Multiple calculation Manager groups

Similar Questions

• Constants in the calculation Manager

  Hello, is there a way of constant output in calculation Manager?  I tried to generate a value, but I get an error (object required: 'CurrCalculationValues').

  Specifically, I want the molecular weight of carbon output.  Since it is a constant 12,011 g/mol, that I do not see how to set the value to use in other calculations.  I don't want to enter the constant in each calculation that uses it as an input, I prefer to use the dependency.  (There are other constants which are a little more complicated than this one).

  I guess I can sum up my question like: "How you use constant OUTPUT calculations as INPUTS to other calculations channel."

  Hi Russell,

  I recommend that you export each constant to a property attached to the root level, group or channel (depending on which is most appropriate based on the scope of the constant).  Then, you can reference this property as an input in the subsequent calculations.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• The value of path as unit target in the calculation Manager

  Hello

  is there a way to define a course of treatment as unit target in the calculation Manager? I have data with unspecified units (for example, deg_Cel ° C) then I disabled the calculation of the amount in function. Now I want the result channel have the same unit as the first input channel (something like @@ChnUnit (N) @).

  Best regards

  Martin

  Hi Martin,

  You can launch the Manager of calculation without management unit (turn based on the amount off the coast).  You can set the property unit of the resulting string with ChnDim() to be of the same unit as the starting channel.  I guess you do all that with a VBScript.  You actually run the Manager calculation by hand with the mouse?

  You can add as many lines of VBScript code that you want at the end of the normal equation.  Here is an example of calculation which comes with tiara:

  P = n * (2 * Pi / 60) * M * (1 / 1000)

  If you click the button, you can add the following line of VBScript call second to run the equation:

  Calculate the call ("P = n * (2 * Pi/60) * M * (1 / 1000)", CurrSymbols, CurrValues, "kW")
  
  ChnDim (P) = ChnDim (n)

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• window of 2008: ' I can't open Group Policy Management "group policy to manage, you must log on to the computer with a domain user account.

  Hi, please advise, I can't open Group on win Server 2008 policy management, it is said
  "To manage Group Policy, you must log on to the computer with a domain user account.

  Hi Cucu KurniaPutra,

  Thanks for asking this question to Microsoft Community!

  The problem occurs in Windows Server 2008 Network, please post your request on the Microsoft TechNet forums to get help.

  
  Here is the link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• My Windows Mail contact screen has changed. I don't have a toolbar at the top for managing groups of contacts/contact etc, it now looks like my pictures toolbar.

  my windows mail screen has changed, I don't have a toolbar at the top to manage groups of contacts/contact etc., it now looks like my pictures toolbar - options being organize / view / slideshow/burn - how to get the tool bar back original?
  I think this changed when I started using my iphone and sync-ed were contact (I'm sure that's not a Word) with the iphone.  But it could just be a coincidence.

  original title: problems with windows mail

  There should be an option on "customize this folder".  Click on that and then you can change customization of Contacts.

  Steve

• Calculation Manager site launch connect to 11.1.2.4

  I am actually looking for the equivalent newspaper to launch HBR connect 11.1.2.1 which shows ask what time of execution have been entered, how long the rule Manager calc took etc.

  I tried looking for that but the locations do not match:

  Location of the log of the calculation Manager?

  File vacuum calcmgrlaunch.log

  Note, I'm trying this for a HBR Essbase not planning.

  I don't know there's an equivalent for essbase, rules are executed directly on essbase, so probably the essbase application log

  See you soon

  John

• Calculation Manager does not start after the 11.1.2.3.500 patch

  Hi all

  Before the upgrade with the patch 500 the EPM environment worked very well.

  After you apply the hotfix (17529887) and later (19142919), I am facing a strange error.

  After restarting the services, Manager of calculation does not work. All other components of EPMA operate correctly.

  When trying to start the calculation Manager, the window becomes like a Web page when there is no internet connection. Internal error in the server with instructions to check your internet connection, etc..

  I looked in several log files, but did not find anything.

  Where to look?

  Kind regards

  Philip Hulsebosch

  Hi Philippe,.

