Way to extend the memory of the Satellite R850 Pro

Similar Questions

• Is there a way to extend the layer of text in after effects 2015 beyond two paragraphs (or about 500 characters)?

  I work with a long scroll of text after effects CC 2015.  I'm creating an introduction of 'Star Wars' style based on a sample of YouTube project and I downloaded the file that the author of the project was created and, like my creation of the project, in my copy of AE it displays only the first two paragraphs.  Here is a link to the project of perspective on what I'm looking for: https://youtu.be/_x0ZOYrLiFQ

  The text has three short paragraphs and a total of about 500 characters.  The first two paragraphs show without any problem.  Type anything beyond paragraph 2 does NOT extend the area of text.  The text seems to disappear and the bottom line to the bottom of the text box does not move.  Yes, there is space in my Viewer to see the text I type if the bottom of the text box was extended downwards.

  By dragging the bottom of the text box changes only the font size of the two paragraphs that are visible.

  Is there a way to extend the area of text beyond two paragraphs or 500 characters?  I'm guessing that there is a mystery being here that I'm missing.

  Thank you, Rick.  Here's what I found which deals with this:

  1. Yes, it seems that it there IS a length limit initial with text boxes created in native mode, and it seems to be about two paragraphs or 500 characters (imagine that).
  2. Good news: it is not an absolute limit.  If you use the text tool (instead of the selection tool, as I did), you can drag the bottom handle on the text block to whatever length you want.  Note that from my experience, it was somewhat difficult to grasp it 'so' to be able to extend it.  However, with a few attempts, I was able to do.
  3. Imported text, as you do, seems to be immune to the original deadline, so it is also a workaround.

  I had not had before this project, a text box to the length I had, so I had never known/had to deal with it before now.

  Hope this helps other people who can hit the same rock to have more text to display their original text box will allow.

  The f

• Best way to extend the partition?

  Do you have a Server 2003 P2V to new hardware.  I used Acronis to clone the server cold, created a new virtual machine, restored to the virtual machine with Acronis, configured with VMWare Converter and then add the VMWare tools, etc.  Everything seems to be fine, except the food not extend the partition.

  I put a partition of 100 GB for the virtual machine, but restoring recreated the original score of 68 GB and another 'unallocated' 31 GB.

  What is the best way to extend the partition, so we can use all of the 100 GB?

  Thank you for your time.

  If a C: partition, you can use extpart, but a c partition: no, you can use the construction in the diskpart tool and extend. With one exception: If you have multiple partitions on a single HARD disk, you will need to use VMware Converter.

• Is there a way to extend the UI font size?

  Menu bars (for example 'file', 'Edit', 'View', etc.) and the different buttons on the user interface of fireworks are extremely low. Normally, this would indicate that my screen resolution is bad, but it's just for other applications such as Chrome, Word and so on. Is there a way to make the interface more user?

  Non - work on a screen high resolution retina and Fireworks does not support that. It will never, since Adobe stopped development and support from 2013.

  If you're on a mac, you can force FW to start in low resolution (Get Info--> open in low resolution). Which will open the FW with expansion, adjacent to the search icons.

  If you are working on a Windows machine, you're out of luck. Or change the resolution of the screen to a twice lower (who defeated the purpose of your screen high-resolution nice).

• Is there a way to extend the keyframes of an item when you add crossfades in and out?

  Is AVID, FCP pro does not have.

  Don't know what you are asking exactly, but if you want an access/extend the keyframe beyond bounderies clip in the effect options, uncheck the PIN clip from the menu of the wing.

• Won't boot satellite R850 Pro - fan snoring; power light cycles; NumLock on

  My R850 Pro Satellite won't start. When I press the power button the power light on the laptop (under the mouse buttons) travels flashing green, green, orange, orange and the snoring of fan. also the Verr Num led on the keypad is turned on and won't go off in such a hurry. The screen is blank and plug a monitor displays a white screen.

