MTU 9000 on question of VM Client FTP/SCP esx4 (or esxi4)

Similar Questions

• MTU 9000 ISCSI independent seur ESX 3.5 server map

  Hello

  Is it possible to set up an independent ISCSI storage card in MTU 9000 (Jumbo frames) on an ESX 3.5 Server

  Or at least how can I know my tr card is already configured in MTU 9000, ( Attention! I speak well a hardware independent ISCSI card!) and not software or dependent.

  Thank you in advance.

  Hello

  first I want to thank you pour your answer, but as I explain in my question it's a card ISCSI independent (hardware) and software, but I found an answer to my question

  the command is:

  esxcfg-hwiscsi - l vmhbaX (X is the number of your HBA card)

  Thank you in advance.

• Basic question on the client connection to the Fund with several oracle instance

  Oracle 11:
  
  I have just a basic question about how doing listener/customer determine how oracle instance to connect to:
  
  1 tnsnames.ora and listener defines the configuration of the host and the port is that how he comes to know? I'm just trying to understand if the request comes to the listener how listener knows what Oracle instance to route traffic to?
  
  2. when I do sqlplus / as sysdba how knows what Oracle instance to connect to?

  Look at the differences

  [oracle@srv01-18-102 trace]$ cat $ORACLE_HOME/network/admin/listener.ora
  
  cat: /u01/app/oracle/product/ 11.1.0/dbhome_1/network/admin/listener.ora: No such file or directory
  
  -- start listener
  
  [oracle@srv01-18-102 trace]$ lsnrctl start
  
  LSNRCTL for Linux: Version 11.1.0.7.0   on 09-JUN-2009 01:05:42
  
  Copyright (c) 1991, 2009, Oracle.  All rights reserved.
  
  Starting /u01/app/oracle/product/ 11.1.0/dbhome_1/bin/tnslsnr: please wait...
  
  TNSLSNR for Linux: Version 11.1.0.7.0
  Log messages written to /u01/app/oracle/diag/tnslsnr/srv01-18-102/listener/alert/log.xml
  Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=1521)))
  
  Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 11.1.0.7.0
  Start Date                09-JUN-2009 01:05:42
  Uptime                    0 days 0 hr. 0 min. 0 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Log File         /u01/app/oracle/diag/tnslsnr/srv01-18-102/listener/alert/log.xml
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=1521)))
  The listener supports no services
  The command completed successfully
  
  -- startup database
  
  SQL> shutdown immediate
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  849530880 bytes
  Fixed Size                  1346664 bytes
  Variable Size             725615512 bytes
  Database Buffers          117440512 bytes
  Redo Buffers                5128192 bytes
  Database mounted.
  Database opened.
  
  SQL> alter system register;
  
  System altered.
  
  -- check again after a while (or for registration via "alter system register")
  
  [oracle@srv01-18-102 trace]$ lsnrctl status
  
  LSNRCTL for Linux: Version 11.1.0.7.0    on 09-JUN-2009 01:05:50
  
  Copyright (c) 1991, 2009, Oracle.  All rights reserved.
  
  Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 11.1.0.7.0
  Start Date                09-JUN-2009 01:05:42
  Uptime                    0 days 0 hr. 0 min. 8 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Log File         /u01/app/oracle/diag/tnslsnr/srv01-18-102/listener/alert/log.xml
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=2100))(Presentation=FTP)(Session=RAW))
  Services Summary...
  Service "DEMO" has 1 instance(s).
    Instance "DEMO", status READY, has 1 handler(s) for this service...
  Service "DEMOXDB" has 1 instance(s).
    Instance "DEMO", status READY, has 1 handler(s) for this service...
  The command completed successfully
  
  -- BEQUEATH
  
  SQL> host
  [oracle@srv01-18-102 ~]$ set ORACLE_SID=DEMO
  [oracle@srv01-18-102 ~]$ sqlplus / as sysdba
  
  SQL*Plus: Release 11.1.0.7.0   on Tue Jun 9 01:17:42 2009
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
  With the Partitioning, Oracle Label Security, OLAP, Data Mining,
  Oracle Database Vault and Real Application Testing options
  