  We had the same problems with our manager of Calc, but our environment was on a SSL using SST. To apply a patch 18880328 on 17529887 to get this working. Don't know if you're on SSL, but its value give a try.

  From the Readme:

  18814874

  After the application SSL using SST, sailing Manager of calculation, may show a blank page.

  https://updates.Oracle.com/Orion/services/download?type=Readme&Aru=17802865#_Toc391649535

  You also have to apply 11.1.2.3.501 Hyperion Shared Services (18672071) If you are on SSL.

  HTH

  Thank you

• Calculation Manager takes a long time to open after application of the correctif.500

  Hi all

  We have our EPM environment in windows Server 2008 and have recently applique.500 Patch and all components work properly except calculation Manager and when I connect to the workspace and open the calc Bishop taking lot of time (8-10 Min) to open and after which I get an error like "there was an error in retrieving the list of typical applications. Please see the log file of calculation Manager for more information.

  I checked the CalcMgr0.log but I see no error here.

  (1) how can open the mgr quick calc without taking a lot of time because the customer does not accept that his lot to take some time to open.

  (2) how can I ensure that I don't get the error above.

  You can see the screenshot of the error above in my blog:

  http://Hyperion-consulting.blogspot.in

  Kind regards

  VJ

  Hi all

  I solved the problem...

• The calculation Manager GUI

  Hello

  In the calculation Manager GUI does not appear in FireFox (I have remote XUL addon installed and activated) and wrote a plugin is required to view this content. This plugin should be?

  Thank you

  It requires adobe flash player 10 +.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Automate the calculation against Essbase ASO through the calculation Manager

  Hi all

  Anyone know if I can automate the calculation stored in calculation on a cube Essbase ASO Manager?

  I need calculation automated directly against an Essbase cube as it is not a planning application.

  I tried to use CalcMgrCmdLineLauncher.cmd , but it seems not to be able to find the application. I'm assuming that she tries to locate a planning instead of an application of Essbase application.

  Currently I have a number of calculation parameters in the calculation Manager but I would like to automate the process, as well as on a daily basis, the cube is rebuild and recalculated.

  Any ideas if CalcMgrCmdLineLauncher.cmd should work or if there is another method, in addition to my calculations in MaxL.

  Thank you

  Jimmy

  What version? If it's so 11.1.2.3 for Essbase you use a launcher separated in % EPM_ORACLE_HOME%\common\calcmgr\11.1.2.0\lib, calcmgrCmdLine.jar file if it is an earlier version and then probably will need to use MaxL

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• How do we take a scheduled backup of the business rules of calculation Manager 11.1.1.3?

  How do we take a scheduled backup of the business rules of calculation Manager 11.1.1.3?

  Hi Celvin,

  We have to implement something like the utility formdefutil for Web Forms. LCM is an option, however, and we are looking for all the utilities. Please let us know is it is

  Thanks for your help!

• Validation error in calculation Manager business rule (@_AT)?

  I've migrated a 11.1.1.3 business rule and both macros (models) in the calculation Manager 11.1.2.2. When I validate the script I get the following error. Everyone has seen this before or have any advice? Script syntax checks ok.

  "An error occurred in: rule: FCO_3YrBud_DGAlloc error: formula [statement of DIFFICULTY] (line 24) parse error: expected [()] found [@_AT]" after the function name rule FCO_3YrBud_DGAlloc ".

  Line 24 is the first declaration of FIX in the script below show:

  UPDATECALC OFF SET; AGGMISSG OFF SET;

  Model of % (name: = "FCOm_TargetSection", ask: = 'FCO', plantype: = 'FCO', PDT: = ("parm1": = ([["three year Budget"]]), "parm2": = ([["DGAllocation"]]), "parm3":=([[{FCOrtpYears}]]),"parm4":=([[Mar]])))))

  Model of % (name: = "FCOm_TargetAgg", ask: = 'FCO', plantype: = 'FCO', PDT: = ("parm1": = ([["three year Budget"]]), "parm2": = ([["DGAllocation"]]), "parm3":=([[{FCOrtpYears}]]),"parm4":=([[Mar]])))))

  First model:

  UPDATECALC OFF SET; AGGMISSG OFF SET;

  /****************************************************************************************************************

