MSVCP100.dll is missing error on Windows 8

Similar Questions

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• Get a dvacore.dll is missing error

  Hello

  
  I am trying to change a sequence in Adobe Premiere Pro Audition.cc and I'm getting a dvlcore.dll is missing error and it asks me to reinstall the program. My question is could someone tell me what the problem is and what program (audion or creation) that I need to reinstall

  See you soon

  I think it's a dynamic link file, try reinstalling the PP and if this does not work, also reinstall to the.

• Error AVFoundationCF.dll is missing, ICUUC36.dll is missing, Errror 7 (Windows error 126) to start Windows

  Original title: Errror 7 (Windows error 126)

  iTunes at startup problems...

  My laptop shows Sony: AVFoundationCF.dll is missing.

  ApplesyncNotifier.exe shows: ICUUC36.dll is missing

  Error 7 (Windows error 126)
  I tried to uninstall and re - install iTunes, but I keep getting these messages at startup.
  Advice please?
  It seems that many other people have the same problem as stated on google etc.
  Thank you.
  Geoffrey Salvage

  Hi Amelia,.

  1. Since when are you facing the issue?

  2 did you a recent software or changes to the material on the computer?

  You can try to repair the itunes and check if it helps.

  If this is not enough, then you can follow the steps provided and check.

  Method 1:

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Try to install itunes and check if the problem persists.

  Method 2:

  If the problem persists, you can run the System File Checker to scan. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Method 3:

  Important: Do not forget to back up the registry before you follow the steps in the link.

  Error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found.

  http://support.Microsoft.com/kb/959077

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this helps and let us know if you need more assistance.

• OLEACC.dll is missing error

  Message-OLEACC.dll is missing. I can't do system restore or go anywhere. Saving mode does not help.

  The problem occurs with all programs. I can open internet explorer but not Mozilla. Games does not open, can not run norton scurity or ad-aware.

  Hi Auman,

  Welcome to the Microsoft Answers site!

  Oleacc.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation.

  Oleacc.dll errors are caused by situations that lead to the removal or corruption of the DLL oleacc.

  Do a System File Checker:

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  See this link for more information about the System File Checker tool

  http://support.Microsoft.com/default.aspx/KB/936212
  Kind regards
  Karena a: MICROSOFT SUPPORT
  ---------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the "pcwum.dll is missing" error message when you open the Task Manager

  Original title: Windows 7 64-bit: task manager and windows update does not work, amd update failed to load detectionprogramm and crashes from time to time

  Sometimes, when I try to open the windows task manager it says: "Het programma kan niet worden gestart omdat pcwum.dll Land op uw computer. ' U * says clean mogelijk oplossen door het programma opnieuw you installeren. Basically, he says pcwum.dll is missing on my computer and I can fix it by reinstalling the program. As it is I can't reinstall the Task Manager. Also, when I try to check for Windows updates, it does not work because it says: "uh" momenteel niet naar "kan updates gezocht worden, omdat Windows Update-service niet actief is. U moet uw computer opnieuw opstarten mogelijk. "translated: you can not search for updates now, because the Windows Update service is not active." You may have to restart your computer. It says this all the time so I will have this since June have not updated since then. When I try to update my AMD updater it says there is a new version available, I now 12.6 and 12.8 update. Can I download and extract, but whenever I try to install it it says it can't find the driver detection program. I have an AMD ATI - Radeon 5700. My computer crashes now and then. I get the famous blue screen, who said he had a problem with a driver (probably one of my graphics card) and needs to restart. When it restarts I have first option starting in safe mode, but I can't update my drivers in safe mode so that didn't help out me. Please help me, I'm having this problem for a few months now, and it gets really annoying.

  Hello HenkVB,

  Thank you for the question!

  It is disheartening to know that have problems you with the the Task Manager, Windows Update and blue screen.

  Question: Pcwum.dll missing everything by opening the Task Manager.

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Question: looking for a Windows Update.

  Run the troubleshooter and check if that helps.

  Open the Windows Update troubleshooting tool

  Question: Blue screen

  Perform the steps in the link and check.

  Resolve stop (blue screen) error in Windows 7

  Meet us if you face any problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• d3dx9_34.dll is missing error when trying to start the game call duty

  When I tried to lunch call of duty 4 I got a message telling me the program cannot start because d3dx9_34.dll is missing. What can I do?  (iam windows 7)

  If you have recently installed Win7 Update DirectX can help (Win7 install all DX files)

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  It is also possible that the d3dx9_34.dll was corrupted. In this case, you will need to use full DirectX

  Installer of Redist (June 2010). This will overwrite all DX files and replace the files corrupted with a new file.

  Above the Web Installer does not overwrite existing files. It is only the installation of files "disappeared".

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  What follows is a list of the Direct X .dll you when files are updated.
  Go to Windows / System 32 folder (and SysWOW64 if you have 64-bit).
  They are in alphabetical order and will start with d3dx9 - 24 43 >. Then d3dx10 - 33 43 > & finally d3dx11 - 42 43 >.
  There was also - d3d9, d3d10 and d3d11 these come before the D3Dcompilers - 33 > 43.There are also three new XInput1 - 1 > 3.
  There are more files DX, but these are most of the graphs related to Direct X .dll.

• advrcntr2.dll is missing error.__how do I put back it

  M email addr. is

  E-mail address is removed from the privacy *.

