Multi-party staff (PMP) operating instructions?

Similar Questions

• Multi-party sharing with VCS

  Hi, looking for some clarification.

  Can I use the multiparty licensing shared if I have a VCS rather than CUCM for call control?

  The ordering guide indicates that it would cooperate with the VCS.

  http://www.Cisco.com/c/dam/en/us/solutions/collateral/collaboration/PERV...

  page 4 - notes: although Cisco UWL Pro applies only to the Cisco Unified Communications Manager based deployments, SMP can be used with Cisco Unified Communications Manager and Cisco telepresence video Communication Server (VCS).

  The CUCM deployment guide

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/con...

  said only CUCM, not VCS - page 99.

  thoughts?

  Multi-party sharing (SMP) licenses can be used with VCS, the licenses that are managed by the Chief and not CUCM, unlike multi-party staff (PMP).

• Cisco Jabber with Cisco multi-party Shared more Licenses

  Hello

  I'm looking for a Solution to video conference for approximately 4000 employees. Currently the customer uses Cisco's Jabber for video calls from point to point. The main requirement is Ad - Hoc videoconferencing by any employee at any time. I looked at both meeting of Cisco and Cisco TelePresence Server server. The two solution requires more or licenses more pluralistic multi-party Personal shared. The customer won't buy a PMP license for each user. Their requirement is multimedia resources shared so that any employee can initiate an ad hoc conference.

  Now the question is: can we use Cisco Jabber with multiparty licensing shared?

  Thank you

  Mockus S

  Yes, it is quite possible.

  The only singularity is with PMP + which applied slightly differently than the head of the Orchestra/vTS. This does not seem to match your use case since you intend to buy only SMP licenses +. From version 2.0 (1) CMS, PMP + licenses - which are less expensive than SMP + - use only if: a) the space belongs to a LDAP user with a PMP + license for which they are responsible; or (b) If a user LDAP with PMP + assigned to them joins the Cisco meeting App space as an authenticated user. In all other scenarios, including ad-hoc escalation with CUCM licensed SMP + is consumed. This is different from that of head of the Orchestra/vTS, which were also able to understand the right to the user for ad-hoc calls.

• Apple mail appears not multi-party digests

  Upgrade to Mac OS Sierra and now Apple Mail does not appear the contents of multi-party digestions. Has anyone else seen this and how to fix it?

  Hello Frederick-b,

  Thanks for this info and choosing the communities Support from Apple. I know how important being able to see the content of several parties digestions in Mail is for you. Based on what you said, it seems that you may want to change the settings of the conversations on the view menu, activation of the conversations or disabling, or expand or collapse the conversation in the list of messages.

  Discover conversations - help Mail

  See you soon!

• Just bought a Panasonic Viera TV and seeks to link to my mac.  The operating instructions do not help.  Any thoughts welcome

  Just bought a Panasonic Viera TV and seeks to link to my mac. The operating instructions do not help. Any thoughts welcome

  You have two ports thunderbolt on the end 2013 iMac, but not HDMI port. You will need a mini DisplayPort to HDMI adapterand a length of cable HDMI to your TV. If this TV is a model of 4K, then she might want more recent HDMI 4 K wiring (1. 4 (b) specification. You may be able to pick up this adapter to a local Apple or computer store.

  I have a length of HDMI cable connected to my TV (not a Panasonic) with the mini adapter DisplayPort to HDMI adapter connected to it. I turn on the TV and changing to that HDMI port, then turn on the Mac. My Mac screen is duplicated on television. According to what default settings are configured in your TV, you may need to modify the program to look a HDMI (normal, cinema, big screen, etc.) to taste. Start with the default setting.

• Replicator Port Sony VGP-PRS25 - operating instructions

  Where can I get operating instructions for a Sony VGP-PRS25 Port Replicator?

  dant23,

  I'm not sure of the manual, but it should in my previous post if you look in the manual for the unit, on what he described how dock/undock and a description of all the port which is here...