  FCOm_TargetSection

  parm1 = scenario

  PARM2 = version

  parm3 = years

  parm4 = periods

  The purpose of this macro is to translate GBP target and copy in the Curr entry and aggreggated. Step 1: Copy the total Section entry to I / P Total Section and no step 1 project: copy converted into money - no need to translate entries all entries are in GBP step 2: copy entry GBP to Curr NA values

  *****************************************************************************************************************/

  DIFFICULTY (([["trois ans Budget"]]), ([["DGAllocation"]]), ([["FY15"]]), ([[Sun]]), @IDESCENDANTS ("BH - T"), "Curr NA", "basic", 'Entry in the currency', ' one - 6111 "," A - 6112 ',' A - 6113 ', ' a - 65 ',' A - 66 ',' A - 620905 ')

  DATACOPY 'Total Section' to 'Input_Total Section;

  DATACOPY 'Total Section' to 'no project ';

  ENDFIX

  DIFFICULTY (([["trois ans Budget"]]), ([["DGAllocation"]]), ([["FY15"]]), ([[Sun]]), @IDESCENDANTS ("BH - T"), 'Curr NA', 'Total Section', Section 'Input_Total', 'No project', ' base', ' a - 6111 "," A - 6112 ',' A - 6113 ',' A - 65 ',' A - 66 ',' A - 620905 ')

  DATACOPY 'entered currency' to 'convert currency (GBP);

  ENDFIX

  DIFFICULTY (([["trois ans Budget"]]), ([["DGAllocation"]]), ([["FY15"]]), ([[Sun]]), @IDESCENDANTS ("BH - T"), "Total area", 'Input_Total', 'No project' Section, "basic", 'Entered in the currency ", converted into currency (GBP)', ' a - 6111", "A - 6112 ',' A - 6113 ',' a - 65 ',' A - 66 ',' A - 620905 ')

  DATACOPY "Curr NA ' to 'entry GBP;

  ENDFIX

  Second model:

  /****************************************************************************************************************

  FCOm_TargetAgg

  parm1 = scenario

  PARM2 = version

  parm3 = years

  parm4 = periods

  The purpose of this macro is to target data aggreggate Step2: aggregate data

  *****************************************************************************************************************/

  DIFFICULTY (([["trois ans Budget"]]), ([["DGAllocation"]]), ([["FY15"]]), ([[Sun]]), "basic", "Entered in the currency ',' converted to currency (GBP)")

  CALC DIM ("account", "BudgetHolder", "Admission tickets", "SectionProjects");

  ENDFIX

  In fact

  I just re thinking about your message. My comments above is not correct for your situation. The syntax above is correct if you are talking about the code 'in' the model itself (so if you open the template and look at the code). But if the code you have posted in your messages made from the window of script of the rule (in script view) then your problem is something different potentially.

  So the first thing is to make sure that in the model itself (open model), the PDT is defined in the global range or range of Member as [Parm1], [Parm2] etc. (or difficulty, depends on the way the model is shown) as I said in my first reply above, the model only defines the DTP, not members and must be placed between square brackets , as [Parm1}. Who will make that the DTP as defined in your model correctly. Then we need to look at how you define these PDT in the rule itself. Normally, it is much easier if your rule is in the chart view, as you just click on the model and you can enter the values. As you have your rule in Script mode, you must be very careful about how you set the values of the PAO. Every DTP 'type' has a different syntax in script mode.

  Looking at your script again I see another problem potentially. When you set the values in the DTP, the value must locking with double brackets, so [['three year Budget"]]. In your script, you must also in brackets. That is not always correct. There are moments between brackets and double square brackets is correct, but it is only when your DTP is of type 'Members', and by default, according to me, old macros of business rule translates into templates with the "Script" DTP types

  So, if you also change your business section where the models are defined as below; (as you can see, without parentheses around the DTP values).

