Multimedia remote TSGH-2401 model

Similar Questions

• Remote Panel VI model

  My application throws an instance of model VI dynamically, and I wish have remote command for each of these models. How can I create page remote panel HTML for each instance on the fly? Or is there a way by which I can access by remote model instance? My application is in LV 8.2.1 and I need this application EXE.

  Thank you
  Luxama

  
  

• I can't program my new remote control sony model rm - ez4 to my comcast cable box

  Any ideal about programming for this new remote control. I tried the codes listed, but no luck.

  Hi Mike,.

  Welcome to the community of Sony!

  Try programming the remote using the codes listed for the decoder to other manufacturers. If this does not work, use the method of research which will find the code for the cable box. Instructions to search the code of the component are listed below.

  
  If my post answered your question, please mark it as "acceptable Solution".

  Thank you for your message.

• Where can I find driver for MS Wireless MultiMedia Keyboard 1.1 model 1014

  I am running XP Pro 64-bit, 8 GB of Ram.  I recently had to format my HD and everything... to reinstall all the software programs and hardware connected.  This includes the keyboard listed in the title of this message.  Everything works... MS Wireless Optical Mouse 2000... and all the keys on the keyboard, with the exception of the key 'Sleep' on the far right end.  I used the CD packed when I bought the keyboard and the mouse packaged together.

  When I go into settings where it shows the list of ads of the keys, the sleep key is not in the list!

  I uninstalled the keyboard using the Panel of configuration/Add / Remove programs.  Then, I ran CCleaner and restarted my computer.

  I then download and installed the driver only POSSIBLE listed on the MS site, and I noticed that the list did NOT say 1.1 that the Sleep button still does NOT work.

  I then uninstalled the newest driver and once again used the original CD, restarted my computer.  Nothing has changed.  All keys UNDER the intended MS sleep function key.

  I checked the properties, hardware, driver, Control Panel, keyboard.  It shows 6.31.222.0 driver.

  This keyboard operated perfectly from November 14, 2008 when I built this desktop computer and it should once again!

  How can I correct/eliminate this problem?

  Hello

  You have whatever it is again plugged into the PC?

  You are still able to get in mode sleep without the use of this shortcut key?

  You may need to reinstall the system drivers, like you, for example video card drivers.

  In addition, in the data sheet of the product (in the link provided above), you will notice this line: shortened sleep functionality is available if your system supports power management and it helped, and that all devices are compatible with power management.

  This is why I am asking if there is that anything that is plugged into the PC that might be turning off standby.

  Also, since you said it was perfect in the past, have you tried a system restore to a point in time in which it was working fine?

• Keyboard Lenovo Multimedia Remote shipped without USB dongle

  Just one complaint

  I ordered a keyboard about 4 weeks ago. It took a while for lenova to ship,

  I received it last week, when opening the box, I see a keyboard/battery and manual, the box is missing usb dongle.

  Without the dongle, I can't use the keyboard, I tried to contact the sales team, they mentioned something about this return shipping and wait for a new shipment.

  This seems quite complicated to get this working. I have no instructions on how to send it back and if it will cost money to RMA, it adds to my suffering

  Sonisame

  the wireless usb dongle is located in the battery compartment.

  http://thinkorama.WordPress.com/other/keyboards/Lenovo-mini-wireless-keyboard-N5901/

• control remote for PC

  I want to HP 700 - 500z PC with TV tuner, came with a TSGH-2401 remote control.

  Where can I get the instructions for the user to control?  I'm not familiar with the device.

  Do I have to install a TV signal antena?

  The remote is an infrared device, so it sends a signal to an infrared sensor on the computer. Yes to use the TV feature that you have to attach an antenna or a coaxial cable from the provider of pay-per-view television tuner at the back of the computer. Within the Cyberlink Media Suite, you should have solutions TV from Cyberlink. Windows 8.1 is more a Media Center feature rich, but I think that you can add it with a download from Microsoft. Once you join a TV signal to the tuner card and open the program it will guide you in the use of the remote control.

• Satellite A500 - remote control drivers for Windows 7

  Hello world

  I bought the Satellite A500, very happy with it, but I change the operating system (vista) to the RC of windows 7, it works very well, the only thing is that I can't find the drivers for the remote that came with the laptop. It works quite simply, no answer at all... I have not found a driver for the A500 in any case, even for Vista...

  All I know is that the remote works fine because I can use it on the media center to my Xbox 360! : p
  But from the laptop, no answer at all... I looked for everywhere, tried to install the driver remotely for other model of Toshiba, even the beta one for 7, but still the same problem...

