Multi-state button in State at the beginning

Similar Questions

• The use of objects multi-state for the next stage of the course 9

  In my old clumsy e-Learning authoring tool, I could create a slide with several steps. You would click the button Next to display text and graphics.  When you get to the last step, the next step button disappears, so that you know that you have completed. How can I make this work with multi-state Cap 9 objects?  I created an object with 3 States multi-state. I created a button with an action go to Next State.  It is fine until you get to the last State.  If you click the button again, it starts again with the first State.

  Yes, I can create several buttons. But I really just want a button called next step which disappears after posting the last State.  The user would know that she had displayed all the steps.

  Any suggestions are welcome.  Thank you.

  Jeanne M

  Here is a sample script:

  

  This has been implemented for 6 States (for a container of text, the Normal State is an empty form).

  There are 2 user variables:

  • v_counter has a default value of 0
  • v_max is the number of States, you can replace it with the literal '6' or you need to

  The first decision "done" check if the counter reaches the maximum value (v_max). If this is the case all States should have been disclosed, and it should end the loop. That's why this decision will disable the button used to change States (SB_StateTrigger) and here also to change its status to an invisible state (AfterLoop). Upon return to the slide, the State will be back to Normal (visible), and simply activate the button again. You can replace this with a simple action to hide as well if you want.

  If the first decision is not true, there are still reports to be shown and the counter is incremented.

  All 6 other decisions are similar (I collapsed 2 of them): they will test the value of the counter and show the associated State. I used to state3 on a common standard. This makes it possible to use exactly the same advanced also action if the total number of States is less than 6. Simply change the value of v_max.

• Audio attached to the button "submit" plays at the beginning of the slide

  I created a text box with a "submit" button. When someone types in their response and clicks submit, text comments will appear and an audio excerpt explains the answer. I have attached the audio, the button submit, but when I go through the project that it plays as soon as the slide appears, not after the answer to the question. He does not appear in the timeline panel, but played when I go to the Audio tab of the submit button. As an aside, the audio on the success and failure of the feedback will be the same. Does make a difference? Should I attach audio to the legends of f/b?
  
  Any ideas on how to solve this problem?
  
  PS - the Captiv8er - you were so help kind it has everyone (me)! THX!

  Well, how about that? I am answering my own question...!

  With more tests, I found that if I join the audio for the legends of success or failure, she plays after the answer to the question. The audio was playing when the slide appeared first of all because I loose to the Submit button, which is visible from the beginning of the slide.

  Thank you, me! (Maybe I'm starting to find it?...)

• Module NI 9403 terminal State after the beginning of task

  Hi all

  We have some problems with a relay connected to the NI 9403 module card. There are probably a few Chin-ups correct definition outputs during the initialization of the 9403 (high logic out the relay).

  After feeding the 9403, no relay are activated, which is good. If the default value of the input terminal has no consequences.

  However, directly after the Start the task defining the outputs as 9403 (without writing again to real data), all relays are activated. This behavior is independent of the 'InvertLines' property and thus independent of the default logic level.

  My question: what happens with the terminal type (and the input impedance) during the market and directly after starting the task to DO? Does it change to a situation of three States? And he leaves the tri - state after writing the first data word?

  Can we resolve this problem by adding 4 k 7 pullup to the terminals?

  Thanks for the help!

  Martin

  Hello Martin,

  The best way to solve this problem is to use a pull-up resistance. Then, you can start the task unit and lines appear at the bottom. The lines have a nominal input of 50kOhm impedance. And not the 9403 does not work in a sort state.

  I hope that the resistance will solve your problem! I will close this topic at the moment, but if you find any problems or have any other questions, please keep posting on this subject.

