multi-site wireless network

Similar Questions

• Printer wireless HP 7510 goes - 4 station XP wireless network, w / 1 connected PC.

  Printer: HP 7510

  Network: multi-user wireless through the DLink DI-632 (a PC connected to the router)

  Address configuration: printer uses static IP - DHCP (192.168.15.240) outside

  The printer config: each computer has static IP set in the Control Panel app, using the IP address.

  Operating system: XP (Service Pack 3)

  Other devices: Ipad, Xoom and Kindle Fire (work all use ePrint)

  Protocol of network security: WEP (we are out of the country)

  Network configuration: main router, as well as 2 (wired) access ports; currently using channels 1, 5 and 11 (again, we are in the country and have little competition for channels)

  File Sharing: All machines on a network have a player to 'share' open, accessible with passwork.

  Scenario: Wireless computers seem to stay connected for several days to a week at a time. (Restart us every week, just like a POS)

  Computer that is connected to the network loses communication with the printer a couple of times a day and needs to be rebooted in order to re-establish the connection.

  When this happens, other machines continue to print and scan, without any problem and the wired machine continues to have its name displayed in the SCAN on the printer control panel - but the printer won't talk to her.   All network functions, including internet and intranet access to SAP of the printer is always available.  I noticed that if I go in checking ink levels, however, that the ink control software behaves differently.

  Normally in the application of the ink status, there is a small icon of 'work' with 6 points. When this computer is connected properly, it will start to jump around the circle, showing activity, get 41% and then view ink status info.  When connecting the printer and the computer does not work, the icon of 'work' will go to a few percent, then go to the information page printer, showing the brand, model, serial number, etc. level firmware.

  In all cases to date, reboot (without any other action) brings the connection of the printer and the computer to life - until the next time.  I will try to find any other model of this behavior, just cannot identify it again.

  I started with the installation of regular vanilla, but then all the computers on the network would always connections, about every 45 minutes. Using the info on this forum, I eliminated the dropouts for these printers and got static IP solutions (we did this anyway for the years with net lending machines).  It's the last machine which "falls" it seems that some piece of software that are required HP is 'stall' or began to hurt, but I can't see a model, same check and note the different software used locally on the computer and various Web sites visited. So far, no reason.

  I hope the guru of the HP with access to the source for the software status "supply of ink" can take a look at what is happening and why always go to 41% and then view the status of the ink (when connected) and then just stop a few percent and view the status of ink (when it is not connected).

  Thank you, in advance,

  Jim

  Don't know if this can help, some of the information could be relevant:

  http://support.HP.com/us-en/document/c03149924

• Try to install the adapter wireless network on s5503w

  Can need help, someone tell me the solution for my problem on the Pavilion Slimline s5503w wireless network adapter?

  It has an operating system of windows 7, works in 64-bit, 3 GB of RAM, proc AMD140 to 2700 mhz. Have you tried three different suppliers of network adapters wireless Rosewill RNX-N180PCe pci Express 1, TP-Link TL WN781ND pci express 1

  and now finally, Netgear WG111v3. I just want to get the wireless desktop. I have a wireless G of Linksys WRT54G Router, D-Link print server currently works wireless. I have Zone Alarm Firewall and Avira AntiVir Personal Antivirus.

  Yes, windows update is turned on and it's all good. The problem is once the driver software is loaded, then the hardware is installed. Windows never displays the wireless network adapter on any able to pick up a wireless transmitters. The error I get is: an unexpected error has occurred.   Seek to deepen, I read that he was saying that Windows could not set the IP address.

  This would indicate that my software driver wireless network adapter did not work. Yes, I have installed internet access and it indicated on the Internet site, that the cd was the most recent driver so no additional download was necessary, use the cd to install the driver. In addition, went to the Windows 7 compatibility page and the netgear WG 111v3 that my current card is authorized for 64 bit. So, where should I go from here? Oh, yes the s5503w recognizes the hardware in the device mgr. He sees the driver software, it's like something is blocking the final stages of obtaining information IP/MAC of the wireless network adapter.