  Remove the battery has no effect, the same results as with.

  The hard drive is readable went out and attached to the other pc as external drive using a shopping cart.

  Any ideas on what to try, hope someone can help you.

  Thank you, Carol

  You see a Toshiba splash screen at the beginning?
  You can access the BIOS?

  If this is not possible, a serious hardware problem appeared...
  It could just be a memory, but in the worst cases, your motherboard is the problem

• Best way to extend the drive C on Virtual Center VM - ESX 3.5.0 213352

  I am trying to increase the C drive 10 GB to 15 GB on our VM virtual Center. Is this VM on an ESX 3.5.0 host 213352. I went to change the settings on the machine virtual and changed the drive C 10-> 15 GB vmdk. No problem. I then connected to the virtual computer and went Mgmt of Windows disk that shows the C drive in NTFS base 10 GB with a 4.99 GB unallocated volume space beside him. I then went to Diskpart and entered the command line and selected the C volume range. I received the following error message "the volume you have selected cannot be extended. BTW - the page file is located on drive E and not on the C drive. This virtual machine has C and E only.

  I used the VM converter in the past, but it will not work in this case because the VM I want to choose to expand the C drive is the virtual Center VM. Any ideas on why diskpart will not work? Other solutions? Thank you!

  You can also use extpart, allowing that you extend without interruption

  .. .or the old way of fashion with a helper VM

  http://vmprofessional.com/index.php?content=2k3resize

  Make sure that the virtual machine has no active snapshots.

• Best way to extend the network of Apple using Cat5 and wireless, but with access to the same network

  Appreciate any help here.

  I need to extend my network coverage for the part out of my house where the current signal does not cover.

  I have a Time capsule in the office connected to my Modem and then created a wireless (XXXX) network that connects to the extreme in my front room... .well when I'm in my room before the signal does not increase when I go near the extreme... and maybe it's that I'm still picking up XXX to my Time Capsule wireless network.

  I'm just a Cat5 cable around the House and I was wondering if I can connect the TC to the extreme via CAT5 and therefore the extreme would be able to stream my network wireless XXXX?

  If I then want to connect to another airport (explicit / extreme or even TC) in the part of my house which currently gets no signal... then do cela via Cat5 to the EXTREME at the 3rd device... or must it come directly from the TC?   (and again... the 3rd device will also be able to broadcast the network XXXX?

  Ideally, I want the network to be possible STB and flavours around the House, and I think that the connections between Ethernet devices would accomplish that... but I also need the i-devices, streaming boxes etc. around my house to then access the XXXX wifi network I have printers, VPN, etc all together towards the top on.

  Oh... and 1 other point, I have a cisco 8port 10/100POE switch managed... which I would also like to include in the network to connect to the servers and devices IP etc... is - it possible... and that has to be directly connected to the time Capsule and could I still use it to take place between the TC and the 3rd Apple Airport device... as above?

  Hope that makes sense... but please let me know if you need more details.

  I'm just a Cat5 cable around the House and I was wondering if I can connect the TC to the extreme via CAT5

  Yes. Hate to be picky here, but I hope you'll use CAT5, CAT5e cabling being quite a bit obsolete.

  wireless network and if so the extreme would be able to stream my XXXX?

  Yes

  If I then want to connect to another airport (explicit / extreme or even TC) in the part of my house which gets currently no signal... then do cela via Cat5 to the EXTREME at the 3rd device

  Yes, but it would be preferable to cables to connect the 3rd to the main TC, if that's an option.

  or does have to come directly from the TC?

  No, but it would be better if she could, if this is an option.

  and once again... the 3rd device will also be able to broadcast the network XXXX?

  Yes

  and I think that the connections between Ethernet devices would achieve this

  That is right. Ethernet is always the best choice in terms of performance.

  but I also need the i-devices, streaming boxes etc. around my house to then access the XXXX same wifi network I printer, VPN, etc all together towards the top on.

