Messaging displays fake drawing

Similar Questions

• Need help, get message display driver has stopped working, but has recovered

  Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

  Hello

  1. what operating system do you use?
  2. What is the brand and model of your system?
  3. Once you get this error message?
  4. you did it before the issue of any material changes or software?

  Try the steps outlined in the methods mentioned below and let us know if it helps.
  Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

  Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

  Step 1: Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Clean boot in XP:

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Step 2: Turn off the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3: update the driver for
  

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

  Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

  To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

  Use the Group Policy settings:
  To resolve this issue by using Group Policy settings, follow these steps:

  (a) click Start, type gpedit.msc in the search box and press ENTER.

  (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

  (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  Use the powercfg command:
  To resolve this issue by using the powercfg command, follow these steps:

  (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

  (b) at the command prompt, type the following commands:
  powercfg - X-monitor-timeout-ac 0
  powercfg - X-monitor-timeout-dc 0

  Get back to us if the problem persists.

• Computer will refresh not error message displayed is "WindowsUpdate_80240016" "WindowsUpdate_dt000"

  Computer will refresh not error message displayed is "WindowsUpdate_80240016" "WindowsUpdate_dt000"

  Hi valeriecarterZA,

  ·         Updates failed to install?

  ·         You receive error messages in the history of the update to update failed?

  ·         Have you made changes on the computer before this problem?

  Search for the error message for the updates that have failed to be updated. Follow the steps:

  Click Start > all programs > windows update > view update history

  I suggest you follow the steps in the article.

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  http://support.Microsoft.com/kb/957307

  For reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Messages displays instead of contacts phone numbers

  Messages on my iPad displays almost every conversation by phone instead of by contact number. If I type the number at the top of a conversation I gives me the opportunity to add it to an existing contact, and I can navigate to the appropriate contact and see that the phone number is already there. Oddly enough, I have a contact which conversation shows by contact with the photo and all.

  All messages are correctly displayed by contact on my iPhone or Messages on my iMac.

  On the iPad, I went iCloud preferences and deselected 'Contacts' choose to have to remove them from the iPad and then their synchronized again. I also reset the iPad (i.e. held the Home and Power buttons until stop you it and then the Apple screen reappeared before releasing the buttons). The problem persists: Messages does not (mostly) my Contacts.

  What else can I try?

  Thanks in advance,

  Steve =: ^)

  You might be looking at threads of message that began with this phone number for so long, or were part of a group message?

  What happens if you try to messages with a clean slate is by sending a message to a new person marks (starting a new message thread) or by removing all your message the previous discussions (including group messages) involving a person who currently stands as a phone number?

• Messages: display contact photo/initials instead of names

  I use Messages on my MacBook Pro, El Capitan 10.11.4.  Until yesterday, the conversation on the left side of the window list of the full names, photos and first words of the most recent conversation.  Now it displays only a circle with the initials of contact or a photo.  I think that I initiated the change to 'slide' and by changing a setting.  How can I change the first name + the first words of the conversation?

  Thank you very much!

  Try quitting the application, then re open.

• iMessage message display unread when they were read

  I have an unread message, but each message was read continually watch my MacBook Pro. Anyone know how to fix this?

  Try to restart the Dock using the following command in Terminal:

  Killall Dock

  Log outgoing/incoming and test. If this does not work, you need to look in your user Library/Application Support/docking station for the .db. Use the Finder "Go to folder" command. Enter ~/Library/Applications Support/Dock.  Move the .db on your desktop.

  Then try a reset of the docking station.

  Applications/Utilities/Terminal enter the command

  Killall Dock

  Log out/in test. If it works fine, delete the .db from the desktop.

  If the dock is the same, back up the .db you, crushing the latest.

  If you prefer to make your library user visible permanently, go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Reprints of Leonie.

• ThinkPad 14 Yoga - Lenovo solutions Center: strange message display

  Right. Yes, Hello and thanks in advance. I have a ThinkPad Yoga 14, put far and run the latest version of Windows 10 64-bit edition. First of all, I must point out that this question could not be a problem with the incompatibility of the app all Lenovo apps and programs that work, LSC however seems to be throwing a strange error. It was displaying the same error message from a time of upgrading to W10, this question was not present in W8.

  Under system, I get a critical warning to the software update and it says:

  "Windows Update".

  You never updated Windows

  Status: expired

  Last update: not available

  To update your operating system, you must run Windows Update.

  [Launch] »

  Curiously, no amount of click on the launch button will actually launch wUpdate. And that's all. I have already received, downloaded and installed a dozen updates to day and the message is still there. On another post here on the forum I read I would get this error if the value has not been updated to download and install automatically, but I have not changed the update settings. Everything is automatic. Installation, download, everything. Any ideas?

  Mod edit: System model added to the subject line to improve visibility / clarity

  https://download.Lenovo.com/pccbbs/thinkvantage_en/lscsetup_x64_31001.exe

• How to filter messages displayed

  I'm used to be able to filter the messages that I have a display by the printer model. This feature seems to have disappeared. I didn't want to have to browse the pages of messages twenty other printer models to problems that are not for my model. He has been a research field that offers the ability to search only 'on this forum. I could enter my model number and see all of the messages on my printer only. Beautiful star - bring it back.

