Multi-hypervisor Manager vCenter

Similar Questions

• Error opening Multi-hypervisor Manager - sever fault "NoPermission" got no message.

  I installed vCentre Multihypervisior in a test environment running vCenter 5.5.  As it is to test, I installed components on the server using the administrator account for the domain side. Service runs on the VC server.

  have also installed the client component on the VC Server also. When to launch the vSphere client and by launching the "Multi-hypervisor Manager vCentre" Plugin, I get the following error message, I attach too.

  The flaw of sever "NoPermission" has no message.

  The administrator seems to have full access to vCenter inventory.

  Any ideas?

  Thank you very much

  Hello

  During the installation of MHM, you used an administrative user of VC (see screenshot below). This user becomes the default administrator for MHM inventory. Can you please try to connect with this user.

  VC permissions and authorization of MHM are separated.

  Thank you

  -Marcel

• Manager of Multi - Hypervisor, VMWare - unable to connect to the host

  
  I installed a Multi-hypervisor-VMWare in a test running vCentre 5.5 environment. However, when I try to add Microsoft Hyper-V, it says "Unable to connect to Host."

  WinRM are enabled on the Hyper-V host computer. Also, I tried to manually add its IP address on the TrustedHosts in Winrm. Still no go. Can someone please provide some guidance.

  Hello

  Hyper-V R2 2012 is not supported by the hypervisor Manager Multi, so your problem with the addition of the host.

  You can refer to the Release Notes for more information.

  HTH,

• What is the purpose for TMM (Microsoft transient multi-monitor Manager) in Task Scheduler?

  I need some information regarding the purpose and the use of a Scheduler application named TMM or Microsoft transient multi-monitor Manager, please.  Judging by the name of this task, I guess that it is necessary for this application runs when more than one monitor is connected to a computer.  Am I correct in this assumption?

  Because I only have one computer and it has never been more than one monitor hooked up to my computer, do I really have transient multi-monitor Manager Microsoft runs all the time?  If this application does not need to run in my computer, is - it normal that TMM is disabled?

  Janice M. Strunk

  This can be interesting to read. Here is a response from forum Discussion of Vista. Contrary to what you and I thought, this response has proposed.
  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.Windows.Vista.General&mid=db368e16-dbd1-4654-B644-678d47674c7c&SLOC=en-us

  Enable or disable TMM
  http://www.Vistax64.com/tutorials/115320-Transient-Multimon-Manager-TMM.html

  t-4-2

• How many clusters manage vCenter Server?

  How many clusters manage vCenter Server?

  I have 8 HOST ESXi 5.1 on a cluster.

  and I want to remove 2 cluster HOST to add the VDP Advanced key and form a new group.

  can this change?

  I can't found the maximum number of clusters a vCenter can handle, only the maximum number of hosts per cluster, which is 32... but altogether, you can have more than one cluster without problem.

  Do a little math, since vCenter supports 1000 guests and each group can have 32 guests, maybe you can have at least 32 clusters... but not 100% on it.

  http://www.VMware.com/PDF/vsphere5/R51/vSphere-51-configuration-maximums.PDF

• vSphere 6.0 + is not compatible with vmware vsphere Update Manager vcenter you install.

  Hello

  We run with vCenter 6.0 version 6.0.0 build 2997665.

  Installing Update Manager in different windows server with vCenter 6.0 U1 installation media.

  During the installation of Update Manager, it gives below error.

  Error: Vcenter is incompatible with vmware vsphere Update Manager that you are installing.

  Problem has been resolved after downloading installation VC VMware-VIMSetup-all - 6.0.0 - 2800571.iso, which is compatible with running VC build version.

• Can't see vsa on the client Manager vcenter web

  Hello

  VSA, I installed on my system vcenter 5.5, but I do not see the Manager tab of vsa on any of my client screens web vcenter.

  I tried to follow the instructions to enable it, but they do not match what I see:

  on the 5.5 documentation page (ESXi and vCenter Server 5.5 Documentation > vSphere storage > vSphere Storage Appliance > troubleshooting a Cluster VSA) it says in step 2:

  "From the homepage of the vSphere Web Client, click Administration and click management plug-ins under Solutions."

  The only thing that appears on my admin page to the title of 'solutions' is:

  client plug-ins

  vCenter orchestrator plugin

  SSO admin interface plugin

  vchsplugininstaller

  machine virtual vsphere update manager client web plugin

  journal browser

  vCenter Server Extensions

  Management vServices

  vSphere esx agent handler

  There seems to be no way to turn it on.  Can someone help me?

  Thank you in advance!

  -jason

  Hello

  It turns out that it is "standard solutions" tab: the wizard to configure the thing.  Not in the docs so: support VMware reported it via youtube videos.

• Get the message of sufficient permissions to retrieve the data when I try to access Update Manager vCenter 5.5

  I've recently upgraded to VMware 5.5 and I'm having a problem with the Update Manager for where it says I don't have permissions to use it.  The plugin installs fine without errors.  I myself install as administrator, but it still doesn't let me use it.  I am using vCenter to manage my guests.  Any suggestions?  Thank you!

  Ty

  To resolve this problem, update manager must be registered for the vCenter Server. This can be done by reinstalling Update Manager, but it can also be done without having to re - install.

  Step 1.

  Remove vCenter update manager plugin by following VMware KB: suppression of the unwanted plugins to vCenter Server

  Step 2.