  Best regards

  Jarmo Levo

  Technical sales engineer

  National Instruments

• version 8.0.2 of iOS on iPad Air, AutoPlay multi - State Object question

  Hello

  I'm having a problem in which some objects multi-state value auto-play and stop finally State do not play in the Adobe Content Viewer (version 32.1.0) iOS on iPad running iOS 8.0.2. On the desktop, I work in an updated version of InDesign CC. Oddly, some objects multi-state (in the same articles) do work: both are looped MSO, but change the DCL of non-working (which consist of a container empty like State 1 and describes the text (no States have applied effects) to State 2) to the loop does not solve the problem.

  I am at a total loss - I have tried to reconstruct the ASM, the reorganisation of States, change timer values, defining the DSO to loop, reverse order... but nothing works. There seems to be a question Content Viewer (version 32.1.0) iOS 8.0.2, IOS because WHO play as expected in the office and on iPad content viewer using earlier versions of the viewer of content on the version 8.0.2 of iOS and iOS 7.1.1 and iOS Content Viewer (version 32.1.0) running on iOS iOS 7.1.1.

  In addition, after reading a folio in Adobe Content Viewer (version 32.1.0) on an iPad to Air and return to the display of the library, the settings gear icon disappears also. Typing in the box where the icon should be always displays the menu. This does not happen on a Mini iPad.

  Any advice would be appreciated.

  It is a known issue that we will address with our statement on Monday.

  Neil

• Dynamic object multi-state buttons sometimes remain in hover state.

  I created a lot of buttons multi-state smart shape (Cap 9, not a responsive project). All the buttons perform the desired actions, but they sometimes remain in the rollover State even if the cursor is not over the button. The error seems to occur when you move the mouse quickly from one button to another without clicking. Is this a known issue? Does anyone have a solution or work around it? Thanks for any help!

  Kurt,

  Looks like you may have discovered a bug.  I suggest that you connect this issue with Adobe.  I don't have a miracle solution that I can offer.  I think you are right that the problem is caused by the speed with which you access objects. The browser detects the mouseover event but seems to be missing the mouseout/mouseouthandler() event that follows immediately after.

  This happens with other browsers?  You will find that it is just the IE who has this problem.

• Interactive buttons under multi-state objects?

  I have a multi-state object that changes state when a key is pressed. The object of several State is a superposition of the entire screen, showing additional information on the content of the button is. I have the set opacity so you can still see the buttons behind the object of several State. But you can also interact with buttons, even if the multi-state object is on the buttons. Is it possible to change this?

  If you can see, you can interact with them. If you want to block put a button them in each State and have to go to the url with navto://nul

• Animations, and multi-state object buttons

  Is it possible that I can have a button that works with animations, into a multi-state object?

  When buttons, that departure/return animations, convert into multi-state objects, buttons to lose functionality and I can't have their target in the menu animation.

  Use the edge or convert animations using in5 to overlays of web.

  Just to be clear... we are talking about DPS here, right? Not EPUB or publish online?

• Insertion of a button to close a multi state object

  Hi all

  Have worked for centuries trying to close a State multi, joyless object to a button.

  This is the process I followed, which I was hoping the consequences.

  I have create a block of text, which is then cut and copied into a broader framework. This image is then set to "worthy framework to content.

  This framework is also defined as a block of text scollable (Auto Detect, Hide bar, position to use the Document).

  This frame is then copied with the narrow graphic and I chose the 'convert selection to a multi-state object. I have ensured that graphic close don't overlay not the text box.

  State 2 then then made transparent and subject to State multi is set to "hidden so that triggered".

  I double clicked on the close image within the Group and converted into a button. The button is then attributed to go to State 2.

  Finally I fund a graph that is converted to a button that opens the 1 State of the multi state object.

  But it does not work. There seems to be a copy of the State multi object generated during the above process and this ensures that the State multi object does not disappear when you click the close button.

  I tried all kinds of ways to make this work, but without success.

  Makes me mad and would appreciate really no work about being posted here.

  Thank you very much

  H

  What text? The button?

  If so, don't convert it to a button. The buttons are still pixelated. Instead

  just leave as native work and draw a no fill/no frame run above it

  and convert that to a button.

