multiple screen problem

Similar Questions

• Satellite Pro P100 - multiple display after Exchange screen problem

  My laptop: Toshiba Satellite Pro PSPA6A-028017 with Nvidia GeForce Go 7900GS

  OK, here's the story. I turned on my laptop about a week ago and the screen is blank. I plugged in a monitor external via AVI and tried Fn + F5, but nothing. When the computer reboots, the external screen worked. When I tried to turn on/off displays the external monitor is turned off and I found myself with an empty screen - I was obviously spent on screen of the laptop but working blind, I couldn't work out how to get the external monitor to start again. FN + F5 did nothing.

  At that point, I called Toshiba for the support of the warranty (on-site, next business day). They had a technician with new monitor/display on site the next day (after a few calls me to follow up). It has replaced the screen but struggled to lift the screen up and running. He finally managed to logon Windows safe mode and get running but only display on 800 x 600. It has updated the Bios and drivers. He could then up to the 1024 x 768 resolution. Highest and the screen would be left empty.

  At that time we plugged in an external monitor via VGA. It worked, but the technician couldn't get the each display to run on each resolution. He left him speechless and he acknowledged that things still are not good. Later, after that the technician had left, I managed to get views working so each to their own resolution. However, I could not always connect the external monitor via DVI (VGA only). I was at least temporarily to work!

  The next morning that I turned the laptop on to find that I was back was started. No display on the laptop and on the external monitor only low resolution. It seems that the external monitor is simply cloning which should show the computer screen.

  Under the display properties > settings the display shows:
  1. (multiple screens) on NVIDIA GeForce Go 7900 GS
  2 Dell G2410 (Analog) on NVIDIA GeForce Go 7900 GS

  I know that when everything is working properly, he said not many monitors. The only screen I see is the Dell external monitor. And when I identify the Dell screen is no 1, even if it's not listed number 2.

  I don't know anything about the cards video etc, but a theory I have is that adapter is defective and is only show the analog signal. That is why I think that the screen of the laptop and external monitor (connected via DVI) works not done the external monitor connected via VGA (but it seems to be imitating the screen of the computer, allowing only the laptop screens range of resolution). Is that possible?

  Someone at - it ideas? The problem is likely to be the video card? I'm puzzled. I'll have to get the technician on the spot back (which will probably still 2 days and several calls, follow-up) and I don't want to lose any time. I have a business to run and I have now lost a weeks work already. If I can offer some strong theories before the technician comes on the spot, sometimes we can get parts ordered in advance.

  My warranty expires in a few weeks, so obviously I want this fixed correctly in the shortest time. I don't want to wait 2 days for a technician to come and have to wait another day or two for parts.

  Help, please!

  Thank you
  Ghjghj

  It is not easy to offer the correct answer and explanation why this happens here on the forum. In laptop cases should be tested with diagnostic tools to ensure that what is the problem.
  OK, exchange of display was a step in the right direction but, of course, this question is more complicated and doesn t happen due to the defective screen only.

  I agree with Akuma and also thinking that there must be a hardware problem on the motherboard. Before the expiration of the warranty, you should contact the service again and let check portable equipment.
  The fact is, if there is that no book of hardware malfunction should work fine preinstalled with delivered recovery image (Toshiba CD/DVD recovery facilities).

  Please, don't wait too long and contact ASAP. They check your laptop. the warranty is still valid and your laptop needs to be repaired.

  Good luck!

• IPhone screen problems 5

  I have an iphone 5 with screen problems.  When the phone turns first of all, I can't drag the screen to enter my security code.  The screen is blank.  It will take several times before it stand for a long time, just enter the code.  I also have problems with the original key.  I downloaded the virtual home key, and I'm sure now.  However, when the screen is blank, I use the key home, which does not always, to get it back again.  It's very frustrating.  I'm 1.8 GB for use available, my capacity is 12.5 GB so I don't think that's all. I use the cloud for storage of photos, etc.

  Hello. Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• 'New window' does work well across multiple screens

  OS X 10.11.3 (15 D 21)

  I have two monitors connected to my rMBP with Thunderbolt ports.

  To facilitate the description, I want hereby the two views under A and b.

  Assuming an application (for example, chrome, finder) window was launched in A display. So I want to open another window display B. I right click the icon in the Dock on display B and click on 'new window '.

  What I expected, it's a new window opens in view B because I clicked on 'new window' display B, but the reality is a new window always opens in display has.

  

  On the other side, the same operation between different spaces (desktops) has no such situation. New windows are open correctly in places where they are "printing".

  Is there a bug in 'new window' between multiple screens?

