MTS files take so long to import with play memories Downloader?

Similar Questions

• LaserJet pro m401dne: fatal error, takes too long to connect with the printer

  Downloaded the driver of HP software, started installation and got to the point where it says to connect the printer, did, he recognizes it, start the data transfer and just takes forever. After ten minutes, I get fatal error takes too long to communicate with the printer, if aging persists restart the computer and try again.

  I've made this 3 times now and same result.

  Since my laptop doesn't have a cd drive, I copied the cd to a flash drive and installed the software from that. Worked perfectly. Something must be missing or corrupted download. Anyway problem solved

• Saving a PDF file takes too long

  Hello world!

  The process of saving a PDF file takes too much time and content of one too many steps (from my point of view):

  1. file - save (Ctrl + S)

  2. to choose a folder

  3. to meet I want to replace the file (I understand not at all, why I am asking about the replacement: I work with a PDF - paint something, write something - and I would like to save all the changes of course in the same file)

  4. wait for the reader for PDF optimizes my file

  I would like to record in one step and in 5 seconds (like MS Office for example).

  Best regards

  Mikhail

  You can avoid the steps when you disable the safe_mode in Acrobat Reader preferences:

  

• Reading text file takes a long time after the first time

  Dear experts LabVIEW,

  I'm having a problem with playback of text file. I'm reading only each Nth line from a file to preview with this sub vi:

  

  I seems to work the first time I do it well. The loop takes almost no time to perform an iteration.

  Then when I load the same file with exactly the same parameters an iteration takes about 50ms.

  Subsequent attempts always seem to take longer execution time.

  Only when I restart the calling vi fast for a single file.

  When executing the sub vi alone it is still fast, but I don't see how the main vi (too complex to post here) could hinder the execution of the Sub vi.

  I have no one else to open the file in the main vi, I do not use too much memory...

  Just now I have not now where to look. Does anyone have an idea?

  Concerning

  Florian

  
  

• read txt large files (via Configuration files) takes too long

  Hello

  I want to read files txt large (about 1-8 MB) in memory.

  the structure of the file looks like this:

  [0]
  Shape = 'Point '.
  The size of the grid [nm] = 100,000000
  Dose of pixel [pC] = 0,100000
  Color = 0
  X = 38,169451
  Y = 10,102625

  and for example a 1 MB txt file contains about 8000 of these points.

  with the code current iam using it takes forever to the txt file is loaded:

  

  no idea how to make the code faster?

  Thanks in advance!

  The configuration files of NOR is notorious for its slowness.  It is generally not sensitive because you normally just read small amounts of data, but as soon as it's large structures, it is very sensitive.  OpenG has a config INI palette that allows you to read or to write something else that the low level is these screws NOR and it shows because it can be very slow.

  The solution is not to use these configuration screws instead I highly recommend the read/write of MGI nothing.  MGI says the chain of analysis from scratch and therefore it is super fast.  You can install the tools of MGI using VI Package Manager.

• AECC BUG? Photoshop groups is no longer the import with layer styles?

  Hello.

  I noticed something small.  But important to me.

  Import from a psd into After Effects works beautifully.  But in previous versions, when you import a psd model group resulting retains the layer styles.  This happens is no longer for me in CC.

  Everyone there this problem?

  Is this by design?

  Is this a bug?

  He will be back?

  Thanks for looking,

  -Josh

  After Effects has never read the layer on a group styles in a PSD file. Application of layer groups styles is a new feature in Photoshop CS6. After Effects CS6 and CC are not last updated to read the layer styles applied to groups.

  IOW, we just never wrote the code to make it work. I suspect that you were using a different method (for example, workaround below) to provide for several layers of Photoshop layer styles in After Effects.

  You can work around this limitation by transforming your group in a smart object layer. Right-click on the group in the layers panel, and then choose Convert to smart object. You will now see the styles of layer on the associated layers in AE, but styles will be editable and PSD layers will be merged unfolded, not a nested model.

  Please submit a feature request for all the features (like reading the layer on the groups styles, or editable on the smart objects layer styles, or to import dynamic objects as nested compositions) that you would like to have added to After Effects:

  http://www.Adobe.com/go/wish

• Oracle EBS 12.1.3 models, concatenation of files takes too long

  Hi guys
  I installed Oracle VM Server (3.1.1) and VM Manager (3.1.1) and now proceed to the part of concatenate files as mentioned with the 'readme' under download section model.
  