  That should work well.  However, you may not aware that most of the PC and iOS devices not 'automatically' between different wireless access points as they move from one place to the other.  For example, you have your iPhone near the time Capsule, so he'll be looking for a strong signal from the time Capsule. If you move the close AirPort Extreme iPhone or any other device 3rd... the iPhone usually will stay connected to wireless Time Capsule... even if a stronger signal may be available in another wireless access point. Nature of the beast with IOS devices.

  Thus, with most of the PC and iOS devices, you will have to get used to temporarily turn off the WiFi on the iOS device when you move from one place to the other, then re - turn on WiFi once the device is close to the other wireless access point. The iOS device then generally will pick up the strongest signal from the nearest access point.

  Portable Mac computers will generally do a good job of automatically 'switching' to pick up the best signal of different access points in you walking the laptop around the House.

  I have a cisco 8port 10/100POE switch managed... which I would also like to include in the network to connect to the servers and devices IP etc... It is possible.

  Yes, but the Time Capsule and AirPort Extreme Gigabit Ethernet ports or 10/100/1000, then the switch is going to limit the maximum speed on the network at 100 Mbps when the devices are capable of much higher speed.  If you plan to invest in the installation of Ethernet wiring around the House, then you also want to invent a new Gigatibit Ethernet 10/100/1000 switch, because it will allow up to 10 times faster compared to a 10/100 switch network connections.

  can do this via Cat5 to the EXTREME at the 3rd device... or need to come directly from the TC?

  Yes, but it would be best to connect the switch to the time Capsule if it is an option.

  and could I still use it to take place between the TC and the 3rd Apple Airport device... as above?

  Yes

• Replace HARD drive by another on the Satellite A60 Pro?

  Hello world!

  I was wondering if I could replace my hard drive (4K 40) on my TOSHIBA Satellite Pro A60, if so, please tell me how.

  Thank you!
  Suddste

  Hello

  AFAIK removed some covers if you want to change the HARD drive. Sorry, I don t find any detailed instruction how to replace the hard drive. I recommend you ask the service partner for details.

  Good bye

• Installation of a new HDD in the Satellite 4320 Pro, advice?

  I need a new HARD drive in my baby, his old HDD is clicking and whirring and apparently not in good health, more since I installed Windows XP with service pack 2 I can no longer hold my programs on the tiny 6 GB thing!

  I was wondering if you wonderful people out there can help me by answering my questions:

  1. is there a limit on the size of the HARD drive that my ' 4320 Pro can take, if there is a limit (for example, 10 GB) so can I upgrade the BIOS to allow for a more generous size (say 40-80 GB)?

  2. is it difficult to remove the old HDD and then put the new? Has anyone else done this procedure before? Should I take my baby into pieces? I installed the new memory before and had no problem :), it was very easy it will be that easy?

  3. What is the depth of the original 6 gb 2.5 "HDD in my little girl? The replacement of all them seem to 9.5 mm deep will take a kind of foam spacer if for example my old HDD to 12 mm?

  4. Finally someone noticed problems once they have installed a new HDD on there Sat Pro?

  Thank you in advanced for your wisdom.

  :)

  Hi Stu,

  In response to your questions: -.

  1. most computers manufactured since the end of the 1990s can accommodate the larger discs, I found several supplies citing disks > 40 GB for your model. Any restrictions imposed by your BIOS could be corrected.

  2. remove the HARD drive is relatively simple and will generally involve nothing undo more than a few screws. Most hard disks are held in a caddy of some kinds and this will have to be transferred to your new drive. You must locate your current HARD drive (it must be under a Panel on the side or your laptop. Note that some models locate the HARD disk in the optical drive, so you may need to remove this first.

  3 hard drives usually come in two sizes, 2.5 "and 3.5", this refers to the width of the player. the real depth is largely irrelevant, since it will be held in a caddy. You certainly should not wrap the reader with the foam.

