multiple processes on unix Server replicate judgment, is that block the port?

Similar Questions

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available

  a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available

  Check if you have picked up malware in your travels.

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

  Check in safe mode.

  Vista advanced boot options
  http://Techblissonline.com/Vista-advanced-boot-options/

  See if you can isolate a possible cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Hello

  2796614 wrote:

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Of course, it is possible.  According to what the text file looks like to, you can create an external table that treats the text file as if it were a table.  Otherwise, you can always read the file in PL/SQL, using the utl_file package and INSERT of PL/SQL commands.

  You have problems whatever you wantt?  If so, your zip code and explain what the problem is.

  Whenever you have any questions, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the exact results you want from these data, so that people who want to help you can recreate the problem and test their ideas.  In this case, also post a small sample of the text involved file.

  If you ask about a DML operation, such as INSERT, then INSERT statements, you post should show what looks like the tables before the DML, and the results will be the content of the table changed after the DML.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

• How to use multiple cameras in same model for mirror (if that's the only way)

  Hi all

  I am creating a shot where the camera pans on a range of objects on the table which is a mirror. Now, I want the reflection in the mirror to move when the camera moves just like in real life. But I can't understand how do. a technique that I've imagined is to create another device and place it on the surface of the mirror and then have somehow connected to the main camera so that it records the image while moving the way ray of light will react on the main camera. later, I can make that camera mirror to place videos in the model so that it looks like a reflection on the other hand. But then again, I don't know how to establish that, as I don't know how I can connect a camera with the main camera that also reacts to the movements of the cam as a reflection of the light. Is there any expression for her? Help, please.

  Thank you.

  Here is a version of CS6 project: reflections (CS6) .aep

  It's corrected workflow

  • In the model of the hand, make sure that the mirror of anchor point is in the center of the layer and the scale is 100%
  • In the project Panel duplicate the model containing the 3D scene
  • Rename duplicate reflection
  • Open the model of reflection for editing
  • Here is where the fun begins. Select the lights and the 3D layers and their parent to the mirror
  • Make sure that Local axis mode is selected in the toolbar
  • Select the rotation tool and make sure that it is set on the direction
  • Move the cursor on the y-axis of the mirror, hold down the SHIFT key, and rotate the x 90 ° mirror (should be the 4th snap)
  • Select the scale property of the mirror layer by pressing the s key
  • Disable the locking of the scale, then set it to x-100% scale
  • This should reverse the lights around
  • Divide the timelines and reveal the position of the cameras properties
  • Add an expression to the camera position of thinking Comp by Alt/Option click on the stopwatch, and then drag the pickwhip to the model of the camera hand Position
  • Nest the Comp "reflection" in the original model and condense the transformations
  • Make a duplicate of the mirror layer and use it as a track matte for the model of reflection
  • Set the properties of the layer of mirror to get the final look wanted by using as an adjustment layer or change the material options or specular blend modes to pick up

  That should do it.

• The view connection server connection failure - and that's it.

  Hi all

  I use a box of 10 Windows with Horizon View Client 5.4.1. Our connections are enabled smart cards. When I run the view of the Horizon, I get the login server and hit connect. I am asked to choose a certificate; I choose the right pair, enter my PIN and then get an error message saying "connection to the view connection server failed." And that's the entire message. When I choose the right certificate, get "the connection to the view connection server is not. " No user could not be found for your certificate." That tells me that it's to reach the server, but without more info, I can not find the problem.

  I opened a session with a view to the Horizon with other machines and can I use my chip card with other sites on this computer. There are ports should I open to view Horizon? What else can I try?

  I started poking around outside the view of the Horizon and found the problem, I'll leave it here in case anyone else has this problem. I had to go to Internet Options-> content in-> certificates-> Select Certificate-> advanced and enable authentication of the Client.

• Load the XML data to the UNIX server directly to Tables of database relational

  Is there a way I can load some data from an XML file in the Oracle Tables, without going through the input file XML in a directory of the Oracle server. My XML file resides on the UNIX application server. And I need to load the data directly into database tables. Without load them into the database directory.

  
  

  Also, I'm looking for a solution that would not load my database much and affect other processes running. Can be done using SQL Loader?
  

  
  

  Oracle database version: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  

  Thanks for the companions of answers!

  There I helped to learn a lot of options.

  But the easiest using UNIX server that worked for me was to use an XSLT transformation to convert the XML file to a delimited file. (Load the unix server, save the Oracle resources).

  UNIX 'xsltproc' feature was not a bad option.

  Then use SQL Loader to load into tables.

  Bravo!