  -- Query V$PROCESS
  
  SQL> desc v$process
  
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   ADDR                                               RAW(4)
   PID                                                NUMBER
   SPID                                               VARCHAR2(24)   <---
   USERNAME                                           VARCHAR2(15)
   SERIAL#                                            NUMBER
   TERMINAL                                           VARCHAR2(30)
   PROGRAM                                            VARCHAR2(48)
   TRACEID                                            VARCHAR2(255)
   TRACEFILE                                          VARCHAR2(513)
   BACKGROUND                                         VARCHAR2(1)
   LATCHWAIT                                          VARCHAR2(8)
   LATCHSPIN                                          VARCHAR2(8)
   PGA_USED_MEM                                       NUMBER
   PGA_ALLOC_MEM                                      NUMBER
   PGA_FREEABLE_MEM                                   NUMBER
   PGA_MAX_MEM                                        NUMBER
  
  SQL> select * from v$process where program like '%(TNS V1-V3)%';
  
  52ACC7FC         19 26000                    oracle                   2
  UNKNOWN                        [email protected] (TNS V1-V3)
  
  /u01/app/oracle/diag/rdbms/DEMO/DEMO/trace/DEMO_ora_26000.trc
                                                             1286124       2699092
           1048576     4616664
  
  1 row selected.
  
  -- "Jump to OS"
  
  SQL> host ps -ef|grep 26000
  
  oracle   26000 14346  0 01:09 ?        00:00:01 oracleDEMO (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
  oracle   27040 14346  0 01:16 pts/1    00:00:00 /bin/bash -c  ps -ef|grep 26000
  oracle   27042 27040  0 01:16 pts/1    00:00:00 grep 26000
  
  -- Connect via listener to the database
  
  -- content off tnsnames.ora
  
  [oracle@srv01-18-102 trace]$ cat $ORACLE_HOME/network/admin/tnsnames.ora
  # tnsnames.ora Network Configuration File: /u01/app/oracle/product/ 11.1.0/dbhome_1/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  DEMO =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = srv01-18-102.amis.local)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = DEMO)
      )
    )
  
  [oracle@srv01-18-102 ~]$ sqlplus otn/otn@DEMO
  
  SQL*Plus: Release 11.1.0.7.0   on Tue Jun 9 01:28:52 2009
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
  With the Partitioning, Oracle Label Security, OLAP, Data Mining,
  Oracle Database Vault and Real Application Testing options
  
  SQL> set head off feed on
  
  SQL> desc v$process
  
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   ADDR                                               RAW(4)
   PID                                                NUMBER
   SPID                                               VARCHAR2(24)   <---
   USERNAME                                           VARCHAR2(15)
   SERIAL#                                            NUMBER
   TERMINAL                                           VARCHAR2(30)
   PROGRAM                                            VARCHAR2(48)
   TRACEID                                            VARCHAR2(255)
   TRACEFILE                                          VARCHAR2(513)
   BACKGROUND                                         VARCHAR2(1)
   LATCHWAIT                                          VARCHAR2(8)
   LATCHSPIN                                          VARCHAR2(8)
   PGA_USED_MEM                                       NUMBER
   PGA_ALLOC_MEM                                      NUMBER
   PGA_FREEABLE_MEM                                   NUMBER
   PGA_MAX_MEM                                        NUMBER
  
  SQL> select * from v$process where spid in (27372);
  
  52ACC7FC         19 27372                    oracle                   4
  UNKNOWN                        [email protected]
  
  /u01/app/oracle/diag/rdbms/DEMO/DEMO/trace/DEMO_ora_27372.trc
                                                              705064        938372
                 0      938372
  
  -- Use info off v$process to join with v$session
  
  SQL> select * from v$session where paddr = '52ACC7FC';
  
