Multiple server Instances VI
Hi all, I have to create multiple instances of a VI using VI server method. I put the 'incoming' of the VI client properties. If I call the VI client under the name sub - VI I can create N instances without any problem. But if I use the VI server method when it executes the method 'run', it gives me the following error:
1000 error node invoke in Server.vi
Possible reasons:
LabVIEW: The VI isn't in a State compatible with this operation.
Name of the method: Run VI
I know that I can't open multiple instance of the front panel of this way, but I should be able to run it. Look at the example attached.
Thank you...
You must pass the '8' for your open VI reference option. It called the VI reentrantly, so that the error will not occur.
However, how to call this way screw stops execution of the subVIs if the server ends. If you have to keep the 'alive' server or you must use VI models (* .lives) instead of screws
Another note: If you have the Subvi the value modal dialog box, you will lock the other windows of your application LV is accessible!
hope this helps,
Norbert
Tags: NI Software
Similar Questions
-
Hi all
I am facing the error when I open my ADF UI below. I had installed all the required patches on weblogic ADFUI and MLR - 6 patch for COE. It's the same error discussed in this thread -
but I think have everything installed the patched. Y at - it a particular fix that brings FrameworkFolder from 2.0 to 2.1.< 24 April 2015 18:11:26 IST > < error > < oracle.wcc.adf.logger.Exception > < WCC-ADF-10900 > < required feature is not enabled on the content Serv WebCenter
ER instance "Default". Feature: 'FrameworkFolders', at least level: 2.1
oracle.wcc.adf.model.WccException: WCC-ADF-10900: necessary feature is not enabled on the content server instance 'Default' WebCenter Feature: "setting
orkFolders's, at least level: 2.1
Kind regards
-Anand
I assume that you missed this step:
1. after changing properties of connection CRMI - save
Now comes the key:
2. Select the bean Select viz ADFConnections - operations - parent. Here, select Invoke.
The action is logged and persistent changes to the MDS repository on successfully executing step 2, otherwise the changes will not be saved and will be reset to restart the server after original values.
Now restart the servers of the ADF managed, test and report the results.
Thank you
Srinath
-
Hi Experts,
JDeveloper 11.1.1.4.0 version, Windows 7.
I installed jdeveloper 11g Studio Edition Version 11.1.1.4.0.
«I'm trying to start the integrated by weblogic server: start run instancei Server weblogic the next ERREURLa get, Server Instance may not start because the integrated Weblogic domain was built not log successfully.the as a result of info"D:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd ' C:\Users\aroy\AppData\Roaming\JDeveloper\system11.1.1.4.0\o.j2ee.adrs\CreateDefaultDomain.py «»
I tried searching but could not solve this problem.
Reinstalled Jdeveloper, formatted my system did not work. Different version of JDeveloper also gives the same error in my system.
One thing when I go to the folder structure, I can see the default domain contains only the config folder. The rest are missing.
Also, I have all the rights of administrator on all folders/subfolders. I can create a separate domain and run the weblogic. But I can't start the new instance of JDeveloper. I get the same error.
Thank you
Roy.
Also, what OS you are using? I had a similar problem under win8
-
I have install the content server and the user interface based on the document https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=234453819733758 & id = 1618305.1 & _afrWindowMode = 0 & _adf.ctrl - state = n0sjjwur9_25
But when I run the UI with success. but when I try to access the user interface. I got an exception:
< 11 August 2014 3:26:39 PM PDT > < error > < oracle.wcc.adf.logger.Exception > < WCC-ADF-10900 > < required feature is not enabled on the content server instance 'Default' WebCenter Feature: 'FrameworkFolders', at least level: 2.1
oracle.wcc.adf.model.WccException: WCC-ADF-10900: necessary feature is not enabled on the content server instance 'Default' WebCenter Feature: 'FrameworkFolders', at least level: 2.1
at oracle.wcc.adf.model.WccException.getException(WccException.java:424)
at oracle.wcc.adf.model.WccException.getException(WccException.java:441)
at oracle.wcc.adf.model.ConfigurationManager.getEnvironment(ConfigurationManager.java:1030)
at oracle.wcc.adf.model.ConfigurationManager.areRequiredWccInstanceFeaturesAvailable(ConfigurationManager.java:489)
at oracle.wcc.adf.vc.WccServletFilter.doFilter(WccServletFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.caching.filter.AdfFacesCachingFilterImpl.doFilter(AdfFacesCachingFilterImpl.java:116)
at oracle.adf.view.rich.webapp.AdfFacesCachingFilter.doFilter(AdfFacesCachingFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged (Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
is there only one had the same problem? or an idea of how manage it?
