Replicator Port Sony VGP-PRS25 - operating instructions

Similar Questions

• Just bought a Panasonic Viera TV and seeks to link to my mac.  The operating instructions do not help.  Any thoughts welcome

  Just bought a Panasonic Viera TV and seeks to link to my mac. The operating instructions do not help. Any thoughts welcome

  You have two ports thunderbolt on the end 2013 iMac, but not HDMI port. You will need a mini DisplayPort to HDMI adapterand a length of cable HDMI to your TV. If this TV is a model of 4K, then she might want more recent HDMI 4 K wiring (1. 4 (b) specification. You may be able to pick up this adapter to a local Apple or computer store.

  I have a length of HDMI cable connected to my TV (not a Panasonic) with the mini adapter DisplayPort to HDMI adapter connected to it. I turn on the TV and changing to that HDMI port, then turn on the Mac. My Mac screen is duplicated on television. According to what default settings are configured in your TV, you may need to modify the program to look a HDMI (normal, cinema, big screen, etc.) to taste. Start with the default setting.

• Replicator port or docking station for Satellite L20

  Hello
  Can someone tell me if a Replicator port or docking station, there are satellite pro L20 model?
  I searched around, and every time I check the specifications of compatibility, it is usually a Toshiba laptop or 2 and often some of the satellites 'L' series, but no mention of the L20.

  Thanks for any help you can give.

  Hello

  I agree with Akuma.
  You may not use a dock under Satellite L20.
  If you take a glance at the bottom of the device, you will not find a necessary home slot that would be needed to connect the docking station.

  But of course you can use some sort of port connected to the USB port replicator.

  See you soon

• My computer laptop sony vaio says operating system not found at boot

  My computer laptop sony vaio says operating system not found at boot.

  Hello

  What is the model # computer? Check the following link to locate the model #:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

  Y at - it any hardware or software changes?

  Remove all devices, dock and removable media connected to the computer and try the following steps to resolve the problem:

  1. Check if the hard drive is listed in the BIOS. Restart the computer > key 'F2 '.
  
  
  2. For Windows 8, shut DOWN the computer > press Assist key > key press F2 to access the BIOS.
  
  
  3. If the hard drive is not listed, the problem may be related with the material. Reset the BIOS once.
  
  
  4. Use the arrow keys on the keyboard to find the "Exit" button and select an option "Load optimized or default values", save the settings and exit the BIOS.
  
  
  5. Then check if you are able to start the operating system.
  
  
  6. In the case, if the problem persists, it may be related with the material.
  
  
  7. If the hard disk is listed, follow the procedure described on the link: https://us.en.kb.sony.com/app/answers/detail/a_id/30721/c/65, 66/kw/Error%20Operating%20system%20not%...
  
  
  8. In case, if the problem persists, contact the Sony service team: http://esupport.sony.com/US/p/service.pl

  If my post answered your question, please mark it as an "accepted Solution".

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• How can I download lightroom 5 operating instructions

  How can I download lightroom 5 operating instructions

  Go to https://helpx.adobe.com/lightroom.html, the help online and on the right side under "Help and tutorials", there is a link "Lightroom 5 manual (PDF 4 MB)"

• Sony VGP-MCA20 memory card adapter

  Hello
  I have laptop SONY VAIO VGN-FE790G. After installing WINDOWS 7 memory card adapter will work fine with SD card 512 MB, but does not support 4 GB and more. How can I solve this problem? Are there any specific driver?
  Tanks.

  Thank you for your post and welcome to the forum.

  The VGP-MCA20 ExpressCard adapter was initially published just before that the SDHC specification cards were released and 4 GB cards was available - so it'll be a material limitation due to the age of the adapter that is causing the problem. He was reading the 4 gb card before the upgrade of the operating system?

• Sony Vaio in operating system not found?

  I have a laptop Sony Vaio, model SVE14AJ16L number and I got a new drive hard since the hold had ceased to function. I didn't need all the files on the old drive, so I just jumped out. I installed the new drive, but then did not work the Assist button. I googled this and I couldn't find a solution. I need to install Vaio care, but cannot find the Vaio care for my model number. I needed to install Windows 8, but for some reason it wouldn't detect the DVD or USB. I made the USB drive bootable using rufus and I downloaded an ISO and intended to put the serial number on the bottom of my laptop. It looks like all that operating system not found. I can't go into the BIOS, because that's what the assist button, and it does not detect. The towers of DVD and USB activity led blinked his eyes, but nothing. I don't know what is happening. Even when I took out the hard drive and put in the DVD/USB, it seems still operating system not found. I can't find the model number on this site.

  TL; DR
  Installed a new drive, HELP does not, does not detect a bootable USB/DVD, appears only as an operating system not found. I made bootable USB/DVD and tested on other computers.

  Please help, thanks.

  Basically, I don't have your system to test, so I'm just guiding you the general procedures.

  First of all, FORGET the ASSIST button. To explain the question "why?" would take a lot of time and goals here is to install new windows in your new drive.

  Secondly, I highly recommend you have all the necessary drivers for your equipment before your proceed with the windows installation 8 or 8.1. I own VPCSB28GG and Windows 8.1, several functions DO not work properly as it does in Windows 7. So, unless you have a deep knowledge on the computer, do not go for windows 8.1 yet or at least try to install windows 8.1 on a different drive for a test run.