  Your help is welcome, thank you for any response.

  Coch, France.

  Hello

  > I have not found a driver for the A500 in any case, even for Vista...
  It seems that the A500 is brand new on the market and I think drivers (Vista) which will be released in the near future
  You'll have to wait a little

  I think the Vista driver compatible with Windows 7.
  I installed Win 7 on my laptop and most vista drivers work.

• Windows Media Center is unable to start with RF remote control

  WMC to: 6.0.6002.18242 (Vista SP2 - gdr.100414 - 0533)

  Remote control: Medion OR28v Vista remote control made by x 10 RF

  1. a couple of days, I tried to start WMC with my remote in the normal way, but nothing happened at all. Normal start was always activate WMC remote once the model has been started.

  2. Subsequently, I reinstalled the original drivers of my back on my hard drive. I then did a Windows Update and 2 X10folders have emerged, (X10HID and X 10 Transreciever(ACPI Complient) Wireless USB device)

  3. now, the remote has yet acivate WMC, after a start UNLESS I go into the PANEL... click on WIRELESS REMOTE SETTINGS... on which WMC activated instantly! (the channel also change Panel that appears, and then had to be cancelled)

  4. I can also activate WMC in the mouse in all THE PROGRAMS by clicking on the folder WMC

  5. I can now use all the functions in the usual way on the remote control. Also can I resart WMC at any time with the remote until I reboot/start.

  6. to reinstall the original drivers, para 2 refers, no functions of the remote control could be used even when starting the mouse during activation of WMC in the folder all THE PROGS of WMC

  .

  Thus, PES Advisor How do I get my remote to turn on the WMC after start/restart, notes: the remote control to activate all the functions but only when the WMC is active in the alternative path as described above (paras. 3 and 4)?

  It seems that nobody here knows answer (including me). I suggest that repost you this on The Green Button forums, there are some experts WMC.

• 64-bit Windows 7 driver for Atheros AR5007 in dv7-1468nr

  I have been in communication with Microsoft and HP technical support both on this issue.

  Can we please have a time frame on how long before that we will have a driver for the wireless card that is in this model the actual 64-bit?

  I don't want to sound rude here, but Acer has been much easier to get around the problem of driver for windows 7.

  Microsoft did confirm this evening that there is no 64-bit for this AR5007 driver and back to HP.

  Atheros seems to deal specifically with suppliers more with the support of its prodiucts, as it is my return to HP after six years of absence and the fact that my company is jumping through the hoops for the HP partnership, I would like an honest answer from an employee of HP.

  How long before that this driver is available in 64 bits?

  Until that time, all of the product is worthless for me as a professional and as a student for the simple reason that when you try to use a suppliant of security required for authentication, the network manager crash when using the measure of 802. 1 x. Microsoft has identified that specifically a driver related issue because there is no driver 64-bit available.

  Not to play against each other here, but in my profession and in my studies, I tend to promote these products that seem to work better and where assistance is available. The Acer also contained an Atheros card, but it was changed to use a broadcom driver in Windows 7. No idea why or how, I know that it works and it supports the Cisco PEAP supplicant, which is an important issue with the dv7-1468nr and Windows 7 with the Atheros AR5007 wireless device.

  Other related driver issues such as the multimedia remote that might be expected given that windows 7 has not officially released, but when I contacted support on the card reader does not not (another feature that works out of the box on an Acer hardware), I was told basically sorry charlie, good luck. Fortunately, I was able to locate an XP driver for the card reader works. The media remote is a trivial question, but the wireless is a serious problem. If it cannot be resolved within a reasonable time, I fear I will be boxing it up to return to where it was purchased, as defective. the deployment is in a few days...

  lets hope that we can really appropriate at this time that drivers.

  After three long sessions with Microsoft and a few sessions where I was not very tolerable with the "apology" given for drivers not made available via the website of HP, I was able to refine the exact question to something other than a real driver file.

  If the question was not in fact the driver file, it does not change the fact that HP should provide drivers on their website that they will BE supported for all operating systems promoted regardless of the version (Home Basic, premium, professional, ultimate, etc..). It became a problem in my final conversation of a HP technician before they gave me a link to a driver file real 64 bit, of course claim immunity from liability for any damage as a result of the application. The link of this driver is here.

  Now for the real root of the problem.

  On the new installation, there are several devices that have remained unknown in Device Manager.