• What are multi-party systems

  I came across a question to ask about multi-party systems. What is

  http://www.Google.co.UK/search?q=multipartite

• How can I download lightroom 5 operating instructions

  How can I download lightroom 5 operating instructions

  Go to https://helpx.adobe.com/lightroom.html, the help online and on the right side under "Help and tutorials", there is a link "Lightroom 5 manual (PDF 4 MB)"

• Red Hat Enterprise Linux 5 operating instructions

  I only managed to get installed DAQmx and running RHEL 5 and I wanted to put the instructions here in the hopes that I could save someone else a large part of the time.

  First of all, I want to thank all who have contributed to the forums OR regarding the DAQmx Linux software installation. Most of the information contained in this how-to came directly from these two positions: Fedora Core 6 How-to and Fedora Core 5 - kernel 2.6.20 - 1.5 NATION howto

  A special thanks goes to ninevoltz, who took the time to understand apparently most of this stuff on and even pushed back the developers of the core on the limitation of length of symbol of modpost.

  Here are the steps I took when installing a PCIe-6259 on Red Hat Enterprise Linux 5, 2.6.18 - 53.1.19.el5 kernel:

  1. Add UTS_RELEASE to the version.h file
     • CD /lib/modules/2.6.18-53.1.19.el5/source/include/linux
     • CP version.h.dist version.h
     • Cat utsrelease.h version.h.dist > version.h
  2. Create a link to asm_offsets.h with an underscore in its name
     • CD /lib/modules/2.6.18-53.1.19.el5/source/include/asm
     • ln s asm - offsets.h asm_offsets.h
  3. Modify the application of modpost to accept names of symbol more of 500 characters
     • CD /lib/modules/2.6.18-53.1.19.el5/source/scripts/mod
     • CP modpost.c modpost.c.dist
     • Change the line 1116 '#define SZ 500' to '#define SZ 1024 "
     • CD /lib/modules/2.6.18-53.1.19.el5/source
     • do (Note: this will fail, but will get far enough to rebuild the modpost program.)
  4. Download ni.com NIDAQ800_RedHat.iso and install it
     • Mount-o loop/mnt NIDAQ800_RedHat.iso
     • CD/MNT
     • . / INSTALL
     • CD
     • umount/MNT
  5. Remove the packages OR rusted, installed by NIDAQ800_RedHat.iso
     • rpm - e - nodeps nipali Edward nipxirmi niorbi nidimi
  6. Download NI-VISA - 4.3.0.iso to ni.com and install it
     • Mount-o loop/mnt NI-VISA - 4.3.0.iso
     • CD/MNT
     • . / INSTALL
     • CD
     • umount/MNT
  7. Recompile the kernel modules OR
     • / usr/local/bin/updateNIDrivers
  8. reset

  This procedure worked great on my system, I was still able to run the application/usr/local/bin/DAQmxTestPanels successfully. I had read that others had to wrestle with some MesaLib to make it work.

  Yes, whoo hoo! And, good luck.

  Warren

  
  

• Operating instructions did not come with my wireless 2000 - need a

  I bought this wireless 2000 keyboard and hooked up but no instructions came with it.  Is it possible to get an or are there instructions on your website?

  This is me did not help.  I need instructions on how the new buttons in the upper part of the keyboard are for as well as the F keys with blue drawings (hard to see) on them and how to use them.  Web site, I was sent for were not not one of these information.

  So do your own research. Bing or Google. Or go to the manufacturer's Web site and ask.

• Operating instructions

  How can I get an instruction manual for my HP Photosmart 5520 All in One printer?

  Thank you!  "When all else fails, read the instructions," is a mantra that is hard to follow when you do not have the instructions. Now I have them and I was able to print a photo of stick of memory from my camera, and I'm a happy camper. Thanks again!

