Multi-port USB update

Similar Questions

• Multi-port USB adapter for the MacBook USB - C Port?

  Hello

  I'm in pain, trying to find a USB adapter multi-port for my MacBook 2016, which only has a single port USB - C which is also like a power port.

  I already done is connect the WD My Passport drive external HARD to the MacBook via an adapter HooToo, that to see any HARD drive mounted in OS X.

  OS X makes a sound when it is connected, but apparently the adapter provides insufficient power for the HARD drive needs to be loaded.

  I got Belkin USB multi-port here:

  http://www.Apple.com/us/search/USB-ports?SEL=accessories & src = SERP

  But it is not certain if one of them provides enough power, so I would try rather than a person has used successfully with a MacBook and an external HARD drive,

  If not, opt for a multi-port adapter USB brand Apple.

  Please let me know about your experience or an Apple adapter.

  Thanks in advance

  My Apple 3 port works as advertised. The USB port has a perfect compatibility with the old and readers USB 3, my adapter Ethernet USB Apple and Trendnet USB adapter that I use in series. This includes the perfect function with a 10 VM Windows via VMware Fusion.

  A non - Apple C to an adapter that I bought works fine too. I don't see the brand on this subject but he chose via Amazon ratings. There were some with higher ratings, so that's how I made the choice.

• Serial com port USB displays error code 10

  When I did a check up on my computer (Windows 7 OS) this morning he said my serial port USB COM 3 would not start and had a code 10.  I went to the Device Manager and checked, and it says the same thing.  I clicked on update of drivers and it said that I had updated the drivers.  I plugged the USB things in the USB port and it worked fine.  I went to Device Manager and it still has the yellow mark with code 10.  How can I correct something that seems to work correctly?

  Thank you

  Shirley

  Hello

  1. did you restart the computer after uninstalling the USB device?

  I suggest to restart the computer and let Windows install the drivers automatically, or you can use the link below.

  Update drivers: recommended links

   

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this helps and keep us posted.

• Ports USB 43 problem error code

  On a port USB is not recognized. Error code 43. I have four USB Port on the laptop. Three on the left and right and the other on the back. All have failed to recognize the devices. I tried in vain to run the programe "Fix it." Operating system is Windows 7 Ultimate

  Hi CosmosOmondi,

  What is the number and the model of your laptop?

  Windows has stopped this device because it has reported problems. (Code 43)

  Method 1: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and windows will automatically reinstall all USB controllers.

  
  Method 2: the motherboard\chipset to the latest driver update.

  Note: Please check with the manufacturer of motherboard\computer before you install the driver.

  Method 3: You can see the steps mentioned in the link below

  Tips-for-solving-problems-with-USB-devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  (Article applies to Windows Vista, not valid for Windows 7)

  Method 4: You can view the documentation for the hardware for more information about diagnosing the problem.

• need a HDMI cable to connect to the macbook pro via port USB - C

  Could someone please indicate what cable or adapter I need to run my MacBook Pro to a TV movies? It connects on the port of lightning or another? Thank you Jude.

  No MacBook Pro has lightning ports or ports USB - C.  Most have ports Thunderbolt, and some have even regular HDMI ports.

  The adapter you need to depend on the exact model of MacBook Pro you have.

  Until we can tell you what cable or adapter you need, you must tell us what model of MacBook Pro you have.

  You can watch in the Apple Menu-> about this Mac, option and after the year of model here.

  How to identify MacBook Pro - Apple Support models

• 700 - 330qe envy: activate the second ports USB 3.0 on motherboard Kaili

  I'm a 700-330qe and notice TWO USB 3.0 plugs blue on the motherboard of Kaili, but only one is in use that supports two ports USB 3.0 on the top of the computer case.

  Is it possible to activate the second USB 3.0 on the motherboard and add another cable longer 2 USB 3.0 ports on this computer?

  Thanks for any help,

  Chas Pearson

  Your request does not bother me, and I hope everyone.  DUH isn't stupid, I know where he is.