  52112690        170          9     107441 52ACC7FC         93
  OTN                                     3 2147483644
                           ACTIVE   DEDICATED         93
  OTN                            oracle
  27370
  srv01-18-102.amis.local
  pts/1                          [email protected] (TNS V1-V3)
  USER       4C83D838     1817844678 4qpuh5jq5n6y6                0
  09-JUN-09             16777216 4C83443C      1421292656 b1vt3u9abfd3h
                  0 09-JUN-09              16777216
  
  SQL*Plus                                          3669949024
                                             0
  
                  8244            -1              0               0             0
  09-JUN-09                     0 NO  NONE          NONE       NO
  OTHER_GROUPS                     DISABLED ENABLED  ENABLED
                       0
                                                                   NOT IN WAIT
                                             41        322
  SQL*Net message to client
  driver id                                                        1413697536
  0000000054435000
  #bytes                                                                    1
  0000000000000001
                                                                            0
  
  00                  2000153315           7
  Network                                                                  -1
                0 WAITED SHORT TIME                14
                        3730
  DEMO                                                            DISABLED FALSE
  FALSE FIRST EXEC                100 52ACC7FC               4
  
  -- Use info off V$process to look pid on OS
  
  SQL> host ps -ef | grep 27372
  
  oracle   27372     1  0 01:30 ?        00:00:00 oracleDEMO (LOCAL=NO)
  oracle   27413 27380  0 01:30 pts/1    00:00:00 /bin/bash -c  ps -ef|grep 27372
  oracle   27415 27413  0 01:30 pts/1    00:00:00 grep 27372
  

• Tecra 9000 upgrade question!

  Hello my name is tom and I have a toshiba tecra 9000.
  My problem is that the original toshiba 20 GB hdd is vice
  and I want to buy a new toshiba HARD drive.
  My question is:
  Gigabyte how can I install it on my laptop?
  I want to buy a 40 GB, 60 or 80 GB HARD drive
  is one of this size HARD drive compatible with my toshiba tecra 9000?

  EDIT:
  I forgot:
  The laptop has:
  1000 MHZ
  512 MB of Ram
  standard 20 GB HARD drive
  WLAN to edge (default external PCMCIA netgear Wlancard)
  16 MB S3 Graphics card
  14.1 "display

  Thanks in advance for answers

  Thanks apco. Great info! :) You have to test it on your Tecra? I hope that you did not notice any problems here.

• Client FTP FileZilla does not appstacks connect

  Ftp client FileZilla is not connection to the remote server and get the error like below. but when naively installs.

  Native ftp client Windows works fine at the same server 'ftpsite.vmware.com '.

  

  

  Also noted filezilla was not allowed in the firewall and I greeted the filezilla in windows firewall, after that also, it doesn't and I restarted the VDI, sparkling inters machine I do not see the Firewall entry that I did for filezilla after a reboot.

  

  HI, Germain,.

  This problem has been resolved and this problem is with appvolume, we must give a reverse in the stack app model as entry below and the snapvol.cfg in writable.

  # Reverse the entries in the file repeated

  # WorkAround for some applications failing during execution of AppStack. This change offers configurablity to

  # specify the path in snapvol.cfg to replicate the EXE for the path specified for the System Volume.

  # Specifies the path to the help:

  # snap_replicate_file = program files

  # Behavior: Now all the EXE files on the Appstack with the corresponding suffix path Program Files

  # (IE \device\HardDiskVolume2\Program Files\xxxxx) will be replicated in c:\Program Files\xxxxx

  #

  reverse_replicate_file = program Files\Citrix\AuthManager\AuthManSvr.exe

  reverse_replicate_file = program Files\TortoiseSVN\bin\TortoiseProc.exe

  reverse_replicate_file = files of programs (x86)\Citrix\AuthManager\AuthManSvr.exe

  reverse_replicate_file = files of programs (x86)\TortoiseSVN\bin\TortoiseProc.exe

  reverse_replicate_file = files of programs (x86)\Google\Chrome\Application\chrome.exe

  reverse_replicate_file = files of programs (x 86).

  reverse_replicate_file = program Files\

• questions of vSphere Client Web - (noob)

  Hello! I'm not sure if this question goes here or not, if not could someone move it to the right forum? Thank you

  IM pretty new to VMWare, but have a number of hosts running ESXi 4 and 5.0, each is a separate host managed by the vSphere client. We recently received a new server and installed ESXi5.5 to findout we vSphere Web Client to manage the virtual machines. My question is can I use a web client of vSphere to monitor multiple physical hosts?