• 4500 printer all-in-one: no operating instructions

  I don't have an instruction manual for my printer. When I had last year I bought it in a store that was going out of business and bought the last of them to off the shelf. I have NEVER scanned before documents and would like step by step very simple instructions on how to do it. It is the first scanner I've ever had. So I need simple instructions. Any help or instruction of greatly apperciated.

  Thank you-

  Keeza01

  Usually scanning documents the independent scanner or All in one printer the method is very simple and even. Given your all - in a single 4500 printer, please follow the steps mentioned below:

  -Lift the cover of the printer.
  -Load the document that needs to be scanned.
  -Place the original face to print down on the corner front right of the scanner glass.
  -Close the lid and go to the scan button on the printer control panel. If you are able to find the scan button, press the same and follow on-screen instructions to scan your documents. If you are not able to find the scan button, continue with the steps below.
  -Go to start on your computer screen and right-click on an empty area of the screen.
  -Click on 'All the Apps' on the application toolbar, and then click the icon with the name of the printer.
  -In the printer software, click the icon 'Print & Scan'.
  -Select "search for a Document or a picture.
  -Select the type of analysis you want on the shortcut menu and click 'Scan '.
  -Select "Save" If you want to keep the application open for another scan, or select "Done" to exit the application.
  -Once the scan is saved, a Windows Explorer window opens in the directory where the analysis was saved.

  The following link may also be useful:
  http://h10032.www1.HP.com/CTG/manual/c03784120

• Operating instructions for Hewlett Packard OJJ4500 washer version 10

  Where can I find Instructions for use of Hewlett Packard OJJ4500 washer version 10

  Hello

  Please, try the following steps and let me know what happens:

  1. Open Control Panel > Add / Remove programs.
  2. Locate Flash from Adobe / Macromedia Flash, select it and click on uninstall.
  3. Install the latest version of Flash by using Internet Explorer (a different browser can only install a plugin for the browser) here
  4. Insert the installation CD. Close the installation windows.
  5. Open my computer, right click on the driver CD, and then click Browse.
  6. Enter in the installation folder.
  7. Enter the folder of SolutionCenter.
  8. Right-click SolutionCenter.msi (can be identified by its other icon) and choose repair. Aprove that any error or prompt until Setup is complete dialog box.
  9. Restart the computer and try running the Solution Center once again.

  Kind regards

  Shlomi

• HP Envy 17 t: HP Envy 17 t - operating instructions?

  Hello

  I just bought a HP Envy 17 t w / 10 Windows.  I was told there is the website where I can download a full version of manual operation. I can't find it. Anyone have the web address?

  Hello:

  Here is the link to the guides section user for your laptop HP ENVY - 17 t notebook - k200 CTO:

  http://support.HP.com/us-en/product/HP-envy-17-K200-notebook-PC-series/7527536/model/7757409/manuals

• Multi-stations for cloning operations

  Hi all
  I hope everyone is in good spirits.
  This issue is very common, but I had searched a lot and did not have anything even to even as directed by my trust scenario.
  I had to do multi cloning a single node to node.
  
  32-bit linux OS
  Structure of primary database (server1): -.
  ORACLE_HOME - /Orabase
  Data files - /Mdt1
  Data files - /Mdt2
  
  Primary application (Server 2) structure: -.
  Complete file - /Appbase
  
  Now I had to do the cloning on server n ° 3 , but it has only a single point mounting IE /Dbsvr
  
  I know that after primary steps i.e running preclone, copy etc. it will be no problem in the application of cloning, but what to do for cloning the database as my data files are in two different mount points. Do I have to make a new folder on the clone database and will copy all the files of data in these two mount points or something else.

  Richa says:
  Thank you, Hussein.
  But the confusion is do I do two new files in the database folder or a single folder to apps_st/db/data and paste all the data files here.

  The two might work, it's up to you if you have 1 directory or 2 directories (or more) on the target node.

  Thank you
  Hussein