Cannot find device 9163 using DAXmx 9.1.7
I'll put up the NI 9237 (for strain gauges) module using series C Ethernet ENET-9163 carrier.
I installed DAQmx 9.1.7 which must contain the correction of the impossibility of finding the device when other USB devices are installed. (I have an HP desktop with the mouse USB, keyboard, etc., always under Windows XP SP3)
When I run the Explorer measurement and automation (Version 4.7.0f4) and ask network devices to find NOR-DAQmx, nothing appears. The troubleshooting steps in the Getting Started Guide OR-DAQmx for NI WLS/ENET-9163 aren't useful. (I do not have a static IP address for the 9163, that's what I want to put in place; I do not have a DHCP server)
I created a 2nd ethernet connection on this computer using the Cables to Go USB 2.0 to Fast Ethernet Adapter, what struck me ServerD in many other projects for the creation of a private network to operate the data acquisition equipment. So I think that ethernet itself is fine.
What should I try next?
I did a factory reset, so it wasn't the issue.
I finally got to DAXmx 9.2.3 which has much better help text to put in place.
In my network setup where I have a separate private network, I had to use to allow it to choose an automatic IP address setting. (Normally I have created my own private, without DHCP ip addresses). Once I did it, and using 9.2.3 (I did both at the same time), I could find the 9163 and give him my own static IP address.
Then I turned on the network connection to fixed static and reconnected to the map now with its own static IP address on the same subnet as the network card.
So, all is well.
Tags: NI Hardware
Similar Questions
-
Cannot find device write VMware esx server 3i image support to.
Hello
I'm fairly new Virtualization.
I downloaded: VMware ESX Server 3i Installable U4, Refresh Version 3.5 Update 4 | 153875-30-03-09 on the site and it burned on a disc. at the start of the disk and following the instructions in the installation guide, I get the following error:
The installation operation failed!
The installation operation has encountered a fatal error!
Cannot find device write VMware esx server 3i image support to.
The following system information will help the forum of VMWare support with your problem. Please note the information before proceeding.
Information System
Manufacturing: abandoned
Model: abandoned
Service etiquette: abandoned
BIOS Rev: SGP4510H.06A.0083.2008.0819.1026
OK, I can tell that you are new to this sort of thing, using windows XP, it is the best guide I have found for you should you walk through all the way.
http://www.Symantec.com/connect/articles/how-create-your-own-bootable-ESX-3i-USB-stick
-
I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. Restarting my computer did not help. Because I had this problem I also noticed that all my favorites that I had copied in Windows Internet Explorer also disappeared. I use Firefox as my main search engine and usually do not use Internet Explorer. I am running Windows 7 on my machine.
Try this add on the profile folder
-
I recently bought a new computer running Windows 7. I was able to use the ScanWizard 3700 on my old computer that worked on Windows XP. I have installed the Scanwizard software, checking compatibility, and he said: 'no change necessary. " But... I can't use it, I get an error message "cannot find scanner, scanner using the probe...". "The probe scanner can not find the scanner either. I see that other people use ScanWizard on Windows 7 without any problem. Anyone have any ideas why I can't make it work?
Hello
The Microtek ScanWizard 3700 is not compatible with Windows 7.
http://support.Microtek.com/downloads/bymodelname.phtml?srch_in=&AXN=2&slct_mdl=6
Download and install the Windows 7 compatibility-mode drivers and check.
Make older programs in this version of Windows (Windows 7)
Hope this information helps.
-
Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all programs of cloud 2015 but not PP2015. When I got this error, I had a mid-2012 Mac Pro running El Capitan 10.11.2 and an Apple ATI Radeon HD5770. You can't update the drivers with Apple, but El Capitan should have giving me the latest video drivers.
First try to open but after loading everything it errored out with the "can't find a video playback device adapted." A very cryptic message in my way of thinking. They mean the monitor, video card or what? In any case, I decided that I must have my video card, so I bought a 4 GB Nvidia GTX 970 MacCards.com card, put it in and got the latest drivers for it, than MacCards.com current guard. This resulted in no gain. Always the same result right along with the exact error even after loading the PP2015.
I reinstalled PPCC2015 yesterday and it still loads but never opens and gives me the same error. I feel like even if I bought a new MacPro and reloaded all software CC, I'd still have the same result. Very depressed of not being able to run the software I pay for every month.
In the finder menu, click and hold down the menu REACH. That hold the option key and the library user will appear. Click on the user's library.
In this folder, go to preferences and find the adobe folder.
Right-click on the adobe folder and click get info.
In the permissions section, & sharing, there are three names.
Everyone should say read & write beside them.
Open the lock, turn all to read and write.
Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.
Then relock the lock.
Now, go to your OS hard drive and click on users, your user name, Documents.
Find the adobe folder there.
Right-click on the adobe folder and click get info.
In the permissions section, & sharing, there are three names.
Everyone should say read & write beside them.
Open the lock, turn all to read and write.
Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.
The lock, the lock again.
Wait a minute. Then launch first.
This fixed it for me.
-
Cannot find "SENT" mailbox using firefox android
I can't find my (inept) SENT e-mail inbox when I connect using Firefox for Android. However, I find when I use Firefox desktop.
I also find my Outbox when I log into my account Yahoo using Firefox for Android.Iinet called and they said it's a matter of Firefox Android.
Someone have an idea..? Thank you very much!
Is the same issue in another mobile (Android) browser?
Can you please put here a link to your mailbox provider, so that I can save all try too?
-
6 iPhone bluetooth cannot find devices
Hello
I have an iphone 6, and when I turn the bluetooth it finds not all devices and is locked on the search for devices.
No idea how to solve this problem?
