and
  Click on delete.
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756/
   
   
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail 
   
  
   

• Why not the msoe.dll install when I reinstalled from the cd

  Why MSOE file. DLL not install when I reinstalled my windows vista, thanks

  E-mail address is removed from the privacy *.

  Hello

  It is not Compatible with Vista... it was built for XP computers and will not install on later versions of Windows.

  the integrated web of replacement mail reader is Windows Mail, which is already installed.

  Start > Windows Mail (type in the search field)

  See the response given by Rick at this link

  http://www.askmehelpdesk.com/email/import-dbx-files-Outlook-Express-Windows-Mail-Vista-86458.html

  for instructions on importing your data from mail from XP to Vista.

  Kind regards.

• Vista installed, but it says msoe.dll has not been installed.

  I installed windows vista it says MSOE. DLL has not been installed.

  Hello

  1. What is the error message or an exact error code?

  2. Once you get this error message or error code?

  I suggest you run check and scan if tool (SFC) System File Checker can help.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows 7 system files: http://support.microsoft.com/kb/929833

  And also check the event viewer for the newspapers of the related events that could help us solve this problem:

  What are the information in event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Hope the information is useful.