  Our facility is 4 physical hosts all versions the ESXi running, all independent - nothing fancy. We also have a San with two physical hosts in a cluster off site in another data center (a different IP address connected via WAN). This host is configured with the Id like to, at least temporarily, where I want to manage the new vSphere web ESXi5.5 Server client. Is this possible? I get errors when adding it.

  Thank you!

  You can manage everything from a single Web Client vSphere since all hosts are added to vCenter and hosts are compatible with your server vCenter... you must ensure all the required ports are open through your WAN link. To configure a new Web Client vSphere you still need a compatible version of vCenter.

• Question about mobile client synchronization

  Hi guys,.

  Is it possible to synchronize a client mobile android to an oracle database in backend without having to create users on the Mobile of Oracle database server? Because in my scenario, mobile users are stored in a table in the back, and new users can be added periodically. I need the ability to sync with their identity papers. Is there a way to do this?

  Thank you.

  Hello

  There are a lot of things you could do for that.

  for example if the users are added to a table, you could define a trigger whenever a new user is registered and enter its information into another table (lets call him NewUsers). Then make a service that watches over this table NewUsers every say 5 mins (?) and if he finds a new user then he will go and add it in oracle lite as a user. You can see the code in the other thread initiated by gambro2.

  If users are added by your handheld, then you can create a web service that runs the code in question gambro2 that adds new users.

  If you perform a synchronization between database olite and another one (maybe an erp) put the controls there.

• Newbie question on a client-server application architecture

  I did some stuff in Java for awhile now, but I have never drawn in the network part of this one. I followed the tutorial to Oracle and I searched some other resources on the web. I don't have a very specific question, but I would be grateful if someone could help me understand all this. My goal in this learning project is to make a server application that will accept an unspecified number of independent of a client application connections. I think that I get the basics of establishing a ServerSocket on the server, put in place the socket on the client, and then open the entry and outflow on both and start a data transfer.
  
  Now, I think I'm stuck in a misunderstanding on this transfer. All of the examples I see seem to treat data transfers when the order who speaks on each side is already known, so you send something good after connection and that you set the other side of eligibility receive something after the connection, and everything works fine. If the order is not known, but I can't seem to understand the flow of the application logic.
  
  Let's say that the server gets 3 connections of 3 customers and save these Socket objects in an ArrayList. Then client B asks something, and the server responds accordingly. Later, the server needs to say something to client B, then it sends information through its support and client B responds accordingly. How should I go about setting up something like that? I think I should put listeners but I can't find examples like these, or do I define the infinite loops for each socket, try to read the data?
  
  Any help to guide me in the right direction would be much appreciated.

  Think of a very basic chat client-server application. When a client connects, it receives all messages written by other customers. It can also send messages that will go to all other customers. It is very similar to your uncertainty about who will speak in the first place, the server or the client. If users wait a bit after the connection, it is likely, that the server will talk first (because another user sent a message). If the customer/user is fast, he'll talk first ("Hello World" or something like that). There are examples of these applications of simple chat on the web, just google for them. And Yes, this is usually achieved with infinite loops. Every customer will have a such loop, try to read data from the server and the server will have as many endless loops simultaneously assets (think multi-threading) given that the connected clients.

• A question about Automatic Client failover

  Hello everyone
  
  My question is this:
  
  What are the versions of the client which supports automatic failover of Client in a Configuration of data protection?
  
  Thank you very much.

  Hello;

  It goes back at least 8.0:

  8.0.x - 8.1.x: example configuration of failover (TAF) transparent Application on UNIX [69745.1 ID]

  I don't remember much of Oracle 7.

  H3. But then, that's why exist databases.