  Hello:

  I would say that there is a problem with the 3rd party firewall.

  I had the same network Netgear USB v2 card no less, and it works well with my setup of W7 64 bit on my HP PC.

  I recommend you uninstall or disable the ZoneAlarm firewall.

  W7 features of a firewall, your router WRT54G has a hardware firewall. I had one of those too, but moved to the E2000. I assume that your wireless network is secured in some way.  I think that this is your problem.

  Did you know that you can get a free antivirus/antispyware software from Microsoft that works just great?

  Here is the link:

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  I think that it would cause less problems with my installation of other free software system. I have yet to be disappointed.

  Paul

• Pavilion dv6 wireless network card drivers?

  I just finished reinstalling a new windows 7 64 bit on my laptop of uncles engaged. I reinstall the drivers and the only one missing is wireless network card driver. I run the scan on the HP site and it came not with all the drivers for the wireless adapter. It does not show that I have more drivers that need to be installed or updated. But still the wireless adapter does not work. I can't find the driver anywhere. Any help would be appreciated. It is a HP Pavilion dv6 laptop.

  Hello:

  You're probably not following the instructions to find the hardware ID for the letter.

  Here is the link for the driver, you need to map wireless in this model.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5060880 & prodNameId = 5060882 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-105197-1

  I could find on the website of HP parts surfer and enter a product number for this model.

  Last listed item.

  http://PartSurfer.HP.com/search.aspx?SearchText=A6Y56UA

• HP laptop model g080nr: f12 button wireless stay orange won' find the wireless network

  After a update HP laptop does not connect to my wireless home button stay orange and I can't find my owner's manual to see what buttons to push with f12 to activate WiFi again, any help would be appreicated.

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you're not able to connect to the network wirelessly with your laptop

  Please read the tips and the steps below, find out what is relevant to your current situation and try

  by performing a few steps which could help solve the question

  1. check that the led wireless, try to turn on the wireless by pressing the wireless button

  2. check if Wireless [WLAN] is enabled in the BIOS

  3. check if you have yellow "!" mark or red ' x' for Wireless Adapter in Device Manager

  Note: make a right click on the adapter, uninstall the driver and restart the device [Windows will load the drivers again]

  4. check the last time wireless worked fine and perform system restore, reset the BIOS default setup

  pressing the F10 key in BIOS

  5. power OFF the Unit, remove the AC adapter / CC & battery, press and hold the Power button for 1 minute

  6. you can also download and install the last update of the BIOS for the unit on the Site of HP Support

  7 uninstall drivers Wireless Device Manager again, and this time download and re-install the drivers of

  the HP's Support Site

  8. If you use HP Wireless Assistant on your device, please uninstall the same and re-install again

  9. check if your wireless card detects any other nearby wireless network it, in this case delete existing wireless

  Profile and recreate the same

  10 incase if these steps does not resolve the problem, you can try removing and reinstalling the card group wireless

  Note: Please do this step only if you are comfortable doing

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Satellite P300 and Win7 - cannot see wireless networks

  Hello

  I have Toshiba Satellite with Win7x64 and I bought on eBay an AR5008.

  If I boot Linux I can connect to wireless networks.
  However if I boot in win7 that I can't even see wireless networks. If I run diagnostics I get the radio is turned off.
  Even with ConfigFree I get the same message, even if the switch on the front of the laptop is on.

  What can I do? I tried all the drivers!

  Hello

  Normally, you can enable or disable the WLAN connectivity by using the equipment and the FN + F8 key combination switch.
  Did you check that?

  I guess for the FN + F8 key combination you need value-added package. You can download it on the Toshiba site.

  Last but not least, works WLAN with preinstalled OS from Toshiba?

• Satellite L500-13z - Windows 7 does not recognize wireless network adapter

  Hello

  The Windows 7 RC Device Manager does not recognize my wireless network adapter (for example: Atheros, Intel or Realtek). I tried to install all the Toshiba support drivers, but none of them work:

  After installation, they ask me to connect the unit to my computer (of course it is still on the motherboard!).