• HP Pavilion: Before port USB on HP desktop computer has stopped working

  My HP desktop computer is about 2 years old and has two USB ports on the front and a number on the back. I had no problem with any of the ports until I used a USB in the port now broken and caused a power outage that now this port doesn't recognize any USB device.  It says "USB device not recognized.  The last USB device you connected to this computer worked badly and Windows does not recognize. »

  I tried to uninstall and reinstall the USB ports on the Device Manager and have lived all the suggestions on the HP support site and the Microsoft support site. The defective USB key must have caused damage to the track. I hope you can suggest something that I can do to get it working again.

  Hello

  The only port on the front is damaged. The USB key must have damaged only this USB port. I'd like to reuse this memory bar.

  You need to replace the USB module, two ports USB 3.0 of housing as the two front ports use the same module and connections to the motherboard.

  You will probably need to go to HP for the part.

  You should be able to get access to the component by removing the front bezel. Remove the side panel also. You should see the connection of the cable and add him the USB 3.0 connector front on the motherboard.

  Jay

• Need new ports USB for Satellite Pro L450D

  Hello

  I ve tried to keep new ports usb for my Toshiba Satellite Pro L450D I ve called Toshiba and they said I have to put it in for repair, but the thing is - it's not is no longer in warranty so that I can t make and send to Toshiba for repair.

  for me would cost loads I ve asked Toshiba provide me for my laptop usb ports, but they won t so I would like to know where I can get these parts as one of my ports usb don t work because of my daughter in the first place to break them and the entire interior of the usb ports is broken.

  Help, please
  Thank you

  Hello

  At first, I must say that Toshiba service doesn t sell these small parts such as USB ports. USB ports are soldered to the motherboard.
  Where to get the new USB ports? Good question.

  I don t know where you MFL, but perhaps you should I use Google in your country and check if you can find some independent repairer for laptop and ask for help.
  I fear it won't be so easy to find new ports of m.

  What you can try is to buy defective mainboard in the hope of USB ports are OK and are trying to replace them.

• Where are the Ports USB 3.0 of my HP Pavilion dv6-6158nr Notebook?

  I am unable to find the Ports of USB 3.0 on my HP Pavilion dv6-6158nr laptop.

  Please tell which side are these ports and how to get the maximum speed out of them?

  Hi Hanazir,

  You'll love this.

  Get a bright light and shine on the left side of the laptop.

  Now, get a magnifying glass and look carefully next to the USB ports.

  3.0 ports are marked with the logo 'SuperSpeed '. "SS".

  Similar to this, but very, very small!

  

  To get the maximum speed, use only with devices usb 3.0 - external hard drives, USB sticks, etc done to run with this technology.

  There is no harm in using the USB3 ports with usb devices 2.  In most cases, USB 2 devices work as expected when connected to a USB 3 port.  There are rare cases where the USB 2 device may not work when it is attached to a port USB 3.  Before you accuse the laptop / desktop or even the port and if your laptop don't not have a USB 2 port, then consider to plug a USB 3 hub that supports one or more USB 2 ports and try that.  A few specialized 2 USB devices require USB 2 connection - deal with it.

  Dragon tips

  USB 3 external drives: offset connection, more or less depending on your hub, your hardware and your player can add up to an unacceptable delay when you use a USB 3 hub in conjunction with port USB 3.  Huh?  Unless absolutely necessary, do not use a USB hub 3 with an external drive USB 3 - connect the USB 3 drive directly to your 3 USB port on the computer.

  Other usb devices 3 work well on the SIIG 7port USB 3.0 / 2.0 Hub - this is a very nice quality, IMO and is supported by its own power supply.  Nice.

  It's my pleasure to help.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  When the answer is a good fix or workaround, click accept as Solution !

  Although I strive to reflect best practices of HP, I do not work for HP.

• Ports USB 3.0 on Satellite L755-1LM

  Hello

  I have a 2 years Satellite L755-1LM. The leaflet said that he might have a USB 3.0 port, which was an option on some models.

  Is there an easy way to know if my model for this? I learned that USB 3.0 ports have a blue insert rather than black, but I don't know if this is true in all cases (mine is black). I am attaching a standard HDD USB 3.0 on the left USB port, which could be 3.0, but the transfer rate is poor. Therefore, it is either 2.0 only or I'm missing drivers etc.