  The upper-left search box that says "Research community" default actually looking for the forum, in that you are.  If you pass a level it searches in all printers & all-in-one forums, and another level, it would be searc all of HP consumer forum.  You can also enter a search term and click OK.  You will then have an additional option, including search by author, date range, including forums, of messages with congratulations, positions with Accepterd Solutions and other elements.  On this page, you can also click on advanced and more options.

• cartiadge error message display refer to the device documentation totrouble shoot

  HP officejet j3500 series all-in-one sir I Bay an orginel hp 702 cartriadge onl 50-60 copy cartriade error will be now display refer to the device documentation trouble shoot it please thanks replay

  Did you buy printer and then move to another country? If so, the only way to fix is to contact technical support.

  Cartridge error message.

• Error message "display driver has failed but has now recovered.

  I received a message on my PC saying "display driver has failed, but has now recovered," I got a black screen when it happened.  Does anyone know what this means?

  Jack

  It is more informative than an error message.  If she does not recover, it would be a problem.  You may be able to solve it by installing the latest video driver available.

• BlackBerry Smartphones SMS message display

  Hello

  I have a new Pearl 8120, when SMS messages dispalying from people in my contact list the header shows the number moblie of the person sending the message. How can I get the display to read the name of the contact of the person if it is already in my address book?

  I tried everything :-(

  Thanks in advance

  You are welcome. I'm glad that it worked. Can you please solve this post so that others can find a possible solution to their problem. Thank you.

• Error message: display driver stopped responding and has recovered

  Original title: I get an error message of...

  I get an error message... display driver stopped responding and recovered... then I get also get with her driver Intel Graphics Accelerator Driver for Window display 7 (7) is not responding and successfully recovered. also sometimes the screen just flickers...?

  Thanks for your help!

  Try to download the latest driver for your graphics card.

• Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

  Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

  Hiya,

  I have recently installed Windows 8 Pro, installed all of my usual applications etc..
  The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
  "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
  Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
  I can't find a way to properly uninstall the graphics driver.

  At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

  Hi guys,.
  Looks like this isn't just me.
  Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
  Information system;
  Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
  CPU: AMD FX-8150 eight physical cores
  GPU: ASUS NVIDIA GeForce GTX 560 TI
  Main hard drive: OCZ Vertex 3 120 GB
  It may be useful
  Edit: Still not falling down, 11/02/12, 4 days
  
  
  New edition;
  
  
  If you still receive the error message, try the following steps;
  Has. try to perform a clean installation of the driver.
  Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
       
  
  You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
  B. close all other programs
  It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
  You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
  More information can be found below
  http://support.Microsoft.com/kb/2665946/en-us

• Error message displayed twice

  Hello

  JDev 11.1.2.4

  I have an inputText with a custom validator

  	< af:inputText value = "#{bindings.pPassword.inputValue} 'simple required ="true"="true""
  	Columns = "#{Bindings.pPassword.hints.DisplayWidth}" maximumLength = "16" "
  	shortDesc = "#{bindings.pPassword.hints.tooltip}" id = "it1" secret = "true" = "true" autoSubmit "
  	Validator = "#{pageFlowScope.ChangePassword.validateUserPassword}" > < / af:inputText >

  The validator is called when I leave the inputText only ONCE as expected. But when it is in error, the inputText is marked, and the error message is displayed twice like this:

  Messages for this page are listed below.

  Missing a digit

  Missing a digit

  The code of the validator:

  	{public Sub validateUserPassword (facesContext, UIComponent uiComponent, FacesContext, object)}
  	System.out.println ("Validate");
  	Password String = object (String);
  	At least a check digit
  	m = regexAtLeastOneDigit.matcher (password);
  	If (! m.find ()) {}
  	System.out.println ("a figure is false");
  	FacesMessage message = new FacesMessage();
  	It's one that is displayed
  	message.setDetail (the "a missing digit");
  	message.setSeverity (FacesMessage.SEVERITY_ERROR);
  	facesContext.addMessage (uiComponent.getClientId (), message);
  	throw new ValidatorException (message);
  	}

  Why appears twice?

  Thank you

  The first is to call you

  facesContext.addMessage (uiComponent.getClientId (), message);

  and the second because you throw one

  throw new ValidatorException (message);

  with the same message that the framework adds the messages of faces again.

  Timo

• Using Custom Component error MEssage display

  Hello
  
  I built the custom component to validate the size of the file and the file Extension.
  
  That is, user should be able to check in the document if the size is less than 5 MB and the file extension is one of the "png", "tiff", "doc", "Pdf".
  
  Here, whenever validation files I'm throwing the exception "Type of file file size exceeds the limit or not valid.
  
  I am able to get the custom component of work according to the validation. And is alsi recording the error in the log file.
  
  But I need to show the error message when the click the user on the button control on the page of the Complutense University of MADRID.
  
  From now on, it shows a generic error saying "cannot perform the function validateStandard and service CHECKIN_NEW_SUB.
  The error was caused by a problem generated internally. The error was logged.
  
  Any help on this is much appreciated.
  
  Kind regards
  Helen Shetty.

  Hello

  You can throw a ServiceException in your filter with the message you want to display.

  Roman.