  Hello is.

  I understand that you are wanting to open new windows of applications on the screen that you are working on. It is perhaps because of the way in which several screens are managed. Revisit some information to get this working for you.

  When you open a new window of an application, it will open in the active view. Even if you have the dock on the other screen, look at your taskbar to see if it is translucent. If this is the case, then it is not your main screen and your applications will be opened on the main screen. See the image below for what I will speak about reference.

  

  Take a look at the article below for more information on the use of several screens. I know the article refers to the Mavericks, but the information extends to OS X El Capitan as features are concerned.

  OS x: use of several screens in Mavericks
  https://support.Apple.com/en-us/HT202780

  OS X El Capitan: connect multiple monitors to your Mac
  https://support.Apple.com/kb/PH22153

  Let me know if it helps.

  Take care

• Re: Qosmio G30 and green screen problem

  Dear friends

  I thing is interesting for any owner of Qosmio to look at this:

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/comment-page-4/#comment-130784

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/

  My Qosmio G30 is already dead, I got an estimate from the official service, to repair my qosmio costs nearly 600 pounds. Is a design flaw. Go on the internet.

  Interesting links! Thank you.
  I have to say then I must be lucky. My Qosmio G30 (German model) works well and without any problems

• On the Satellite 1800-921 black screen problem

  Hello
  My satellite 1800-921 has started to give me a black screen after I turn it on. It loads well, go to the desktop and then the screen turns white and I can't make it respond. We can just distinguish the dialogs on the screen so I don't know if it is a screen problem or things I see on the screen are just ghosts...
  It's a bit worrying!
  Does anyone else have this problem? So far, it seems to happen when I turn it on. Usually, I have to turn it off and reboot to get it back and then it works very well.
  Thank you
  Nancy :)

  Hello

  to the old series, it may be that the FL inverter is broken or damaged the tupe of backlight. In both cases, you can see the screen but without backlight!

  To differi if it is a hard - or software error, you should start the laptop and ESC immediately to enter the BIOS. Then the machine must be running half an hour in the BIOS. When the rupture occurred it is quite sure that some hardware is broken. Otherwise, it is a software based and a restore with recovery CD Toshiba should solve the problem!

  Goodbye, TOK

• Computer screen problem after you download the update from Microsoft Windows

  My computer screen appear stained in colors like "shattered windshield appearance" after download Microsoft window update for the hardware called, ATI Technologies, Inc. - Video - ATI MOBILITY RADEON 7000 IGP. I downloaded this after my computer recovered from a serious error (according to the message) that push me to send an error report. He advised me to download the update custom as indicated above.

  Later, I noticed the screen problem. Can someone help me please on this issue?

  Can you please reduce the OS to an earlier time using System Restore tool and check if this problem has disappeared?

• Satellite A210 PSAFGC - Bios Update to get rid of the white screen problem

  I also have the white screen problem and I would like to update my bios to version 1.30, it came with.
  The problem I have is that I have a number of room A210 model PSAFGC.
  Support bulletin 98082422 for the update of the Bios does not have my room exactly number and I can not find something for my model.
  The 2 updates are at 1.70 and 1.90. I read the text of these two, and they seem quite different.
  Don't know what to do. Here is the info of the bulletin.

  Resolution:

  Update the BIOS of the computer to resolve this problem, by clicking on the link in the following list for your computer model.

  -Satellite A210 / A215, Ref. PSAFGU: BIOS version 1.70
  -Satellite A210 / A215, Ref. PSAEGU and PSAELU: BIOS version 1.90
  -Satellite Pro A210 / A215, Ref. PSAFHU: BIOS version 1.70
  -Satellite P200D / P205D, Ref. PSPBLU and PSPBQU: BIOS version 1.40

  REF. of the computer it is printed on a label on the underside of the case.

  Any help?

  Hello

  The Satellite * A210 PSAFGC * series seems to be a Toshiba * Canadian * series and I would recommend checking the Canadian driver Toshiba page if you want to download the compatible BIOS for your laptop.

  Here is the link to the page:
  http://support.Toshiba.ca/support/download/ln_bymodel.asp

  Best regards

• Blue and black screen problem

  I have the blue and black screen problem. I want to format my C drive, but he said no, that you can not format this drive. I know that I have Virus problem also and I want to format anyway. Please help me.

  Thank you

  Hello

  ·         What operating system do you use?

  ·         You get the error message?

  ·         You are able to boot to the desktop?