  Day after day, a lesbianism HP drivers and applications to solve problems.

  What was actually the connection magaer crash on trying to manually create a connection by using the Cisco's PEAP Protocol was a corrupt application of Cisco installation. Through the process of trying to repair the installation and actually manually change the registry and remove all traces of the application with Microsoft in the remote session, it was determined that the system had become corrupt and need a fresh 'custom' install.

  After installation, using all the HP and Microsoft drivers only, (no application of third party still installed) I have successfully install the 64-bit application Cisco PEAP for 64-bit Vista and create the connection which is required.

  To date, there is only one problem with this laptop and I expect a fix from HP for it in the coming days.

  The HP MediaSmart application for this machine special 64-bit is always just a touch unstable running Windows 7 Professional.

  I hope that it can save someone else the days of frustration I endured everything in trying to solve this problem.

• PROBLEMS WITH TX2Z 1000 CTO

  someone please answer me the following questions:
  
  1. the members of some communities touchsmart claim that "sometimes the HP does not control remotely with the model and their laptops also have a matte screen instead of the screen shining in this model". is this possible?
  
  2. I'll have 2 notebooks of this model at the same time & I want to be assured on the previous question. is there someone actually deal with this problem?
  
  3. which model is best, or what are the differences between tx2 & tx2z models?
  
  PLEASE HELP ME DECIDE

  (1) sometimes due to the packaging that your remote control is not in the laptop box or in the slot on the left side of the laptop. If you have checked both places and you have not the remote and you think you should have a contact HP. If you are in warranty HP will send you a replacement as long as it was supposed to come with your custom unit

  (2) people have had this problem, but the resolution is displayed above

  (3) better, it is a matter of choice staff and specifications. The TX2000 and TX2000z are built customer units, if this is not applicable to your question. you could build a better TX2000 a TX2000z or vice versa. The Z is only an indicator of the series.

• HP Officejet 6500 a e-All-in-one: ePrint is no longer available?

  Hello

  I had this printer network enabled for a number of years, still works well. Wireless sound is NOT enabled.

  At the beginning, I set up an email @hpeprint.com, but never used now. Now I have a need to use it and tried emailing, but it not happen/printing, although I had some kind of auto-answer/eprint system notification, that work has been received and if not print then check out ABC...

  Start troyblshoot, I see that the hpeprint.com site has been decommissioned. This means that the service no longer works?

  What are the options to I have print remotely on this model?

  Thank you!

  Hi Kneidels,

  Hpeprint.com is now replaced by hpconnected.com with many new features.

  ePrint Service is always available.

  If you are able to see the e-mail ID on the panel display front end printers, then the e-mail ID should work.

  Also, you can find apps on android and ios stores remote printing. [HPeprint, remote printing]

  Kind regards

  Oliver

• BIOS and drivers required for CQ45-106AU for OS Windows XP or Free DOS

  Hello, I bought laptop Compaq CQ45-106AU which has Windows Vista Home Basic OS and I am unable to find the BIOS of motherboard, Chipset drivers and all drivers for this perticular computer laptop, I want this downgrade to Windows XP Pro or I want to to Free DOS so if anyone has the solution to this then please send me information as soon as possible. Thanks in advance to all who pass by this message.

  I recommend you stay with VISTA.

  This chip Audio IDT using model and ENE CIR receiver driver XP were hard to find.

  ENE CIR is essential if you have purchased the remote for this model.

  Some of the user CQ45 found they will lose control of BRIGHTNESS setting (Fn + F7 and F8) due to the incompatibility of the QLB software.

  However, if XP is essential for your applications please perform steps below.

  ____

  Your model must sata driver AMD sliptreamed on XP installation CD.

  If you did it right, you'll BSOD error.

  Use Nlite to slipstream sata driver AMD.
  A good guide for driver sata sliptream, here

  Note: Do NOT use this guide sata driver, your sata driver is given below.

  AMD SATA AHCI Controller Pilot, here

  or

  If you want an AMD SATA driver from HP site, here

  extract sp39719 to a folder and use the files in the RAID7xx folder

  Note:

  Select ONLY x 86 AMD SATA AHCI driver

  Download nLite , here

  Make your Vista recovery cd/DVDs if you have not yet discovered it here

  _____

  Try the following drivers,

  Drivers XP for CQ45-106AU

  Install .net Framework before the others, here

  Suite software Catalyst (for your Chipset ATI, HD 3200 Graphics/video and LAN drivers here

  Audio installation is the most difficult part, since the BIOS incompatibility.