  The following article describes how to recover from this:

  "AdvrCntr2.dll not found error resolution.
  "Steps to solve the AdvrCntr2.dll not found Error Message.

  <>http://pcsupport.about.com/od/findbyerrormessage/a/advrcntr2dll.htm >

  HTH,
  JW

• Windows 7 COMCTL32. DLL IS missing error

  Cannot open the form to make suggestions. .. Download, restore, restart... nothing that I have just the box on the screen saying error of comctl32.dll is absent. I have a computer windows 7 dell laptop. Help, please

  Hi Samwade,

  I suggest that you start the computer in safe mode and then run a file system (CFS) Checker scan your computer to solve the problem.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps.

• MSVCP140.dll is missing error after CC installed 2015.5 | Windows

  Well just installed PS CC2015.5 and tried to open the app and got this error

  

  Seems to be nothing else than the concern to update these PS of the day

  Well, I had finally sorted out it the problem for me was obviously Visual Studio C++ 2015 and when you try to reinstall I kept getting this error massage

  

  So decided to start in safe mode and try reinstalling Visual Studio C++ to 2015 and it work, re-installed, rebooted the PC and PS CC2015.5 now opens very well. So, if anyone has this problem, I hope this will help you!

  I would also like to say a big thank you to all who have provided assistance with this on the last 2 days and a big thank you Pete Green

• xlive.dll is missing

  Hello

  can anyone help with a xlive.dll is missing error, I installed darksouls for pc & when I try to run the game I get this error, I tried to install the .exe m/s client, but it does not work with error code 0 x 80070005 install, I tried this many times with the same result every time.

  I uninstalled the game client & gfwl & re-installed also many many times.

  My o/s is w7 ultimate & I don't have this issue with all other software/games just this newly purchased title

  Thank you

  I was looking in the GFWL installation folder and noticed dotNETFx40 of installation.   Win7 comes with
  .NET 3.5, so if GFWL has not already installed .NET 4 can do it manually.
  I uninstalled. Net3.5 and manually updated for .NET 4 a year ago. After installing .NET 4 there should be some Windows Update for it as well.
  I currently have. Net4 customer and 'Extended' (I think that 'Extended' might have been a updates).
  I'm pretty sure that. Net4 includes functions for all earlier versions. I had no problem with
  anything that uses the .NET framework since the installation. NET4.

  DOWNLOAD: Microsoft .NET Framework 4 (Web Installer) - Microsoft Download Center - Download details

  Maybe now that you have been able to install the old version, you can uninstall it and
  install the new version. There will likely be some files or registry entries
  Since the first facility to facilitate the installation of new - fingers crossed...

  If you have not actually been able to set up or to connect to the old XBOX account, you can do better
  When reinstalling more recent customer GFWL to start a new account with a new email address.
  If it is only the update that breaks then it may be better to stick to the old account when reinstalling.

  "He advises that gfwl needs an update & offers you a few links to follow for such update or what work! "so I check the updates manually & there is nothing available to gfwl,
  That's why former uninstalling and reinstall the new download is so often suggested.
  There were a few BAD DRM over the years, but GFWL probably takes the cake.

  .

• Error starting: &#60; root Windows &#62; \system32.hal.dll file missing or corrupt

  I used the Norton Utilities 15 on my Win XP = done many times with no problems, this time however she appeared with\system32.hal.dll file missing or damaged asking to reinstall a copy of the above file. F8 opens but doesn't correct; for example, in safe mode and the latest version of work etc does not work as always guests return to error. \system32.hal.dll missing or damaged file asking to reinstall a copy of the above file.

  I have no Win install drive as it came preoaded on my computer.  Is there anywhere I can get this file to replace or am I stuck with my recover the DVD file erase all my personal files/photos etc.?

  Hi KevinHassin,

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: &#60; root windows &#62; \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Error 'c:\windows\system32\spool\drivers\w32x86\3\lxcftime dll is missing' after trying a new registry cleaner.

  Original title: says my c:\windows\system32\spool\drivers\w32x86\3\lxcftime dll is missing

  I TRIED A NEW REGISTRY CLEANER THEN CANCELLED. AND THEN BEGAN TO GET MISSING FILES VIEW

  Hi albertdibley,

  • You have a Lexmark printer connected?

  If so, the error seems to be related for the Lexmark printer drivers.

  I suggest you to uninstall the printer and reinstall with the latest drivers from the manufacturer's Web site.

  Add or remove a printer

  Enter the number of the printer model in the following site to find drivers. Download and install the same.

  Lexmark support

• mwDaemon.exe - synenv.dll system error is missing (preventing installation Windows 10?)

  I try to install Windows 10.  It downloads and installs, and then stops at 99%.  I let it sit for more than 24 hours and it does not end.  I did it twice.

  I suspect that this missing exe may cause the problem.  When I restart, I get this pop up - mwDaemon.exe - system error synenv.dll is missing.  Everything seems to work ok otherwise, so I ignored.  I have read several posts on windows 10 installation problems and there was a lack of .dll and that's why I suspect that this could be the problem.  Can you tell me how to solve this problem?

  Please run a check of system files (SFC) & DISM if you're on win 7 or higher 
  
  
  All instructions are in our Wiki article below... If you have any questions please ask us.
  Check the file system (CFS) analysis and repair system files & DISM to fix things SFC cannot