  =>, Is there a way to know what is my Wifi adapter?

  that one failed: http://aps2.toshiba-tro.de/kb0/HTD7201PO000SR01.htm (this is the only Word to say "network adapter" with a yellow exclamation point).

  -Online someone knows when will be released Windows 7 drivers on the website?

  Hello

  Before you begin to install all drivers WLAN you can find on the Toshiba site you must make sure that wireless network card, you have exactly. You can check in the Device Manager-online properties-online Details of the local network adapter device.
  Need you an information like PCI\VEN_XXXX & DEV_XXXX

  If you have based this information you are looking for with these terms on this site in order to determine the exact WLAN card:
  http://www.PCIDatabase.com/

  After that, you can download the driver appropriate for your laptop. Before installing, you must uninstall all other versions and restart the laptop.
  Also, make sure that the WIFI is enabled with the hardware switch and FN + F8.

  Welcome them

• Satellite A30 - what wireless network cards are supported?

  Have a computer Satellite A30 laptop-404, I wonder what kind of card Mini-PCI Wireless would be compatible with my PC?

  Found this one for example.

  Gigabyte GN-WI01GS MINI PCI ADAPT 802. 11B / G BASE of RALINK CHIP SNM

  Anyone who knows what other types could be used?

  Hello

  Hmm, well I've never heard of Gigabyte WLAN cards and I don't know laptops that are equipped with these cards.

  I checked Toshiba Web site and some Satellite A30 models shipped with a card Atheros and Intel WLAN. So, I recommend buying a those manufactures wireless network card.
  For example Wireless LAN Mini PCI card (2, 4 GHz, 802 11 b) PA3212U-3MPC should be compatible.

  Good bye

• Tecra 8200 - no finding wireless networks?

  Hi all, a n

  Symptoms are as follows,

  (1) Tecra 8200 with a detected Toshiba Wireless Mini Pci Card
  (2) a belkin 54 g wireless router
  (3) a belkin 54 g wireless bridge
  (4) a portable detached with a map of pcmi belkin 54 g

  to try to find wireless networks it does not find

  If I put the card of pcmi belkin in lappy everything works fine

  OS: winxp sp2

  all drivers are in the form of windows found installed n such that it is impossible to find any XP wlan readers n utils on the support site

  I see not all ideas

  any aid must be good help

  Hello

  First that I want to mention that this device is not supported for Windows XP Home edition and it is reason why you can't find driver Wireless Windows XP Home edition for this device. Please check the BIOS settings. You will find an option called device configuration. Switch to the installer of the OS.

  Do you use client or windows for configuring wireless settings?

• Re: Satellite C660 - 29G does not detect wireless networks

  Hello.

  I own a SATELLITE C660 - 29 G PSC1LE, bought in Spain.

  Once shaped my development pc, I installed Windosws 7 64-bit.

  As I lost the DVD attached to the purchase of the laptop, I have downloaded all the drivers for my model based on the Toshiba site

  I installed all the drivers and the thing is that the wireless card is most recognized. I can´t see WiFi available.

  I connect to the laptop with a cable to get access to the internet and it works properly.

  Could you please help me?
  Thank you.

  You can first test what is the status of the WLAN card in Device Manager?
  Wireless network adapter installed and registered correctly?

  If yes do not forget the wireless network card is enabled.
  Please check and post comments.

• Satellite L300-2This - wireless network adapter is not listed in Device Manager

  PL. seated me in solving the WIFI issue in my newly purchased Toshiba Satellite L300-2This (PSLBGE 020004AR)

  1. me confirm - this model is equipped with WIFI as shown in the Web of Toshiba site but my device manager it is not displayed at all. (using Windows XP)-its only display Realteck LAN

  2. I installed the drivers from the site web of Toshiba - but always hardware WIFI not be picked up by any driver. Device Manager showing that a single 'Ethernet LAN' not installed-may be it is the WIFI card but once again on three pilots (real teak/intel/Ac..). which is the right selection computer-based laptop model No.? as none does not detect the hardware.