  UPDATECALC OFF SET; AGGMISSG OFF SET;

  Model % (name: = "FCOm_TargetSection", application: = 'FCO', plantype: = 'FCO', dtps:=("parm1":=[["Three_Year_Budget"]],"parm2":=[["DGAllocation"]],"parm3":=[[{FCOrtpYears}]],"parm4":=[[Mar]]))))

  Model % (name: = "FCOm_TargetAgg", application: = 'FCO', plantype: = 'FCO', dtps:=("parm1":=[["Three_Year_Budget"]],"parm2":=[["DGAllocation"]],"parm3":=[[{FCOrtpYears}]],"parm4":=[[Mar]]))))

  The end of the game should be that when you open your rule and the view script and script tab then select low bottom your models should look as below, as you can see, everything that needs to be included in the script are the values substituted for the definition of the model, the key point is that there are no brackets or parentheses. The script should show script "pure". (I have highlighted and underlined how these 4 PDT should result in script mode)

  First model:

  UPDATECALC OFF SET; AGGMISSG OFF SET;

  /****************************************************************************************************************

  FCOm_TargetSection

  parm1 = scenario

  PARM2 = version

  parm3 = years

  parm4 = periods

  The purpose of this macro is to translate the target entry to GBP and copy of Curr NA and associate. Step 1: Copy the total Section entry to I / P Total Section and no step 1 project: copy converted into money - no need to translate entries all entries are in GBP step 2: copy entry GBP to Curr NA values

  *****************************************************************************************************************/

  DIFFICULTY ('Three-year Budget', 'DGAlocation', FY15, Mar, @IDESCENDANTS ("BH - T"), "Curr NA", "basic", 'Seized currency', '-6111 ", '-6112", "has - 6113", "A - 65", "A - 66", "-620905")

  DATACOPY 'Total Section' to 'Input_Total Section;

  DATACOPY 'Total Section' to 'no project ';

  ENDFIX

  DIFFICULTY ('Three-year Budget', 'DGAlocation', FY15, Mar, @IDESCENDANTS ("BH - T"), "Curr NA', 'Total Section', Section 'Input_Total', 'No project', 'basic', '-6111", '-6112 "," has - 6113 "," A - 65 "," A - 66 ","-620905 ")

  DATACOPY 'entered currency' to 'convert currency (GBP);

  ENDFIX

  DIFFICULTY (FY15, Mar, 'DGAlocation' and 'Three-year Budget', @IDESCENDANTS("BH-T"), 'Total Section', Section 'Input_Total', 'No project', 'basic', 'Entered in the currency "," converted into currency (GBP)', '-6111 ", '-6112", "-6113", "A - 65", "A - 66", "-620905")

  DATACOPY "Curr NA ' to 'entry GBP;

  ENDFIX

  Thank you

  Anthony

• Calculation Manager

  I haven't used the calculation Manager before, I have just installed and configured, there is no error. But how luanch it? When I go to the workspace I can't find calculation Manager in 'administer '. I have tried to launch the URL directly: http://Localhost:9000 / Calcmgr, but I m agetting this error "Please make sure the application you are trying to run is stored in the SSP...» ». How can I apply this advice kindly shared... Services

  You will need to access through the workspace and not directly, in any case launch Configurator EMP and go to the Foundation > configure the web server, then give to the services of a reboot to be sure and try again.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Security roles and workflow management groups

  People,

  There is a section on Workflow management groups and security roles in vCloud Request Manager Installation and Configuration Guide - Guide of Directors Chapter 5 and 6. I have difficulty working on the relationship between the two settings.

  My first question is around the goal of the WM default checkbox that the specific guide is used to set the default user workflow management group.

  What would a never used default WM? I mean, what would he ever substitute the other workflow management groups that you define.

  In addition, in the guide, it say cloud Blueprint Admin and Asset Manager security role is a combination of the Admin of Blueprint of cloud and the Asset Manager. Is cloud Blueprint Admin & Asset Manager being the two groups of workflow management, reasonable to assume that a security role is composed of workflow management groups?

  And when I select agent, I do not see a cloud Blueprint Admin and Asset Manager security role listed?

  Finally, is there a way to determine the exact permissions that contains a workflow management group/security role?

  Thank you

  Cormac

  The Group Management (WM) default workflow is largely an artifact of vSM based vRM.