Thank you
Brilliant
Are you sure you properly patch?
You try to apply a patch WebCenter MLR oracle_common home:
Oracle home: \Oracle_CS\Middleware\oracle_common
I don't have the RLM 5 or 6 readily available readme, but I MLR4: it says:
2 pre-installation instructions
-------------------------------
a. set the ORACLE_HOME to ECM home environment variable.
The default location is: "[MW_HOME] / Oracle_ECM1".
You must read and follow the patch readme to make sure you are running the patch correctly and in the right place. Also, some patches have specific pre and/or post installation steps. You cannot go rogue on a patch process.
I hope this helps you
-ryan
-
Using a stand-alone WebLogic Server instance - ADF Insider issue
Hello
I just watched the [use a stand-alone WebLogic Server instance - ADF Insider | http://www.youtube.com/watch?v=yGSR6dwd3nw] video and I gave a try installing the WLS in my dev machine.
Unfortunately I can't see how to do a run/debug jspx page right click in the WLS newly installed and configured.
Note that the wizard will create a server connection Application under the radio button in the built-in Server displays "a built-in server can be started and stopped by JDeveloper. That applications can be deployed automatically to the server with the command run or Debug ... "but running a jspx always begin it pre-configured"IntegretedWebLogicServer"and there is no option to choose where to run from nor I see any configuration in the project properties.
Could you please give me the missing indication?
YiannisHello.
First of all, thanks for watching the video. To specify the server of an application will run on, simply open the application properties and go the the Run category. Then select the appropriate drop down list WLS forum link to the built-in application server .
Best regards
Frédéric.
-
Server instance cannot start because the Weblogic domain integrated
Hi all
I use the new version of Jdeveloper. IE 11.1.1.6.0. I get the error "The Server Instance cannot be started because the integrated Weblogic domain has not been built with success." whenever I try to run a page simple jspx.
Please someone help me.Hello
Welcome to OTN.
You can try the following.
1. close JDev.
2 remove the DefaultDomain file under your [url http://tompeez.wordpress.com/tag/system-folder/] file system.
3. launch JDev
4. run your jspx page.Arun-
-
Can deploy B2B &; B2C in a Server Instance.
Hello
We must prepare the proposal of b2b & b2b both. If we can deploy B2B & B2C stores in a server instance. If possible, what are the challenges we can get. If not possible, why not possible?
Thanks in advance
~ RajiYou can not run both in the same instance.
It is not possible.There will be only one path of config instance. If you load the module B2B it overrides B2C configs.
So, be it B2B or B2C.Peace
Shaik -
Doubt on single server multiple vs single-server instances several databases
Hello
Here is my banner for oracle:
Oracle banner:
Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE 11.2.0.1.0 Production."
AMT for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
When you use the dbca command, it creates a new database. So is it possible to have multiple databases at the same time running on the same server?
I tried this option where I had created 2 databases A and B both running.
He kept to launch ' ORA-12520: TNS:listener could not find a Manager is available for the type of requested server "intermittently. I have not found any useful document to solve this because of which I ended up recreate all objects in database B to the database A. Data Base A therefore has its own schemas and schemas from database B.
Below are examples of files tnsnames.ora and listener.ora, sqlnet.ora trying this option:
sample tnsnames.ora file.
A =.
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = A)
)
)
B =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = B)
)
)
Listener.ora, example:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc.com) (PORT = 1521))
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
)
ADR_BASE_LISTENER = C:\OracleDatabase
SQL Net.ora:
NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
ADR_BASE = C:\OracleDatabase
Lsnrctl status showed services for each database.
All the world is facing this problem? Can we have multiple databases on a server with a listener running on the same computer? So my Tnsnames.ora file would have 2 strings of connections and file listener with an entry of the listener.
Can you please share your tnsnames.ora and listener.ora files?
Also, how to create a single database with multiple instances on the same server? Please tell me about the document that contains an example of this.
Yes, you can have several databases (running different ORACLE_SIDs) the ORACLE_HOME even on a single server.
I suspect that the ORA-12520 error was the result of certain constraints of resources (cpu, memory or i/o) resulting in the inability to create a new database session.
Hemant K Collette
-
GoldenGate installation on a server shared with multiple oracle instances
Hello
If I have a shared server which has several occurrences of oracle running on it, should I install a GoldenGate by server or a GoldenGate instance?
I am referring to 11.2 GoldenGate on AIX/Linux/Solaris operating systems
THX
Delphine
I have always used just 1 Golden Gate Installation on a server with multiple databases.