• Buttons and objects multiple multi - State

  Hello

  I'm curious to know whether something is possible. Basically I have a multi-state (named quarterbacks) object that contains some images. You can browse through these pictures through a slide show of two buttons (previous state/next State) system. Inside State 2, I wanted to add a button that when you click on it, accesses another object multi-state (called text) and would then be the text (which is my 2nd State in the text). Normally I double employment with the State of object and add some text in the same multi-state object, but since this is a slide show, I would not want the next button to access the same image with text. Sorry if this is a little confusing. Any help on this would be great, thanks in advance!

  Josh

  You cannot control a MSO go in another.

  However, you can integrate a MSO in another State. Discover Bob

  App of DPS Bringhurst's advice for guidance. It is a free download on iTunes.

• Multi-state objects appear on the top

  I'm knee-deep in my first iPad/Digital edition design. I have some objects multi-state containing buttons (to change the State on - click a grade side is that a less frustrating way to do this?) that are supposed to appear behind other objects. When I go to preview, he puts these objects on the other, by concealing the things that are supposed to be at the front. Layers seem not to matter, order of creation of objects seems not to matter and clearly the arrangement is not serious.

  It is supposed to look like this (InDesign):

  

  The preview looks like this (Content Viewer):

  

  I moved this to the DPS forum.

  Yes, the only thing which may exceed an interactive element is another interactive element. Create two State ESM with identical States set to play once, is the usual solution.

• All the States of the button convert objects

  Is there a function to convert all the States of the button objects?

  Button to convert to object"function converts only the active state, other States are lost.

  I don't know why it works this way because multi-state objects have an option to "liberate all the States of objects.

  Of course, I can do it manually by duplicating the button, selecting the rule of law and by converting each State of the button to an object. But there may be a single function for this as with the multi-state objects?

  Sorry about that...

  Here's the script for the button:

  var i, b = app.selection[0];
  
  for (i = b.states.length - 1; i >= 1; i--) {
         b.states[i].releaseAsObject();
  }
  
  b.convertToObject ();
  

  Hope that helps.

  --

  Marijan (tomaxxi)

• change the State of the button

  Hi, I'm new to labview and I have a few questions.  I came to a point in my code where I'm stuck.  I have attached the code so you can see where I am.  My problem comes into play with the toggle button.  I need to know if there is a way to change its operation based on a condition.  I want to it have where when you press the button, it remains pressed.  But if it meets a condition, it turns itself off.  In my code, I have a point where I need an output message, but because the State of the button does not change, it keeps out the message unless I have disable the program.

  If that makes sense, anyone know of a solution to this?

  Thank you much for the help in advance.

  You can use a local variable of the control inside the structure of case where you write a fake to she to him popping up when you need to.  Your not actually change its operation, but it allows you to programmatically change the current state of the button.

• Question of the multi-state object

  Hello again,

  I would like to have the text window appear only on the click of a button.

  What I have to use a tip for this action or can I simply use a multistate object that I switch?

  If so, how to create an invisible State standard for only the second State as the visible box/picture I want to show?

  Am I missing something?

  Thanks for any help!

  I have to leave now for a meeting, will be back in a few hours.

  You can post a screenshot of the status display? And I would prefer to use ' change the State of... "to be very precise. Did you really follow the workflow, I explained to him? I always double check before answering a question.

  Here are some reading, I used multistates:

  1 share = 5 buttons toggle - Captivate blog

• Multi-state object does not work in the Office Viewer

  I have problems with a slideshow of image (multi-state object) in a manufactured magazine Adobe DPS.

  When looked at on ipad or android, everything works perfectly. But this does not at all on the Viewer from the office.

  is this a known bug?

  Is there a work around for the next issues?

  

  Here is a link to this question with this question:

  ECO Sustainable Design Office EN 2015: peace in a former tobacco factory

  Kind regards

  Myra

  Myra,

  Office Viewer is old and it is really useful only for the most basic content preview. We have not updated the Viewer from office more than three years. I suggest to use the iPad or Android directly devices to get an overview of your work.

  Neil