  4. I replaced my drive HARD original with an 80 GB version. The process took less than 10 minutes, and then I just rebuilt my system from the product recovery discs before restoring my data on a backup CD.

  HTH

• Flickering screen on the new Satellite R850 Pro

  Hello

  My new laptop R850 has a very strange habit.

  Its screen flashes randomly to two or three times (it takes only less than 1 sec, but sometimes very common). I tried to update bios, drivers and reinstall the system and I tested it also, but nothing has changed.
  I sent R850 serving for the tests, but all the hardware test succeeded!

  Can someone help me solve the problem?
  Driver error Windows 7?
  Any idea, advice to repair?

  Thank you

  > Can someone help me solve the problem?
  I would like to do it but how?
  All what you have done is right and if Toshiba service can't help how to do this. If the diagnostic software is unable to find the problem I think that there is nothing you can do about it.

  Talk with your dealer and ask if you can get the replacement. In my opinion this is the last reasonable option for you.

• Motorcycle G How can extend the signal of text

  When I get a signal for a coming text, it gives only a short warning.

  Is there a way to extend the warning sign?

  As when you set the alarm, it shuts down until you stop

  Personally, I think it should be this way that SMS are not guaranteed delivery. They may fail in the middle and the sender and the receiver cannot ever - if something is important, someone should make a phone call. Then both parties know that the message has been received (assuming that no voicemail).

  If you want more, then check out the text 3rd party programs and see if they will alert up to stop. If you get a lot of text messages, this could be a nightmare.

• I need to extend the GameCanvas but also UiApplication

  Hello. I'm working on a game for the BB and I have a problem. The game is designed to work on other mobile devices, while it extends the common classes of MIDlet and GameCanvas. Now I'm trying to transfer my application on BlackBerry, and I'll try to find a way to extend the UiApplication and screen, classes because I need to register for keyListeners, trackBallListeners, override the navigationMovement (...) method, etc. I'm sorry if I ask too much or what I want can't happen, but I am new to J2ME and RIM. Thank you!

  game of public class extends GameCanvas implements Runnable {...}
  public class MIDlet extends MIDlet {...}

  you need to switch to the UI of the rim infrastructure, then. one or the other.

• Extend the life of the battery

  What is the best way to extend the life of the battery of my laptop? It seems that different sites have different recommendations.

  (1) should take you your battery whenever your laptop using power? Or only after only 2 weeks of all continuous power (like the HP website seems to recommend)?

  (2) how many times should I condition the battery?

  (3) when you use your battery, should be completely empty before recharging again to capacity?

  Thank you very much! All tips are very much appreciated.

  Message edited by kaobelle on 07/23/2009 23:06

  Hello

  (1) should purchase your battery if it will be put off for two weeks.

  (2) you need to calibrate your battery once a month

  (3) calibrate your battery takes care of this.

  Here is a very good reference document-

  http://support.HP.com/us-en/document/c01297640

  Don't forget to check out the other links on the bottom of this document as well.

• That extend the functionality of DPS

  Salvation;

  We develop internal iOS and Android apps (both native and web) and recently we discovered DPS and we want to migrate some of the print jobs to DPS and integrate some of our current functioality with DPS applications. For example:

  We can create content rich/intereactive with DPS, but put on the interactive page are limited with video, audio, panaroma... etc is what we want to extend this to add additional functioality such as coverflow galleries, custom web players, 3D content viewer, maps... etc.

  I do not have that this is possible or not

  -Wrap app DPS in a container application

  - Or by calling the native application of DPS app

  - Or the development of interactive models customized with the Indesign API

  Another question. DPS is based on Adobe Air technology?

  Thank you

  The only way to extend the applications of DPS is using HTML5 and JavaScript, using the items HTML or web overlays. There is no way to wrap the DPS in a container application or call a native application of DPS.

  The iOS Viewer is not an AIR application. The Android player and the Content Viewer for desktop PCs are.

  Neil