  «Concatinate and extract the .tgz files.» This step creates a directory
  with the name of the template that contains all the files for the
  model. »
  
  
  Cat OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM.tgz.0
  ------OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM.tgz.1
  ------OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM.tgz.2 | tar - xz
  
  for the application tier. I run this from a terminal (logged as root). As soon as I start this process, I get a pop-up indicating missing fonts (probably because of the command cat attempts to display the content of the files) and application layer concatenate process runs from last several hours. I checked the disk and nothing has yet been written to disk.
  
  My environment: VMWare player = > Oracle linux 6.2 (64-bit) = > VM Manager up and running 3.1.1, VM server hung upwards and both instances (Server VM VM Manager) servers communicate with each other as expected!
  
  Please confirm if this is a normal behavior
  
  Kind regards
  
  REDA

  PL try the entire command in a single line without using the continuation marker (\) - like this

  cat OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM.tgz.0 OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM.tgz.1 OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM.tgz.2 | tar -xz
  

  HTH
  Srini

• Playback jerky with MTS files

  I am recording video with a Canon HG10 camcorder, which exports MTS files. Although when I import them into Adobe Premiere Pro CS4 and try to edit the video is extremely chop. Not editable. I don't know if it's my physical features or something I can improve with the software. Any help?

  Entry door

  Core Duo 2.0 GHz

  4 GB of Ram

  Vista 64-bit

  You see a red line above the timeline?  If so, your source material does not match the sequence settings that you selected, and playback will suffer.

  If you have selected the right preset, or have the value manually the correct settings for a sequence, there is something more that you can do which will improve the reading.

  Most of my gear to my Canon HD camcorder is 1080 p, taken in "30 p" framerate.  I select a preset 1080 p is for 30 p framerate, and the source shows no red or yellow line above the timeline.  BUT it's still a little rough-looking at when played.  I found that this can be improved by right-clicking on the source clips in the project pane and 'Interpret Footage' as progressive (not in order of field).  You can do this either before laying elements in sequence or after - it affects them in the timeline panel after the placement, too.

  (This bit interpretation seems to be useful because many Canon cameras actually record their records 24 p and 30 p in a 60i Foundation and manipulate data to provide the progressive output.  You will see the evidence if you put these images (even if it's 30 p) in a 60i timeline, first willing to (sort of) and does no need for rendering of red or yellow line.  If you capture in 30 p all the time, you don't need to worry about this if you just interpret the film as above and regal is 30 p.)

  Advice of prejudice is true in general for AVCHD material, but it must be qualified to be of value, on the other, as in this case, does not thoughtfully address the potential of your system.  If the advice such as are not qualified with care, you can waste a lot of money on a warmer when machine you may in particular not be no need for one.

  I have edited many high-speed AVCHD projects relatively short with a frequency of 2.66 GHz Core 2 Duo - it all depends on your needs.  If you don't care about video in a perfectly smooth playback calendar and your editing features work very well and you add effects to your sequence or are not required to render the effects and transitions in your equipment if you use them, your system may be fine for you.  You may be fine with going to bed, while your project is encoded with the Media Encoder (or waiting in the next day!).  I was okay with that sometimes - I just had to move from the idea that he had always made.  I have not need the faithful reading of chronologies effect in charge most of the time, because I knew their content and saw the effects well enough without rendering.

  You will find your limit, but it's so so good to know that you can work with your system in a reasonable manner if you understand what is happening and accept the limitations with intelligent compromise.  Even if you get a more robust system, you will be able to benefit from such considerations anyway.

• . No noise from the MTS files

  We use Premiere Pro to edit. MTS files.  We constantly had problems with Premiere Pro does not sound matter.  Normally, updated everything (not only Premiere Pro) will solve this.  We currently have a machine were nothing works, and from this second, we remove Premiere Pro to reinstall and try again.

  This nonsense of constantly fighting for the Premiere Pro to import sound lasts for months.  Why is it such a horrible struggle?  Is there something we can do?