  Rahul

• Transfer files from UNIX server to the Windows server access path

  Hello Experts, (Gud Gud same backward and Gud Mor)
  
  Is there a way to transfer files from UNIX (Oracle database) server, to Windows server? AFAIK if path of Windows. I am able to read the file because it is on the server, but it does not recognize the Windows directory at all.
  
  If you can share documents around this study, I will be grateful.
  
  Kind regards

  You can download this PL/SQL package to FTP in PL/SQL. It is old, but still needs to do the job. Do not forget that in 11g, an ACL must be created to allow the code to access the network.

  An alternative is to a Unix script ftp script and run (as an external process) using DBMS_SCHEDULER.

• urgent: cannot startup the database to unix Server

  Hi... I am facing a problem treamendous...
  
  to stop the database (unix environment), I connected through Putty and from there to the opening of session sysdba, I gave the command "SHUTDOWN IMMEDIATE.
  
  but after it all of a sudden the power outage occurred and my local computer where access to the unix server, I got the closure...
  
  After the reboot, when I go again Putty and connected on the server and login sysdba, oracle11g given the command, ' OPEN ', then it shows error...
  
  SQL > startup open
  ORA-10997: another start/stop operation this instance InProgress
  ORA-09968: cannot lock file
  Linux-x86_64 Error: 11: Resource temporarily unavailable
  Additional information: 29770
  
  
  Please help... its very urgent...

  sqlplus
  / as sysdba
  the judgment
  startup
  output

• PDF empty created during the export of the BLOB to PDF on the unix Server

  Hello

  I'm trying to export a blob of DB and write in a PDF on the unix server. But what I get is a blank pdf on unix server.

  Any idea?

  My code is as follows:

  CREATE OR REPLACE PROCEDURE write_to_file ()
IS
v_cn_letter_name      VARCHAR2 (100);
v_buffer              RAW (32767);
v_amount              BINARY_INTEGER := 32767
v_pos                 INTEGER := 1;
v_blob_len            INTEGER;
v_file                UTL_FILE.FILE_TYPE;
ftp_fldr_loc_i        VARCHAR2 := '/devl/apps/my_dir';

  data_to_write         BLOB;


  BEGIN
v_cn_letter_name := 'MyLetter.pdf';
BEGIN
  SELECT cnsmr_letter
  INTO data_to_write
  FROM my_table
  WHERE letter_emailed_ind = 0;

EXCEPTION
  WHEN NO_DATA_FOUND
  THEN
  ent_logging_pkg.handle_exception_prc
  (SQLCODE,
  SQLERRM,
  'No Records for letters');
END;

  BEGIN
v_blob_len := DBMS_LOB.getlength(data_to_write);
-- Open the destination file.
v_file := UTL_FILE.fopen(ftp_fldr_loc_i, v_cn_letter_name, 'WB', 32767);
WHILE v_pos <= v_blob_len
LOOP
  IF v_pos + v_amount - 1 > v_blob_len
  THEN
  v_amount := v_blob_len - v_pos + 1;
  END IF;
DBMS_LOB.read(data_to_write, v_amount, v_pos, v_buffer);
UTL_FILE.put_raw(v_file, v_buffer, TRUE);
utl_file.fflush(v_file);
v_pos := v_pos + v_amount;
END LOOP;
-- Close the file.
UTL_FILE.fclose(v_file);
EXCEPTION
  WHEN OTHERS
  THEN
  IF utl_file.is_open(v_file)
  THEN
  utl_file.fclose(v_file);
  END if;
  ent_logging_pkg.handle_exception_prc
  (SQLCODE,
  SQLERRM,
  'EXCEPTION WRITING TO FILE');
END;
END write_to_file;

  How do you open the pdf in unix (or linux) server, which is the operating system on your database server? Maybe it's to do something with the tool that you use to open the pdf, I remember some problems with opening the Toolbox open office

• How to determine the Oracle Max process on Windows Server settings

  Currently I have Oracle 11.2.0.1.0 running
  Windows 2003 EE R2 SP2 x 32
  
  The issue now is:
  
  How to determine what is the maximum value that I can set the process?
  
  I guess that's the operating system and hardware dependent, but I can't find documentation on this topic.
  
  Any help is appreciated.
  Jason Longenecker
  
  Published by: LONGENECKER on May 13, 2013 11:33
  
  Published by: LONGENECKER on May 13, 2013 11:36

  We shouldn't just work the PROCESS parameter for the maximum number of BONES.

  More processes that you have, more will consume PGA the oracle Instance, i.e. more memory will be used on your server.

  You should check v$ resource_limit see if it really reached setting TREATY limits, if yes increase the parameter appropriately so that the high tide of use remains about 80% of the value of the parameter. Check if the number of sessions dedicated process is really necessary, otherwise you can consider the use of database resident connection pooling or a shared server or tuning configuration opening less sessions on the database.