  To connect to the server on which the Update Manager is installed

  Open the Update Manager utility that is located in your Update Manager installation directory: VMwareUpdateManagerUtility.exe (located by default in C:\Program Files (x 86) \VMware\Infrastructure\Update Manager\)

  Select Save again with vCenter Server

  Enter your credentials to the vCenter server and select apply

  Once the operation is completed successfully, you are prompted to restart the Update Manager service.

• Operations Manager vCenter don't watch do not work load Matrix on 1 of the 3 ESXi servers

  Hello

  
  I need help troubleshooting.  This last weekend, we have improved our main router of L3, which caused a tizzy with networks (duhh!)   After the task was completed, operations Manager (5.7.1) stopped making account CPU on one of the three hosts ESXi (5.1.0, 799733).  vSphere sees all data (CPU, Mem, network) of the ESX host and DRS works.  I have logs of the hosts on the migration server.  So, how do Ops Manager report correctly for this server?

  

  Thank you

  Brian...

  See #1 in my recommendation... vSphere could bring their stats, but you should check vCenter to see if vCenter is bringing.

• Cannot deploy Operations Manager vcenter

  Hello

  After we bought vSphere essentials 5 more we received a license for an Operations Manager Standard vCenter.

  After the order has been extracted, I downloaded the .ova

  Now I'm trying to deploy the .ova in the cluster, but I got two errors:

  the first, after I chose my cluster in the wizard, a popup said:

  error of the ovf package is not valid and cannot be deployed

  the other, after an another try to install said:

  Impossible to deploy descriptor of the FVO on cluster cluster because it contains a paralytic and the cluster is not in mode of DRS.

  We do not have the license for DTH (since we have essentially more) then why vmware offers us a software license, we can't use because of the other license restrictions?

  Is there a way to install this virtual machine? I tried ovftool with no luck

  Thank you

  I'm in exactly the same position.  I followed the procedure described in the KB 2013695 article that deals specifically with installing vCOps on Essentials Plus.

  I followed this article to deploy the EGGS and then lit the VM 2 (unemployment and analytics).  The web administration page is not accessible.  If I open a console for the virtual machine to the user interface, it displays an error:

  vCOps 5.0.0 build 554150 met one or more unrecoverable errors.

  Unable to get the identity of the virtual machine.  This indicates the ovf possible deployment directly on ESX.  Deploy the ovf of vCenter.

  The other VM (analytical) does not display an error.

  I had given a fixed IP address when deploying the OVF, but when virtual machines under tension, they had taken of DHCP addresses.  I reset the IP address, DNS and time zone on each virtual machine.

  Have you found a workaround?  The message indicates a response has been recorded, but I do not see.

  Thank you

  -Randy-

• 5 and update manager vCenter

  Hello

  I installed vcenter and update manager as a virtual machine host.

  Now when I want to use the update patch of the host Manager, it takes all the vm to stop.

  Obviosly if I stop the VM guests, this includes the vm vcenter himself who then stops updates.

  I tried to connect directly to the host without vcenter but then there is no Update Manager.

  Any way around this?

  Thank you

  Chris

  I would start by setting up the vmware in your main site environment - Essentials you are able to use the vmotion and HA - vmotion you will deal with the current issue - would you be able to vmotion virtual machines on a host and update without havomg yp sjut down virtual machines. With HA you will be covered in the event of hardware failure - if an ESXi host to crash the system VMs automatiically will restart on the remaining hosts.

  Bit please be aware vmotion and HA require shared storage - either SAN (iSCSI and storage FC0 or NAS/NFS -

• Installation of VMware Update Manager (vCenter 4) and authentication

  Hi all

  This should be fairly simple.  Can someone please confirm something for me?

  In VI3 when you install VUM and enter a u/p that is used for installation only.  Is this still the case with vSphere?  The installer says now... "Update Manager will need this information to connect to the Server vCenter at startup."   It is not clear, it's just for starting the installer or the start of VUM whenever the service starts?

  See you soon

  Dan

  It is only for the installation process.

  VUM service (such as other services) runs with the credentials of the SYSTEM.

  André

• Server Update Manager vCenter - host supports

  I am currently preparing our environment for the upgrade to vCenter Server v2.0.2 to Update3 V2.5

  Currently, we only have 3.0.1 and 3.0.2 hosts and I'm busy to patch the 3.0.1 hosts to satisfy the prerequisites for the upgrade of the vCenter server.

  My question is, Update Manager supports the correction of the old armed forces or is it only 3i and 3.5 hosts it supports.  I read it somewhere but can't seem to find a definitive answer anywhere

  Thanks in advance for any help you can give

  See you soon

  D.Misbehavis

  Hi Davis,.

  Take a look at the compatibility guides, you'll find this info.

  VC 2.5 U3 patches ESX 3.03, 3.5Ux and ESXi

  Have fun.

• Question about C60 multi-Site Management

  Dear Expert

  I have a question about C60 multi-Site call using C60 as host.

  It there is a choice of layout as Edge 95?

  My opinion of close end site is not in the page layout and I go through a document to the administrator, apparently not metion on selection of layout on several sites.

  C60 is capable of having a provision such as "4-split' 95 edge?

  Thank you

  Best regards

  Tung

  Current version of the software of C60 TC6.0:

  

  You can also make your own layouts using the TC Console:

  http://developer.Cisco.com/Web/Telepresence-developer/tools/integrators/TC-console

  /Jens

• Multi-site management

  I work on several Web sites in the bootstrap and trying to find information on how to do this without messing up a site.

  Thank you.

  You must configure a separate Dreamweaver site for each of your site depending on How to use the dialog box options Manage Sites in Dreamweaver