  Thirdly, I strongly recommend allows you to install Windows 7 USB stick / 8 / 8.1 since the DVD player is not a reliable source from USB. Microsoft also provides tools to help people installing Windows 7 / USB 8.x. Please google it.

  As the symptoms that you have described, I recommend the steps as follows:

  1. go in the BIOS / settings (by pressing F2 during POST) UEFI. Under start options, your system may use a different name, but in principle it is similar to this: '1 ST Boot Device' "2nd Boot Device" "3rd Boot Device"... and so on. The value '1 ST Boot Device' your desire, such as CD-ROM bootable media, DVD-ROM, external USB/HDD. In my case, it is an external device because I use USB boot Windows 7 / 8.x installation. The "2nd Boot Device" in the HARD drive internal value. Drive HARD internal is your disk newly installed (or current).

  2. run the windows installation wizard. During the installation of Windows, your computer may restart several times. However, AFTER THE FIRST USE, you must go to the BIOS / UEFI with once again. The value '1 ST Boot Device' internal HARD drive. If you forget this step, you will encounter a loop of Windows installation. So, I suggest to pay attention pls. After that Windows Setup is complete, you can install drivers for your system. Find it in Support to the Sony Web site. You will need to download the Windows 7 drivers for Windows 8 as Intel Management Engine, components Sony blah blah blah. Please keep in mind, Vaio Care cannot make you suggest.

  3. in the installation of Windows, you won't find your HARD drive to destination of installation. In this case, go to the BIOS / UEFI setting, replace your SATA AHCI by compatible IDE or SATA port configuration. You can later change back to AHCI AFTER installing your SATA driver.

• Firefox does not paint the window if Windows 7 Basic theme is enabled and Replicator port USB Fujitsu PR07 is used

  If I use the "Windows 7 Basic" theme on my laptop (Fujitsu Lifebook A532), the Firefox window is not painted.
  I see only the edge of the window, the content is not. As soon as I switch back to the theme of "Windows 7."
  It works again.
  It could be related to the graphics (from Intel) driver of my new laptop.
  Before I had a desktop computer and not had this problem.

  Update: the problem only happens if I use my port replicator (Fujitsu USB Port Replicator PR07).
  If I unplug the Replicator and only use my laptop, any computer screen is fine.

  Install the latest drivers solved the problem

• EliteBook 840 G2: Elitebook 840 G2 + Replicator port 3005pr not charging

  I had a 3005pr for the Elitebook port replicator.

  I am conecting to USB with the small thuntherbolt in there (the one nearest the port vga on the left side) power connected to the port replicator, and everything is fine (screen, keyboard, network, audio...), but laptop will not load.

  I thought it was supposed to recharge thought USB, but not connected to the power icon shows under windows.

  .... I thought it was supposed to recharge thought USB, but not connected to the power icon shows under windows.

  Hello

  No, you must connect laprop charger to recharge your laptop.

  Kind regards.

• Portege R930 - 1 d 0 + Replicator port dual monitor supported high speed II - taken

  Hello

  Crossing a Portege R930 - 1 d 0 high speed port replicatior II.
  Is it possible to dual-display output?

  Thank you

  You hear the internal + external display by the dual display or you mean two external monitors?
  Speed Hi II port replicator supports the RGB port and display port and HDMI port but (display port and HDMI) can not be used simultaneously.

  You can use the internal s for computer laptop HDMI port and for example a the Hi speed port replicator II ports to connect an external monitor.

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

• Tecra A10 - BSOD with Port Replicator Port and external monitor

  Hello

  I have a Tecra A10 PTSB0A 05C023 with XP SP3 on an Express Port Replicator, running to an external monitor (1280 x 1024) on VGA. Works fine for a while then seems BSOD spontaneously when not in service - possibly when screensaver or powersaver comes into play.

  BSOD is a STOP 0x0000007E in igxpmp32.sys

  I downloaded and installed the latest video drivers intel from the Web from Toshiba - 6.14.10.4953 site

  Any help or advice by eliminating the BSOD would be greatly appreciated.

  Kind regards

  Rhys.

  Hi mate,

  I asked Google to igxpmp32.sys and this file belongs to the Intel display driver. In your case, I recommend the page Intel searching for the latest display drivers.
  [www.intel.com]

  Also have a look on the Toshiba site for a BIOS update, or you have already installed the latest version of the BIOS?

  In addition, it would be interesting to know what Port Replicator you use exactly. Can you post the model number?

• No sound on the Port Replicator port II (Tecra S11 - 12M)

  Hello! Because today, I have no sound on my sound from the Port Replicator II (PA3680E-1PRP) plug to run my external speakers. Instead, the internal speakers are running. On the laptop itself, making works well, only the port replicator appears to be dead.

  It has worked well over 10 months now without any complaint. I've seen a few similar cases in forums but no answer that could help me. I didn't lie all the drivers again.

  I work with WIN7/64-bit Service Pack 1.

  Anyone know how to fix?

  Thank you, christophe

  Hello

  Recommend to check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56460

  * Milo_Tweenie wrote: *.

  + Did not know that the audio 3.5 mm output jack is actually run by a USB hub in the duplicator. +
  + Concluded that the multimedia USB Audio Device was not installed driver for the audio port. Click the button to update the driver, it has found the driver automatically and now I have sound. +

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.