  Oracle fail Security Concepts and Administration Guide version 3.2.1 for Windows NT and Windows 2000 A95194-01

  Not sure it confirms more than 8 but at some point, no matter his more long than the Oracle, the operating system software and hardware is all desupported. In addition, they will not work with something new.

  Best regards

  mseberg

  Published by: mseberg on April 11, 2012 14:03

  H3. Research link problems

  These are:

  http://docs.Oracle.com/HTML/A95194_01/title.htm

  http://docs.Oracle.com/HTML/A95194_01/TOC.htm

  With the help of A95194-01 for research.

  Published by: mseberg on April 11, 2012 14:52

  Found this (most recent)

  http://docs.Oracle.com/CD/E10736_01/doc/server.341/e11080.PDF

  Published by: mseberg on April 11, 2012 14:55

  Not her, but can help

  http://www.Oracle.com/technetwork/documentation/Oracle9i-arch-901-096298.html

  OR

  http://www.Oracle.com/pls/Tahiti/homepage

  H3. Closer: (10 year, pdf)

  http://docs.Oracle.com/PDF/A96684_01.PDF

  http://www.Oracle.com/technetwork/CN/TestContent/failsafe-091972-ZHS.html

  Published by: mseberg on April 11, 2012 15:00

  Published by: mseberg on April 11, 2012 16:06

• MTU 9000 on vSwitch?

  Hello

  I have 2 clusters connected to the netapp storage. first group (all hosts) have vSwitch 2 connected to storage, and there the value 9000 MTU. But the second group vSwitch2 MTU 1500 (default) value.

  As I have before has obtained information of VMware MTU size 9000 is not supported by VMware for version 3.5. How do you think, should I change the size mtu for all servers in second cluster to 9000 as the first server, or should I leave it by default? If it has no impact on the performance of storage on the current storage?

  Switch name Num used Ports configured Ports MTU rising ports

  64 4 64 1500 vmnic2 vSwitch2

  What is the MTU to the storage? larger value makes greater performance?

  OK and what happens if this vmknic is already configured? should I just type this command with the ip address and the mask but with 9000 mtu? is that enough?

  The only way is to create a new interface vmkernel and delete the old.

  André

• Difficult question: keep model of FTP files

  First of all, I want to say hello to anyone reading this thread, I'm new to the forum and I hope to help as much as I can in getting the help I need!

  With that issue aside, here is my problem.

  I took during the development of a corporate Web site and have just learned that the previous developer had very little to transfer through.  I could catch pretty well everything what I needed once I had FTP access.  However, I can't locate or get their hands on the model files used to create the site.

  The site was created in goLive, which I don't think there is more.  I see the template file used on all htm pages, but I can't find the file anywhere on the server.

  I was under the assumption that you need the templates on the server, perhaps that this was not the case in the days of goLive?

  The only thing I noticed COULD be the reason why they are not required is all pages (htm file) use the full coding of the template at the top of the page (in the footer). It's grayed out and not editable, but it seems to compile.

  My questions are,

  (1) someone can enlighten me on this question (should I look elsewhere for model files)?

  (2) would be bad practice if I took one of the pages, it detaches the model, deleted content then produced a model from this file?

  Sorry if my problem is confused, I tried to explain it the best I can!

  Thanks for reading and look forward to your response,.

  Robbeh

  Hi Robbeh,

  1. Template files (DWT) are only required in the production environment, no need to be online
  2. It's not bad practice in this case, in fact, this is the recommended method.

  GRAMPS

• FTP with DW CS5 problems that do not occur with a client FTP or MX

  On a mac OS 10.6.4 with DW CS5 to you connect to an existing FTP site.  It connects fine, but then all I get is a .txt file with a note indicating that FTP cannot be used when the Frontpage extensions are enabled. I checked the status of my Web server (to 1 & 1) and they are not active. So, I tried with a FTP client like cyberduck and all files are there. Similarly, I used an older version of DW (think it's vintage MX 2002) and all files appear on the server-side (I just can't download the site due to the incompatibility of version so DW rejects him). Anyone know what could go wrong here? As far as I know the site has been created by DWMX (think it was in 2004). Thank you

  Response sent a private email.  Hope that's OK too!