  Method 1:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

   

   

  Method 2:

   

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

   

   

  Method 3:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• TouchSmart IQ506 touch screen problem

  Our company has recently obtained a TouchSmart IQ506 with Windows Vista 64 bit and everything works fine. We did a cool, been reformatting in the network and ran all the updates and others. As you may, or may not, know, the IQ506 isn't a VGA port to install a second monitor or to connect to a projector, so that to use the TouchSmart mirroring an image to the projector, we bought 2.0 of StarTech USB to VGA Display Adapter. I installed the drivers and got work and mirroring the image properly, however, now I'm having a problem with the touch screen.

  The touch screen responds when I touch it, but that the pointer is emptied all the way to the right. Mouse follows my pen up and down with me, but it does not come to the left. It's as if the screen is only read the coordinates there where I touch, and coordinates x are blocked all the way to the right.

  The touchscreen was working perfectly fine until I installed the graphics card driver and software for the VGA display adapter to work. The keyboard and the mouse works fine, everything is perfect except for this touch screen problem. I'm 99% sure it's a software problem, and I wanted to know if there is a known issue, or if anyone else has had this kind of problem. I guess this is the software for the VGA graphics card and I was wondering if this is the case, what I can do for the TouchSmart can support a second screen bypassing screen touch, or any other, problems of alternatives.

  Sorry in advance if there is already a topic on this issue, I went thorugh the forums and can't find anything about it.

  RasterBlaster thanks for your comment.

  I wanted to try something before your steps and I seemed to have solved the problem.

  The problem is that the nvidia card driver was not cooperating with startech to the VGA graphic card driver. I uninstalled the nvidia card driver and all this work and am now able to see on both screens.

  I know I'm going to miss some qualities of video, but from now on, everything works and I think it's what is best. I will try to reinstall the graphics driver, but right now, the problem is resolved. Thank you.

• Windows 7 blue screen problems

  Windows 7 blue screen problems is so frustrating. The blue screen of death or BSOD because it is often called. I need help...

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
  so time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
  Details of all application crashes occurred in your system. The information of the plant are extracted
  the .wer files created by the Windows Error Reporting (WER) of exploitation component
  system each time that an accident has occurred. AppCrashView also allows you to easily record the
  list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Spots screen problem N200 swxga

  I am confused with my screen problem and need advice.

  Problem:

  Vertical line on screen

  Shimmering badly centered graphics

  Have changed the LCD twice

  Changed the inverter and video cable

  Latest BIOS. Memory OK

  Screen on normal VGA fixed and functions of the laptop normally when using the resources intensive applications.

  Where should I go from here?

  Ray

  
  

• Fixed with Windows 7 black screen problem?

  My HP Pavilion dv2000 is having the dreaded black screen problem.  I figured out how do boot mode safe and backed up all my files.  Now, I'm ready for this ongoing problem (hopefully).  My other laptop HP running Windows 7 never had the problem of black screen.  So, upgrade to W7 will fix this problem?

  You should not pass the operation when it does not work properly. You can make a difficult to solve the problem, unable to be resolved.

  Have you tried last known good configuration or safe mode?
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Please note that the problem may be with the hardware and not the operating system.

• Windows 7 blue screen problems, please help me

  Hey guys, I'm using windows 7, my laptop these past two weeks have blue screen problems. When I boot my laptop, and I use internet after some cell time but I have a blue screen with MSG (Message Details: to your computer. igdpmd64.sys PAGE_FAULT_IN_NONPAGED_AREA)

  If this is the first time that you have, "

  Please help me, there are the details:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  
  

  BCCode: 50

  BCP1: FFFFF8811C177B60

  BCP2: 0000000000000000

  BCP3: FFFFF880067A5A18

  BCP4: 0000000000000005

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  
  

  C:\Windows\Minidump\042414-20155-01.dmp

  C:\Users\manjeet varsha\AppData\Local\Temp\WER-37752-0.sysdata.xml

  Read our privacy statement online:

   

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\System32\en-US\erofflps.txt

  Here is an article describing how your problem may be related to a bad Windows Update.

  http://www.InfoWorld.com/t/Microsoft-Windows/Microsoft-pushes-another-botched-automatic-update-213802

  KB2670838 update uninstall can solve the problem for you.

• Use a BitmapField to multiple screens...

  How can I add a LabelField in multiple screen.

  his gift of illigalexception.

  even I want to dynamically set images on a BitmapField() in a static way.

  But his rising illigalexception in both cases.

  You cannot add a field twice. is there a reason why you would want?
  If you divide your level of data and user interface, you can load bitmaps into your class of data once and reuse it for each bitmapfield you create.
  or you can pass multiple screens using several officials, with a fixed part of the screen remains the same.