  VSM, a group of WM is a collection of agents used to apply security and route of tasks, among other responsibilities. (For the purpose of vRM, an agent can defined as users who have access to the vRM admin interface).

  vRM mainly use WM groups as a way to deliver relevant communications to users based on their responsibilities for example vCD Admins, Asset Managers etc. vRM does not require other functions related to WM groups.

  For functional reasons, vSM requires that each officer with access to the capabilities of WM belong at least a WM group. In addition, at least one of these groups must be designated the default WM for this officer group. These functional reasons are not immediately relevant to the specific use of vRM rest however case the constraint. Suffice to say for vRM, every WM user must have a WM group by default even if this information must never be used.

  Roles and groups are separate entities. A role defines a set of privileges to access a particular functional area of the admin interface for example a role WM sets permissions to interact with the workflow. of the roles of management (CM) configuration sets permissions to review and modify records in the repository of vRM.

  A special role of WM can be associated with one or more groups WM. When this WM role is assigned to a user, that user inherits groups associated with this role, WM allowing to simplify the administration of groups. An individual user can also have other WM assigned groups to them directly, complementary to those inherited from their role of WM.

  At an abstract level, vRM defines three types of users of the admin interface:

  1 vCD Admins

  2. plan Admins

  3. managers

  However, the security of MSM model requires that each individual user must be implemented with several components. By default, vRM sets a "Asset Managers" WM Group of what assets all managers must belong. However, WM groups cannot be used to give access to the features as well, so a separate from the "Asset Managers" WM role is obliged to grant access to these features asset managers. By default, the role of "Asset Manager" WM is associated with the "Asset Managers" group such that any user who is assigned the role automatically belongs to the Group also. There is also a separate 'Asset Managers' CM role that gives asset managers they need to the repository vRM for example the possibility to add new licenses for software products.

  This model of definitions is repeated for 3 personas above with a group and several roles defined for each. When an administrator assigns a user to one of these characters they should assign the groups and roles appropriate according to the documentation. They should not need to be concerned by the distinctions between each component.

  The role of the "Plan Director Admin and Asset Manager" reflects that a user may need to be asset manager and a Director of Blueprint. Because a user can have a role to the maximum by functional area, vRM provides a compound that provides two sets of permissions. However, a user can belong to several groups WM, so it is never necessary to provide a composite group.

  The role of composite is there; just maybe not where you expect to find. Blueprint Admins do not need to access WM, so there is not a 'Blueprint' Admin or a composite WM role. Blueprint Admins do need access to configuration management so it's an "Admin blueprint" and a role of CM composite.

  The details of the user screen provides:

  • a summary of all groups to which a user belongs

  • provides a 'Détails' button to drill down on each role assigned to the user to inspect the permissions granted by this particular role

  You must be a vCD Admin to see areas of the screen.

• Cannot use Smart list postings in the calculation Manager

  Hi all
  
  I wrote the script with condition for active listings in Cal Script
  
  If ("Eligible Grade" == 1)
  'Per Diem per capita' = 3500;
  "Travel fees per person ' =' Per Diem per capita' * 'Journey' + 'Avg ticket cost per head."
  "Per diem"="travel time" * 'Per Diem per capita' * 'no. People who travel. "
  "Ticket for depreciation" = 'Avg ticket cost per head' * 'no. People who travel. "
  'By Diem travel expenses allowance ' ="' + 'Ticket for depreciation;
  
  ELSE IF ("Eligible Grade" == 2)
  'Per Diem per capita' = 2200;
  "Travel fees per person ' =' Per Diem per capita' * 'Journey' + 'Avg ticket cost per head."
  "Per diem"="travel time" * 'Per Diem per capita' * 'no. People who travel. "
  "Ticket for depreciation" = 'Avg ticket cost per head' * 'no. People who travel. "
  'By Diem travel expenses allowance ' ="' + 'Ticket for depreciation;
  
  But same Script does not work in the calculation Manager... I know in the work of Manager Smart calculation list differently... can can pls let me know how we need to change to adapt to the calculation Manager

  Hello

  The person above didn't say that [[Smartlist.value]] returns a Boolean value, so you still have a Boolean value in your IF condition.

  Use

  IF ("Eligible Grade" == [[XXGradeEligibility._1_2]])

  instead.

  Thank you
  JM