• question on the client and the server

  Hi guru,.
  
  I have a question for you all.
  

   I am having an Oracle 9i on client machine and oracle 11g on Server machine.
  
  
   Can I run the scripts of Oracle 11g version on the 
  client machine to access the database on server machine?

  Can I have oracle 11g on the client machine and oracle 9i 
  on the server machine and run oracle 11g scripts on client machine to 
  access server database?

  Thank you
  
  Published by: user10679113 on January 2, 2009 07:41
  
  Published by: user10679113 on January 2, 2009 07:41
  
  Published by: user10679113 on January 2, 2009 07:42

  Hello

  1 - Yes, most likely but I would setup a client g 11 year manage several houses

  2-No, at least for the new features (10g, 11g) not supporded on 9i.

• Question of VPN Client

  As far as I know that VPN (anyconnect or ipsec) clients or the firewall is not a restriction that each client that connects and establishes a VPN session must have a single public ip address. Let explain me, if we have 10 people (contractors) works in an office behind a firewall remotely, share one public IP address and we do not want to create a site to site vpn connection, then these 10 people can always use anyconnect VPN in the seat.

  They all share the public IP address same, single address when they VPN in HQ.

  Hello

  Yes, all people in a remote region will be able to connect to the Central Office with the AnyConnect client, even if they have the same public IP address.
  This is the case, because different clients AnyConnect sessions will be different source TCP ports.

  What IPsec and old Cisco VPN Clients? The situation should be the same, the VPN Clients because Cisco are behind NAT. Thus, they will have to use NAT-traversal and UDP 4500 to encapsulate the session of ESP. And UDP there is also used different source port numbers.

• Classic question: SSL VPN Client and Vista 64 - bit OS

  Material: 64-bit software architecture: Windows Vista Home Cisco Hardware (64-bit): 871w router Cisco Software: base of 12.4 T having a challenge with Windows Vista (64) using the SSL VPN. Use of IE, I can navigate to the url, both using the DNS name and IP address. I do not have a signed certificate, so I get the standard warning screen where you will need to click on the red x to continue. At this point, the progress bar moves for a fraction of a second and it's there. For troubleshooting I tried: - clearing cookies, cache, etc. - add url and IP to the Zone of confidence - reset areas rest default - disabled options window popup and phisher IE7 - off all 3rd party Manager BHO - withdrawal of MacAfee software suite - disable User Control that allowed me to make the sign in page, but after the signature - I had a blank white screen. Then, I downloaded Firefox 3.0 (newer) and tried to connect. After a series of guests to accept and download the certificate, I was able to connect and click on the Start button to start the session. The next little screen came as expected and he chose Java. I received a message that it could not install the Cisco AnyConnect Client's and I had to download it manually. Downloaded and installed the client software. Logging out of the browser and its closure - I could not access the page again. It appeared to hang again with a progress bar. I went to empty cache, cookies, passwords etc in Firefox and reloaded the application. Still, I was able to connect. However, I always received the message that the customer could not install and download manually. For fun, I exported the certificate on the desktop and imported into Internet Explorer. I tried the connection with IE, but he had a similar problem. I was told there was no client IPSEC for OS 64 bit (Vista at startup), but most of the new machines are 64 - bit OS systems. I would appreciate any support. Lucky me, the computer to which it is impossible to connect to the VPN is the home of the CEO of the company. The last person that wants to make him miserable.

  Cisco AnyConnect VPN Client is now available for the Windows operating systems, which includes Vista 32 and 64 bit. The Cisco AnyConnect VPN Client, Version 2.2 supports SSL and DTLS. It does not support IPSec at the moment.

  See the url below for more information on troubleshooting anyconnect vpn client:

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00809b4754.shtml

  See the following url for the release notes for the version of the client anyconnect vpn 2.2 for use with windows vista:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect22/release/notes/anyconnect22rn.html#wp815989