  Any thoughts?

  Hello

  According to specification of your machine specifications has ports USB 2.0 only. The difference is that only one port on the left side support option sleep and fresh.

• HP SlimLine 450 - A24: Add an expansion card 4 ports USB 3.0 PCIe to a HP 450 - A24

  Hi, new to the forum.

  I have a HP Slimline 450 - A24 and would like to know if it is possible to install a port 4 USB 3.0 PCIe expansion card?  All I could find is that the expansion port was used. Is it possible to add even 4 port USB 3.0 PCIe expansion card?

  Thanks fror your help

  Hi @gulwing1,

  That the Forums are with you! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are looking for more information on your system and whether it is possible to put a 4-port USB 3.0 PCIe card. I'm happy to give you a helping hand with this.

  Looking at the HP Slimline 450 - a24 Desktop PC product specificationsand HP and Compaq Desktop PCs - specifications (P-nutmeg nuts) of the motherboard, System Board lists no matter what expansion slot at all.  With this in mind, you cannot use a PCIe card in this system.

  It is unfortunately not the news you wanted, but answering your question. Please mark this message as a solution. Bravo would be appreciated as well.

  .

• Mac Pro 3.1 dual port USB 3 pci-e card does not work on 10.8

  I have an inateck Dual Port USB 3.0 PCI-E card (KTU3FR - 2 p) which worked well when my Mac Pro 3.1 operated in the OS10.6.8, but after upgrade to OS 10.8.5, the map is no longer operational.   It can be seen as a device, but the description of the material says that he doesn't have a driver.  Inateck said it's Apple area, and "because of the new strategy of the Apple driver there is also no external support pilot in this case.  Can I do other than throw the card?

  THX

  Rob

  If inateck doesn't have drivers for OSX 10.8, and 3 Apple USB drivers do not work, then you are out of luck

• HP Pavilion P6 - 2320t: USB update

  Is it possible to move some of my ports USB 2.0 to 3.0 on my p6 desktop? If so, what parts do I need?

  Hello

  You cannot switch to the 3 USB ports USB 2 ports.  You should be able to add a PCI-E which is put into service with 3 USB ports.

  The USB card 3 PCI-E x 1 of Startech PCI - E version 2should work.  Need you also aSATA Y-cablefetching of the SATA power cable. This card is assessed for W7 and W8.  Check with the manufacturer for the W10 support.

  Thanks for posting on the forum.

• Sub c multi port vga adapter can not fit in the hold of the Mac book pro computer

  Sub c multi port vga adapter can not fit in the hold of the Mac book pro computer

  None of the MacBook Pros have any type of VGA port.

  What MacBook Pro you have?

• Pavilion dv5 2048la: not working touchpad (keyboard/mouse) and port usb but turns on properly

  I started to clear some files in the main C: files then the touchpad did not find the (ordrivers of controllers) and I used a usb mouse. But now this does not work since the only time where that I turned off the computer and then when I turned it on it has stopped working also. Even if I have to do something more professional, I would like the answers. Also CD rom does not work a long time ago. Help, please

  Alex-Simball

  Hello;
  
  Let me welcome you on the HP forums!
  
  I hate to be the bearer of bad news, but you are in a really difficult situation that's going to be almost impossible to fix.

  First, there are the ways, if you have the Windows installation media, to repair missing system files - but you probably don't have that, and even if you did, your optical drive would have to work in order to be able to read the media.

  Second, you may want to restore your PC to its original state using HP recovery media, but there are two problems with this: (1) HP stores not more to your PC and your optical drive would need to work in order to use it (2) is a set of a DVD and a CD.

  To restore your PC to the operating status, you'll need to be able to start using Windows disc media.  One way that COULD work is if you use an external DVD/CD drive plugged into a port USB - but for this to work, your PC must be bootable (1) and (2) be able to boot from USB.  IF these two are not true, then you can not restore it - the way it is.

  Here are a few troubleshooting steps when your PC won't start - you can try them and see if everything works: computer won't start (Windows 7, Vista, XP) | HP® customer support

  Maybe something in this package of measures will work.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.