  Depending on how much you increase, take a look at the view of PGA advice after a workload of the cycle of V$ PGA_TARGET_ADVICE and V$ MEMORY_TARGET_ADVICE.

• How to connect to sqlplus in unix Server

  Hi masters.
  
  Little info. requried... I worked on oracle with windows CA. But I don't know unix exp. My question is
  
  I want to connect to sqlplus in unix Server? Please let me know...!
  
  Thanks to the adv.
  
  concerning
  SA

  Sqlplus username/pwd@servicename;

  You can find details of service name in file names tns instead of unix. If you are not able to find and then type cd $TNS_ADMIN at the prompt of unix command, then ls - lrt tnsnames.ora
  You can also cat this file to display.

  See you soon
  Lionel

• How can I index PDF files that reside on a Unix server?

  I was amazed the week last to discover that our Web site does not support PDF research opportunities. Apparently, we're going to get it soon. But when that day comes, I think we need to index our PDFs. I know I can do it for a Windows Server. But, how can I do to a Unix server?

  Thank you

  Peter

  No, not at all. "Indexing" is a stange inconsistent term used for this connection. I guess you really want is a search engine that includes PDF as HTML content. The term 'indexing' might mean 'account with all the text in a file and the addition of words available for research.

  Acrobat uses "Indexing" to mean precisely creating a set of files used by Acrobat itself to find several PDF files. But it is a thing of local file, not a web thing. In this way the indexing of PDF files must be used on the web is bad, but also not good.

  There are two main approaches to web search engines.

  1 premises. Software runs on the local computer and can read the files on the web site. In fact a kind of file, may be called an index. Local software on the web server uses this information to display that you lead.

  2 remote connection. Google is a prime example of this. Visits of the websites ("spiders") to play the files, made his own 'index' and the research on the sites.

  Google (and other search engines) are often seen only as a means of the world wide web to research. But they can be used to search for single servers in their list of everyone, as in https://www.google.co.uk/search?q=indexing+Pdfs+site%3Aadobe.com

  An interesting variation of what was for sale a few years ago, is the "google appliance" for use on private networks (intranets). He was sitting on the local network and done things like google but only with the local network. Then, there was a 'local google' for all local machines.

  One last thing: your customers are not likely to find satisfying if she must search for PDF files and the HTML format of research with a different engine.

• access to / Apex unix Server pdf files download

  Hello
  I am struck with another big challenge here. There's a system that creates tons of PDF files on the oracle UNIX server, then these files are loaded into oracle as a data blob table. Now the Apex ive page which provides links to these pdf reports and allow users to download and save locally in their systems.
  Now, my biggest problem is that when the files are created in the directory of the UNIX server that is mapped to the oracle directory object when you open these files/download of Apex they are corrupt and cannot be read. Is there a way pdf files can be directly loaded into oracle as BLOB table without using the oracle directory object... any suggestion/solution to this problem please?
  Oracle 11g & Apex 4.1.1x

  This approach is going to be good in this scenario but look at this simple code under iam having error (no data found) with get_pdf(), but I know a file is created and can be stored in the directory, what could be the problem here in this small code?

  create/replace the Create_pdf procedure
  as
  pdf_files blob.
  Start
  pdf_writer.init;
  pdf_writer. Write ("test report '");
  pdf_writer.save_pdf;
  pdf_files: = pdf_writer.get_pdf;<=====no data="">
  Insert a blob into table
  end;

  When you use get_pdf, you must also call to save_pdf. Simply remove this line and it should work:

  procedure create_pdf
  as
    pdf_files blob;
  begin
     pdf_writer.init;
     pdf_writer.write('test Report');
     pdf_files := pdf_writer.get_pdf;
     //insert blob into table
  end;
  

  -Morten

  http://ORA-00001.blogspot.com

• B2B attachment filename having the space to the UNIX server.

  Hello B2B gurus.
  
  I'm working on B2B for Rosettanet.
  
  It also sends attachment picked on UNIX server as well as the payload of PIDX format.
  
  If the name of the file in the UNIX server has a space, Rosettanet with room attached error
  
  B2B-51570-
  News of the machine: (hou - ecmsoatst01.swn.com)
  Description: Error of attachment
  
  If the file name does not have any space, the logic of the attachment works file.
  
  I used the below referral link, which was really helpful to the logic of the attachment.
  
  http://Anuj-Dwivedi.blogspot.com/2011/04/RosettaNet-attachment-handling-in.html.
  
  Can someone help me manage the file name with space in the UNIX server to send as an attachment.
  
  Thank you
  Sunil

  You can try to escape from the space with %20? For example if the path is file:///b2b leader/OrderBill.pdf then as file:///b2b%20file/OrderBill.pdf

  Kind regards
  Anuj