-
CFIDE pointing to an incorrect server instance
I use the CF 9 Enterprise and have multiple instances (instance and server in CF 9 is sometimes used here - I find the server term to be ambiguous in this case) on the same machine. They share a directory (mounted as a virtual directory under the Web site) common CFIDE and CFIDE directories under \cfusion.ear\cfusion.war c:\jrun4\servers\ < servername > have been renamed.
Problem is the CFIDE two instances (the last two that were created) are pointing to the same instance (one last created). I've looked everywhere for a config that controls this but couldn't find anything.
So, when I go to:
https://cfadmin1/CFIDE/administrator/index.cfm and https://cfadmin2/CFIDE/administrator/index.cfm both sites have server: cfserver1
I need to know how to change the console cfadmin2 to point to the server: cfserver2
There are a few possible causes:
When the last instance has been added, the c:\jrun4\servers\cfserver2\cfusion.ear\cfusion.wa\CFIDE not renamed directory.
This seems to have caused cfserver2 to use the CFIDE directory instead of the commune. Rename the directory corrects this problem.
I noticed a few problems with the wsconfig.properties file, where cfadmin2 has been registered successfully, but i:
(1) removed from the instance of cfserver2
(2) the CF and IIS services are started and
(3) the cfadmin2 readded
to resolve this problem.
Also looked at the neo - security.xml and neo - runtime.xml from both forums files and have not found anything out of the ordinary
Now, I'm ideas...
The answer now (from another source)-the IIS Handler Mapping cfadmin2 site for JWildCardHandler pointing to the wrong dll.
Cfadmin2 is an IIS #8 site
In C:\JRun4\lib\wsconfig\wsconfig.properties, site 8 has an id of 6 CF.
"" IIS = 6, 8, false,
6.SRV = localhost, "cfserver2."
6.CFMX = true,
However, the news of JWildCardHandler has been pointing to the wsconfig for CF 9 id directory - which is a site in the cfserver1 instance.
(Internet Information services manager, click site, group by area, under IIS-> mappings, JWildCardHandler Edit)
C:\JRun4\lib\wsconfig\9\jrun_iis6_wildcard.dll
Change this to corespond with the problem solved wsconfig.properties info.
C:\JRun4\lib\wsconfig\6\jrun_iis6_wildcard.dll
All works now.
-
Multiple application instances
Hi all.
I built an executable from a Labview VI, which allows me to manage data.
The application allows me several lines of data type and save them in files pour which I create a personalized extension (registered in the registry database). From windows Explorer, when I double click on one of these files, Spear of my executable itself, and load my data. It works very well.
On the other hand, if the application is already running, I can't open multiple instances. Find it me so very difficult to compare the data from 2 different files.
Does anyone know is it comment do pay to open multiple instances of my application at the same time?
Thanks in advance.
(Labview 8.5, Win XP pro SP3)
-
multiple server Raduis on Cisco router configuration
I have a cisco router, who works as a PPPoE NAS Server I need to configure multiple raduis servers each one is dedicated to an interface, so I will each of my clients to authenticate via the server correct raduis
Thanks in advance
Hello
a brief overview of the steps config:
AAA new-model
create 2 separate radius servers, use the modern syntax with host and key in the same line
host 10.1.1.1 XXXXXXXXX RADIUS server key.
radius-server host 10.1.1.2 key XXXXXXXXX
Create 2 separate aaa-servers in a group radgroup1 and radgroup2 and add each of the servers to a server group aaa
aaa group server radius radgroup1
server 10.1.1.1
aaa group server radius radgroup2
server 10.1.1.2create 2 lists different servers as a method of authentication with groups aaa:
AAA authenticate ppp login1 group radgroup1
AAA authenticate ppp Connexion2 group radgroup2
Use the two authetications on what appropriate interfaces:
Router (config) #interface {name-of-interface-1}
Router(Config-if) #ppp login1 chap authentication
Router (config) #interface {name-of-interface-2}
Router(Config-if) #ppp Connexion2 chap authentication
Rgds,
MiKa
-
Tier, node, server instance
Regarding the image below, can someone explain the difference between the node level and instance.
From what I understand so far a node is a group of services on a physical computer. The Group services and the machine may be called an instance/server. Layer is a layer of separation.
According to the request document instance is the Group of Application services on a virtual machine(first node). It is the same for the database.
good for me, it's possible,
"1. production environment .
The production environment is constructed using two nodes allocated, where the instance of the Application is hosted on the first node and the instance of the database on the second node, respectively. These nodes are configured on virtualized environments Windows hyper V.
The application tier of the VMS server and the virtual machines of DB level are configured to use the physical space of the SAN storage. "This will give you the best performance of DB and level Apps such as they find locked independently on their own VMS with dedicated memory and other resources in order to avoid encroachment on each-other resources."