  Install MS-SAU first, here

  IDT High-Definition Audio CODEC Pilot,

  a version update of Microsoft Update Catalog here

  or

  or if you want to install HP IDT driver (VISTA), here , some user indicated that it also works with XP

  or try the new version here

  Note:

  Some users CQ40 CQ45 must update their BIOS to fix Audio that disappeared after rebort.

  If you have found your BIOS is lower than F33A, update your BIOS to the latest version here

  High-Definition Audio (HDA) Modem Install drivers, here

  Broadcom Wireless, here

  Realtek RTL8102E Family PCI - E Fast Ethernet NIC, here

  JMB38X card reader Host controller driver, here

  ENE CIR Receiver (your Vista driver), here

  or if it doesn't work try Vista driver checked Intel, here

  HDMI Audio, here

  ALPS Touchpad Pilot, here

  HP Quick Launch buttons, here

  If you have Bluetooth, here

  If you had for 7 unknown devices (buttons drivers), here

  Installation-> right click machine.inf, choose install.

  Good luck

  Message edited by Mariza on 04/01/2009 12:11 AM

• Automatic installation of the RNDIS driver

  Hello

  Why when you connect a Linux USB Ethernet Gadget for Windows 7/8, and perhaps others, Windows does not install the driver automatically?

  The driver is already on the hard drive and Windows knows the DEVICE class. Should be simple. Am I missing something?

  Best regards

  Ulrich

  Hello

  Welcome to Microsoft Community forum.  Let me help you with your concern.

  Windows uses information files (INF) the installation program to install the following components for a device: one or several drivers that support the device.

  INFs

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff547402 (v = vs. 85) .aspx

  To use the Remote NDIS driver with a USB device, you need a file INF. see this Microsoft article.

  Remote NDIS INF model

  http://msdn.Microsoft.com/en-us/library/ff570620.aspx

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• The response of the mouse becomes slow and I get the low battery warning

  Original title: Use the Microsoft Wireless Multimedia Keyboard 1.1 model 1014.  Recently, I had replace the batteries in the mouse at least once a week.  Is there a solution?

  The response of the mouse becomes slow and I get the low battery warning.  Until this started happening batteries have been change less than a month.

  Hello

  1. What is the brand of mouse and the model?

  2 have you ever done any recent software or changes to the hardware to the computer?

  If you use the Microsoft mouse, I suggest you follow these methods:

  Troubleshoot a wireless mouse that does not correctly:
  http://support.Microsoft.com/kb/321122

  Troubleshoot the incidents of the response to the mouse or wireless keyboard:
  http://support.Microsoft.com/kb/838398

  Use the following tips to get more life on the batteries in the keyboard and mouse:

  a. use the mouse on a surface of clear color. With the help of the mouse above a black surface can deplete the battery at a faster pace.

  b. do not use the mouse on a glass surface.

  c. when replacing the batteries, use alkaline batteries. Other types, may not last as long.

  d. when wireless devices are not in use, store them near the computer.

  I hope this helps!

• Copy a table with a local domain defined on another design

  Hello

  I have a design with a defined local area (the area is defined in design, not in the fields in the default directory of types system). A table is using this area.

  The table is copied to another drawing and appears as a linked table. In the linked table definition the definition of area is visible.

  During the closure of the design with the original table definition, the definition of domain is no longer visible, and the column definition is incomplete (only the data type is indicated). The reason is clear: the field is defined only in the design, that contains the table definition the original and not in the design have been copied to.

  So when faced with a table, it should be checked if the used areas are the defined. If so, then one of the following options must be taken:

  -stop copying, the area must be moved manually in the domain file to the directory of types of default system using the administration tool of areas. Or

  -ask the user to accept the areas are displaced local design to the default directory of system types. Please keep the same domain ID.

  In this way, the design remains consistent.

  Best regards

  Joop

  Hi Joop,

  During the closure of the design with the original table definition, the definition of domain is no longer visible, and the column definition is incomplete (only the data type is indicated). The reason is clear: the field is defined only in the design, that contains the table definition the original and not in the design have been copied to.

  What version of DM? In DM 4.1.873 ai2 (should be the same in EA1)-areas local sources are copied as local areas in the design of the target, and they behave like other related objects. No problem if the design of the source is closed. The only problem is the synchronization of these areas - "Synchronize remote objects when model loading" must be checked in the areas of the command get synchronized with areas modified sources. And the design remains consistent.

  Philippe