  There are some good suggestions here, and I'll add a reminder for people to use the media browser to import media (as opposed to the import dialog box) with potentially dependent file like MTS formats.

  By 'folder-dependent', I mean the video may be in a directory and audio can be a file in a separate Directory. Then, if you import the video directly it can not see the audio. The media browser is smarter than the import dialog box, so he knows generally how access and import all of the media into a single import. The MTS files are not always dependent case (actually in most of my own media, they aren't) but they can be so it's good to use the media in doubt... browser and which would go to most of the other formats as well.

• No noise imported with the mts file

  I have a paid subscription to CS6 version. I try to import a mts file but no audio only appears in the panel mounting. It worked perfectly yesterday. I can listen to excerpts in bridge without problem. I can read with vlc player without problem. What is going on

  No problem. I didn't get your suggestions as insults. It's just Murphy's law struck just when I needed to do something. I didn't know about the card. It's a PNY Pro 16 GB. I did download and reinstall and now everything works fine. I really do thank you for your time and your input.

• Masks of Opactiy takes too long to save as a .png file

  Hello

  I have a file .ai 24 x 36, which has about 35 in it opacity masks.

  I want to save it as a .png file.

  But when I try in illustrator it takes a long time to perform this task.

  I then tried to put the file in Photoshop, but it also taks a long time to open in Photoshop.

  Is there a way I can reduce the time?

  (I'm done editing the file... All layers and opacity masks can be put in a single layer, as long as I am able to retain the transparency. Maybe this will get rid of opacity masks and the file will open and save faster? But I don't know how to do this. Suggestions or other solutions workaround?)

  Thank you.

  You are using an outdated version on a somewhat common system that is not really compatible with the application.

  In addition to this: CS5 is a 32-bit software. This means that it cannot address more than 3 GB of RAM. No matter how much RAM is there (but 4 GB is not that much anyway, given that the system needs... and... your browser and the Flash plugin... and e-mail... and Photoshop software). So while Illustrator might deal with/3 GB, it might be only 1 GB available...

  So, basically, it is not a surprise, Illustrator and Photoshop are taking their time to number crunch your file.

• Import of files is no longer possible?

  Import of files is no longer possible. A few minutes ago, it was no problem, but it is now. When I try to import a file I get the text: "could not copy a file to the requested location". Can someone help me with this problem. I tried with different files. Thank you very much in advance!

  

  The destination folder is here:

  

  You must determine which folder is selected it and then change the permissions in your operating system for this ACCURATE to write file

• MTS files import does not in first CC 2014

  I just installed new updates and tried to start a new project in first CC 2014 and import MTS files. I get an error message saying "the file has a compression type not supported."

  I have worked with MTS files in first for awhile now, but I'm stuck which dates back to the old CC Premiere because it's the only way I can import these files. I found one of the great new things in 2014 CC BEST support for MTS and other formats.

  Help, please! I'm really excited about all the new features in this update and want to be able to use them for work, but right now I'm super disappointed.

  Thank you

  Jase

  I've seen a lot of reports like this, then something goes well.

  Try to rename or move the folder with the media.  Then , open the project in 2014 CC.  It will ask you where is the press, that it points to the file renamed or moved.

• No audio track the .mts file created with panasonic camcorder

  I am running windows 7 and adobe first 6.  I have some .mts files recorded with a camcorder from panasonic hmc.  These videos have played very well with the sound on the computer. But once they are imported in the first, there is no audio data, in fact, the track is missing.  First unsupported of .mts files? Is it possible to convert them into a format supported by first?

  I did more research and found out that it is a known issue, using first 6.  The job easier is about to extract the audio using a third party program and then import it separately.  Fortunately I have only 10 clip 30 min to spend so it took only 4-5 hours out all audio.

• First Elements 9: no sound with the .mts files

  I'm having a little problem getting my mts/avchd files to work with PE9. I imported the files using the Organizer, and they play very well (video AND audio) from the Organizer, but when I import clips into PE9, only the video is imported. There is no audio track and (logically?) no audio to be heard. How can I fix it?

  Mind, these .mts files play fine in both the Organizer AND windows 7. They are created on a Canon HF100 camcorder.

  The trial version of the PROGRAM itself is fully functional. However, some third-party components are not, unfortunately. It's some MPEG and AVCHD components.