What types of devices are you looking for? Are you sure that these devices are in discovery/torque mode? Were you ever able to pair a Bluetooth device with the phone? This support document contains some troubleshooting steps for pairing Bluetooth devices. Set install and use third-party Bluetooth - Apple Support Accessories
-
Satellite P100-347 cannot find devices with Bluetooth
Trying to get some devices connected through Bluetooth and I try to find the Bluetooth on a P100-347 district, but he isn't here. I used the BT stack on another machine and normally there is a Bluetooth Neighbourhood shown on the desktop, but not on my laptop.
I took a peek in the test system as well, but there is nothing there... where it is spent, and how do I get that back.
So I guess that you take on the 'interchange Information Bluetooth"which allows to Exchange files, vCards, and images with other Bluetooth devices. If so you can start it via the menu entry in the file of the Bluetooth program or by a right mouse click on the BT system tray icon and a selection of "Bluetooth information interchange.
Very old version also had an icon on the desktop for him. I think that it is version 3. Now, it is located in the District of normal network. To get him back on the desktop, you can do the following:
"- Mouse-right click on the Bluetooth-> Option... system tray icon-> Bluetooth information interchange-> click the radio button"Desktop"-> Apply-> OK.
That's all. -
Toshiba 46TL938G: my laptop cannot find wireless LAN using Intel WiDi
Hello
I have the Firmware of 46TL938G more recent (January 2013)
and a Notebook DV7 Intel N2230 with Intel Wireless Display support (latest updated drivers)The TV or laptop may not find connection to each other.
Anyone work?
What should I do?
Did follow the steps described in the manual user 60 page?
If this is not the case, check it!The user manual here:
http://www.Toshiba-OM.NET/LCD/PDF/English/TL938-4046-English.PDFAlso, you must ensure that your s notebook LAN card is Intel WiDi supported.
Make sure that you use the latest Intel INTEL PRO wireless and Intel WiDiHere another thread of this forum on the use of the Intel WiDi:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71343Your comments would be appreciated
-
Trying to install office jet Pro e-all in one. When go into my account to hpconected.com can't find the devices tab very frustrating and annoying. Should have been more simple.
IRHello and welcome to the HP support community!
peace3021 wrote:
Trying to install office jet Pro e-all in one. When go into my account to hpconected.com can't find the devices tab very frustrating and annoying. Should have been more simple.
If all goes well, the way you spelled the site above is just a typo. This is "hpconnected.com".
I just logged onto the site with my Tablet HP Slate 10 HD, and clearly, there are 4 tabs: home, Collections, Services and devices.
Don't know what to say, except try to clear your cache and cookies in your browser, and then close the browser, open and try again to load www.hpconnected.com !
Good luck!
WyreNut
-
I just my old Dimage Scanner. Can't find the original CD of suburb of program to start to use the equipment. Copies or original CDs out there, so I try to transfer my slides to .jpg?
If it is old, the CD wouldn't in any case for Windows 7.
Contact the Konica/Minolta support, but don't be surprised if there is none...
-
Just got a new Canon camera and upgrade PSE12 to 14 but have been unable to find in the software how the DLO or lens Corrections. Is this possible with PSE14 and if so, how?
GL2U wrote:
Just got a new Canon camera and upgrade PSE12 to 14 but have been unable to find in the software how the DLO or lens Corrections. Is this possible with PSE14 and if so, how?
No, the versions of ACR in elements have fewer features than full versions for Photoshop.
Lens correction is available in the editor, after the opening of the ACR dialog box.
Menu: Filter > correct camera distortion.
As a general rule, you can deal with the missing features of ACR in items using filters and tools of the editor.
-
Lenovo Y340 the camera no longer works cannot find device
It can installed, he worked all of a sudden, I get the error messages no devices found? Thanks John
It can installed, he worked all of a sudden, I get the error messages no devices found? Thanks John
If you believe that the equipment still works, try www.lenovo.com for pilots updated for your operating system. If the hardware itself is broken, a replacement USB device could be your best option. -
I'm trying to download a map of the flower garden and the media player stands up and says that it can not locate the codec used to compress the file. I have Windows XP Professional and service pack 3
You most likely need a Codec package for your video player. The codecare like translators who take the image video format and encode or decode for display in your favorite media player. I would recommend that you download and install the K-Lite Codec pack from here.
Download K-Lite Codec Pack
http://www.codecguide.com/download_kl.htmDownload the Standard or Full package to halfway to the bottom of the page. Download to your computer and run the program to install it.
-
Cannot find device USB-6216 Simulator
I'm trying to simulate the USB-6216. When I go to create the simulated pilot I don't see the 6216 as one of the options. Renault USB are in the range 92xx.
Thank you
Mark
Look under the M Series DAQ instead.
Maybe you are looking for
-
Hi all, for some reason that I'm not aware, when you open a new page in e-mail to write an email, that the contacts sidebar now appears with "All address books" as default instead of "Personal address book" which appeared. I tried looking through all
-
Why do I get an incorrect WEP key during the installation of my printer?
Product - specific document http://support.HP.com/us-en/document/c00772798 I worked for HP.
-
My xbox it said that all my friends are offline.
OT: friends. My xbox I told all my friends are offline, but I was just in a game with one and now we cannot talk
-
Why I don't receive in windows when I start my computer?
Recently, I lost internet because of configuration problems. Who is fixed and now I'm able to go back to the internet. But now, whenever I start my computer, rather than make the home and get into windows, I get a black screen that says that it is
-
My HP Officejet Pro 8000 printer will frequently offline.
I have an IMAC OSX Lion operating system (10.7.4). The HP printer utility says the printer is offline and disconnected. It seems to verify that the printer itself doesn't have a light indicating power is on. However, I checked the connections caref