Thank you.
A node is not necessarily a physical machine. It may be a virtual machine as explained in the document that you are talking about.
A component can be spread over several nodes hosting various types of application services.
An instance is similar to an environment of installation for each type of service.
You say 'Instance of Production', which includes an application layer and a layer of database. Each of these levels is hosted on one or more nodes.
Kind regards
Bashar
-
Can I have multiple vCenter instances in a tenant unique vRA 6.2.4?
We would like to take advantage of groups of companies compared to the creation of another tenant (a company), but we cannot find information around best practices regarding this approach, i.e., multiple vCenters.
It is altogether possible through VRA in the existing tenant and the entrepreneurial group, you need to create a new endpoint and configure it for the new VC, follow best practices, you can install vSphere Agent on a different virtual machine.
Then you need create the Group of fabric and select the newly added cluster of vCenter.
Then you must have the option to call this different EGG based on demand of each group just pinching? to do.
You must create a file location by editing the datacenterlocations.xml file in the server, IAAS, you can call it in any case you need.
in VMware documentation that it is based on the logic of the location, if you need you can give VC name (VC-A-PROD, VC-B-LAB).
To do this, please see VMware documentation
by editin we're almost done, and now we need to call this named data center locations in the calculation of resources, go to the resource to calculate your new cluster is automatically generated since the creation of the Group of fabric, just edit the computing resources, select the location of data center filed in the LOCATION (say VC-B-LAB) tab.
Then is to change the output to calculate resources of VC-A , then select the location in the VC-A-PROD
Now you have done part mapping and you will need to create a reservation as usual and map it to the existing business, this allows two a booking for each group of companies, a VC - one point and the other points to VC - B.
Now, you need optimize the rightmost, I mean that whenever you ask the catalog, users should get an option to select the right places.
logically, the place to create the virtual machine. You must create several events in blue, in the Blues draw existing itself enable 'DISPLAY LOCATION on DEMAND'. This allowed users to select VC (EndPoint) at the request of catalogue and to automate the process.
Reference:
You also want to do one more thing, simply copy the blue print template to new VC without changing the name of the model.
I hope this helps.
-
Hello, I have a lot of customers who are located in the health sector, they have very dated material but we must keep the system state server and existing programs up to 20 years.
I've virtualized successfully some of their servers using the converter and operate them on VM Server 2.0; things are impeccable and they know even higher performance and then on their old material.
My question is this; VMWare Server is a sound archiving for instances of single server solution if a customer has only 1 server that must be kept for years, is interesting to use ESXi or ESX server purchase? Do you think that any restrictions on the use of VMServer to host this virtual machine (for the next few years) so the client will use to read only purposes? Is there another product VMware which will allow for read-only access on a network (Vm Player?)
What are others in the health sector to help clinics with a single server?
Thank you for all your comments on this, I'm using ESX server but with time in these situations, there is no way these customers will be hardware and software investments for 1 VM.
Thank you
Haymaker
Hello
For archiving purposes, VMware Server is a perfectly good option. Reader could also be used if you want to... You and the 'hosting' on which you store all this. It must be able to run the required number of virtual machines simultaneously.
Best regards
Edward L. Haletky VMware communities user moderator, VMware vExpert 2009URL = http://www.virtualizationpractice.com Virtualization practice analyst [url]
Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]
Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
[url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links |
[url =http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast] virtualization Security Table round Podcast [url]
Maybe you are looking for
-
When I click on an image or map that is Kijiji real estate pages, open Firefox all crunched on the right side of the page. How can I fix this?For example, I discovered an apartment ad that has various attached photos. It said click on the images to s
-
Hello So about three months ago I had a problem with my HP mouse and browser. both were glitching on screen and does not allow me to type consistently or right-click (to copy, paste, etc.). After seeking help from technology College friends, HP reps
-
Qosmio F60 - 14F - battery life
Hello world!I read a few topics on the life of the battery, the charge of a Yes, but I've always seen a cuple of questions.I bought a Toshiba Qosmio F60 - 14F a month ago and I am not so happy with the battery life. When I use my computer only to wri
-
New investment of Vista icon on the desktop
My Vista desktop is set to show medium icons, with autoarrange and snap to grid. Whenever I have create a new icon on the desktop (i.e. save a file it), it seems just under the computer icon in the upper left corner. However, I keep a number of ico
-
Catch the inevitable back with Javascript
Is it possible to catch the back key pressed event? I found the link by using the Widget API, would continue to operate the javascript even when I'm not using this api? My pure html code & javascript, is there another way to do it?