  3. confirm me - this model is NOT - equipped also BluTooth?

  Appreciate the quick response in this regard.

  Violaine Asim

  Hi mate,

  Just a simple question: have you activated the wireless network adapter using the hardware on the computer switch portable and key combination FN + F8?

  Satellite L300 is permanently equipped with wireless network card because a friend of mine had the same specifications.

  However, you should try to update the WLAN driver. Check the download page of the Toshiba driver for an update.

  Welcome them

• Sat Pro M30: Can't see the wireless network.

  In my work, we have the wireless network. When I search the network I don't see. the wireless signal is strong.my laptop Satellite Pro M30's.

  Could you please have the solution or know what the problem is.

  Hello

  Have you used the Atheros WLan or Intel WLan card?
  As far as I know if you unit has an Atheros WLan card you should always use the Atheros Client Utility to connect to some networks.
  In this case, the option use Windows to configure my wireless network must be disabled. If you the Intel card this option must be checked.

  Please visit this site and points.
  http://www.laptop.uwaterloo.ca/help/users_wireless_troubleshoot_list.html

  Good luck

  Good bye

• Wireless network connection drops on my Tecra A4

  Hello
  When I upload a file (or just only connected to the web), the connection drops about 30 seconds for a few seconds. I tried many things, like change the channel, change security settings (wpa/wep), tried other places in the House, but if I sit only one metre from the router, I have the same problem.
  The strange thing is the computer which is directly connected by cable to the router shows no problem at all...

  See also http://www.sappa.nl/dumeter.jpg for an illustration of the problem.

  I read about a possible solution (http://arstechnica.com/news/posts/1080251780.html), by closing the windows net zero service and instead of this service to use a different program to search for and connect to your network (configfree?)

  I use a netgear WPN824 router
  My laptop is a Tecra A4

  Greetings!

  Hello

  It's not easy to give you a proper answer.
  If your device works with the Atheros WLan card, you must use the Atheros Client Utility to configure WLan settings and the option to use Windows to configure my wireless in the wireless network properties must be disabled.
  In addition, please check from Toshiba Web site for the new Wlan driver. Maybe the new update could solve the problem.

  Good bye

• On V6302AU (V6000 Series) wireless network adapter

  I had no problem with my front wireless (and run wireless of my sister is not the network).  Now, when I turn on my computer the wireless signal turns blue and the icon says he's working.  However, my computer does not recognize all wireless networks.  The Windows Network Diagnostics indicates that the computer has an installed and configured wireless network adapter.  I've uninstalled and reinstalled the driver wireless lan broadcom for vista on the compact site, but that did not help.

  Can anyone help?

  Thank you

  TC

  I took my computer to my friends shop, sent it to HP and they replaced the part.  It took a few weeks and cost about NZ$ 80.  Problem solved.

  Take it to a professional!

  TC

• OfficeJet Pro 8625: HP8625 sleep mode/wireless network connectivity

  I recently bought an OfficeJet Pro 8625 and it worked fine for a few days, with everyone in the House, being able to print wireless connection network (Verizon FIOS via an Airport base station).  However, now it won't keep (or restore) a Wi - Fi connection after going to sleep.

  I can get the printer to work, if I turn it works, then immediately print (but only one machine... If I need to print from two different computers, I have to restart again to use the second computer).

  This is the case for all computers in my house - using several OS X (El Capitan, Mavericks and Snow Leopard) and the other with Windows 10.  I tried the troubleshooting tips that I could locate, and the firmware is up to date.

  I should be able to send a document to the printer from anywhere in the House, from any computer, without walking to the printer and restart it first.  A network printer should be sprained able himself, reconnect to the wifi and print jobs sent to it, but mine doesn't.

  How can I solve this problem?

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work only on the 2.4 Ghz band.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit. Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 6 feet, independently of the other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Now last thing to do once everything above has been tried and you still have the same problem, completely uninstall and delete the printer and its software.

  Use http://www.iobit.com/en/advanceduninstaller.php and powerful Scan at the end.

  Now go back and reinstall the drivers and full software on the HP website.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.